Reset; Baud; Parity; Stop Bit - OHAUS T51P Instruction Manual
5000 series
Hide thumbs
Also See for T51P:
- Instruction manual (64 pages) ,
- Service manual (42 pages) ,
- User manual (61 pages)
Table of Contents
Advertisement
EN-36
3.10.1 Reset
Set the COM1 and COM2 menu to factory defaults.
NO
= not reset.
YES = reset.
3.10.2 Baud
Set the Baud rate.
300
= 300 bps
600
= 600 bps
1200
=1200 bps
2400
= 2400 bps
4800
= 4800 bps
9600
= 9600 bps
19200
= 19200 bps
3.10.3 Parity
Set the data bits and parity.
7 EVEN
7 Odd
7 NONE = 7 data bits, no parity.
8 NONE = 8 data bits, no parity.
3.10.4 Stop Bit
Set the number of stop bits.
1
= 1 stop bit.
2
= 2 stop bits.
3.10.5 Handshake
Set the flow control method.
NONE
ON-OFF
HArd
3.10.6 Address
Set the communication address.
NOTE: Address is only displayed in the COM2 menu if the RS422/RS485 option is installed.
OFF
01 to 99
Find Quality Products Online at:
= 7 data bits, even parity.
= 7 data bits, odd parity.
= no handshaking.
= XON/XOFF software handshaking.
= hardware handshaking.
= no address.
= address 01 to 99
GlobalTestSupply
www.
5000 Series Indicators
.com
sales@GlobalTestSupply.com
•
•
•
- Quick Links:
- Calibration Menu
- Troubleshooting
- Specifications
Hide quick links:
Advertisement
Table of Contents
