hit counter script

Advertisement

SERVICE MANUAL
Ver. 1.0 2008.03
System
[DVD recorder section]
Laser
Semiconductor laser
Audio recording format
Dolby Digital
Video recording format
MPEG Video
[Timer section]
Clock
Quartz locked
Timer indication
12-hour cycle
Timer setting
12 programs (max.)
Inputs and outputs
LINE 1 IN and LINE 2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jacks (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
S VIDEO, 4-pin, mini-DIN jack
Y: 1.0 Vp-p, unbalanced, sync negative
C: 0.286 Vp-p, load impedance 75 ohms
DV IN, 4-pin jack, i.LINK S100
RDR-GX360
SPECIFICATIONS
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO OUT, phono jacks (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
DIGITAL AUDIO OUT
COAXIAL, phono jack
Output signal: 0.5 Vp-p, 75 ohms
COMPONENT VIDEO OUT (Y, P
Phono jack
Y: 1.0 Vp-p/P
, P
: 0.7 Vp-p, 75 ohms
B
R
SET TOP BOX CONTROL
Mini jack
HDMI OUT
HDMI 19 pin-Standard Connector
USB
USB jack Type A (For connecting
camcorders or digital still cameras)
General
Power requirements
120 V AC, 60 Hz
Power consumption
17 W
Power back-up
Back-up duration: 30 min
RMT-D254A
Operating temperature
5°C to 35°C (41°F to 95°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Operating humidity
25% to 80%
Dimensions including projecting parts
and controls (w/h/d)
Approx. 430 × 59 × 225 mm
(Approx. 17 × 2
Mass
Approx. 2.4 kg (Approx. 5.3 lbs)
, P
)
B
R
Supplied accessories
Remote commander (remote) (1)
Size AA (R6) batteries (2)
Audio/video cord (1)
Set top box controller (1)
Design and specifications are subject to change
without notice.

DVD RECORDER

US Model
3
× 8
7
/
/
inches)
8
8

Advertisement

Table of Contents
loading

Summary of Contents for Sony RMT-D254A

  • Page 1: Dvd Recorder

    RDR-GX360 RMT-D254A SERVICE MANUAL US Model Ver. 1.0 2008.03 SPECIFICATIONS System LINE OUT Operating temperature 5°C to 35°C (41°F to 95°F) VIDEO OUT, phono jack (1) [DVD recorder section] Storage temperature Output signal: 1 Vp-p, 75 ohms, Laser –20°C to 60°C (–4°F to 140°F)
  • Page 2 LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. — 2 —...
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Precautions Safety Precautions ······························································ 4 Servicing Precautions ························································ 6 ESD Precautions ································································· 7 Handling the Optical Pick-up ············································· 8 General Ways to Use Your DVD Recorder ··································· 1-1 How to Use the On-Screen Menus ·································· 1-1 Hookups and Settings ······················································ 1-2 Quick Guide to Disc Types ··············································...
  • Page 4: Safety Precautions

    PRECAUTIONS 1 SAFETY PRECAUTIONS 1) Before returning an instrument to the customer, always make a (4) Insulation Resistance Test Cold Check-(1) Unplug the power safety check of the entire instrument, including, but not limited supply cord and connect a jumper wire between the two prongs to, the following items: of the plug.
  • Page 5 6) Product Safety Notice-Some electrical and mechanical parts have special safety-related characteristics which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified by shading, an ( ) or a ( ) on...
  • Page 6: Servicing Precautions

    2 SERVICING PRECAUTIONS CAUTION: Before servicing units covered by this service manual 2-2 Insulation Checking Procedure and its supplements, read and follow the Safety Precautions section of this manual. Disconnect the attachment plug from the AC outlet and turn the power ON.
  • Page 7: Esd Precautions

    3 ESD PRECAUTIONS Electrostatically Sensitive Devices (ESD) Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated circuits and some field-effect transistors and semiconductor chip components.
  • Page 8: Handling The Optical Pick-Up

    4 HANDLING THE OPTICAL PICK-UP The laser diode in the optical pick up may suffer electrostatic breakdown because of potential static electricity from clothing and your body. The following method is recommended. (1) Place a conductive sheet on the work bench (The black sheet used for wrapping repair parts.) (2) Place the set on the conductive sheet so that the chassis is grounded to the sheet.
  • Page 9: General

    RDR-GX360 1. GENERAL This section is extracted from instruction manual. (3-296-710-11) Creating your own program – Playlist Ways to Use Your DVD Recorder , Record a program on a DVD-RW (VR Original mode) or DVD-R (VR mode), then erase, Recording and timer recording move or add scenes as you like without changing the original contents.
  • Page 10: Hookups And Settings

    Connecting a cable box/satellite receiver and set top box controller Step 2: Connecting the Hookups and Settings Connect the LINE 1 IN jacks using an audio/video cord. Cable Box/Satellite With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the cable Hooking Up the Recorder Receiver (Tuner) box or satellite receiver is turned on.
  • Page 11 If your TV has component video input jacks Connect the HDMI* OUT jack using a certified Sony HDMI cord (not supplied). You will enjoy high Connect the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three quality picture and sound.
  • Page 12: Power Cord

    12, 14 Daewoo 04, 22 Notes Daytron 03, 12 • If the supplied remote interferes your other Sony DVD Fisher recorder or player, change the command mode number TV DIGITAL/ for this recorder (page 22). General Electric 04, 06, 10 TV "/1...
  • Page 13: Connecting A Vcr Or Similar Device

    Switch the input selector on your TV so that Press ENTER. Checking the cable box/satellite the signal from the recorder appears on Easy Setup No Disc receiver control setting Easy Setup 10:10 AM No Disc your TV screen. Enter the brand code of your set top box.
  • Page 14: Quick Guide To Disc Types

    Notes • Do not connect more than one type of video cord between the recorder and your TV at the same time. Quick Guide to Disc Types • Pictures containing copy protection signals that prohibit any copying cannot be recorded. You cannot dub from DVD VIDEOs to this recorder.
  • Page 15: Playback

    z Hints Note on playback operations of DVD VIDEOs/ Note on DVD+RWs/DVD+Rs, DVD-RWs/DVD- • You can play DATA CDs or DATA DVDs with MP3 VIDEO CDs Rs, or CD-RWs/CD-Rs recorded on other Playback audio tracks or JPEG image files (pages 41 or 42). equipment Some playback operations of DVD VIDEOs/ •...
  • Page 16 – you edit the title after stopping playback. Playing quickly with sound (Scan One-Touch Play (for HDMI Playing a Title From the – you make a recording. Audio) connections only) (DVDs with Dolby Digital soundtracks Title List Playing restricted DVDs (Parental only) Press H PLAY.
  • Page 17 Also appears in stop mode with Resume Play If you insert a DATA CD/DATA DVD Playing JPEG image files activated (page 37). Playing MP3 Audio Tracks containing only MP3 audio tracks, the “Music” display appears. Go to step 4. Title type (original or Playlist) for DVD-RWs (VR You can play JPEG image files on DATA CDs or and JPEG Image Files on mode)/DVD-Rs (VR mode)/DVD-RAMs.
  • Page 18 z Hints Select “Photo,” “Music,” or “Movie,” and Playing From a Connected • The recorder can play movie files that are recorded press ENTER. with an HDD camcorder and have the extension • To play MP3 audio tracks, select “Music.” USB Device “.MPG.”...
  • Page 19: Recording

    Press Z OPEN/CLOSE to close the disc z Hint Checking the disc status while Recording From Connected You can turn off the TV during recording. tray. recording Wait until “LOAD” disappears from the front Equipment Without the Notes panel display. You can check the recording information such as Timer Unused discs are automatically formatted.
  • Page 20 Select the timer setting you want to change • You cannot change the timer settings for a recording Changing or Canceling currently underway. Recording From Connected or cancel, and press ENTER. The sub-menu appears. Timer Settings (Timer List) Equipment With a Timer Timer List 10:10 AM (Synchro Rec)
  • Page 21: Editing

    z Hints Edit options for DVD-RWs (VR mode)/ • You can switch the Title List to show original or Editing a Title Editing DVD-Rs (VR mode) Playlist. While the Title List menu is turned on, press ORIGINAL/PLAYLIST repeatedly. • You can rename or erase a Playlist title (page 64). - RW - RW Video...
  • Page 22: Creating A Playlist

    Press ENTER at the point where you want to Select the character you want to enter Changing the Name of a using M/m/</,, and press ENTER. Creating a Playlist divide the title. You can use H PLAY, The selected character appears in the input Title .
  • Page 23: Other Equipment

    B “Disc Protect” (DVD+RWs/DVD-RWs To return to the previous display Press O RETURN. Finalizing a Disc (Preparing Z OPEN/ (VR mode)/DVD-Rs (VR mode) only): CLOSE Protects all titles on the disc when a Disc for Playback on z Hints “Protected” is selected. To cancel the •...
  • Page 24: Dv/D8 Dubbing (Dv/D8 → Dvd)

    (USB) (8 cm) (12 cm) ◆Connectable USB devices (as of January 2008) Check the USB indicator lights up in the front The following Sony devices can be connected to DVD+RW DVD+RW panel display. this recorder: DVD-RW (Video mode) DVD-RW...
  • Page 25: Usb Dubbing (Usb → Dvd)

    Select an album (folder) and press ENTER. Select “USB Dubbing,” and press ENTER. Dubbing From a HDD The movie file list appears. USB Dubbing No Disc 10:10 AM Select the movie file to dub, and press Camcorder (Program Title List DVD Backup SET.
  • Page 26: Settings And Adjustments

    Select “Copy Album,” and press ENTER. Select “Setup,” and press ENTER. The album list appears. The “Setup” display appears. Settings and Adjustments To view image files contained in the album, Setup 10:10 AM select the album and press ENTER. Using the Setup Displays Title List Clock Set Press M/m/</, to select the album to...
  • Page 27 ◆ Dolby Digital (DVDs only) Black Level Connect your TV to the COMPONENT VIDEO Audio Settings (Audio) OUT jacks (page 17). Selects the type of Dolby Digital signal. Selects the black level (setup level) for the video signals output from the LINE OUT jacks D-PCM Sets the recorder to output Select this when the recorder...
  • Page 28: Easy Setup

    Title List Rating Level : On: Level 8 (Adults) here. For details, see “If you have a Sony DVD Select this to run the Easy Setup program. Change Password Level 8 (Adults) Timer player or more than one Sony DVD recorder”...
  • Page 29: Additional Information

    , The data is not MPEG1 Audio Layer 3 data. , The set top box controller was incorrectly , The recorder cannot play audio tracks in Other Sony equipment responds to the remote. connected (page 12). , The same command mode is set for both the MP3PRO format.
  • Page 30: Guide To Parts And Controls

    , Restart the recorder. Press down "/1 on the On adjusting volume adhesive on it. recorder for more than ten seconds until “SONY Do not turn up the volume while listening to a The recorder does not detect a USB device DVD”...
  • Page 31 Remote Front panel display J CLEAR button (86) K X PAUSE button (49) L z REC (record) button (49) VCDVD RW VR HDMI USB M ?/1 (on/standby) switch (23) SYNCHRO N CH (channel) +/– button* (12, 49) PROGRESSIVE O INPUT button (49, 56, 69) P TIME/TEXT button (41) Q AUDIO button* (35)
  • Page 32 Cable box brand Code number Cable box brand Code number Cable box brand Code number Garrard 0153 Maestro 0812 Popular Mechanics 0400 Sony 1006 Gateway 0764 Magnavox 0797, 0027, 0032, 0334, Prelude 0770 Spectradyne 0769, 0058 0069 GC Electronics 0207, 0056, 0330, 0016,...
  • Page 33 Connecting Recording 47 “TV Type” 80 Index the cable box/satellite recordable discs 30 Easy Setup 88 NEXT 35 receiver 12 recording format 30 “Edit” 53 Number buttons 21 to your AV/amplifier recording mode 47 “Unfinalize” 67 Editing 57 Words in quotations appear in (receiver) 18 Recording mode 47 Unrecordable pictures 48...
  • Page 34: Disassembly And Reassembly

    RDR-GX360 2. DISASSEMBLY AND REASSEMBLY 2-1 CABINET AND PCB 2-1-1 Cabinet Top Removal 1 REMOVE 2 SCREWS 2 REMOVE 3 SCREWS Fig. 2-1 Cabinet Top Removal 2-1-2 Ass’y Front Panel Removal 1 RELEASE 3 HOOKS 2 RELEASE 3 HOOKS (Top View) (Bottom View) Fig.
  • Page 35: Chassis Removal

    2-1-3 Chassis Removal 1 CONNECTOR 3 REMOVE 1 SCREW 4 FFC CABLE 5 JACK BOARD 9 REMOVE 4 SCREWS qa REMOVE 1 SCREW 7 FFC CABLE qs FRONT BOARD qd REMOVE 4 SCREWS 0 DVD MAIN BOARD 6 CBF CABLE-MONO PLUG TO LED 8 REMOVE 2 SCREWS...
  • Page 36: Circuit Board Locations

    2-2 CIRCUIT BOARD LOCATIONS JACK BOARD DVD MAIN BOARD FRONT BOARD Fig. 2-4 Circuit Board Locations 2-3E...
  • Page 37: Block Diagram

    RDR-GX360 3. BLOCK DIAGRAM MIC2 MIC3 4MB FLASH EEPROM 32M DDR K8D3216UBM 24LC32 (256bit) (8bit) DVD-Rewritable Drive TS-P632D RF IC2 C DATA CLK STB OUT S3C80F9B DVD CODEC DVD V IN 6CH AMP MS9311 LA73054 SAA7138 VIDEO DIGITAL DATA (TIU656) LINE1 IN(REAR) (BTSC) AUDIO DIGITAL DATA (I...
  • Page 38: Pcb Diagrams

    RDR-GX360 4. PCB DIAGRAMS 4-1 DVD Main PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3 4-2 Jack PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-7 4-3 Function PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-11 4-4 Front PCB - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-13...
  • Page 39: Dvd Main Pcb

    4-1 DVD Main PCB COMPONENT SIDE...
  • Page 40 CONDUCTOR SIDE...
  • Page 41: Jack Pcb

    4-2 Jack PCB COMPONENT SIDE...
  • Page 42 CONDUCTOR SIDE 4-10...
  • Page 43: Function Pcb

    4-3 Function PCB COMPONENT SIDE CONDUCTOR SIDE 4-11 4-12...
  • Page 44: Front Pcb

    4-4 Front PCB COMPONENT SIDE CONDUCTOR SIDE 4-13 4-14E...
  • Page 45: Schematic Diagrams

    RDR-GX360 5. SCHEMATIC DIAGRAMS 5-1 S.M.P.S (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3 Note 5-2 Power (Jack PCB) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-5 For schematic Diagram...
  • Page 46: Jack Pcb)

    5-1 S.M.P.S. (Jack PCB)
  • Page 47: Power (Jack Pcb)

    5-2 Power (Jack PCB)
  • Page 48: Av Decoder (Dvd Main Pcb)

    5-3 AV Decoder (DVD Main PCB)
  • Page 49: Av Link Ts In_Out (Dvd Main Pcb)

    5-4 AV Link TS in_Out (DVD Main PCB) 5-10...
  • Page 50: Connector (Dvd Main Pcb)

    5-5 Connector (DVD Main PCB) 5-11 5-12...
  • Page 51: Ddr (Dvd Main Pcb)

    5-6 DDR (DVD Main PCB) 5-13 5-14...
  • Page 52: Hdmi Cec (Dvd Main Pcb)

    5-7 HDMI CEC (DVD Main PCB) 5-15 5-16...
  • Page 53: Hdmi Tda9984 (Dvd Main Pcb)

    5-8 HDMI TDA9984 (DVD Main PCB) 5-17 5-18...
  • Page 54: Host1 & Flash & Remulator I/F (Dvd Main Pcb)

    5-9 Host1 & Flash & Remulator I/F (DVD Main PCB) 5-19 5-20...
  • Page 55: Ieee1394_Dv (Dvd Main Pcb)

    5-10 IEEE1394_DV (DVD Main PCB) 5-21 5-22...
  • Page 56: Pcmio & Vio & Vdac (Dvd Main Pcb)

    5-11 PCMIO & VIO & VDAC (DVD Main PCB) 5-23 5-24...
  • Page 57: Usb (Dvd Main Pcb)

    5-12 USB (DVD Main PCB) 5-25 5-26...
  • Page 58: User Interface (Dvd Main Pcb)

    5-13 User Interface (DVD Main PCB) 5-27 5-28...
  • Page 59: Input_Output (Jack Pcb)

    5-14 Input_Output (Jack PCB) 5-29 5-30...
  • Page 60: Connector (Jack Pcb)

    5-15 Connector (Jack PCB) 5-31 5-32...
  • Page 61: Front Micom (Jack Pcb)

    5-16 Front Micom (Jack PCB) 5-33 5-34...
  • Page 62: Function Timer (Function Pcb)

    5-17 Function Timer (Function PCB) 5-35 5-36...
  • Page 63: Front Av (Front Pcb)

    5-18 Front AV (Front PCB) 5-37 5-38E...
  • Page 64: Troubleshooting

    RDR-GX360 6. TROUBLESHOOTING No Power Detected 1SF01 Change fuse ISD1~ISD4 Change short or opened parts SHORT and OPEN Check the Check the voltage Ucc= 10.3V 1SR10, 1SD7, 1SICO1, 1SZ02 Secondary D10 Des OK? Replace Diode (D1S35, D1S32, D1S33A, D1S33, D1S30, D1S34,D1S40) Check feedback IC 1S01...
  • Page 65 Key Operation or Remote Control Error Voltage on the Check power of front connector Function Display Ass’y? (CN702(PIN11)) XT60 1 14.318MHz Check the circuit around the clock oscillation Check the circuit around Check 6MICO1 reset the circuit around 6MICO1 reset? Check the circuit around the swith.
  • Page 66 Disc loading error Are Main and Check the power deck power OK? (5v, 12v) Is the 40pin Reinsert FFC cable correctly FFC cable(betweenmain & deck) inserted correctly? Is the wavefrom Change the Main board of MIC3pin26 normal? (Main PCB) Change the deck...
  • Page 67 No Analog Audio Output Check Audio input signal 1) Line 1 Audio input : AVIC 1 Pin # 122, 123 Check VCC of AVIC 1 Check AVIC 1 (P~#5 : 3.3V 1P~#3 : 1.8V) 2) Line 2 Audio input : (Pin # 109, 110) AVIC 1 Pin # 125, 126 and peripheral parts of Clock oscillation...
  • Page 68 No digital audio out Check the digital Refer to user manual audio setting Proper Check VCC and peripheral signal input on part of MIC1 D3 0P, MIC 1 Replace 8AL 13 Proper signal on 8AL 13 Check peripheral parts of coaxial output terminal...
  • Page 69 No audio on line input mode or recorded disc playback Check audio input signal Check peripheral parts of 1) Line 1 Audio input: AVIC 1 Pin # 122, 123 8AJK2, JK801 2) Line 2 Audio input: AVIC 1 Pin # 125, 126 1.
  • Page 70 CVBS output error Check peripheral Check 8AC18 parts of Clock oscillation (AXTAL) Check VCC and peripheral Check 8AIC 1 (Pin # 14) parts of 8AIC1 Check peripheral parts of and 8YQ30...
  • Page 71 Component output error Check Check VCC of MIC 1 and peripheral 8AC9,8AC 10, parts of Clock oscillation 8AC11 AXTAL Check VCC and peripheral parts of Check 8AIC 1 8AIC 1 (Pin # 11,12,13) Check peripheral parts of 8AJK 2...
  • Page 72 Line1 CVBS Video Input Error Check JK801 Check peripheral parts of JK80 1 (Video input signal) Check AVIC 1 1. Check between AVIC 1 and (Pin # 8) JK801 2. Check VCC of AVIC 1 and Check AVIC 1 peripheral (Pin #75,76,79~84) parts of Clock oscillation (Pin #53, 54) of AVIC 1...
  • Page 73 Line2 CVBS Video Input Error Check FrontJACK Check peripheral parts of Front Jack (SVideo input signal) and cable and connector of 7FCN2 and 7FCN2(Pin #13) Check AVIC 1 1. Check VCC and peripheral parts of (Pin # 10) AVIC 1 1.
  • Page 74 DV (Digital Video) Input Error Check DV JACK Check peripheral parts of DV JACK (FAJK1 and 7FCN2 and cable and connector of 7FCN2 (Pin # 1, 2, 3, 4)) Check TIC 1 Check peripheral parts of 7FCN2 and (Pin #34~37) TIC 1.
  • Page 75 Remocon Error RM701 Check the power (Pin 2) line (Pin 2),(Oon Front PCB) or change RM70 1. signal is OK? (6MICO1(Pin28)) signal Check the signal line or around is OK?(Jack PCB) elements Change 6MICO1 around elements 6-12...
  • Page 76 HDMI Output Error Check the HDMI Video Output Error connector of HDMI cable with HDMI jack? Check the MIC 1(pin Y 12) The reset peripheral singnal is normal (5V) at HIC 1 circuit. (pin42)? The VO_CLK Check the MIC 1(pin P 2) periph- signal is normal at HIC1 eral (Pin66)?
  • Page 77 Line1 S-Video Input Error Check 8YJK1 Check peripheral parts of 8YJK1 (Video input signal) Check AVIC1 1.Check between AVIC1 (Pin #9,16) and 8YJK1 2.Check VCC of AVIC1 and Check AVIC1 peripheral parts of (Pin #75,76,79~84) Clock oscillation (Pin #53,54)of AVIC1 1.
  • Page 78 USB mode Error Check USJK1 Check between USJK1 and USCN1 (USB input jack) Check UCON Check between AVIC1 and 8YJK1 (Pin #2,3,4) Check MIC1 Check VCC of UIC1 (Pin #V7,AB7,AB8) Check VCC of MIC1 and peripheral parts of Clock oscillation(12MHz UXAL) 6-15E...
  • Page 79: Repair Parts List

    RDR-GX360 7. REPAIR PARTS LIST 7-1 Exploded Views ---------------------------------------------------------------------- 7-2 7-2 Electrical Parts List ------------------------------------------------------------------ 7-3...
  • Page 80 9-885-101-41 SPRING ETC-DOOR TRAY 9-885-120-57 ASSY PWB-MAIN 9-885-090-95 CBF-POWER CORD P005 9-885-120-55 ASSY PWB-FRONT AV SUB 9-885-120-45 CABLE-FLAT; 85mm, 14P, 1.25mm A001 9-885-120-61 REMOCON ASSY:RDR-GX360 (RMT-D254A) C001 9-885-120-42 ASSY-PANEL FRONT C015 9-885-120-41 CABINET TOP W263 9-885-069-84 SCREW-TAPTITE BLK SWCH101 W275...
  • Page 81: Electrical Parts List

    FRONT AV SUB FTIMER VFD MAIN 7-2 ELECTRICAL PARTS LIST • Items marked “*” are not stocked since they are NOTE: When indicating parts by reference number, • Due to standardization, replacements in the seldom required for routine service. Some delay please include the board name.
  • Page 82 MAIN JACK Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-400-316-11 CORE-FERRITE BEAD 220ohm < IC/PHOTO COUPLER > 1-400-316-11 CORE-FERRITE BEAD 220ohm 8AIC1 9-885-120-50 IC MM1692XVBE (VIDEO AMP) < VIBRATOR > 8AIC4 9-885-070-53 IC 4560 (OP AMP) 6CIC01 9-885-120-54 IC S3C80J9X12-SN99 (MICOM) AVXAL 9-885-070-70 CRYSTAL-SMD (24.576MHz)
  • Page 83 KSC1623-L ACCESSORIES ************ < CAPACITOR > 3-296-710-11 MANUAL, INSTRUCTION (ENGLISH) 6BC01 1-165-644-11 CONDENSER 0.1F 9-885-120-61 REMOCON ASSY:RDR-GX360 (RMT-D254A) 1C1S39 1-165-999-11 CONDENSER FILM 0.1uF 0 1SC02 1-100-358-11 CONDENSER CERAMIC DISC 100PF 0 1SC03 1-100-358-11 CONDENSER CERAMIC DISC 100PF 1SC07 1-165-990-11 CONDENSER...
  • Page 84 RDR-GX360 Sony Corporation 2008C0500-1 Home Electronics Network Company © 2008. 3 — 111 — 9-883-984-11 Published by Quality Assurance Dept.
  • Page 85 RDR-GX360 REVISION HISTORY Ver. Date Description of Revision 2008.03...

This manual is also suitable for:

Rdr-gx360

Table of Contents