Huawei HG532D Modem Configuration Manual

Adsl2 + 300m modem with router

Hide thumbs Also See for HG532D:

Download this manual See also: Configuration Manual, User Manual

Modem Configuration Guide

HG532D

Configuring in Layer2 PPPoE for Windows XP and 2000

IMPORTANT MESSAGE

Your modem has been pre-configured, you do not need to follow each step of the set-up guide but should retain this

document in case you need to manually configure your equipment.

To configure your PC/Laptop with your wireless password including changing your wireless password, please

proceed to step 4.

Contents

1. Physical Connection

2. Network Configuration

3. Configuring Internet

4. Configuring Wireless

5. IPTV

6. Change of Password

1. PHYSICAL CONNECTION

Have your router powered on and connected directly to your PC via Ethernet Cable before you begin, as these

instructions are based on wired Ethernet connection

2. NETWORK CONFIGURATION

PPPoE connection does not require you to have an IP address or DNS settings manually encoded on your network card.

PPPoE connection uses authentication to establish the Internet connection and once connected your modem will be

assigned an IP and DNS settings from TPG.

To begin, your PC needs to receive a private IP address from the router. Most ADSL routers have DHCP enabled by

default that will take care of this.

To ensure your Network Card is ready for this, please follow the following steps:

A. Click Start -> Settings -> Control Panel -> Network Connections

B. Right click on Local Area Connection and select Properties

HG532D

Page 1 Modem Configuration Guide HG532D HG532D Configuring in Layer2 PPPoE for Windows XP and 2000 IMPORTANT MESSAGE Your modem has been pre-configured, you do not need to follow each step of the set-up guide but should retain this document in case you need to manually configure your equipment.
Page 2 Modem Configuration Guide HG532D C. Double click on Internet Protocol TCP/IP D. Ensure “Obtain an IP address automatically” is selected E. Ensure “Obtain DNS server address automatically” is selected F. Click OK 3. CONFIGURING ROUTER A. Open your browser and in the address bar type http://192.168.1.1 and press Enter...
Page 3 Modem Configuration Guide HG532D C. You will see the screen as shown on the right. D. Enter your TPG username and password. Click Next. E. You can change your WiFi details or elect to keep the default settings. The default WiFi SSID is printed on the sticker underneath your modem.
Page 4 Modem Configuration Guide HG532D C. Right click on Wireless Network Connection and click ‘View Available Wireless Networks’ D. Find the SSID (network name) of your router and click Connect. By the default, the network name should be TPG-xxxx (xxxx is a random 4 digit alpha numeric code).