Page 4
You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte. Caring for the Environment by Recycling When you see this symbol on a Motorola product, do not dispose the product with household waste. Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste.
English Before you begin See figure 1 on page 1. Take a moment before you get started to familiarize yourself with your new H560 Headset. 1. Volume buttons 2. Speaker 3. Call button 4. Power switch 5. Indicator light 6. Microphone Charging your headset See figure 2 on page 1 Verify slide switch is in the off position (toward the charging port).
Wearing your headset See figure 3 on page 2 Your H560 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset’s earpiece speaker, and placed onto your ear when using your headset. Your headset’s performance is greatly dependent upon achieving a good fit on your ear.
2 Set your phone to look for your headset discovery, consult your phone’s user’s guide. The phone lists Bluetooth devices it finds. Motorola H560 in the list of discovered devices and confirm by following the on-screen prompts. Pairing is successful when the headset indicator light changes from steadily lit to flashing blue and purple.
Test and use Your phone and headset are now paired and ready to make and receive calls. To confirm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset.
Page 9
English Using your headset: making & receiving calls Your headset supports both Hands-free and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone’s user’s guide for more information. Note: Some features are phone/network dependent. Function Receive a call End a call...
Indicator lights Checking battery level While your headset is turned on and not on a call, you can check the battery charge level by pressing and holding both Volume buttons. The indicator light displays charge status for 5 seconds. The colour of the light indicates the remaining talk time.
Page 11
English Operating status (with no charger plugged in) Headset Indicator 3 blue flashes Steady blue Rapid blue/purple flashes Quick blue flash Slow blue pulse Slow blue flash Slow red flash Slow purple pulse Steady red Quick red flash Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on.
Audio tones Audio Tone Ascending tone 2 descending tones Ring tone 2 short tones when pressing Volume button High/low tones repeated every 60 sec. No audio indications; deteriorating quality 2 ascending tones 2 rapid ascending tones 2 rapid descending tones Low tone every 10 seconds Headset Status Powering on...
English Troubleshooting My headset will not enter pairing mode Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode.