Table of Contents
Advertisement
Note
• The FEL lock cannot be set when a flash is not attached.
• If a flash that does not support the FEL lock is attached, an error message is
displayed.
• When both AE and FEL lock are fixed,
Wireless Flash
There are two methods for wireless flash shooting: light-signal flash
shooting that uses the light of the flash attached to the camera as a signal
light, and radio-signal flash shooting that uses wireless communication. To
perform radio-signal flash shooting, use a compatible flash or the Wireless
Radio Commander (sold separately).
For details on how to set each method, refer to the instruction manual of
the flash or the Wireless Radio Commander.
1
MENU
Off: Does not use the wireless flash function.
On: Uses the wireless flash function to make an external flash or flashes
emit light at a distance from the camera.
2
Remove the shoe cap from the camera, and then attach the
flash or the Wireless Radio Commander.
• When performing light-signal wireless flash shooting, set the
attached flash as the controller.
When performing radio-signal wireless flash shooting with a flash
attached to the camera, set the attached flash as the commander.
3
Set up an off-camera flash that is set to wireless mode, or that
is attached to the Wireless Radio Receiver (sold separately).
• You can perform a test flashing by assigning the [Wireless Test Flash]
function to a custom key using [
that key.
GB
142
(Camera Settings 1) [Wireless Flash] [On].
lights up.
Custom Key], and then pressing
Advertisement
Table of Contents
