Table of Contents
Advertisement
HD Audio Controller [Enabled]
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]
PCIEX4_1 Slot Bandwidth [Auto]
[Auto]
[X1 Mode]
[X4 Mode]
PCIEX8_3 Slot Bandwidth [Auto]
[Auto]
[X8 Mode]
M2/U2 Switch [Auto]
[Auto]
[M.2 Mode]
[U.2 Mode]
Asmedia USB 3.1 Controller [Enabled]
This item allows you to enable or disable the Asmedia USB 3.1 controller of your system.
Configuration options: [Disabled] [Enabled]
Asmedia USB 3.1 Battery Charging Support [Disabled]
This item allows you to enable or disable the Asmedia USB 3.1 Battery Charging support of
your system.
Configuration options: [Disabled] [Enabled]
RGB LED(onboard) [Enabled]
[Disabled]
[Enabled]
3-26
Runs at AUTO mode with USB3.1_EC1, USB3.1_EA2 enabled and
PCIEX1_2 slot enabled.
Runs at x1 mode with USB3.1_EC1_EA2 port and PCIEX1_2 slot enabled.
Runs at x4 mode for a high performance support with USB3.1_EC1_EA2
ports and PCIEX1_2 slot disabled.
When a PCIe device higher than x4 interface is installed on the PCIEX8_3
slot, PCIEX16/X8_1 and PCIEX8_3 slots will automatically run at x8 mode.
PCIEX16/X8_1 and PCIEX8_3 slots run at x8 mode. Supports x1/x2/x4/x8
devices.
The bandwidth will be switched to U.2 by default. When a M.2 device is
detected, the bandwidth will automatically be switched to M.2.
The bandwidth will be switched to M.2 with U.2 disabled.
The bandwidth will be switched to U.2 with M.2 disabled.
LEDs will not light up.
LEDs will always light up at the S0(Working), S3(Sleep), and S5(Soft off)
states, but not at the S5 state when the ErP Ready is enabled.
Chapter 3: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
