Additional
Information
After try:ing the methods
below, if the problem
persists,
contact your nearest Sony dealer.
No picture
(screen
not lit), no sound
,"_Make sure the power
cord is connected
securely.
-_Check
to see if the TV/VIDEO
setting is
correct: when watching
TV, set to TV, and
when watching
video tapes, set to VIDEO.
(pages 19, 20)
Before you use the projection
TV, cable box
or DSS receiver, make sure to press the
corresponding
FUNCTION
button
on the
remote commander.
(pages 19, 42)
•"_ Try another
channel.
It could be station
trouble.
Poor or no picture (screen lit), good sound
•"bAdjust PICTURE in the VIDEO menu. (page
23)
"_Adjust
BRIGHTNESS
in tile VIDEO menu.
(page 23)
Adjust the convergence.
(page 16)
Check antenna/cable
connections.
(page 6)
Good picture,
no sound
Press MUTING so that "MUTING"
disappears
from the screen. (page 20)
•_Check
the MTS setting in tile AUDIO menu.
(page 26)
"_Make
sure SPEAKER is set to ALL ON or Li
R OFF in the AUDIO menu. (page 27)
No color
"_Adjust
COLOR in the VIDEO menu. (page
23)
='_ Confiml
that a black and white program
is
not being broadcast.
Only snow
and noise
appear
on the screen
•-bCheck
the CABLE setting in the SET UP
menu. (page 16)
Check the antenna/cable
connections.
(page 6)
"_Make
sure the channel
is broadcasting
programs.
44"EN
I Additional Information
Dotted
lines or stripe:s
Adjust the antenna.
."_Move
the proiection
TV away from noise
sources such as cars, neon :signs, and hair-
dryers.
Double
images or ghosts
"_ Use a highly directional
o_tdoor
antenna
or a cable (_vhen the problem
is caused by
reflections
from nearby mountains
or tall
buildings.)
Cannot
operate
menu
•"_ If the item ycu want to choose appears
in
grey, you cannot select it. Press TV!VIDEO
correctly.
•"_Check
the CABLE setting !.n the SET UP
menu. (page 16)
Cannot receive uppelr channels
('UHF) when
using an antenna
•"_Check it: CABLE is OFF in the SET UP
menu. (page 16)
Use AUTO I-"ROGRAM to add receivable
channels
that are not presently
in the
memory.
(page 17)
Cannot
receive
any channels when using cable
TV
-_Check
if CA{3LE is ON in the SET UP
menu.
(page 16)
•'_ U_;e AUTO PROGRAM
tc add receivable
channels
that are not presently
in the
memory.
(pages
17)
Remote
commander
does not operate
-'_Battery coulct be weak.
Replace the
battery.
(page 13)
Make sure the projection
TV's power cord
is connected
securely
to wall outlet.
Press TV ];ILNCTION when operating
your
projectior
TV.
Are fluorescent
lights too close to the
projectior_ TV? Move lights at least 3 - 4
feet away from the projection
TV.