Table of Contents
Advertisement
Custom Settings
(CUSTOM SETUP)
"CUSTOM SETUP" allows you to set the playback
conditions.
The default settings are underlined.
Select "CUSTOM SETUP" in the setup display.
CUSTOM SETUP
COMPONENT OUT:
LINE:
AUTO PLAY:
DIMMER:
PAUSE MODE:
BOOKMARK RESET
PARENTAL CONTROL
PLAYBACK MEMORY:
TRACK SELECTION:
To set, press
To quit, press
DISPLAY
x COMPONENT OUT
Selects the methods of outputting video signals from the
COMPONENT VIDEO OUT (Y, C
connectors on the rear panel of the player.
In order to set COMPONENT OUT to ON, you must first
connect the player to a projector or monitor using the
LINE-1 connector so that the setup display appears on
your screen.
• OFF: outputs no signals.
• ON: outputs the component video signals.
Notes
• When you set "LINE" to "RGB", you cannot set
"COMPONENT OUT" to "ON."
• When you connect the player to a monitor or projector via only
the COMPONENT VIDEO OUT connectors, do not select
"OFF." If you select "OFF" in this case, the picture may not
appear.
x LINE
Selects the methods of outputting video signals from the
LINE-1(RGB)–TV connector on the rear panel of the
player.
• VIDEO: outputs the video signals.
• S VIDEO: outputs the S video signals.
• RGB: outputs the RGB signals.
Notes
• If your TV does not conform to the S video or the RGB signals,
no picture appears on the TV screen even if you select "S
VIDEO" or "RGB." Refer to the instructions supplied with
your TV.
• If your TV has only one SCART (EURO AV) connector, do not
select "S VIDEO."
60
OFF
VIDEO
OFF
BRIGHT
AUTO
ON
OFF
, then
ENTER
.
.
/B-Y, C
/R-Y)
B
R
x AUTO PLAY
Selects the Auto Play setting when you connect the AC
power cord to the AC outlet.
• OFF: does not use "TIMER," "DEMO1" or "DEMO2" to
start playback.
• TIMER: starts playing when the player is turned on, or
at any time you want when connected to a timer (not
supplied). Set the timer when the player is in standby
mode (the power indicator lights up in red).
• DEMO1: starts playing the first demonstration
automatically.
• DEMO2: starts playing the second demonstration
automatically.
x DIMMER
Adjusts the lighting of the front panel display.
• BRIGHT: makes the front panel display bright.
• DARK: makes the front panel display dark.
• OFF: turns off the lighting of the front panel display.
x PAUSE MODE (DVD only)
Selects the picture in pause mode.
• AUTO: A picture, including subjects that move
dynamically, is output with no jitter. Normally select
this position.
• FRAME: A picture including subjects that do not move
dynamically is output with high resolution.
x BOOKMARK RESET,
Select "BOOKMARK RESET." The BOOKMARK reset
display appears. And then press ENTER to reset all
bookmarks.
x PARENTAL CONTROL,
Sets a password and playback limitation level for DVDs
with playback limitation for children.
The same password is used for both Parental Control and
Custom Parental Control (page 42) .
For details, see "Limiting Playback by Children (Parental
Control) ."
Hide quick links:
Advertisement
Table of Contents
