Table of Contents
Advertisement
Locations and Functions of Parts
Operation Panel
1 Memory Stick slot
1 Memory Stick slot
Insert a Memory Stick to store setting data, such as
reference files and scene files of the video camera or
camera control unit.
2 MEMORY STICK (Memory Stick access) lamp
The lamp shows the status of the Memory Stick.
Off: No Memory Stick is inserted.
Lit in green: There is a Memory Stick in the slot. In
this condition, you can safely eject the Memory
Stick.
Lit in red: Data are being read/written. If you eject
the Memory Stick in this condition, the data are
not guaranteed. All the data may be lost.
For details on Memory Sticks, see page 28(E).
3 PANEL ACTIVE button
4 STANDARD button
2 MEMORY STICK lamp
Rubber cap
PANEL
STANDARD
ACTIVE
MEMORY
STICK
MONITOR
FUNCTION
VF DISP
MAINTENANCE
VF MENU
SCENE
CANCEL
PAINT
ENTER
ALARM
MENU SELECT
BRIGHT
qa Menu operation block
0 ALARM indicator
5 Spare button
6 Test signal output select buttons
7 CLOSE button
8 VTR START/STOP button
TEST
BARS
CLOSE
VTR
START/STOP
ABB
AWB
WHITE
BLACK
IRIS/MB
AUTO
ACTIVE MASTER
IRIS
BLACK
EXT
IRIS
CONTRAST
REMOTE CONTROL UNIT RM-B750
qs Iris/master black control block
3 PANEL ACTIVE button
Press to select the control mode for the connected
camera system. Each time you press the button with
the factory setting, the control mode cyclically
switches among FULL, PART, and LOCK modes.
FULL mode: All controls from this unit are enabled
(panel active status). Both this button and the
IRIS/MB ACTIVE indicator in the iris/master
black control block light.
PART mode: Controls only from the iris/master black
control block are enabled (iris/master black active
status). This button goes dark, but the IRIS/MB
ACTIVE indicator stays lit.
LOCK mode: All controls from this unit are disabled
(lock status). Both this button and the IRIS/MB
ACTIVE indicator in the iris/master black control
block go dark.
9 VTR playback control
buttons
qd White balance/black
balance control block
5(E)
Advertisement
Chapters
Table of Contents
