hit counter script
Sony HCD-X10 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-X10
  6. Service manual

Sony HCD-X10 Service Manual

Super audio cd/ dvd receiver
Hide thumbs Also See for HCD-X10:
Table of Contents

Advertisement

Quick Links

QQ
3 7 63 1515 0

SERVICE MANUAL

Ver. 1.0 2007.06
• HCD-X10 is the amplifier, super audio CD/DVD
system, tuner and video section in DAV-X10.
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is
TE
prohibited.
L 13942296513
This system incorporates with Dolby* Digital
and Dolby Pro Logic (II) adaptive matrix
surround decoder and the DTS** Digital
Surround System.
This system perfectly decodes 5.1 channel
signal, but you cannot add other commercially
available surround speakers.
* Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic", and the double-D
symbol are trademarks of Dolby
Laboratories.
** Manufactured under license from DTS, Inc.
"DTS" and "DTS Digital Surround" are
registered trademarks of DTS, Inc.
www
.
Sony Corporation
9-887-725-01
Home Audio Division
2007F05-1
Published by Sony Techno Create Corporation
© 2007.06
http://www.xiaoyu163.com
Amplifier section (US and Canadian models)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
(FTC Output Power)
for the US model
Front/Front surround:
Subwoofer:
Power output(rated)
for the Canadian model
Front/Front surround*:
Subwoofer:
RMS output power (reference)
Front/Front surround*:
Subwoofer:
* Depending on the sound field settings and the source, there
may be no sound output.
Inputs (Analog)
TV, SAT/CABLE, VIDEO
Impedance: 50 kilohms
Inputs (Digital/COAXIAL)
SAT/CABLE , VIDEO
x
ao
u163
y
i
http://www.xiaoyu163.com
HCD-X10
2 9
8
Model Name Using Similar Mechanism
DVD Mechanism Type
Optical Pick-Up Block Name

SPECIFICATIONS

Q Q
3
6 7
1 3
1 5
With 4 ohms loads, both channels
driven, from 150 - 20,000 Hz;
rated 38 watts per channel
minimum
RMS power, with no more than 0.7
% total harmonic distortion from
250 milli watts to rated output.
With 4 ohms loads, both channels
driven, from 25 - 150 Hz; rated 38
watts per channel minimum RMS
power, with no more than 0.7 %
total harmonic distortion from 250
milli watts to rated output.
70 W + 70 W
(at 4 ohms, 1 kHz, 1 % THD)
70 W + 70 W
(at 4 ohms, 100 Hz, 1 % THD)
80 W + 80 W
(at 4 ohms, 1 kHz, 10 % THD)
80 W + 80 W
(at 4 ohms, 100 Hz, 10 % THD)
Sensitivity: 450 mV (ATT ON),
250 mV (ATT OFF)
Impedance: 75 ohms
SUPER AUDIO CD/DVD RECEIVER
co
.
9 4
2 8
US Model
Canadian Model
AEP Model
UK Model
HCD-X1
CDM85-DVBU102
KHM-310CAA or KHM-313CAA
0 5
8
2 9
9 4
2 8
Amplifier section (AEP and UK models)
Power output (rated)
Front/Front surround*:
70 W + 70 W
(at 4 ohms, 1 kHz, 1 % THD)
Subwoofer:
70 W + 70 W
(at 4 ohms, 100 Hz, 1 % THD)
RMS output power (reference)
Front/Front surround*:
80 W + 80 W
(at 4 ohms, 1 kHz, 10 % THD)
Subwoofer:
80 W + 80 W
(at 4 ohms, 100 Hz, 10 % THD)
* Depending on the sound field settings and the source, there
may be no sound output.
Inputs (Analog)
TV (EURO AV SCART), SAT/CABLE
Sensitivity: 450 mV (ATT ON),
250 mV (ATT OFF)
Impedance: 50 kilohms
Inputs (Digital/COAXIAL)
SAT/CABLE Impedance:
75 ohms
Video section (US and Canadian models)
Outputs
VIDEO: 1 Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
HDMI OUT: Type A (19 pin)
Inputs
VIDEO: 1 Vp-p 75 ohms
Video section (AEP and UK models)
Outputs
VIDEO: 1 Vp-p 75 ohms
RGB: 0.7 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
– Continued on next page –
m
9 9
9 9

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-X10

Summary of Contents for Sony HCD-X10

  • Page 1: Service Manual

    US Model Canadian Model AEP Model UK Model Ver. 1.0 2007.06 • HCD-X10 is the amplifier, super audio CD/DVD system, tuner and video section in DAV-X10. This product incorporates copyright protection Model Name Using Similar Mechanism HCD-X1 technology that is protected by U.S. patents and...
  • Page 2 PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE Fig. A. Using an AC voltmeter to check AC leakage. FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 3 [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate.

  • Page 4: Table Of Contents

    HCD-X10 3 7 63 1515 0 TABLE OF CONTENTS 6-30. Schematic Diagram – AV-002 Board (2/2) (AEP and UK models) – ..........55 6-31. Printed Wiring Board – MIC-002 Board SERVICING NOTES ..........5 (AEP and UK models) – ..........56 6-32.

  • Page 5: Servicing Notes

    HCD-X10 SECTION 1 SERVICING NOTES 3 7 63 1515 0 NOTE OF REPLACING THE EEPROM (IC1104 and NOTES ON HANDLING THE OPTICAL PICK-UP IC1703) ON THE MAIN BOARD BLOCK OR BASE UNIT EEPROM (IC1104 and IC1703) on the MAIN board cannot The laser diode in the optical pick-up block may suffer electrostatic exchange with single.

  • Page 6: About This Manual

    HCD-X10 3 7 63 1515 0 CD-RW/CD-R Music discs encoded with About This Manual (audio data) copyright protection (MP3 files) technologies (JPEG files) • The instructions in this manual describe the controls on the remote. You can also use the...
  • Page 7 HCD-X10 3 7 63 1515 0 NOTE OF REPLACING THE WIRE (FLAT TYPE) (11 CORE) (CN507 ON THE MAIN BOARD – CN801 ON THE DISPLAY BOARD) Two types exist in the MAIN board mounted in this set. The WIRE (FLAT TYPE) (11 CORE) connected between the CN507 on the MAIN board and the CN801 on the DISPLAY board is different according to the type.
  • Page 8 HCD-X10 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF – Bottom view – flat head screw driver 3 Open the tray. MAIN BOARD SERVICE POSITION •...

  • Page 9: General

    HCD-X10 SECTION 2 This section is extracted from instruction manual. GENERAL 3 7 63 1515 0 Front panel FUNCTION VOLUME A "/1 (on/standby) Soft-touch buttons B Disc tray E Z (open/close) C Front Panel Display F N (play) G x (stop) (remote sensor) H ./>...
  • Page 10 HCD-X10 3 7 63 1515 0 Front panel display About the indications in the front panel display SLEEP NIGHT TUNED TITLE CHAP STEREO MONO MOVIE MUSIC NTSC SA-CD REPEAT 1 DIGITAL PROGRESSIVE A Lights up when the sleep timer is set.

  • Page 11: Disassembly

    HCD-X10 SECTION 3 DISASSEMBLY 3 7 63 1515 0 • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. PANEL (BOWL) ASSY (Page 11) 3-4. TOP BLOCK 3-3. OPTICAL PICK-UP BLOCK (Page 13) (KHM-310CAA or KHM-313CAA) (Page 12) 3-5.

  • Page 12: Optical Pick-Up Block (Khm-310Caa Or Khm-313Caa)

    HCD-X10 3 7 63 1515 0 3-3. OPTICAL PICK-UP BLOCK (KHM-310CAA or KHM-313CAA) Note: The cover (bottom) on the bottom of the set can be removed when replacing the optical pick-up block KHM-310CAA or KHM-313CAA. 1 two screws (BVTP3 × 6)

  • Page 13: Top Block

    HCD-X10 3 7 63 1515 0 3-4. TOP BLOCK 2 three screws (BVTP3 × 8) 2 three screws (BVTP3 × 8) 3 top block L 13942296513 1 wire (flat type) (15 core) (CN101) – Bottom view – 3-5. TOP PANEL 1 ten screws (BVTP3 ×...

  • Page 14: Main Board

    HCD-X10 3 7 63 1515 0 3-6. MAIN BOARD PRECAUTION WHEN REMOVING WIRE (FLAT TYPE) (24 CORE) 1 Perform work with this wire (flat type) (24 core) connected, or make a bridge as mentioned above and then disconnect the wire (flat type) (24 core).

  • Page 15: D In-001 Board, D In-002 Board

    HCD-X10 3 7 63 1515 0 3-7. D IN-001 BOARD, D IN-002 BOARD 1 connector 3 D IN-001 board: US, Canadian model/ (CN2001: US, Canadian model/) D IN-002 board: AEP, UK model CH2001: AEP, UK model) 2 four screws (BVTP3 ×...

  • Page 16: Dvd Mechanism Deck (Cdm85-Dvbu102)

    HCD-X10 3 7 63 1515 0 3-9. DVD MECHANISM DECK (CDM85-DVBU102) 1 two rivets 3 cover (CDM) 2 two claws 5 bracket (main) 6 three screws (BVTP3 × 8) 4 screw (BVTP3 × 6) L 13942296513 7 DVD mechanism deck...

  • Page 17: Loading Assy

    HCD-X10 3 7 63 1515 0 3-10. LOADING ASSY 7 loading assy 1 two claws 5 two insulators 5 two insulators 4 two insulator screws 4 two insulator screws 6 optical pick-up block (KHM-310CAA or 313CAA) 2 FFC holder...

  • Page 18: Test Mode

    HCD-X10 SECTION 4 TEST MODE 3 7 63 1515 0 1. TEST MODES OTHER THAN THE TEST MENU 2. TEST MODES IN THE TEST MENU These are executable test mode even if not entering the test menu. These are the test modes done in the test menu.
  • Page 19 HCD-X10 3 7 63 1515 0 2-3. Cold Reset 10. To release from this mode, press the I/1 button. The cold reset clears data except DVD data stored in the RAM to AV-001 board J400 initial conditions. Execute this mode when returning the set to the (US, Canadian models) customers.
  • Page 20 HCD-X10 3 7 63 1515 0 3. DVD SERVICE MODE Manual Adjust 3-1. DVD Service Mode General Description 1. Track Balance Adjust: 2. Track Gain Adjust: This mode let you make diagnosis and adjustment easily by using 3. Focus Balance Adjust: the remote commander and the TV screen.
  • Page 21 HCD-X10 3 7 63 1515 0 To Clear the Laser Hour 2. You can check the total time when the laser is turned on during Press the [ DISPLAY] button on the remote commander and then playback of DVD and CD from the above menu. The maximum press the [CLEAR] button on the remote commander.
  • Page 22 HCD-X10 3 7 63 1515 0 5. CHECKING VERSION INFORMATION To check the version information, please follow the following procedure. Procedure: 1. From the top menu of Remocon Diagnosis Menu, select “4. Version Information” by pressing the [4] button on the remote commander.

  • Page 23: Electrical Adjustments

    HCD-X10 SECTION 5 ELECTRICAL ADJUSTMENTS 3 7 63 1515 0 DVD SECTION TUNER SECTION When the base unit is replaced, perform the adjustment and the FM TUNE LEVEL CHECK measurement as shown below in this order. signal EXECUTING IOP MEASUREMENT (See page 20)
  • Page 24 HCD-X10 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...

  • Page 25: Diagrams

    HCD-X10 SECTION 6 3 7 6 3 1 5 1 5 0 DIAGRAMS 6-1. BLOCK DIAGRAM – DVD SERVO Section – SPDIF SPDIF 225 DIGITAL AUDIO BUS ASDATA0 (Page 28) DVDRFIP ASDATA0 217 VOA/A ASDATA1 218 VOB/B HDMI BUS...

  • Page 26: Block Diagram - Panel, Hdmi, Dmport Section

    HCD-X10 3 7 6 3 1 5 1 5 0 6-2. BLOCK DIAGRAM – PANEL, HDMI, DMPORT Section – FLUORESCENT INDICATOR TUBE DRIVER • R-ch is omitted due to same as L-ch. IC821 • SIGNAL PATH C822, R828 : AUDIO...

  • Page 27: Block Diagram - Audio Input Section

    HCD-X10 3 7 6 3 1 5 1 5 0 6-3. BLOCK DIAGRAM – AUDIO INPUT Section – AUDIO SELECTOR IC441 LINE AMP DMPORT1_L ADAC_L IC401 (Page 28) DMPORT2_L 15 X2 MUTING (Page 26) Q407 (US, Canadian) AUDIO SELECTOR...

  • Page 28: Block Diagram - Dsp Section

    HCD-X10 3 7 6 3 1 5 1 5 0 6-4. BLOCK DIAGRAM – DSP Section – A/D CONVERTER IC772 • R-ch is omitted due to same as L-ch. ADAC_L 13 VinL • SIGNAL PATH DOUT (Page 27) : AUDIO...

  • Page 29: Block Diagram - Amp Section

    HCD-X10 3 7 6 3 1 5 1 5 0 6-5. BLOCK DIAGRAM – AMP Section – • SIGNAL PATH : AUDIO CN3005 SPEAKER STREAM PROCESSOR DIGITAL POWER AMP IMPEDANCE IC3006 IC3011 USE 4Ω AMP BUS DATA OUTL1 6 PWM_A OUT_A 28 –...

  • Page 30: Block Diagram - Video Section

    HCD-X10 3 7 6 3 1 5 1 5 0 6-6. BLOCK DIAGRAM – VIDEO Section – (US, Canadian) (AEP, UK) J401 (2/3) VIDEO CN400 J400 (2/3) VIDEO IN T EURO SAT/CABLE AV OUTPUT Ω DRIVER VIDEO IN VIDEO...

  • Page 31: Block Diagram - Power Supply Section

    HCD-X10 3 7 6 3 1 5 1 5 0 6-7. BLOCK DIAGRAM – POWER SUPPLY Section – T900 SUB POWER TRANSFORMER RECT SW +8V REGULATOR D908 IC903 RECT E +6V D912 VIDEO +5V REGULATOR IC402 (US, Canadian) VIDEO +5V...
  • Page 32 HCD-X10 3 7 6 3 1 5 1 5 0 • Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location Note on Printed Wiring Board: Note on Schematic Diagram: MIC-002 board (AEP, UK) • X : parts extracted from the component side.

  • Page 33: Schematic Diagram - Main Section (1/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. • See page 82 for IC Pin Function Description. 6-8. SCHEMATIC DIAGRAM – MAIN Section (1/11) –...

  • Page 34: Schematic Diagram - Main Section (2/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-9. SCHEMATIC DIAGRAM – MAIN Section (2/11) – MAIN BOARD (2/11) CN514 R579 P_CONT4 P_CONT4 DC_DETECT RB601 DC-DETECT OVF2 E+4V OVF2...

  • Page 35: Schematic Diagram - Main Section (3/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-10. SCHEMATIC DIAGRAM – MAIN Section (3/11) – (Page 33) MAIN BOARD (3/11) MAIN BOARD (1/11) (Page 36) D-GND (AEP,UK) CN503 SW+3.3V...

  • Page 36: Schematic Diagram - Main Section (4/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. 6-11. SCHEMATIC DIAGRAM – MAIN Section (4/11) – MAIN BOARD (4/11) R754 ASDATA0 R753 ABCK...

  • Page 37: Schematic Diagram - Main Section (5/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. • See page 82 for IC Pin Function Description. 6-12. SCHEMATIC DIAGRAM – MAIN Section (5/11) –...

  • Page 38: Schematic Diagram - Main Section (6/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-13. SCHEMATIC DIAGRAM – MAIN Section (6/11) – MAIN BOARD (6/11) C475 CN409 DMPORT1 VGND (TYPE-11) (TYPE-12) R469 VIDEO C476 WM_TXD...

  • Page 39: Schematic Diagram - Main Section (7/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 82 for IC Pin Function Description. 6-14. SCHEMATIC DIAGRAM – MAIN Section (7/11) – (Page 36) (Page 42) (Page 42)

  • Page 40: Schematic Diagram - Main Section (8/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-15. SCHEMATIC DIAGRAM – MAIN Section (8/11) – MAIN BOARD (8/11) RF+3.3V FB1101 REG01 MAIN BOARD REG02 (9/11) (4.9) (3.3) (TYPE-11)

  • Page 41: Schematic Diagram - Main Section (9/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 6-16. SCHEMATIC DIAGRAM – MAIN Section (9/11) – MAIN BOARD (9/11) R1321 100k R1322 100k R1334 IOPMON R1331 FCS- FCS- R1327 FCS+ FCS+ VREFO TRK+ C1315 MAIN C1308 R1318...

  • Page 42: Schematic Diagram - Main Section (10/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. • See page 82 for IC Pin Function Description. 6-17. SCHEMATIC DIAGRAM – MAIN Section (10/11) – R1786 MAIN BOARD (10/11) SW+3.3V...

  • Page 43: Schematic Diagram - Main Section (11/11)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. • See page 82 for IC Pin Function Description. 6-18. SCHEMATIC DIAGRAM – MAIN Section (11/11) –...

  • Page 44: Printed Wiring Board - Main Section (1/2) (Type-11)

    HCD-X10 • See page 32 for Circuit Boards Location. 6-19. PRINTED WIRING BOARD – MAIN Section (1/2) (TYPE-11) – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 MAIN BOARD (COMPONENT SIDE) IC1104 C1311 R1331...

  • Page 45: Printed Wiring Boards - Main Section (2/2) (Type-11)

    HCD-X10 • See page 32 for Circuit Boards Location. 6-20. PRINTED WIRING BOARDS – MAIN Section (2/2) (TYPE-11) – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 OPTICAL PICK-UP BLOCK (KHM-310CAA or KHM-313CAA) (2/2)

  • Page 46: Printed Wiring Board - Main Section (1/2) (Type-12)

    HCD-X10 • See page 32 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 6-21. PRINTED WIRING BOARD – MAIN Section (1/2) (TYPE-12) – : Uses unleaded solder. MAIN BOARD (COMPONENT SIDE) IC1104 C1311 R1331...

  • Page 47: Printed Wiring Boards - Main Section (2/2) (Type-12)

    HCD-X10 • See page 32 for Circuit Boards Location. 6-22. PRINTED WIRING BOARDS – MAIN Section (2/2) (TYPE-12) – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 OPTICAL PICK-UP BLOCK (KHM-310CAA or KHM-313CAA) (2/2)

  • Page 48: Printed Wiring Board - Av-001 Board (Component Side) (Us And Canadian Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. 6-23. PRINTED WIRING BOARD – AV-001 Board (Component Side) (US and Canadian models) – : Uses unleaded solder. • Semiconductor Location Ref.

  • Page 49: Printed Wiring Board - Av-001 Board (Conductor Side) (Us And Canadian Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. 6-24. PRINTED WIRING BOARD – AV-001 Board (Conductor Side) (US and Canadian models) – : Uses unleaded solder. • Semiconductor J400...

  • Page 50: Schematic Diagram - Av-001 Board (1/2) (Us And Canadian Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. 6-25. SCHEMATIC DIAGRAM – AV-001 Board (1/2) (US and Canadian models) – AV-001 BOARD (1/2)

  • Page 51: Schematic Diagram - Av-001 Board (2/2) (Us And Canadian Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-26. SCHEMATIC DIAGRAM – AV-001 Board (2/2) (US and Canadian models) – AV-001 BOARD (2/2) R320 3.3k R344 C328 4.7k R317 C325 2.2k...

  • Page 52: Printed Wiring Board - Av-002 Board (Component Side) (Aep And Uk Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. 6-27. PRINTED WIRING BOARD – AV-002 Board (Component Side) (AEP and UK models) – : Uses unleaded solder. • Semiconductor Location Ref.

  • Page 53: Printed Wiring Board - Av-002 Board (Conductor Side) (Aep And Uk Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. 6-28. PRINTED WIRING BOARD – AV-002 Board (Conductor Side) (AEP and UK models) – : Uses unleaded solder. • Semiconductor J400...

  • Page 54: (Aep And Uk Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-29. SCHEMATIC DIAGRAM – AV-002 Board (1/2) (AEP and UK models) – IC B/D IC401 AV-002 BOARD (1/2) BH7868FS-E2 L401 10uH...

  • Page 55: Schematic Diagram - Av-002 Board (2/2) (Aep And Uk Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-30. SCHEMATIC DIAGRAM – AV-002 Board (2/2) (AEP and UK models) – AV-002 BOARD (2/2) C327 C326 0.01 CN301 IC B/D...

  • Page 56: Printed Wiring Board - Mic-002 Board (Aep And Uk Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 6-32. SCHEMATIC DIAGRAM – MIC-002 Board (AEP and UK models) – 6-31. PRINTED WIRING BOARD – MIC-002 Board (AEP and UK models) – • See page 32 for Circuit Boards Location.

  • Page 57: Printed Wiring Board - P-Sw Board

    HCD-X10 3 7 6 3 1 5 1 5 0 6-34. SCHEMATIC DIAGRAM – P-SW Board – 6-33. PRINTED WIRING BOARD – P-SW Board – • See page 32 for Circuit Boards Location. : Uses unleaded solder. P-SW BOARD...

  • Page 58: Printed Wiring Board - D In-001 Board (Us And Canadian Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 6-35. PRINTED WIRING BOARD – D IN-001 Board (US and Canadian models) – • See page 32 for Circuit Boards Location. : Uses unleaded solder. D IN-001 BOARD (COMPONENT SIDE)

  • Page 59: Schematic Diagram - D In-001 Board (Us And Canadian Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-36. SCHEMATIC DIAGRAM – D IN-001 Board (US and Canadian models) – D IN-001 BOARD J2001 VIDEO COAXIAL C2004 C2002 C2001...

  • Page 60: Printed Wiring Board - D In-002 Board (Aep And Uk Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. 6-37. PRINTED WIRING BOARD – D IN-002 Board (AEP and UK models) – : Uses unleaded solder. D IN-002 BOARD D IN-002 BOARD...

  • Page 61: Schematic Diagram - D In-002 Board (Aep And Uk Models)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-38. SCHEMATIC DIAGRAM – D IN-002 Board (AEP and UK models) – D IN-002 BOARD J2002 C2001 COAXIAL R2003 R2001 C2003...

  • Page 62: Printed Wiring Board - Display Board

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. 6-39. PRINTED WIRING BOARD – DISPLAY Board – : Uses unleaded solder. DISPLAY BOARD (COMPONENT SIDE) R805 CN801 Q801 D802 R803...

  • Page 63: Schematic Diagram - Display Board

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. 6-40. SCHEMATIC DIAGRAM – DISPLAY Board – DISPLAY BOARD FL801 FLUORESCENT INDICATOR TUBE 10 11 12...

  • Page 64: Printed Wiring Board - P-Amp Board (Component Side)

    HCD-X10 • See page 32 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 6-41. PRINTED WIRING BOARD – P-AMP Board (Component Side) – : Uses unleaded solder. (TYPE-11) (TYPE-12) MAIN BOARD MAIN BOARD (Page 45)

  • Page 65: P-Amp Board (Conductor Side)

    HCD-X10 • See page 32 for Circuit Boards Location. 6-42. PRINTED WIRING BOARD – P-AMP Board (Conductor Side) – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 (Page 47) (Page 45) MAIN BOARD MAIN BOARD...

  • Page 66: Schematic Diagram - P-Amp Board (1/5)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. 6-43. SCHEMATIC DIAGRAM – P-AMP Board (1/5) – P-AMP BOARD (1/5) C3031 C3034 R3044 C3044...

  • Page 67: Schematic Diagram - P-Amp Board (2/5)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-44. SCHEMATIC DIAGRAM – P-AMP Board (2/5) – (2/5) P-AMP BOARD IC3007 IC B/D CN3003 IC3007 DIGITAL POER AMP CXD9883M C3071 26.7...

  • Page 68: Schematic Diagram - P-Amp Board (3/5)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 71 for Waveforms. • See page 74 for IC Block Diagrams. 6-45. SCHEMATIC DIAGRAM – P-AMP Board (3/5) – (3/5) P-AMP BOARD XFSOIN SOFT_MUTE SCDT SHIFT...

  • Page 69: Schematic Diagram - P-Amp Board (4/5)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-46. SCHEMATIC DIAGRAM – P-AMP Board (4/5) – P-AMP BOARD (4/5) IC B/D IC3010 IC3010 CXD9883M DIGITAL POWER AMP C3057 26.7 31.2...

  • Page 70: Schematic Diagram - P-Amp Board (5/5)

    HCD-X10 3 7 6 3 1 5 1 5 0 • See page 74 for IC Block Diagrams. 6-47. SCHEMATIC DIAGRAM – P-AMP Board (5/5) – P-AMP BOARD (5/5) TH900 T901 C937 220 125V(US,CND) LIVE MAIN POWER 680p 125V(AEP,UK)
  • Page 71 HCD-X10 3 7 63 1515 0 • Waveforms – MAIN Board – IC1105 <z.v (YUV1) IC1105 <xzc (ALRCK) IC702 qd (CKOUT(O)) (Color bar) 1 Vp-p 4.6 Vp-p 3.7 Vp-p 20.8 µ s 81.4 ns 500 mV/DIV, 20 µ s/DIV 1 V/DIV, 10 µ...
  • Page 72 HCD-X10 3 7 63 1515 0 – AV-001 Board – – DISPLAY Board – IC1 <zvc (XTAL) IC401 qj, qk (CrOUT) T801 2 (Color bar) 1.6 Vp-p 1.7 Vp-p 16.4 Vp-p 7 µ s 40 ns 500 mV/DIV, 20 µ s/DIV 10 V/DIV, 5 µ...
  • Page 73 HCD-X10 3 7 63 1515 0 – P-AMP Board – IC3006 qf (XFSOOUT) 3 Vp-p 20.6 ns 1 V/DIV, 10 ns/DIV IC3005 qf (XFSOOUT) 3 Vp-p 20.6 ns 1 V/DIV, 10 ns/DIV L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 74 HCD-X10 3 7 63 1515 0 • IC Block Diagrams – MAIN Board – IC4 SN74LVC1G79DCKR IC5, 9, 601 – 603 SI-3010KM-TL IC412 SN74LV125APWR 14 VCC 1 OE 4 OE L 13942296513 – 2 OE VOUT 3 OE IC441 MC14052 BDR2...
  • Page 75 HCD-X10 3 7 63 1515 0 IC503 PST3635NR IC504, 1706 TK11150CSCL-G IC502, 1101, 1102, 1707 TK11133CSCL-G IC1705 TK11118CSCL-G OUT 1 VDD 2 – OVER HEAT & OVER CURRENT PROTECTION VREF CONTROL – CIRCUIT GND 3 BANDGAP REFERENCE IC702 LC890561W...
  • Page 76 HCD-X10 3 7 63 1515 0 IC772 PCM1808PWR ANTIALIAS VINR LOW-PASS FILTER ANTIALIAS VINL LOW-PASS FILTER DELTA-SIGMA × 1/64 MODULATOR SERIAL DECIMATION INTERFACE FILTER VREF 1 REFERENCE & WITH MODE/FORMAT DOUT HIGH-PASS CONTROL DELTA-SIGMA FILTER MODULATOR AGND POWER SUPPLY DGND CLOCK &...
  • Page 77 HCD-X10 3 7 63 1515 0 IC402 NJM2887DL3 (TE2) THERMAL PROTECTION BANDGAP REFERENCE – – AV-002 Board – IC301 MC14052 BDR2 IC400 NJM2235V(TE2) VIN 1 BUFFER V OUT SW 1 VIN 2 2-COM 1-COM BIAS SW 2 VIN 3...
  • Page 78 HCD-X10 3 7 63 1515 0 – D IN-001 Board – – D IN-002 Board – IC2002 TC74HC151AF (EL) IC2002 TC74HC151AF (EL) – DISPLAY Board – IC821 ML9208-03MBZ03B 64 VDD 63 DA 8 BIT SHIFT 62 CP REGISTER 61 CS...
  • Page 79 HCD-X10 3 7 63 1515 0 – P-AMP Board – IC900 STR-V153 UVLO INTERNAL − DELAY LATCH − BIAS OFF TIMER DRIVE POWER PRC LATCH MOS FET − − BLANKING BURST − DISCHARGE – − BUFFER 1 2 3...
  • Page 80 HCD-X10 3 7 63 1515 0 IC3002 TK11118CSCL-G IC3015 TK11133CSCL-G OVER HEAT & OVER CURRENT PROTECTION CONTROL – CIRCUIT BANDGAP REFERENCE IC3004 – 3006 CXD9876R L 13942296513 CLOCK CLOCK GENERATOR GENERATOR 36 XFSIIN (SECONDARY) (PRIMARY) XVSS 35 DVDD VSUBC...
  • Page 81 HCD-X10 3 7 63 1515 0 IC3007 – 3012 CXD9883M BST_A PVDD_A Over Current Fault GVDD_A PVDD_A PVDD_A /OTW VREG Gate Drive /HIZ_HS_A PGND /HIZ_LS_A Stuck Detect /RESET PGND Protection Logic Timing PWM_A PGND Control /OCH_A Programmable OC_ADJ OUT_A...
  • Page 82 HCD-X10 3 7 63 1515 0 • IC Pin Function Description MAIN BOARD IC1 ADSST-AVR-1115 (DSP) Pin No. Pin Name Description VDDINT Power supply terminal (+1.2V) (for core) Core instruction rate to CLKIN (pin 142) ratio selection signal input terminal CLKCFG0 Fixed at "L"...
  • Page 83 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description 56, 57 A17, A18 Not used Ground terminal VDDEXT Power supply terminal (+3.3V) (for I/0) VDDINT Power supply terminal (+1.2V) (for core) Ground terminal PF_CE Not used SPI_MAS...
  • Page 84 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description Ground terminal VDDINT Power supply terminal (+1.2V) (for core) Ground terminal VDDINT Power supply terminal (+1.2V) (for core) Ground terminal VDDINT Power supply terminal (+1.2V) (for core) Ground terminal VDDEXT Power supply terminal (+3.3V) (for I/0)
  • Page 85 HCD-X10 3 7 63 1515 0 MAIN BOARD IC501 M30626MJP-A13FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP_SCDT/ Serial data output to the digital audio interface receiver and stream processor DIR_DIN DAMP_SHIFT/ Shift clock signal output to the digital audio interface receiver and stream processor...
  • Page 86 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description CLINK_SEL Data selection signal output terminal for the DMPORT section 49 to 53 Audio signal input selection signal output terminal A_SEL0 to A_SEL4 MIC_SW Audio cable detection signal input from the A.CAL MIC ECM-AC2 jack TUNED Tuning detection signal input from the tuner (FM/AM) "L": tuned...
  • Page 87 HCD-X10 3 7 63 1515 0 MAIN BOARD IC1105 CXD9804R (RF AMP, SERVO DSP, MPEG DECODER) Pin No. Pin Name Description AGND Ground terminal DVDA AC coupled input path A DVDB AC coupled input path B DVDC AC coupled input path C...
  • Page 88 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description CD/DVD selection signal output terminal "L": CD, "H": DVD CKSW Chucking detection switch input terminal OCSW Disc table open/close detection switch input terminal EEWP Write protect signal output to the EEPROM DVDD18 Power supply terminal (+1.8V)
  • Page 89 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description Two-way data bus with the SD-RAM DVSS Ground terminal 117, 118 RD6, RD5 Two-way data bus with the SD-RAM DVSS Ground terminal 120, 121 RD4, RD3 Two-way data bus with the SD-RAM DVDD18 Power supply terminal (+1.8V)
  • Page 90 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description DVDD3 Power supply terminal (+3.3V) MUTE Muting signal output to the motor/coil driver MUTE123 Muting signal output to the motor/coil driver Loading motor drive signal output terminal (forward direction)
  • Page 91 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description JITFO Output terminal of the RF jitter meter JITFN Input terminal of the RF jitter meter PLLVSS Ground terminal IDAC Not used PLLVDD3 Power supply terminal (+3.3V) LPFON...
  • Page 92 HCD-X10 3 7 63 1515 0 MAIN BOARD IC1701 CXD9873Q (HDMI TRANSMITTER) Pin No. Pin Name Description DVSS Ground terminal (digital system) 2 to 9 C0 to C7 Digital chroma signal input terminal Not used DVDD33 Power supply terminal (+3.3V) (digital system)
  • Page 93 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description DAC_AVDD3 Power supply terminal (+3.3V) (analog system) (for D/A converter) AVSS Ground terminal (analog system) (for D/A converter) DAC_AVDD3 Power supply terminal (+3.3V) (analog system) (for D/A converter)
  • Page 94 HCD-X10 3 7 63 1515 0 MAIN BOARD IC1702 MB95F108ASPFV-GE1-H0701 (HDMI CONTROLLER) Pin No. Pin Name Description AVCC Power supply terminal (+3.3V) Reference voltage (+3.3V) input terminal PE3/INT13 to 3 to 6 Not used PE0/INT10 7 to 10 P83 to P80...
  • Page 95 HCD-X10 3 7 63 1515 0 Pin No. Pin Name Description TRAP2 NTSC/PAL selection signal output to the HDMI transmitter Two-way data bus with the HDMI transmitter Serial data transfer clock signal output to the HDMI transmitter AVSS Ground terminal...

  • Page 96: Exploded Views

    HCD-X10 SECTION 7 EXPLODED VIEWS 3 7 63 1515 0 NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are critical for safety.

  • Page 97: Q Q 7-2. Top Panel Section

    HCD-X10 3 7 63 1515 0 7-2. TOP PANEL SECTION not supplied not supplied L 13942296513 not supplied main section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark u163 A-1246-784-A T-SENSOR BOARD, COMPLETE 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3...

  • Page 98: Main Section

    HCD-X10 3 7 63 1515 0 not supplied 7-3. MAIN SECTION supplied supplied not supplied not supplied mechanism deck section not supplied not supplied L 13942296513 not supplied chasis section Note 1: In type-11 and type-12 of the MAIN board, the WIRE (FLAT TYPE) (11 CORE) connected with CN507 on the MAIN board is different.

  • Page 99: Chassis Section

    HCD-X10 3 7 63 1515 0 7-4. CHASSIS SECTION supplied not supplied supplied (US, CND) CN3005 (AEP, UK) F900 not supplied not supplied (MIC-002 board) (US, CND) supplied (AEP, UK) supplied with CN3005 not supplied supplied M3000 L 13942296513...

  • Page 100: Dvd Mechanism Deck Section (Cdm85-Dvbu102)

    HCD-X10 3 7 63 1515 0 7-5. DVD MECHANISM DECK SECTION (CDM85-DVBU102) (including disc tray open/close motor (M301), not supplied MS-203 board) not supplied not supplied not supplied (MS-203 board) L 13942296513 not supplied (disc tray open/close motor (M301))

  • Page 101: Electrical Parts List

    HCD-X10 SECTION 8 AV-001 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS The components identified by mark 0 or dotted line with mark 0 are critical for safety. parts list may be different from the parts All resistors are in ohms.
  • Page 102 HCD-X10 AV-001 AV-002 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark J400 1-694-920-21 TERMINAL BOARD (S TERMINAL+1P) R350 1-216-864-11 SHORT CHIP (MONITOR OUT S VIDEO (DVD ONLY)) R400 1-218-285-11 METAL CHIP...
  • Page 103 HCD-X10 AV-002 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q401 8-729-038-28 TRANSISTOR RT1N441C-TP-1 C418 1-162-970-11 CERAMIC CHIP 0.01uF Q402 8-729-038-28 TRANSISTOR RT1N441C-TP-1 C420 1-162-970-11 CERAMIC CHIP 0.01uF C421 1-165-908-11 CERAMIC CHIP...
  • Page 104 FB2001 1-469-324-21 FERRITE, EMI (SMD) (2012) IC2001 8-759-530-30 IC TC74VHCU04FT (EL) FB2002 1-469-324-21 FERRITE, EMI (SMD) (2012) IC2002 8-759-236-19 IC TC74HC151AF (EL) IC2003 6-600-466-01 IC TORX147L (SONY) < IC > (DIGITAL SAT/CABLE OPTICAL IN) IC2004 6-600-466-01 IC TORX147L (SONY) IC2001 8-759-530-30 IC TC74VHCU04FT (EL)
  • Page 105 HCD-X10 DISPLAY MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C806 1-115-339-11 CERAMIC CHIP 0.1uF C807 1-128-405-11 ELECT CHIP 22uF R829 1-216-864-11 SHORT CHIP C808 1-128-405-11 ELECT CHIP 22uF...
  • Page 106 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C507 1-107-826-11 CERAMIC CHIP 0.1uF 1-107-826-11 CERAMIC CHIP 0.1uF C508 1-107-826-11 CERAMIC CHIP 0.1uF 1-107-826-11 CERAMIC CHIP 0.1uF C509 1-165-908-11 CERAMIC CHIP...
  • Page 107 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C626 1-107-826-11 CERAMIC CHIP 0.1uF C1135 1-107-826-11 CERAMIC CHIP 0.1uF (US, CND) C1136 1-162-965-11 CERAMIC CHIP 0.0015uF 10% C627 1-117-681-11 ELECT CHIP...
  • Page 108 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1308 1-162-968-11 CERAMIC CHIP 0.0047uF 10% CN503 1-784-871-51 CONNECTOR, FFC (LIF (NON-ZIF)) 19P C1309 1-164-677-11 CERAMIC CHIP 0.033uF (AEP, UK)
  • Page 109 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FL1701 1-234-494-21 FILTER, EMI REMOVAL (SMD) * L1702 1-813-308-11 COMMON MODE CHOKE * L1703 1-813-308-11 COMMON MODE CHOKE FL1702 1-234-494-21 FILTER, EMI REMOVAL (SMD) FL1703 1-234-494-21 FILTER, EMI REMOVAL (SMD) <...
  • Page 110 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-833-11 METAL CHIP 1/10W 1-216-833-11 METAL CHIP 1/10W R469 1-218-285-11 METAL CHIP 1/10W 1-216-833-11 METAL CHIP 1/10W R470 1-216-841-11 METAL CHIP...
  • Page 111 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R644 1-216-841-11 METAL CHIP 1/10W R547 1-216-864-11 SHORT CHIP R651 1-216-864-11 SHORT CHIP R548 1-216-864-11 SHORT CHIP R652 1-218-847-11 METAL CHIP 0.5%...
  • Page 112 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R742 1-216-809-11 METAL CHIP 1/10W R749 1-216-809-11 METAL CHIP 1/10W R1138 1-216-864-11 SHORT CHIP R751 1-216-809-11 METAL CHIP 1/10W R1139...
  • Page 113 HCD-X10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1305 1-216-826-11 METAL CHIP 2.7K 1/10W R1306 1-216-833-11 METAL CHIP 1/10W R1731 1-216-864-11 SHORT CHIP R1307 1-216-833-11 METAL CHIP 1/10W...
  • Page 114 HCD-X10 MAIN MIC-002 MS-203 P-AMP 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RB602 1-233-576-11 RES, CHIP NETWORK 100 (3216) R305 1-216-864-11 SHORT CHIP RB603 1-233-576-11 RES, CHIP NETWORK 100 (3216)
  • Page 115 HCD-X10 P-AMP 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C922 1-128-951-21 ELECT 2200uF C3018 1-100-566-91 CERAMIC CHIP 0.1uF 0 C923 1-107-826-11 CERAMIC CHIP 0.1uF C3019 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 116 HCD-X10 P-AMP 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3079 1-107-826-11 CERAMIC CHIP 0.1uF C3186 1-126-964-11 ELECT 10uF C3080 1-107-826-11 CERAMIC CHIP 0.1uF C3187 1-117-370-11 CERAMIC CHIP 10uF C3081 1-115-185-11 CERAMIC CHIP 0.033uF...
  • Page 117 HCD-X10 P-AMP 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 D904 6-501-786-01 DIODE MAZ8220G0LS0 0 IC901 6-707-742-01 IC STR-F6168-LF1352 (AEP, UK) 0 D905 6-501-730-01 DIODE MAZ8051GMLS0 IC902 6-709-499-01 IC RT9H301C-T112-1...
  • Page 118 HCD-X10 P-AMP 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L3032 1-456-467-11 INDUCTOR 100uH 0 R918 1-215-927-00 METAL OXIDE (AEP, UK) < PHOTO COUPLER > 0 R918 1-216-488-11 METAL OXIDE...
  • Page 119 HCD-X10 P-AMP P-SW 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3030 1-216-809-11 METAL CHIP 1/10W R3106 1-216-809-11 METAL CHIP 1/10W R3031 1-216-809-11 METAL CHIP 1/10W R3032 1-216-809-11 METAL CHIP...
  • Page 120 HCD-X10 P-SW T-SENSOR 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark CN101 1-784-374-51 CONNECTOR, FFC/FPC 15P < RESISTOR > R100 1-216-821-11 METAL CHIP 1/10W R102 1-216-864-11 SHORT CHIP R103 1-216-864-11 SHORT CHIP <...
  • Page 121 HCD-X10 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 122 HCD-X10 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page.

Table of Contents