Package Contents DCS-5222L HD Pan & Tilt Day/Night Network Camera CAT5 Ethernet Cable Power Adapter Audio In/Out Cable Mounting Kit If any of the above items are missing, please contact your reseller. Minimum Requirements Mobile Device (to use mydlink Lite app) •...
Product Overview Front IR LEDs Light Sensor Camera Lens Focus Ring Microphone PIR Sensor Antenna microSD Card Speaker Slot Power LED WPS Status LED Back WPS Button Audio In/Out Reset Button Power Connector I/O Connector Ethernet Port...
Setting Up Your Camera Download the free mydlink Lite app on your smartphone or tablet by scanning the QR code below, or by searching for mydlink Lite in the app store for your device. System Requirements: Refer to the mydlink Lite app page on Apple App Store, Google Play or Windows Phone Store. Launch the mydlink Lite app, then create a new account or log in to your existing account.
Mount the Camera Please refer to the steps below to assist you with mounting the camera. We suggest that you configure the camera before mounting. 1. Place the arm mount where you want to position the camera and use a pencil to mark the holes. Make sure you allow adequate space for the necessary cables to be routed.
Page 6
This eight-digit number identifies your device, and is required to add your device to your mydlink account. 2. What can I do if my DCS-5222L is not working correctly? • Reset the camera (see next step) and run the setup steps starting on page 4 again.