Table of Contents
Advertisement
USB mouse
Problem
On-screen pointer
does not respond to
mouse operation
Double-clicking does
not work
The mouse pointer
moves too fast or too
slow
The mouse pointer
moves erratically
SD/MuliMedia Card
Refer also to Chapter 8,
Problem
Memory card error
occurs
You cannot write to
the memory card
You cannot read a file Make sure the target file is on the memory card
User's Manual
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click sped setting in the
mouse control utility
1. Open the Control Panel and Printers and
Other Hardware, select the Mouse icon and
press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel and Printers and
Other Hardware, select the Mouse icon and
press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
The mouse might be dirty. Refer to your mouse
documentations for instructions on cleaning.
If problems persist, contact your dealer.
Optional
Devices.
Procedure
Reseat the memory card to make sure it is firmly
connected.
Check the card's documentation.
Make sure the card is not write protected.
inserted in the slot.
If problems persist, contact your dealer.
Troubleshooting
9-8
- Quick Links:
- Recovery Options
Hide quick links:
Advertisement
Table of Contents
