hit counter script
Sony RDR-HX1010 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Recorder
  5. RDR-HX1010
  6. Service manual

Sony RDR-HX1010 Service Manual

Hide thumbs Also See for RDR-HX1010:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
System
Laser: Semiconductor laser
Channel coverage:
PAL/SECAM (B/G, D/K, I, L)
VHF: E2 to E12, R1 to R12, F2 to F10, Italian
A to H, Ireland A to J, South Africa 4 to 13/
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69/CATV: S01 to S05, S1 to S20,
France B to Q/HYPER: S21 to S41
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances.
Video reception: Frequency synthesizer system
Audio reception: Split carrier system
Aerial out: 75-ohm asymmetrical aerial socket
Timer: Clock: Quartz locked/Timer indication:
24-hour cycle (digital)/Power back-up
duration: 1 hour
Video recording format: MPEG Video
Audio recording format/applicable bit
rate: Dolby Digital 2 ch/256 kbps
Inputs and outputs
LINE 2 OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.3 Vp-p (PAL)
RDR-HX1010
SPECIFICATIONS
LINE 2 IN/LINE 4 IN
(AUDIO): Phono jack/2 Vrms/more than
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.3 Vp-p (PAL)
LINE 1 – TV: 21-pin
CVBS IN/OUT
S-Video/RGB OUT (upstream)
LINE 3/DECODER: 21-pin
CVBS IN/OUT
S-Video/RGB IN
S-Video OUT (downstream)
Decoder
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (OPTICAL): Optical output jack/
–18 dBm (wave length: 660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT
(Y, P
/C
, P
/C
):
B
B
R
R
Phono jack/Y: 1.0 Vp-p, P
/C
: 0.7 Vp-p,
B
B
P
/C
: 0.7 Vp-p
R
R
HDMI OUT: Type A (19-pin)
RMT-D217P
AEP Model
General
Power requirements: 220-240 V AC, 50/
60 Hz
Power consumption: 55 W
Dimensions (approx.): 430 ⋅ 75 ⋅ 328 mm
(width/height/depth) incl. projecting parts
Hard disk drive capacity: 400 GB
Mass (approx.): 5.2 kg
Operating temperature: 5ºC to 35ºC
Operating humidity: 25% to 80%
Supplied accessories:
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to change
without notice.
Compatible colour systems
This recorder is designed to record using the PAL
colour system and play back using the PAL or
NTSC colour systems.
The signals of the SECAM colour system can be
received or recorded but played back in the PAL
colour system only. Recording of video sources
based on other colour systems cannot be
guaranteed.
DVD RECORDER

Advertisement

Table of Contents
loading

Related Manuals for Sony RDR-HX1010

Summary of Contents for Sony RDR-HX1010

  • Page 1 RDR-HX1010 RMT-D217P SERVICE MANUAL AEP Model SPECIFICATIONS System General LINE 2 IN/LINE 4 IN (AUDIO): Phono jack/2 Vrms/more than Laser: Semiconductor laser Power requirements: 220-240 V AC, 50/ Channel coverage: 22 kilohms 60 Hz (VIDEO): Phono jack/1.0 Vp-p PAL/SECAM (B/G, D/K, I, L) Power consumption: 55 W Dimensions (approx.): 430 ⋅...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SERVICE NOTE Notes About This Recorder ················································· 1-25 About i.LINK ······································································· 1-26 DISK REMOVAL PROCEDURE IF THE TRAY Guide to Parts and Controls ················································· 1-26 CANNOT BE EJECTED (FORCED EJECTION) ············ 5 Glossary ··············································································· 1-27 Language Code List ····························································· 1-28 BOARDS CONNECTION ·················································...
  • Page 4 • MI-056 (2/4) (IHDMI TH) IC PIN FUNCTION DESCRIPTION SCHEMATIC DIAGRAM ···························· 4-31 5-1. IT CONTROL IC (IC604: M306H3MC-058FPUO (AV-089 • MI-056 (3/4) (216MBit DAC, 75Ω BUFFER) BOARD)) ········································································ 5-1 SCHEMATIC DIAGRAM ···························· 4-33 5-2. CPU (IC104: HD6417306BL200AV (RD-058 BOARD)) ··· •...

  • Page 5: Service Note

    SERVICE NOTE 1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) Remove the upper case. Insert the stiff wire in the hole and eject the tray. Hole Open the tray Fig. 1 The stiff wire Fig. 2 2.
  • Page 6 MEMO — 6 —...

  • Page 7: General

    The S system is Copyrights done at the discretion of Sony. All permanent damage to your Should any solid object or liquid fall manufactured under license from contents of the hard disk drive will •...

  • Page 8: Quick Guide To Disc Types

    Quick Guide to Disc Types Recordable and playable discs Recording Features Editing Features Icon used in Formatting Compatibility with other DVD Type Disc Logo this manual (new discs) players (finalising) Auto Manual Record Change Delete Rewrite A-B Erase Playlist Chapter Chapter 16:9 sizes title name...

  • Page 9: Hookups And Settings

    Step 2: Connecting the Aerial Cable Hookups and Settings Connect the aerial cable by following the steps below. Do not connect the mains lead until you reach Hooking Up the Recorder “Step 5: Connecting the Mains Lead” on page 18. Follow steps 1 to 7 to hook up and adjust the settings of the recorder.

  • Page 10: Step 4: Connecting The Audio Cords

    – Connect the recorder to the TV with a video cord t TV/VIDEO Notes other than HDMI cord (component video cord, • If the supplied remote interferes your other Sony DVD S VIDEO cord, or audio/video cord). recorder or player, change the command mode number to mains Manufactured under license from Dolby Laboratories.

  • Page 11: Step 7: Easy Setup

    Sony DVD recorder or player, set the command (for SCART connections only) mode number for this recorder and the supplied When the TV/DVD switch is set to DVD, the remote to one that differs from the other Sony SETUP t TV/VIDEO button switches between the Number buttons DVD recorder or player.

  • Page 12: Connecting To A Satellite Or Digital Tuner

    Connecting to the LINE 2 IN or LINE 4 IN jacks Connecting to a Satellite or Digital Tuner Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If the Connect a satellite or digital tuner to this recorder using the LINE 3/DECODER jack.

  • Page 13: Seven Basic Operations - Getting To Know Your Dvd Recorder

    Select “System,” and press ENTER. To return to the previous step Formatting a DVD disc (Disc Info) Press O RETURN. Seven Basic Operations Settings - Channel Setting Prog. 6 — Getting to Know Your DVD Recorder System : - RW - RW Notes Video...

  • Page 14: Playing The Recorded Programme (Title List)

    About the Teletext function Select a title, and press ENTER. Title List with Thumbnail Images (Example: 3. Playing the Recorded DVD-RW in VR mode) Some broadcasts systems ensure a Teletext The sub-menu appears. service* in which the complete programmes and The sub-menu displays options applicable Programme (Title List) their data (title, date, channel, recording start time...

  • Page 15: Changing The Name Of A Recorded Programme

    Press </M/m/, to select the character To use the number buttons Example: When playing a VIDEO CD 5. Changing the Name of a you want to enter, and press ENTER. You can also use the number buttons to enter Playing time and number of the current characters.

  • Page 16: Timer Recording

    Recording mode Recording time Unfinalising a disc (hours) Timer Recording - RW - RW DVD* Video Before Recording HQ (High quality) For DVD-RWs (Video mode) DVD-RW (Video mode) that have been finalised 1 hr. to prohibit additional recording or editing can be 30 min.
  • Page 17 z Hint To stop recording during timer recording If the timer settings overlap Recording TV programmes using Open the remote’s cover and press x REC STOP. You can play the recorded programme by selecting the Overlapped timer settings are shown as follows. programme title in the Title List.

  • Page 18: Checking/Changing/Cancelling Timer Settings

    When the timer settings overlap Notes : Indicates that the Update function is set. • If one programme contains two picture sizes, the Checking/Changing/ The programme that starts first has priority and the selected size is recorded. However, if the 16:9 signal When all of the timer settings do not fit on the second programme starts recording only after the Cancelling Timer Settings...

  • Page 19: Playback

    To play restricted DVDs (Parental Control) * TVS was developed by Sony to produce home surround sound with just a stereo If you play a restricted DVD, the message “Do you want temporarily change parental control to *?”...
  • Page 20 Press </, to adjust the setting, and Buttons Operations Adjusting the picture quality press ENTER. Fast reverses/fast forwards the disc when pressed during playback. The default settings are underlined. (fast reverse/fast forward) Search speed changes as follows: - RW - RW Video Y NR : (weak) Off...

  • Page 21: Searching For A Title/Chapter/Track, Etc

    Searching by title number or time Selecting an MP3 album or track Searching for a Title/ Playing MP3 Audio Tracks code Chapter/Track, etc. or JPEG Image Files Press TITLE LIST. The album list appears. - RW - RW Video DATA DVD DATA CD To change the page, press DATA DVD...

  • Page 22: Erasing And Editing

    z Hints To create and edit Playlist titles About playback order of albums, • If you add numbers (01, 02, 03, etc.) to the front of the A Playlist is a group of Playlist titles created from track/file names when you store the tracks (or files) in Erasing and Editing tracks, and files the original title for editing purposes.

  • Page 23: Creating And Editing A Playlist

    Select a title by pressing </,, and Notes Dividing a title (Divide) Erasing all titles on the disc • Images or sound may be momentarily interrupted at the press ENTER. point where you erase a section of a title. The display for selecting titles to be erased •...

  • Page 24: Dubbing (Hdd Y Dvd)

    Rec Mode Conversion Dubbing • For a title whose picture size (16:9 or 4:3) is Required times for High-speed Dubbing from mixed: HDD to DVD (for 60-minute programme) - RW - RW Video Dubbing (HDD y DVD) – When dubbed from the HDD to DVD-RW Speed 2.4x (Video mode) or DVD-R, the picture size is...

  • Page 25: Dv Dubbing

    To adjust the settings for each title To automatically adjust the dubbing mode Notes • The DV IN jack is for input only. It will not output (Auto Dub Mode) You can make detailed settings for each of the DV Dubbing signals.

  • Page 26: Settings And Adjustments

    Select “DV EDIT,” and press ENTER. Select “OK,” and press ENTER. Select “OK,” and press ENTER. The display asks if you want to start selecting A new Scene List menu appears with the The default title name is fixed, and the display scenes.

  • Page 27: Video Settings (Video)

    Corre- Channel Receivable Corre- Channel Receivable Channel List (Changing/Disabling TV Guide Page sponding Frequency range sponding Frequency range the channels) channel number (MHz) channel number (MHz) Some broadcast systems ensure a Teletext 156.75–164.75 443.25–451.25 service* in which the complete programmes and Changes or disables the programme positions after their data (title, date, channel, recording start time, 164.75–172.75...

  • Page 28: Audio Settings (Audio)

    4:3 Output Progressive Mode Line3 Input 16:9 Selects a method of inputting video signals for the This setting is effective only when you set “TV DVD software can be divided into two types: film LINE 3/DECODER jack. The picture will not be Type”...

  • Page 29: Recording And Parental Control Settings (Features)

    Mode switch on the remote to the setting made manually. Select “SETUP,” and press ENTER. here. For details, see “If you have a Sony DVD Records the sub sound for the player or more than one Sony DVD recorder” on Select “Options,”...

  • Page 30: Easy Setup (Resetting The Recorder)

    Should any problem persist, so that the PROGRESSIVE indicator turns off and Select “SETUP,” and press ENTER. consult your nearest Sony dealer. the recorder is set to normal (interlace) format. , You are playing a DVD recorded in a colour Select “Easy Setup,”...

  • Page 31: Self-Diagnosis Function (When Letters/Numbers Appear In The Display)

    LOCKED” appears in the front panel display. Turn off the connected equipment and set the , It will take a few seconds for the recorder to input , Contact your Sony dealer or local authorized recorder to Synchro-Rec standby mode Remote control disc data before recording can stop.

  • Page 32: About I.link

    About the name “i.LINK” Required i.LINK cable i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a Use the Sony i.LINK 4-pin-to-4-pin cable (during trademark approved by many corporations. DV dubbing).

  • Page 33: Glossary

    Front panel Front panel display DVD RW NICAM HDMI PROGRESSIVE SMARTLINK A HDD/DVD indicators F Displays the following (35): A [/1 (on/standby) button (22) DV IN jack (77) Displays the selected media and the • Playing time/remaining time B Front panel display (35, 109) K ONE-TOUCH DUB button (79) •...

  • Page 34: Language Code List

    HDMI (High-Definition Multimedia Interface) Title (page 60) Language Code List HDMI is an interface that supports both video and The longest section of a picture or music feature audio on a single digital connection. The HDMI on a DVD, movie, etc., in video software, or the For details, see page 87.

  • Page 35: Disassembly

    RDR-HX1010 SECTION 2 DISASSEMBLY NOTE: The following flow chart shows the disassembly procedure. SECTION 2 DISASSEMBLY NOTE: The following flow chart shows the disassembly procedure. Case block assembly (Page 2-2) DVD section Hard disk section Tray cover assembly D. C. fan...

  • Page 36: Case Block Assembly

    NOTE: Follow the disassembly procedure in the numerical order given. 2-1. CASE BLOCK ASSEMBLY 3 Case block assembly 2 Three tapping screws (+BV 3 x 10) 1 Two tapping screws 2-2. TRAY COVER ASSEMBLY 3 Two claws Hole 4 Tray cover assembly 2 Open the tray 1 The stiff wire...

  • Page 37: Front Panel Section

    2-3. FRONT PANEL SECTION 2 Front panel section 1 Seven claws 2-4. SLIDE DOOR 1 Tapping screw (+B 2.6 x 6) 2 Door (spring) 6 Slide door 3 Tapping screw (+B 2.6 x 6) 4 Door (spring) 5 Four claws...

  • Page 38: Board, Fr-232 Board

    2-5. FL-144 BOARD, FR-232 BOARD 4 FL cover 6 Flexible flat cable 3 Connector (FAF-001) (CN101) (CN1302) 5 FL-144 board 2 Two tapping screws (+BV 3 x 8) (CN1301) (CN102) 1 Flexible flat cable (FFS-001) 8 Cursor 7 Connector (CN103) 9 Three tapping screws (+BV 3 x 8) 0 FR-232 board...

  • Page 39: Hard Disk

    2-7. HARD DISK 6 Hard disk section 7 HDD shield plate 1 Connector 8 Two tapes 9 Flexible flat cable (FRH-002) (CN1802) 5 Hard disk base, 0 Flexible cover Four dampers 3 Ground spring (HDD) 4 Ground spring (HDD) qs Hard disk qa CN-243 board 2 Four screws 2-8.

  • Page 40: Dvd Drive

    2-9. DVD DRIVE 3 Two tapping screws (+B 3 x 3) 8 Flexible cover 2 Harnesses 4 MD (L) bracket 7 MD (R) bracket 1 Remove the harnesses in the direction of the arrow. 0 DVD drive 6 Two tapping screws (+B 3 x 3) 5 Flexible flat cable (FRD-002)

  • Page 41: Board

    2-11.ER-036 BOARD 4 Flexible flat cable (FME-004) (CN107) 5 ER-036 board 2 Flexible flat cable (FAE-007) (CN105) 1 Four tapping screws (+BV 3 x 10) 3 Flexible flat cable (FAE-007) (CN106) 2-12.RD-58 BOARD 2 Flexible flat cable (FRD-002) (CN602) 6 Four tapping screws 3 Flexible flat cable (+BV 3 x 8) 1 Connector...
  • Page 42 2-13.AV-089 BOARD 1 Two tapping screws (+BV 3 × 8) 2 RD bracket Flexible flat cable Flexible flat cable (FMA-18) (CN802) (FAE-007) (CN901) 7 Connector Flexible flat cable (CN1201) (FAE-007) (CN902) Tapping screw 5 Connector (+BV 3 x 8) (CN701) 0 Three tapping screws 4 Connector (+BV 3 x 8)
  • Page 43 2-14.POWER SUPPLY BLOCK 1 Connector (CN2) 3 Three tapping screws (+BV 3 x 8) 2 Connector (CN3) 6 Remove the Power supply block in the direction of the arrow. 4 Tapping screw (+BV 3 x 8) 5 Tapping screw (+P 3 x 8) 2-15.D.

  • Page 44: Board

    2-16.CIRCUIT BOARDS LOCATION Power supply block ER-036 board CN-243 board MI-056 board FL-144 board AV-089 board RD-58 board FR-232 board 2-10E...

  • Page 45: Block Diagrams

    RDR-HX1010 SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/2) CN-243 AV-089 BOARD (1/2) RD-058 BOARD BOARD J702 IC701 VIDEO RECVY IC1202 RECCCR RECR,RECG,RECBCB,RECVY,RECCCR IDE D0-D15 LINE 4 IN VIDCARV0-7 BUF CAR V0-V7 CRB AT1D0-D15 VIDCARV0-7 VIDEO S VIDEO V DEC...

  • Page 46: Overall Block Diagram (2/2)

    RDR-HX1010 3-2. OVERALL BLOCK DIAGRAM (2/2) AV-089 BOARD FR-232 BOARD Q401 CN1201 UNSW 12V IC1201 TU VIDEO X601 FAN 12V BUFFER TU401 32.768KHz FAN DRIVE FAN ON Q403 SENS D605 IC602 Q101,102 TUDV XIT RST BUFFER CN101 UNSW6V LED DIM...

  • Page 47: Block Diagram

    RDR-HX1010 3-3. RD-058 BLOCK DIAGRAM (1/2) RD-058 BOARD (1/2) CN-243 Q1201 17,15 BOARD CN1701 13,11 RECVY RECVY AC7,AD6,AE6 BUFF 72-74 AF14,AE14,AC13 AD5,AE5,AF5 VIDCARV0-7 BUF CAR V0-7 76-80 AB12,AD,12,AF12 AE4,AF4 RECBCB AF11,AF10,AE10 RECBCB CRB AT1D0-15 IDE D0-D15 AD11,AE12,AC12 8,10 VIDCARHD,VIDCARVD BUF CAR HD,BUF CAR VD...
  • Page 48 RDR-HX1010 3-4. RD-058 BLOCK DIAGRAM (2/2) RD-058 BOARD (2/2) IC201 AWAKE DONE IC105 IC306 STATUS1 (2/3) (2/2) XFLMCS0 IC202 AV-089 UNHD0-31 XAMUTE XFLMRST5 BOARD XVMUTE XFLMRST3 128M CN502 CN1702 FLASH XUNRD1 MEMORY XUNWE0,2 UNHA2-24 XFLMCS0 IC110 IC107 ITREQ5 VSYNC SHAWAKE DONE...
  • Page 49 RDR-HX1010 3-5. ER-036 BLOCK DIAGRAM ER-036 BOARD IC105 V IN AUX CVBS/Y R IN BUFFER AUX R/C G IN AUXG BI/CQ AUXB Q104-109 C OUT BLAKING IN CN103 FUNCTION SW IN LINE 3/ DECODER CN105 XVMUTE ALL MUTE V/Y OUT...
  • Page 50 RDR-HX1010 3-6. MI-056 BLOCK DIAGRAM MI-056 BOARD IC402 CN201 SM_T_SCL CSCL TX2+ TMDS DATA2+ X401 HDMI 8MHz CONT SM_T_SDA CSDA TX2- TMDS DATA2- CN401 SM_DDC_SCL DSCL TX1+ TMDS DATA1+ XEXRSTT SM_DDC_SDA DSDA TX1- TMDS DATA1- DLON XTXRST TX0+ RESET TMDS DATA0+...

  • Page 51: Power Block Diagram (1/2)

    RDR-HX1010 3-7. POWER BLOCK DIAGRAM (1/2) CN502 SWITCHING REGULATOR(POWER BLOCK) UNSW6VA UNSW6V Q107,108 UNSW12V CN101 T101 D101 L101,102 INLET LINE CONVERTER Q301 Q106,109 D301 L301 D304 TRANSFORMER P301 1.25A LINE UNSW -8V SW-10V F101 UNSW 12V AC IN FILTER 3.15A 250V...

  • Page 52: Power Block Diagram (2/2)

    RDR-HX1010 3-8. POWER BLOCK DIAGRAM (2/2) RD-058 BOARD ER-036 BOARD CN101 UN3.3V IC301 IC106 PCONT UN5V IC108 AUDIO PROCESS AUDIO I/O IF IC105 IC107 IC110 IC101 IC104 IC109 SW3.3V PS102 BUFFER BUFFER EEOROM BUFFER CN106 0.5A FL101 AV-089 L301 SH SW1.5VA...

  • Page 53: Schematic Diagrams And Printed Wiring Boards

    RDR-HX1010 SECTION 4 SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS 4-1. FRAME SCHEMATIC DIAGRAM J1301 LINE 2 OUT LINE 4 IN J702 LINE1-TV LINE 3/DECODER COMPONENT VIDEO OUT HDMI OUT AERIAL DIGITAL IN/OUT CN802 CN301 SW5V SW5V SW5V SW5V UNSW-8V UNSW-8V...

  • Page 54: Schematic Diagrams

    RDR-HX1010 4-2. SCHEMATIC DIAGRAMS WAVEFORMS BOARD BOARD BOARD AV-089 ER-036 RD-058 THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) X601 J801 S-VIDEO Y CN103 ql X102 (For schematic diagrams) •...

  • Page 55: 1/8) (Power Supply)

    RDR-HX1010 AV-089 BOARD(1/8) POWER SUPPLY NO MARK:REC/PB MODE R157 -REF.NO.:10,000 SERIES- CN102 UNSW6V JL107 UNSW12V UNSW12V JL108 R143 TO(3/8) UNSW4V SW-10V DGND UNSW4V JL109 R144 JL110 UNSW6V JL111 UNSW12V UNSW6VB C132 TO(7/8) SWITCHING REGULATOR R163 SW5V 220u UNSW6VB (SEE PAGE 4-64)

  • Page 56: 2/8) (Audio A/V Conv.)

    RDR-HX1010 AV-089 BOARD(2/8) AUDIO A/V CONV. R205 -REF.NO.:10,000 SERIES- NO MARK:REC/PB MODE R203 C211 C213 C214 C218 VIDEO SIGNAL AUDIO C221 CHROMA Y/CHROMA SIGNAL R224 R228 R226 R227 R223 ± 0.5% ± 0.5% ± 0.5% TU5V TU5V TO(4/8) TO(4/8) TUDV...
  • Page 57 RDR-HX1010 AV-089 BOARD(3/8) NO MARK:REC/PB MODE R :REC MODE AUDIO OUT P :PB MODE -REF.NO.:10,000 SERIES- R307 8200 R322 ± 0.5% 1500 AOUTL- C310 R324 R308 560p 8200 ± 0.5% ± 0.5% AOUTL+ C319 R314 R352 R364 R320 C312 150p...
  • Page 58 RDR-HX1010 AERIAL TU401 TUNER AV-089 BOARD(4/8) IC401 TUNER 30V REG XX MARK:NO MOUNT IC401 TK11819MTL L401 L403 -REF.NO.:10,000 SERIES- 10uH JL401 V-IN 10 11 12 13 14 15 16 17 NO MARK:REC/PB MODE R475 R420 33.6 32.4 V-OUT L404 C449...

  • Page 59: 5/8) (System Control)

    RDR-HX1010 For Schematic Diagram • Refer to page 4-3 for waveforms. AV-089 BOARD(5/8) NO MARK:REC/PB MODE SYSTEM CONTROL R :REC MODE P :PB MODE -REF.NO.:10,000 SERIES- PS602 0.5A -7.5 -7.5 -7.5 UNSW-8V -5.6 R620 CN602 17P C667 JL669 Q608 Q602...

  • Page 60: 6/8) (Video Input Select)

    RDR-HX1010 AV-089 BOARD(6/8) VIDEO INPUT SELECT -REF.NO.:10,000 SERIES- NO MARK:REC/PB MODE VSYNC TO(5/8,8/8) TU_SDA TU_SCL TO(4/8,5/8,7/8) AU3INR AU3INL TO(2/8) FA_INR FA_INL CN701 JL701 C705 S2 SW 0.01u JL702 Y2 IN JL703 C706 AN GND 0.01u JL704 C718 FL-144 BOARD C2 IN...

  • Page 61: 7/8) (Video Amp)

    RDR-HX1010 For Schematic Diagram • Refer to page 4-3 for waveforms. AV-089 BOARD(7/8) L803 22uH VIDEO AMP XVMUTE XX MARK:NO MOUNT TO(8/8) Q808 Q807,808 MUN2113T1 SWITCH EUAUOUTL -REF.NO.:10,000 SERIES- XNENTMUTE EUAUOUTL EUAUOUTR EUAUOUTR NO MARK:REC/PB MODE WIDE TO(5/8) AUOUTL2 TO(3/8)
  • Page 62 RDR-HX1010 AV-089 BOARD(8/8) TO(2/8,3/8) SWA5V ADMUTE CONNECTOR ADMUTE XSWGBRST TO(2/8,3/8 AUGND XSWGBRST -REF.NO.:10,000 SERIES- 6/8,7/8) REC_MCK_1 REC_MCK_1 TO(2/8) ADLRCKI ADLRCKI AOUTL+ AOUTL+ ADBCKI ADBCKI AOUTL- AOUTL- ADDATI ADDATI AOUTR- CN502 B TO B CN501 B TO B AOUTR- JL502 JL561...
  • Page 63 RDR-HX1010 For Schematic Diagram • Refer to page 4-4 for waveforms. NO MARK:REC/PB MODE ER-036 BOARD R :REC MODE P :PB MODE VIDEO/AUDIO I/O INTERFACE -REF.NO.:50,000 SERIES- CN105 JL101 JL102 EURO_MUTE JL103 Q102 MSB709-RT1 JL104 R115 EUAUOUTL JL105 C123 AUGND...
  • Page 64 RDR-HX1010 ND1301 FLUORESCENT TUBE FL-144 BOARD INDICATOR DRIVE JL1316 C1312 SEG21 0.1u JL1317 -REF.NO.:40,000 SERIES- SEG20 JL1328 SEG19 JL1329 SEG18 C1308 NO MARK:REC/PB MODE C1307 0.01u JL1331 SEG17 JL1332 SEG16 JL1333 SEG15 JL1330 JL1334 CN1301 SEG14 JL1301 JL1335 IT_GND SEG13...
  • Page 65 RDR-HX1010 FR-232 BOARD LED DRIVE,FUNCTION KEY -REF.NO.:40,000 SERIES- R115 R109 2200 R114 4700 NO MARK:REC/PB MODE Q102 MSB709-RT1 PWR SW LEDIM Q101 DTC114EKA-T146 SWITCH D102 IC102 SLR-332VRT32 BU2050F-E2 IC102 TIMER REC R116 JL122 LED DRIVE JL136 JL125 CN101 17P JL137...
  • Page 66 RDR-HX1010 CN-243 BOARD RELAY -REF.NO.:30,000 SERIES- CN1801 CN1802 IDE_RST IDE_RST IDE_D7 IDE_D7 IDE_D8 IDE_D8 IDE_D6 IDE_D6 IDE_D9 IDE_D9 IDE_D5 IDE_D5 IDE_D10 IDE_D10 IDE_D4 IDE_D4 IDE_D11 IDE_D11 IDE_D3 IDE_D3 IDE_D12 IDE_D12 IDE_D2 IDE_D2 IDE_D13 IDE_D13 IDE_D1 IDE_D1 IDE_D14 IDE_D14 IDE_D0 IDE_D0...
  • Page 67 RDR-HX1010 For Schematic Diagram • Refer to page 4-65 for printed wiring board. SM_SDA SM_SDA SM_SCL SM_SCL MI-056 BOARD(1/4) XHDMIINT1 XHDMIINT1 PS101 IP CONV.,SDRAM XHDMIRST1 XHDMIRST1 UNSW6V XHDMICS -REF.NO.:50,000 SERIES- XHDMICS TO(4/4) SCIF2_SDI XX MARK:NO MOUNT SCIF2_SDI TO(2/4) C104 C108 SW3.3VB...
  • Page 68 RDR-HX1010 For Schematic Diagram • Refer to page 4-65 for printed wiring board. MI-056 BOARD(2/4) SIGNAL PATH NO MARK:REC/PB MODE HDMI TH R :REC MODE VIDEO SIGNAL P :PB MODE -REF.NO.:50,000 SERIES- XX MARK:NO MOUNT CHROMA Y/CHROMA SM_T_SCL SM_T_SDA R242...
  • Page 69 RDR-HX1010 For Schematic Diagram • Refer to page 4-65 for printed wiring board. CN302 MI-056 BOARD(3/4) SIGNAL PATH JL326 216MBit DAC,75Ω BUFFER Y_OUT VIDEO SIGNAL -REF.NO.:50,000 SERIES- JL327 C_OUT XX MARK:NO MOUNT CHROMA Y/CHROMA R354 JL328 VIDEO_OUT ER-036 BOARD NO MARK:REC/PB MODE...
  • Page 70 RDR-HX1010 For Schematic Diagram • Refer to page 4-65 for printed wiring board. • Refer to page 4-4 for waveforms. MI-056 BOARD(4/4) HDMI CONTROL -REF.NO.:50,000 SERIES- XX MARK:NO MOUNT SM_DDC_SCL NO MARK:REC/PB MODE SM_DDC_SDA XIPRST XTXRST SM_SDA SM_SCL XHDMIINT1 HDMI_DL...
  • Page 71 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. • Refer to page 4-4 for waveforms. RD-058 BOARD(1/13) I2C0_SCL I2C0_SDA IC101 M24C32-WMN6T(B) R178 R190 -REF.NO.:20,000 SERIES- 2200 2200 ADMUTE XX MARK:NO MOUNT ADMUTE TO(12/13) R162 R166...
  • Page 72 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. UNHA18 IC201 RD-058 BOARD(2/13) MBM29Z0003PCN-KE1 NAND-F,FLASH ROM,ICECN UNHD0 UNHD0 UNHA24 -REF.NO.:20,000 SERIES- UNHD1 UNHD1 UNHA17 XX MARK:NO MOUNT UNHD2 UNHD2 UNHA16 UNHD3 BYTE NO MARK:REC/PB MODE UNHD3...
  • Page 73 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. RD-058 BOARD(3/13) BUFFER NO MARK:REC/PB MODE -REF.NO.:20,000 SERIES- R :REC MODE P :PB MODE XX MARK:NO MOUNT UNHD0 XUNHDGT UNHD0 UNHD1 XSWHDGT0 UNHD1 UNHD2 UNHD2 TO(4/13) XSWGT0...
  • Page 74 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. XSHCS6 XSHCS6 RD-058 BOARD(4/13) XSHCS5 NO MARK:REC/PB MODE XSHCS5 R :REC MODE XSHCS4 XSHCS4 GRIPS(HOST GLUE) P :PB MODE XSHCS2 TO(1/13) XSHCS2 -REF.NO.:20,000 SERIES- XSHCS1 XSHCS1 XX MARK:NO MOUNT...
  • Page 75 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. TO(6/13) TO(7/13,10/13) TO(7/13) TO(10/13) RD-058 BOARD(5/13) CARIB,POWER -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT IC606 :Voltage measurement of the CSP IC and the Transistors with mark,is BUFFER not possible.
  • Page 76 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. RD-058 BOARD(6/13) :Voltage measurement of the CSP IC CARIB DDR and the Transistors with mark,is not possible. -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE R :REC MODE...
  • Page 77 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. RD-058 BOARD(7/13) Note:Resistors are mounted to NAZCA2 the location where C818 -REF.NO.:20,000 SERIES- and C822 are printed. XX MARK:NO MOUNT R880 R3851 100k :Voltage measurement of the CSP IC...
  • Page 78 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. RD-058 BOARD(8/13) NAZCA2 DDR DGND TO(7/13) SW2.5VA_DDR -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT :Voltage measurement of the CSP IC and the Transistors with mark,is not possible. CL901 DDRA_CK...
  • Page 79 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. • Refer to page 4-4 for waveforms. NO MARK:REC/PB MODE RD-058 BOARD(9/13) IC1001 -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT PLL2FSEL TO(1/13) IC1402 PLL1FSEL IC1001 BU2357FV-E2 ADAC R1015 C1003...
  • Page 80 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. RD-058 BOARD(10/13) NO MARK:REC/PB MODE VDEC -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT VID5V C1242 L1201 C1219 R1249 D1201 10uH R1240 C1218 0.01u 1SS355TE-17 0.01u Q1201 C1212 C1222 MSB709-RT1...
  • Page 81 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. • Refer to page 4-4 for waveforms. RD-058 BOARD(11/13) :Voltage measurement of the CSP IC NO MARK:REC/PB MODE and the Transistors with mark,is R :REC MODE P :PB MODE not possible.
  • Page 82 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. RD-058 BOARD(12/13) AV CONNECTOR, HDMI-IF -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT FL2101 UNSW6V DGND C2101 C2102 0.1u 0.1u CN1701 CN1702 R1714 JL1777 JL1732 JL1736 TO(5/13) SPDIF_AV SPDIF_AV _SW2.5V SW2.5V...
  • Page 83 RDR-HX1010 For Schematic Diagram • Refer to page 4-69 for printed wiring board. RD-058 BOARD(13/13) JTAG -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT JL1806 CARTDO JL1807 VDCTDO JL1808 TO(5/13) JTAGTCK JL1809 JTAGTMS JL1810 XCARRST2 JL1811 VDCTDO JL1813 TO(10/13) JTAGTCK JL1814 JTAGTMS JL1816...
  • Page 84 RDR-HX1010 SW12V SWITCHING REGULATOR Q301 UNSW12V REG C112 L104 680p L105 IC301 DETECT (SRV1794EK) D304 P301 Q301 T101 SW5V D301 11EQS06/10 1.25A L301 2SJ438 SF5LC20U 3.7uH Q302 R303 R102 R301 C301 Z102 2SJ525 SW12V 1000p DSP-501N 1/4W 1/4W 1/2W R307...
  • Page 85 RDR-HX1010 4-3. PRINTED WIRING BOARDS • : Uses unleaded solder. MI-056 BOARD(SIDE A) FL107 R120 CN101 R123 FL105 C184 C182 S401 C181 C180 C401 R451 R450 CL410 CL412 C157 R445 R459 R448 CL401 C158 CL413 R449 R460 R131 R461 R457...
  • Page 86 RDR-HX1010 • : Uses unleaded solder. MI-056 BOARD(SIDE B) R113 C104 RB102 RB101 FL102 R358 R357 R114 C108 C186 Q302 C101 Q301 FL103 C187 R356 R354 RB115 C105 C178 C179 R115 RB116 RB114 RB113 RB133 RB132 R122 R119 JL329 R199...
  • Page 87 RDR-HX1010 • : Uses unleaded solder. RD-058 BOARD (SIDE A) R3669 R3666 C657 R3670 R3671 R3667 R3668 CN2300 ZU003 ZU004 PG001 R1725 R1414 CN601 R1452 R1415 CN801 C656 CN602 C605 R1416 R1450 R1417 IC1402 HA002 R1451 R1419 C848 L1101 IC803...
  • Page 88 RDR-HX1010 • : Uses unleaded solder. RD-058 BOARD (SIDE B) R3853 R1745 R856 JL625 R3672 JL1775 JL1776 JL1733 C854 JL852 IC804 JL1779 CN1702 JL1728 JL1730 JL1734 JL1764 JL1772 JL1770 JL1780 R695 HB002 IC603 IC602 R3852 C1702 R1119 R1105 R1418 R1106...
  • Page 89 RDR-HX1010 SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. IT CONTROL IC (IC604: M306H3MC-058FPUO (AV-089 BOARD)) Pin No. Pin Name Function GRADE Fixed at “L” SIRCS Remote control signal input AV_LINK_IN AV LINK signal input FLD_DATA Output of FLD data signal FLD_IN Fixed at “L”...
  • Page 90 Pin No. Pin Name Function FLD_CS Output of FLD driver chip select signal LED_STB Output of stand-by signal AREA0 Fixed at “H” AREA1 Fixed at “H” IMUTE Not used FL_PCONT Output of FLD DC/DC converter power control signal TU_BST_C2 Not used EEP_WP EEPROM writing protect signal input EEP_SCL...
  • Page 91 Pin No. Pin Name Function IT_CON_TEMP Temperature control signal input BS_C/N_DET Fixed at “L” AVSS – Analog GND TU_G_MAX Tuner gain detect signal input VREF – Power supply input (5V) AVCC – Power supply input (5V) XL3MUTE Not used START Oscillation selection input SYNCIN Slice video input signal...

  • Page 92: Cpu (Ic104: Hd6417306Bl200Av (Rd-058 Board))

    5-2. CPU (IC104: HD6417306BL200AV (RD-058 BOARD)) Pin No. Pin Name Function EXTAL Crystal resonator (33MHz) RESET Reset VSS-CPG CPG GND Bus ready (To IC105) NF/PJ7 Not used (Pull-down) VSS-PLL2 PLL2 GND DCK/PJ 1 Divide Ckio 1/1,1/2,1/3 NF/PJ 4 Not used (Open) NF/PJ 5 Not used (Open) NF/PJ 2...
  • Page 93 Pin No. Pin Name Function Address (SHHA) Bus start NF/PE5 To IC107 Address (SHHA) NF/PE2 To EPG NF/PE3 To EPG Data (SHHD) NF/PE4 From EPG Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) VSSQ IO GND Data (SHHD)
  • Page 94 Pin No. Pin Name Function VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND Address (SHHA) Address (SHHA) VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND Address (SHHA) Address (SHHA) Address (SHHA) Address (SHHA) WE3/DQM3/ICIOWR D31-D24 select signal WE2/DQM2/ICIORD D23-D16 select signal VDD ( SH-SW1.5VA ) Chip select 3...
  • Page 95 Pin No. Pin Name Function IRL0 Interrupt 0 (To CARIB) IRL1 Interrupt 1 (To CARIB) VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND IRL2 Interrupt 2 (From NAZCA2) IRL3 Interrupt 3 (From GRIPS) VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND Not used (Open)
  • Page 96 Pin No. Pin Name Function DRAK0 Not used (Open) Not used (Pull-up) SCIF0-TXD/PG5 SCIF0 transmit data/Port SCIF0-RXD/PG6 SCIF0 recive data/Port Not used (Pull-down) Not used (Pull-down) SCIF0-CLK/PG7 SCIF0 clock/Port SCIF1-RTS/PG2 SCIF1 transmission request/Port H-UDI clock VSSQ IO VDD ( SH-SW3.3V ) SCIF2-RTS/PH5 SCIF2 transmission request /Port SCIF1-CTS/PG3...
  • Page 97 Pin No. Pin Name Function VDD-PLL1 PLL1 VDD VSS-PLL1 PLL1 GND NF/PJ6 Not used (Pull-up) VDD-CPG CPG VDD ( SH-SW3.3V ) VDD-PLL2 PLL2 VDD XTAL Crystal resonator (33MHz)
  • Page 98 MEMO 5-10E...

  • Page 99: Service Mode

    RDR-HX1010 SECTION 6 SERVICE MODE This is the diagnostics to define the faulty position. The diagnostics can be executed using the remote commander (Remote Control Mode 3) and monitor. To execute the service mode, connect the VIDEO OUT (L2 OUT) connector to the monitor.

  • Page 100: Screen Transition In The Service Mode

    9) HDD MODE • • <RETURN> • MODEL SYSCON Version [ MENU 2 T MENU 1 SONY ID [ <RETURN> HDD Serial ID [ PATH TEST menu << PATH TEST MENU >> 1) NAZCA 2) CARIB-NAZCA PB < > •...

  • Page 101: Service Mode Menu Items And Description

    MODEL When the key “9” is pressed down, the monitor display moves SYSCON Version [ to the hard disk check screen. SONY ID HDD Serial ID 6-4. Device Check Menu (1/2) << DEVICE TEST MENU 1/2 >>...

  • Page 102: Screen Transition In The Test Mode

    6-7. Screen Transition in the TEST Mode TEST MODE menu << TEST MODE MENU >> << Version No. >> 1) Version No. 2) Error History • < > 3) Command History • 4) NAND Factory Setup • 5) History Clear •...

  • Page 103: Hard Disk Check Menu

    6-8. Hard Disk Check Menu << HDD MODE >> When the key “1” is pressed down, the ID check will be 1) Indicate ID executed. 2) Performance Check When the key “2” is pressed down, performance check will be 3) Write ID executed.

  • Page 104: Adjustment

    RDR-HX1010 SECTION 7 ADJUSTMENT 7-1. Video System Adjustment 7-2. S-Video Output S-Y Check <Purpose> This check confirms that the S-video output. If it adjusted incorrectly, Preparing for Adjustment color will be to dark or too thin. 1. Equipments • Oscilloscope...

  • Page 105: S-Video Output S-C Level Check

    7-3. S-Video Output S-C Level Check 7-5. Component Video Output B-Y Check <Purpose> <Purpose> This check confirms that the S-video output S-C conforms to the This check confirms that the B-Y signal of the component video PAL standard. If it is adjusted incorrectly, color will be too dark or output is correct.

  • Page 106: Repair Parts List

    RDR-HX1010 SECTION 8 REPAIR PARTS LIST 8-1. EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark 0 or have some differences from the original one.

  • Page 107: Chassis Section

    8-1-2. CHASSIS SECTION supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied TU401 supplied supplied supplied supplied supplied supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-086-778-01 FOOT * 64 A-1129-278-A RD-58 (BS) S COMPL 3-077-331-01 +BV3 (3-CR) * 65 A-1129-167-A AV-089 (LS) COMPL...

  • Page 108: Electrical Parts List

    AV-089 8-2. ELECTRICAL PARTS LIST NOTE: When indicating parts by reference number, • Due to standardization, replacements in the • RESISTORS please include the board name. parts list may be different from the parts All resistors are in ohms. specified in the diagrams or the components METAL: metal-film resistor The components identified by mark 0 or used on the set.
  • Page 109 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C606 1-162-970-11 CERAMIC CHIP 0.01uF C726 1-164-677-11 CERAMIC CHIP 0.033uF C609 1-115-871-11 ELECT C727 1-162-970-11 CERAMIC CHIP 0.01uF C611 1-126-786-11 ELECT 47uF C729 1-162-970-11 CERAMIC CHIP 0.01uF C732 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 110 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks IC701 6-706-723-01 IC BH7623KS2 Q613 8-729-010-25 TRANSISTOR MSD601-RT1 IC1201 6-706-742-01 IC BD7800FP-E2 Q614 8-729-010-25 TRANSISTOR MSD601-RT1 Q615 8-729-010-25 TRANSISTOR MSD601-RT1 < COIL > Q616 8-729-421-22 TRANSISTOR UN2211 Q617 8-729-045-17 TRANSISTOR 2SB1561T100Q L101...
  • Page 111 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R223 1-216-841-11 METAL CHIP 1/10W R350 1-216-833-11 METAL CHIP 1/10W R224 1-218-887-11 METAL CHIP 0.5% 1/10W R351 1-216-821-11 METAL CHIP 1/10W R225 1-218-871-11 METAL CHIP 0.5% 1/10W R352 1-216-864-11 SHORT CHIP R354...
  • Page 112 AV-089 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R655 1-216-809-11 METAL CHIP 1/10W R1201 1-216-295-91 SHORT CHIP R656 1-216-833-11 METAL CHIP 1/10W R1202 1-218-894-11 METAL CHIP 0.5% 1/10W R657 1-216-833-11 METAL CHIP 1/10W R1203 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W...
  • Page 113 CN-243 ER-036 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks CN-243(SS) COMPL(NOT SUPPLIED) C150 1-126-204-11 ELECT CHIP 47uF C151 1-162-927-11 CERAMIC CHIP 100PF ****************************** C152 1-162-927-11 CERAMIC CHIP 100PF C153 1-162-927-11 CERAMIC CHIP 100PF < CONNNECTOR > C154 1-162-927-11 CERAMIC CHIP 100PF...
  • Page 114 ER-036 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D136 8-719-071-15 DIODE HZM6.8ZWA1TL < TRANSISTOR > D137 8-719-071-15 DIODE HZM6.8ZWA1TL D138 8-719-071-15 DIODE HZM6.8ZWA1TL Q102 8-729-010-05 TRANSISTOR MSB709-RT1 D139 8-719-071-15 DIODE HZM6.8ZWA1TL Q106 8-729-010-25 TRANSISTOR MSD601-RT1 D140 8-719-071-15 DIODE HZM6.8ZWA1TL Q107...
  • Page 115 ER-036 FL-144 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R185 1-216-815-11 METAL CHIP 1/10W < CONNECTOR > R186 1-216-845-11 METAL CHIP 100K 1/10W R187 1-216-864-11 SHORT CHIP CN1302 1-774-729-21 PIN, CONNECTOR (PC BOARD) 10P R188 1-216-808-11 METAL CHIP 1/10W R189...
  • Page 116 FR-232 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks A-1129-171-A FR-232 (BS) COPML JR073 1-216-295-91 SHORT CHIP JR074 1-216-295-91 SHORT CHIP ***************** JR075 1-216-295-91 SHORT CHIP JR077 1-216-295-91 SHORT CHIP < CAPACITOR > JR078 1-216-296-11 SHORT CHIP C102 1-107-726-91 CERAMIC CHIP 0.01uF...
  • Page 117 FR-232 MI-056 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks S119 1-771-410-21 SWITCH, TACTILE(RETURN) C202 1-125-777-11 CERAMIC CHIP 0.1uF S120 1-771-410-21 SWITCH, TACTILE(NEXT) C204 1-125-777-11 CERAMIC CHIP 0.1uF S121 1-771-410-21 SWITCH, TACTILE(OPEN/CLOSE) C205 1-125-777-11 CERAMIC CHIP 0.1uF C206 1-125-777-11 CERAMIC CHIP...
  • Page 118 MI-056 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CONNECTOR > R122 1-218-941-81 RES-CHIP 1/16W R124 1-218-937-11 RES-CHIP 1/16W CN101 1-818-857-51 CONNECTOR, FFC/FPC 40P R125 1-218-937-11 RES-CHIP 1/16W CN201 1-818-086-21 HDMI CONNECTOR R126 1-218-929-11 RES-CHIP 1/16W * CN401 1-691-591-11 PIN, CONNECTOR (1.5MM) (SMD)8P...
  • Page 119 MI-056 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R320 1-218-941-81 RES-CHIP 1/16W RB125 1-242-962-21 RES, NETWORK 82X4 (1005) R325 1-218-951-11 RES-CHIP 1/16W RB126 1-242-962-21 RES, NETWORK 82X4 (1005) R326 1-208-874-81 METAL CHIP 0.5% 1/16W RB127 1-242-962-21 RES, NETWORK 82X4 (1005)
  • Page 120 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C124 1-125-777-11 CERAMIC CHIP 0.1uF C336 1-107-826-11 CERAMIC CHIP 0.1uF C126 1-125-777-11 CERAMIC CHIP 0.1uF C337 1-107-826-11 CERAMIC CHIP 0.1uF C127 1-125-777-11 CERAMIC CHIP 0.1uF C338 1-107-826-11 CERAMIC CHIP 0.1uF C339 1-107-826-11 CERAMIC CHIP...
  • Page 121 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C655 1-125-777-11 CERAMIC CHIP 0.1uF C849 1-125-777-11 CERAMIC CHIP 0.1uF C656 1-125-777-11 CERAMIC CHIP 0.1uF C850 1-126-208-21 ELECT CHIP 47uF C657 1-125-777-11 CERAMIC CHIP 0.1uF C852 1-125-777-11 CERAMIC CHIP 0.1uF C853 1-125-777-11 CERAMIC CHIP...
  • Page 122 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C1241 1-126-205-11 ELECT CHIP 47uF 6.3V C1916 1-125-837-91 CERAMIC CHIP 6.3V C1242 1-126-208-21 ELECT CHIP 47uF C1917 1-164-388-91 CERAMIC CHIP 270PF C1244 1-164-943-81 CERAMIC CHIP 0.01uF C2101 1-125-777-11 CERAMIC CHIP 0.1uF C2102...
  • Page 123 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC > < COIL > IC101 6-704-573-01 IC M24C32-WMN6T(B) L1101 1-424-918-21 INDUCTOR 10uH L1201 1-412-951-11 INDUCTOR 10uH IC104 6-707-917-01 IC HD6417306BL200AV IC105 8-759-573-97 IC SN74LVC541APWR L1601 1-410-371-41 INDUCTOR 1.5uH IC106...
  • Page 124 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R302 1-218-990-81 SHORT CHIP R536 1-218-965-11 RES-CHIP 1/16W R304 1-218-938-11 RES-CHIP 1/16W R537 1-218-965-11 RES-CHIP 1/16W R306 1-218-935-11 RES-CHIP 1/16W R538 1-218-929-11 RES-CHIP 1/16W R541 1-218-965-11 RES-CHIP 1/16W R307 1-218-938-11 RES-CHIP...
  • Page 125 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R686 1-218-933-11 RES-CHIP 1/16W R1108 1-216-295-91 SHORT CHIP R687 1-218-933-11 RES-CHIP 1/16W R1119 1-216-864-11 SHORT CHIP R688 1-218-937-11 RES-CHIP 1/16W R1124 1-216-295-91 SHORT CHIP R1125 1-216-296-11 SHORT CHIP R689 1-218-937-11 RES-CHIP 1/16W...
  • Page 126 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1617 1-218-965-11 RES-CHIP 1/16W R1746 1-216-864-11 SHORT CHIP R1618 1-218-965-11 RES-CHIP 1/16W R1749 1-218-949-11 RES-CHIP 1/16W R1619 1-218-965-11 RES-CHIP 1/16W R1810 1-218-957-11 RES-CHIP 2.2K 1/16W R1820 1-218-957-11 RES-CHIP 2.2K 1/16W R1620...
  • Page 127 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R3057 1-218-965-11 RES-CHIP 1/16W R3132 1-218-937-11 RES-CHIP 1/16W R3058 1-218-937-11 RES-CHIP 1/16W R3133 1-218-937-11 RES-CHIP 1/16W R3059 1-218-961-11 RES-CHIP 4.7K 1/16W R3134 1-216-864-11 SHORT CHIP R3141 1-218-935-11 RES-CHIP 1/16W R3061 1-218-938-11 RES-CHIP...
  • Page 128 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R3831 1-218-935-11 RES-CHIP 1/16W RB310 1-234-378-21 RES, NETWORK 10K (1005X4) R3832 1-218-937-11 RES-CHIP 1/16W RB311 1-234-714-11 RES, NETWORK 56 (1005X4) R3833 1-218-937-11 RES-CHIP 1/16W RB312 1-234-702-11 RES, NETWORK 68 (1005X4) RB313 1-234-714-11 RES, NETWORK 56...
  • Page 129 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks RB619 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB820 1-242-963-21 RES, NETWORK 33 (1005X4) RB620 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB821 1-242-963-21 RES, NETWORK 33 (1005X4) RB621 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB822 1-234-371-21 RES, NETWORK 47 (1005X4)
  • Page 130 POWER BLOCK Ref. No. Part No. Description Remarks 1-468-930-11 POWER BLOCK (SRV1194EK) ************************ < CAPACITOR > 0 C101 METALLIZED 0.1uF 250V 0 C103 CERAMIC 100pF 0 C104 CERAMIC 100pF 0 C112 CERAMIC 680pF 0 C114 CERAMIC 680pF < CONNECTOR > 0 CN101 AC INLET <...
  • Page 131 RDR-HX1010 Sony Corporation 2005H1600-1 Home Electronics Network Company 9-874-888-11 ©2005.8 — 179 — Published by Quality Assurance Dept.

Table of Contents