hit counter script
Sony HTC-V5550 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HTC-V5550
  6. Service manual

Sony HTC-V5550 Service Manual

Hide thumbs Also See for HTC-V5550:
Table of Contents

Advertisement

Quick Links

QQ
3 7 63 1515 0
SERVICE MANUAL
• This set is the deck and Video CD
section in MHC-V5550/V7770.
This stereo system is equipped with the Dolby B-
type noise reduction system.
* Manufactured under license from Dolby
Laboratories Licensing Corporation.
DOLBY, the double-D symbol a and "PRO LOGIC"
are trademarks of Dolby Laboratories Licensing
Corporation.
TE
L 13942296513
Video section
Inputs
Outputs
VIDEO CD/CD player section
System
Laser
Laser output
www
.
MICROFILM
http://www.xiaoyu163.com
AV INPUT VIDEO (phono jack):
1Vp-p, 75 Ω
VIDEO IN (phono jack)
1Vp-p, 75 Ω
MONITOR OUT (phono jack):
1Vp-p, 75 Ω
VIDEO OUT (phono jack)
1Vp-p, 75 Ω
S-VIDEO (4-pin/mini-DIN jack):
Y: 1Vp-p, unbalanced, sync negative
C: 0.286Vp-p, load impedance 75 Ω
Compact disc, digital audio video system
Semiconductor laser (λ=780nm)
Emission duradon: continuous
Max. 44.6µW*
*This output is the value measured at a
diatance of 200 mm from the objective
lens surface on the Optical Pick-up Block
with 7 mm aperture.
x
ao
u163
y
i
http://www.xiaoyu163.com
HTC-V5550
2 9
8
Model Name Using Similar Mechanism
CD
CD Mechanism Type
Section
Base Unit Type
Optical Pick-up Name
Model Name Using Similar Mechanism
Tape deck
Q Q
3
6 7
1 3
1 5
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Frequency response
Wavelength
Signal to noise ratio
Dynamic range
Video Color System format
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
Tape player section
Recording system
Frequency response
(DOLBY NR OFF)
Design and specifications are subject to change without notice.
co
.
9 4
2 8
E Model
Chinese Model
HCD-V717
CDM38-5BD24
BU-5BD24
KSS-213BA/F-NP
HTC-W555
TCM-230AWR2
0 5
8
2 9
9 4
2 8
TCM-230PWR2
20 Hz – 20 kHz (±1 dB)
780 – 790 nm
More than 90 dB
More than 90 dB
NTSC, PAL
600 nm
–18 dBm
4-track 2-channel stereo
40 – 13,000 Hz (±3 dB),
using Sony TYPE
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE
cassette
m
COMPACT DISC DECK
9 9
9 9

Advertisement

Table of Contents
loading

Related Manuals for Sony HTC-V5550

Summary of Contents for Sony HTC-V5550

  • Page 1 4-track 2-channel stereo Frequency response 40 – 13,000 Hz (±3 dB), System Compact disc, digital audio video system (DOLBY NR OFF) using Sony TYPE Laser Semiconductor laser (λ=780nm) cassette Emission duradon: continuous 40 – 14,000 Hz (±3 dB), Laser output Max.
  • Page 2 COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    http://www.xiaoyu163.com 3 7 63 1515 0 TABLE OF CONTENTS 1. SERVICING NOTE ............4 2. GENERAL ................7 3. DISASSEMBLY 3-1. Loading Panel ..............8 3-2. Back Panel and CD Mechanism Deck ......8 3-3. Front Panel ..............9 3-4. TC Mechanism Deck and Cassette Holder ..... 9 3-5.

  • Page 4: Servicing Note

    http://www.xiaoyu163.com SECTION 1 SERVICING NOTE 3 7 63 1515 0 HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF 1 Remove the Case. 3 Pull-out the disc tray. Turn the cam to the direction of arrow. Note for Installation (ROTARY ENCODER) L 13942296513 Note:When attaching the Base unit, Insert the BU cam...
  • Page 5 http://www.xiaoyu163.com 3 7 63 1515 0 Connection and Operations of the Unit by Itself This unit cannot be operated by itself as it does not come with a power supply. Connect STR-V5550/V7770 as shown in “Connection 1” before beginning servicing. Connection 1: If there is STR-V5550/V7770.
  • Page 6 http://www.xiaoyu163.com 3 7 63 1515 0 Cold Reset NOTE: This is the mode for operating the unit by itself. Take note that the operating method differs when connected to the STR-V5550/ V7770. This method is described in the manuals of the STR-V5550 and STR-V7770. Refer to these manuals for details. This mode is used for initializing the RAM contents.

  • Page 7: General

    http://www.xiaoyu163.com SECTION 2 GENERAL 3 7 63 1515 0 Front Panel 2 3 4 !º #¡ !¡ !™ !£ !¢ !∞ #º !§ @ª !¶ @• !• @¶ @§ @∞ @¢ @£ @™ @¡ @º !ª L 13942296513 LOCATION OF PARTS AND CONTROLS !¶...

  • Page 8: Disassembly

    http://www.xiaoyu163.com SECTION 3 DISASSEMBLY 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-1. LOADING PANEL 3 Loading panel (Remove two claws) Two claws 2 Pull-out the disc tray. 1 Turn the cam to the direction of arrow.

  • Page 9: Front Panel

    http://www.xiaoyu163.com 3 7 63 1515 0 3-3. FRONT PANEL 2 Flat type wire 1 Flat type wire (17core, CNS104) (17core, CNS102) 3 Flat type wire (15core, CNS101) 4 Connector (CN113) 6 Lead (with connector) 8 Front panel (Remove the catcher) Catcher 7 Connector (CNP105) 5 Two screws...

  • Page 10: Disc Tray

    http://www.xiaoyu163.com 3 7 63 1515 0 3-5. DISC TRAY Note: When installing the Disc tray, pull around the flat type wire to pass through the claw A and claw B , as shown in the figure. 3 Flat type wire (8 core) 4 Two claws 2 Pull-out the disc tray.

  • Page 11: Mechanical Adjustments

    http://www.xiaoyu163.com SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS 3 7 63 1515 0 Precaution Read before adjustments Clean the following parts with a denatured alcohol-moistened To adjust the unit, operate the unit by itself using the conduction jig swab: (PFJ-1).
  • Page 12 http://www.xiaoyu163.com 3 7 63 1515 0 Turn the adjustment screw and check output peaks. If the peaks Tape Speed Adjustment (Deck B) do not match for L-CH and R-CH, turn the adjustment screw so that outputs match within 1 dB of peak. Note: Set the test mode using the following method and begin tape speed adjustment.
  • Page 13 http://www.xiaoyu163.com 3 7 63 1515 0 Record Bias Adjustment (Deck B) Record Level Adjustment (Deck B) Procedure: Procedure: Press the p (CD) button while pressing the DIRECTION Press the p (CD) button while pressing the DIRECTION MODE button. MODE button. While pressing the p (CD) button, press the ª...
  • Page 14 http://www.xiaoyu163.com 3 7 63 1515 0 RF signal waveform CD SECTION Notes: VOLT/DIV: 200 mV TIME/DIV: 500 ns 1. CD block basically constructed to operate without adjustment. There- (with the 10: 1 probe fore, check each item in order given. in use) 2.

  • Page 15: Diagrams

    HTC-V5550 SECTION 6 DIAGRAMS 3 7 6 3 1 5 1 5 0 6-1. CIRCUIT BOARDS LOCATION VIDEO SECTION Frequency Adjustment Connection: frequency counter VIDEO board VIDEO board REGULATOR board TP508 (27 MHz) – CD (P) board VIDEO IN/OUT board...

  • Page 16: Block Diagrams

    HTC-V5550 6-2. BLOCK DIAGRAMS 3 7 6 3 1 5 1 5 0 — SERVO SECTION — MCLK IC104 33.8MHz (Page 19) FILTER RF AMP, FOCUS/TRACKING ERROR AMP IC103 DETECTOR A+5V XTSL CTL1 CLOCK DIGITAL SIGNAL PROCESSOR GENERATOR IC101 (1/2)(BD BOARD)

  • Page 17: Audio/Video Cd Section

    HTC-V5550 3 7 6 3 1 5 1 5 0 — AUDIO/VIDEO CD SECTION — (Page 18) DIGITAL FILTER, D/A CONVERTER IC509 (Page 23) MPEG VIDEO/AUDIO DECODER, DIGITAL DA-DATA DATA CD-L VOUTL VIDEO SIGNAL PROCESSOR MPEG INPUT LOW-PASS AUDIO...

  • Page 18: Tape Deck Section

    HTC-V5550 3 7 6 3 1 5 1 5 0 — TAPE DECK SECTION — DECK PROCESS DECK A/B SELECT, PB/REC EQ AMP, DOLBY NR AMP, ALC, AMS • SIGNAL PATH IC301 : PB (DECK A) HP101 DOLBY PASS...

  • Page 19: Power Section

    HTC-V5550 3 7 6 3 1 5 1 5 0 — POWER SECTION — M12V THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. +7.5V REG +12V REG A+7.5V IC851 (In addition to this, the necessary note is printed Q852 in each block.)

  • Page 20: Printed Wiring Board - Cd Section

    HTC-V5550 6-3. PRINTED WIRING BOARD — CD SECTION — • Refer to page 16 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 (Page 50) •...

  • Page 21: Schematic Diagram - Cd Section

    HTC-V5550 6-4. SCHEMATIC DIAGRAM — CD SECTION — • Refer to page 55 for Waveforms. 3 7 6 3 1 5 1 5 0 • Refer to page 58, 59 for IC Block Diagrams. 1 3 9 4 2 2 9 6 5 1 3...

  • Page 22: Schematic Diagram - Deck Section

    HTC-V5550 6-5. SCHEMATIC DIAGRAM — DECK SECTION — • Refer to page 59 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 MAIN BOARD 1 3 9 4 2 2 9 6 5 1 3...

  • Page 23: Printed Wiring Board - Deck Section

    HTC-V5550 6-6. PRINTED WIRING BOARD — DECK SECTION — • Refer to page 16 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3 MAIN BOARD...

  • Page 24: Printed Wiring Board - Main Section

    HTC-V5550 6-7. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 16 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 (Page 41) (Page 41) (Page 47) (Page 47) (Page 50) (Page 40)

  • Page 25: Schematic Diagram - Main (1/2) Section

    HTC-V5550 6-8. SCHEMATIC DIAGRAM — MAIN (1/2) SECTION — • Refer to page 59 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 (Page 40) (Page 46) (Page 46) (Page 51) (Page 30) 1 3 9 4 2 2 9 6 5 1 3...

  • Page 26: Schematic Diagram - Main (2/2) Section

    HTC-V5550 6-9. SCHEMATIC DIAGRAM — MAIN (2/2) SECTION — • Refer to page 33 for Printed Wiring Board. 3 7 6 3 1 5 1 5 0 • Refer to page 60 for IC Pin Function Description. 1 3 9 4 2 2 9 6 5 1 3...

  • Page 27: Printed Wiring Board - Leaf Sw Section

    HTC-V5550 6-10. PRINTED WIRING BOARD — LEAF SW SECTION — • Refer to page 16 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 MAIN BOARD CNS104 (Page 33) 6-11. SCHEMATIC DIAGRAM — LEAF SW SECTION —...

  • Page 28: Printed Wiring Board - Panel Section

    HTC-V5550 6-12. PRINTED WIRING BOARD — PANEL SECTION — • Refer to page 16 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 (Page 33) 1 3 9 4 2 2 9 6 5 1 3...

  • Page 29: Schematic Diagram - Panel Section

    HTC-V5550 6-13. SCHEMATIC DIAGRAM — PANEL SECTION — 3 7 6 3 1 5 1 5 0 (Page 37) 1 3 9 4 2 2 9 6 5 1 3 (Page 37) w w w u 1 6 3 (Page 37) —...

  • Page 30: Schematic Diagram - Cd Motor Section

    HTC-V5550 6-14. SCHEMATIC DIAGRAM — CD MOTOR SECTION — • Refer to page 59 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 MAIN BOARD CN112 (Page 35) 1 3 9 4 2 2 9 6 5 1 3...

  • Page 31: Printed Wiring Board - Cd Motor Section

    HTC-V5550 6-15. PRINTED WIRING BOARD — CD MOTOR SECTION — • Refer to page 16 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 MAIN BOARD CN112 (Page 34) 1 3 9 4 2 2 9 6 5 1 3...

  • Page 32: Printed Wiring Board - Video Section

    HTC-V5550 6-16. PRINTED WIRING BOARD — VIDEO SECTION — • Refer to page 16 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 (Page 34) • Semiconductor • Semiconductor Location Location Ref. No. Location Ref. No. Location...

  • Page 33: Schematic Diagram - Video (1/2) Section

    HTC-V5550 6-17. SCHEMATIC DIAGRAM — VIDEO (1/2) SECTION — • Refer to page 61 for IC Pin Function Description. 3 7 6 3 1 5 1 5 0 • Refer to page 55 to 57 for Waveforms. (Page 27)

  • Page 34: Schematic Diagram - Video (2/2) Section

    HTC-V5550 6-18. SCHEMATIC DIAGRAM — VIDEO (2/2) SECTION — • Refer to page 49 for Printed Wiring Board. • Refer to page 55 to 57 for Waveforms. 3 7 6 3 1 5 1 5 0 • Refer to page 59 for IC Block Diagrams.
  • Page 35 http://www.xiaoyu163.com 3 7 63 1515 0 • Waveforms – VIDEO BOARD – – BD BOARD – 1 IC101 @§ (RFDC) 200 mV/DIV, 500 ns/DIV 6 IC101 $¶ (BCLK) 1 IC501 5 (LRCK) +0.25 Vp-p 5.2 Vp-p –0.20 5 Vp-p 22.8 µ s 474 ns !£...
  • Page 36 http://www.xiaoyu163.com 3 7 63 1515 0 !ª &∞ !§ IC505 `⁄⁄⁄ (DA-BCK), IC509 !¶ (BCK) 6 IC402 !¡ IC505 (XIN) (C-OUT) 4.8 Vp-p 3.4 Vp-p 0.5 Vp-p 8.1 MHz 472 ns @º *§ !¶ Q301 (Base) 7 IC402 !™ IC505 (XOUT) (DA-XCLK) 1.8 Vp-p...
  • Page 37 http://www.xiaoyu163.com 3 7 63 1515 0 @§ IC401 5 @¡ IC509 @º (384FSO) 1 Vp-p 5.1 Vp-p 59 ns @¶ IC401 7 @™ IC509 @¡ (768FSO) 2 Vp-p 4.8 Vp-p 30 ns @• J301 3 (COUT) @£ IC509 @¢ (XT2) L 13942296513 1 Vp-p 1 Vp-p...

  • Page 38: Ic Block Diagrams

    http://www.xiaoyu163.com 3 7 63 1515 0 6-19. IC BLOCK DIAGRAMS –BD BOARD – IC101 CXD2545Q SFDR RFDC SSTP FILO LOCK FILI CLTV AVSS RFAC L 13942296513 BIAS DFCT MIRR ASYI COUT CLOK XLAT DATA ASYO AVDD ATSK DFSW SCLK ASYE DIRC XRST SENS...
  • Page 39 http://www.xiaoyu163.com 3 7 63 1515 0 IC103 CXA1821M-T6 –VIDEO IN/OUT BOARD – IC601 NJM4580D-D A OUT LD ON A –IN B OUT LC/PD APC LD AMP VREF RF EQ AMP A +IN B –IN RF SUMMING AMP B +IN V– FOCUS ERROR AMP FE BIAS TRACKING ERROR AMP...

  • Page 40: Ic Pin Functions Description

    http://www.xiaoyu163.com 3 7 63 1515 0 6-20. IC PIN FUNCTION DESCRIPTION • MAIN BOARD IC101 MASTER CONTROL (uPD780016AYGF-018-3BA) Description Pin No. Pin Name CAPM-EMG (+) Capstan motor control 1 (+) signal output 2 to 7 LED1 to LED6 — Not used —...
  • Page 41 http://www.xiaoyu163.com 3 7 63 1515 0 Pin No. Pin Name Description TBL-L Table motor control output TBL-R — Not used LOAD-OUT Loading motor control signal output LOAD-IN CD-PAUSE DECO2 CD-PLAY LED ON/OFF control output EXIST3 EXIST1 DISC3 Ground — DISC1 LED ON/OFF control output SENSE2 BD Condition signal input...
  • Page 42 http://www.xiaoyu163.com 3 7 63 1515 0 • VIDEO BOARD IC502 M30620MC-302FP (CD MECHSNIAM CONTROLLER) Pin No. Pin Name Description SENSE Internal status (SENSE) signal input from the CXD2545Q (IC101) SENSE CLK Sense serial data reading clock signal output to the CXD2545Q (IC101) Serial data output to the CXD2545Q (IC101) DSP DATA DSP LATCH...
  • Page 43 http://www.xiaoyu163.com 3 7 63 1515 0 Pin No. Pin Name Description — Not used (open) BUS XHOLD Hold signal input terminal Not used (fixed at “H”) — Not used (open) 42,43 SHIMUKE Destination setting terminal “L”: Chinese, “H”: English Vertical synchronized signal input from the MPEG video/audio decoder (IC505) “L” active BUS XWRL —...
  • Page 44 http://www.xiaoyu163.com 3 7 63 1515 0 • VIDEO BOARD IC505 CL680T-D1 (MPEG VIDEO/AUDIO DECODER< VIDEO SIGNAL PROCESSOR) Description Pin No. Pin Name — Not used (open) — Ground terminal CD-BCK CD decode bit clock signal (2.8224 MHz) input from the CXD2545Q (IC101) CD-DATA CD decode data input from the CXD2545Q (IC101) CD decode L/R sampling clock signal (44.1 kHz) input from the CXD2545Q (IC101)
  • Page 45 http://www.xiaoyu163.com 3 7 63 1515 0 Pin No. Pin Name Description RREF Fix the video signal output level control VREF Reference voltage (+1.235V) output terminal AVDD-DAC — Power supply terminal (+3.3V) (for D/A converter) C-OUT Chrominance video signal output terminal AGND-DAC —...
  • Page 46 http://www.xiaoyu163.com 3 7 63 1515 0 Pin No. Pin Name Description VDD3 — Power supply terminal (+3.3V) HSEL Command selection signal input from the CD mechanism controller (IC502) CDG-SDATA — Not used (fixed at “L”) CDG-VFSY — Not used (fixed at “L”) CDG-S0S1 —...

  • Page 47: Exploded Views

    http://www.xiaoyu163.com SECTION 7 EXPLODED VIEWS 3 7 63 1515 0 NOTE: • -XX, -X mean standardized parts, so they may • The mechanical parts with no reference number The components identified by mark ! or have some differences from the original one. in the exploded views are not supplied.

  • Page 48: Front Panel Section

    X-4950-222-1 FRONT PANEL ASSY 4-210-045-01 DAMPER X-4950-013-1 ESCUTCHEON (TC) ASSY 4-977-358-11 CUSHION X-4950-223-1 ESCUTCHEON (CD) ASSY 3-019-456-01 SCREW, STEP 4-962-708-11 EMBLEM (4-A), SONY 4-900-888-01 EJECT (LEVER-L) u163 4-900-881-01 BUTTON (EJECT A) 4-900-889-01 EJECT (LEVER-R) 4-900-882-01 BUTTON (EJECT B) * 71 1-669-420-11 CD (P) BOARD 4-951-620-01 SCREW (2.6 ×...

  • Page 49: Cd Mechanism Section 1 (Cdm38-5Bd24)

    http://www.xiaoyu163.com 3 7 63 1515 0 7-3. CD MECHANISM SECTION 1 (CDM38-5BD24) M701 L 13942296513 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-981-789-11 BRACKET (2), YOKE 4-977-941-01 BEARING (WORM) 4-977-945-01 TRAY (TURN) * 209 1-658-576-11 SENSOR BOARD X-4946-665-1 SHAFT ASSY, WORM 4-934-376-01 SHAFT (ROLLER) 4-977-943-01 BELT (TURN) (1.2)

  • Page 50: Cd Mechanism Section 2 (Cdm38-5Bd24)

    http://www.xiaoyu163.com 3 7 63 1515 0 7-4. CD MECHANISM SECTION 2 (CDM38-5BD24) supplied not supplied L 13942296513 M801 BU-5BD24 S811 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-981-789-11 BRACKET (2), YOKE * 260 X-4946-668-1 CHASSIS (CDM) ASSY 4-977-954-01 PULLEY (SL) 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING 4-977-953-01 GEAR (SL-A)

  • Page 51: Base Unit Section (Bu-5Bd24)

    http://www.xiaoyu163.com 3 7 63 1515 0 7-5. BASE UNIT SECTION (BU-5BD24) M101 L 13942296513 M102 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks ! 301 8-848-379-31 OPTICAL PICK-UP BLOCK KSS-213BA/F-NP 4-917-564-01 GEAR (P), FLATNESS 1-769-069-11 WIRE (FLAT TYPE) (16 CORE) * 307 A-4699-697-A BD BOARD, COMPLETE 4-917-567-01 GEAR (M)

  • Page 52: Tc Mechanism Section 1 (Tcm-230Awr2)

    http://www.xiaoyu163.com 3 7 63 1515 0 7-6. TC MECHANISM SECTION 1 (TCM-230AWR2/230PWR2) * NOTE: Two types of parts which are not interchangeable are available for the Head deck (A) ASSY and Head deck (B) ASSY. When replacing the parts, refer to the following figure, and use the appropriate part Parts with “P”...

  • Page 53: Tc Mechanism Section 2 (Tcm-230Awr2)

    http://www.xiaoyu163.com 3 7 63 1515 0 7-7. TC MECHANISM SECTION 2 (TCM-230AWR2/230PWR2) * NOTE: Two types of parts which are not interchangeable are available for the mechanical block assembly. When replacing the parts, refer to the following figure, and use the appropriate part. Parts with “P”...

  • Page 54: Electrical Parts List

    http://www.xiaoyu163.com SECTION 8 AUDIO ELECTRICAL PARTS LIST 3 7 63 1515 0 NOTE: • Due to standardization, replacements in the • CAPACITORS: • SEMICONDUCTORS parts list may be different from the parts uF: µF In each case, u: µ, for example: specified in the diagrams or the components •...
  • Page 55 http://www.xiaoyu163.com AUDIO 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R601 1-249-409-11 CARBON 1/4W F C161 1-163-038-91 CERAMIC CHIP 0.1uF R602 1-249-409-11 CARBON 1/4W F C162 1-163-275-11 CERAMIC CHIP 0.001uF R608 1-249-409-11 CARBON 1/4W F R609...
  • Page 56 http://www.xiaoyu163.com CD (P) CONNECTOR LEAF SW 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R160 1-216-295-91 SHORT R251 1-249-407-11 CARBON 1/4W F R161 1-216-308-00 METAL CHIP 1/10W R252 1-249-407-11 CARBON 1/4W F R162 1-216-101-00 METAL CHIP 150K...
  • Page 57 http://www.xiaoyu163.com LEAF SW MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC > C307 1-126-959-11 ELECT 0.47uF C308 1-126-964-11 ELECT 10uF IC1001 8-749-014-38 IC PHOTO INTERRUPTER SG-264 C309 1-137-194-81 FILM 0.47uF IC1002 8-749-014-38 IC PHOTO INTERRUPTER SG-264...
  • Page 58 http://www.xiaoyu163.com MAIN MOTOR (SLIDE) 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R135 1-247-807-31 CARBON 1/4W R342 1-249-411-11 CARBON 1/4W R136 1-247-807-31 CARBON 1/4W R343 1-249-437-11 CARBON 1/4W R139 1-249-429-11 CARBON 1/4W R351 1-249-435-11 CARBON...
  • Page 59 http://www.xiaoyu163.com MOTOR (TURN) REGULATOR SENSOR TC (A) TC (B) TC LED 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-658-577-11 MOTOR (TURN) BOARD 1-669-422-11 TC (A) BOARD ******************* ************ < CAPACITOR > <...
  • Page 60 http://www.xiaoyu163.com TC (P) VIDEO 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-669-421-11 TC (P) BOARD C406 1-110-530-11 ELECT CHIP 1000uF 6.3V C407 1-165-319-11 CERAMIC CHIP 0.1uF ************ C408 1-165-319-11 CERAMIC CHIP 0.1uF <...
  • Page 61 http://www.xiaoyu163.com VIDEO 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CONNECTOR > R324 1-216-022-00 METAL CHIP 1/10W R325 1-216-295-91 SHORT CN501 1-770-706-11 CONNECTOR, FFC/FPC 23P R327 1-216-049-91 RES, CHIP 1/10W CN503 1-779-416-11 CONNECTOR,FFC (LIF(NON-ZIF))13P R328...
  • Page 62 http://www.xiaoyu163.com VIDEO VIDEO IN/OUT 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R519 1-216-025-91 RES, CHIP 1/10W 1-666-010-11 VIDEO IN/OUT BOARD R520 1-216-057-00 METAL CHIP 2.2K 1/10W ****************** R523 1-216-013-00 METAL CHIP 1/10W R530 1-216-081-00 METAL CHIP...
  • Page 63 http://www.xiaoyu163.com 3 7 63 1515 0 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks *************** HARDWARE LIST *************** 7-685-647-79 SCREW +BVTP 3 × 10 TYPE2 N-S 7-685-646-79 SCREW +BVTP 3 × 8 TYPE2 N-S 7-621-775-10 SCREW +B 2.6 × 4 7-621-255-15 SCREW +P 2 ×...
  • Page 64 HTC-V5550 3 7 63 1515 0 L 13942296513 u163 Sony Corporation 98H1670084-1D Printed in Singapore ©1998.8 Home A&V Products Company 9-922-959-11 Published by Quality Assurance Dept. — 84 — (Shibaura) http://www.xiaoyu163.com...

Table of Contents