Counters; Soft Counter - Canon imageRUNNER 7095 Service Manual

Hide thumbs Also See for imageRUNNER 7095:

Table of Contents

10.2 Counters

The machine is equipped with soft counters to count the number of prints made, and the counter readings

may be indicated by pressing the Check key on the control panel.

The counter is controlled by the main controller PCB, and increases the count each time a copy/print is

made (as identified by the following sensors):

Copying/printing operation

The machine's counting mechanism consists of 8 modes, 2 each according to paper size (small-size, large-

size; a total of 16 modes):

Copying/printing operation

remote copy print

fax reception print*2

report print

duplexing print

*1: At time of shipment, B4 or smaller. To count B4 as a large-size sheet, use service mode.

*2: The machine does not have a fax function, and will not count fax reception prints.

The following table describes the counters according to model:

- 208/230V Non-European Model

Source of input

finisher delivery sensor

total (A through L)

Default indication

total (A through L)

total large (ACEGIK)

copy 1 (ABGH)

copy 1 large (AG)

finisher delivery sensor

Small-size*1

Default switchover*2

switchover*2

Table of Contents

Imagerunner 7105 Imagerunner 7086