Table of Contents
Advertisement
1SVC 440 795 M1100
Figure: 13:
Screw fasten the display module
X
The tightening torque must be between 1.2 and 2 Nm
h
Ensure that the correct torque is used. If the tightening
torque is too low or high, this may impair the seal.
Figure: 14:
Removing the display module (flush mounting)
Unscrew the fixing element and remove the display module.
X
Mounting
2 x
Screw fastening the display module
Rear of mounted display module
37
Advertisement
Chapters
Table of Contents
