Introduction Table of Contents Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Note • Before operating the TV, please read “Safety Information” (page 2). • Instructions about “Installing the TV to the Wall” are included within this TV’s instructions manual.
Page 3
• Places that are hot, humid, or excessively dusty; where insects damage and/or injuries: Use only Sony supplied AC power cords (mains lead), not those may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc.). The TV set shall not be of other brands.
Page 4
• Be sure to use the supplied screws and immediately if any of the following problems occur. attachment parts properly following the Ask your dealer or Sony service centre to have it checked by instructions given in this instruction manual. qualified service personnel.
Wireless Function of the unit fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take • Do not operate this unit near medical equipment (pacemaker, regular breaks while watching 3D video images or playing etc.), as malfunction of the medical equipment may result.
Parts and Controls Controls and Indicators Remote Control sensor* / (Input select) Light sensor* / Illumination LED / Display and select the input source. 3D Sync Transmitter* The Illumination LED lights up or blinks * Do not place anything near the sensor. according to the status of the TV.
Inputs and Outputs VIDEO IN, HDMI IN 2/3/4 / COMPONENT IN • For a composite connection: • If the device has a DVI jack (socket), Use VIDEO IN, and (L/R) of / connect it to HDMI IN 3 through a DVI - COMPONENT IN*.
Using Remote Control Remote Control Parts Description / Number buttons (Input select/Text hold) In TV mode: Display and select the input (Twin picture/PIP)* source. Display two pictures simultaneously. In Text mode: Hold the current page. (Text) (TV standby) Display text information.
Page 9
Internet. If you do not have a GUIDE/ network connection, you will be able to download the software from the Sony support website using Display the digital programme guide. your PC. For details on how to upgrade, please visit the Sony support website.
To connect with AV composite cables Connecting the TV Note • When connecting the cable to the Cable/Antenna, input finger tighten only, over-tightening the connection can damage the TV. To connect with an HDMI cable < 21 mm < 12 mm To VIDEO OUT To HDMI OUT To connect with component cables...
Page 11
Picture Quality • AV composite cable • Component cable • HDMI cable • Antenna (aerial) cable Standard definition (SD) videos have picture signals with a High definition (HD) videos have picture signals vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines. with a vertical resolution of 720 or 1,080 lines.
To Sony Dealers and Contractors Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or improper installation.
Page 13
Installing the Brackets on the wall Prepare necessary items. Wall-Mount Bracket accessories Paper Template Wall-Mount Base (1) Stand Protector (2) Screw (+PSW M8 × 12) Spacers (2) Stand Screws for Wall-Mount Base (8 mm in diameter, not supplied) Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that of the TV.
Page 14
Unit: mm Display dimensions Screen centre dimension Length for mounting Model Name KDL- 50W800C 1,116 43W800C Note • Figures in the table may differ slightly depending on the installation. Make a mark on the Paper Template A that indicates the centre of the screen for your TV. Scale on Paper Template A Mark for KDL-50W800C...
Page 15
Preparing for the installation of the TV Insert the pin (on the Stand Protector C) into the hole on the Stand B, then fold up the Stand Protector C. Confirm the Stand Protector C is firmly latched to the Stand B. Attach the Stand B to the TV using the supplied screws D.
Page 16
Installing the TV on the wall Make sure to connect and bundle the cables before installing the TV on the wall. Install the TV on the wall. Then, confirm the Stand Protector C is firmly latched into the Wall-Mount Base B and the Spacers E touch the wall. Wall Wall Dimensions of the hole positions on the wall...
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Page 18
SU-WL450 Attach Wall-Mount Attachment (supplied with the TV) to the rear of the TV (to make it parallel with the wall). 1.5 N∙m {15 kgf∙cm} Soft cloth Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. •...
Page 19
Unit: mm Screen Display dimensions centre Length for mounting dimension Model Name KDL- Standard Slim mounting mounting 50W800C 1,116 43W800C Note • Figures in the table may differ slightly depending on the installation. • When your TV is installed on the wall, the upper side of the TV slightly leans forward. Attach the Attachment parts for Wall-Mount Bracket.
Page 20
Screw (+PSW 6 x 20) Screw (+PSW 6 x 20) Pulley Spacer (20mm) Belt Soft cloth Connect necessary cables to the TV. Note • You cannot access to any terminal after installing the TV to the wall. Install the TV to the Base.
TV. If the problem persists, contact your dealer or Rear of TV Sony service centre with the number of times the illumination LED flashes red (interval time is three seconds). Disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre.
Cannot connect to a wireless router by WPS (Wi-Fi Protected Setup). Specifications If you use WEP security, select [Easy] t [Wi-Fi] t [Connect by scan list]. Then, select the network System name (SSID) you want to connect. Panel system Cannot find the required network name in LCD (Liquid Crystal Display) Panel, LED Backlight network setup.
Active 3D Glasses: TDG-BT500A Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “BRAVIA” and are trademarks of Sony Corporation. • Gracenote, Gracenote eyeQ, Gracenote Operating temperature VideoID, Gracenote Video Explore, the 0 ºC – 40 ºC Gracenote logo and logotype, and the Operating humidity “Powered by Gracenote”...
Page 27
熱器或加熱裝置通風孔的地方。電視機在這種環境下可能會過熱而 導致外殼變形及 / 或電視機故障。 AC 電源線 為了避免火災、觸電或損壞及 / 或受傷等危險,請遵照下列指示來處 情況條件: 理 AC 電源線和插座 : 請僅使用 Sony 隨附的 AC 電源線,不要使用其它品牌的電源線。 • 手濕,機殼拆除或採用非製造商所建議的配件時切勿使用本電視 將插頭完全插入 AC 電源插座。 機。出現雷電時請將電視機電源線從 AC 電源插座和天線拔下。 僅可在 220-240 V AC 電源上使用電視機。 • 不要把電視機安裝在延伸出開放的空間。 連接訊號線時,為了安全起見請務必拔下 AC 電源線,以免被訊號線...
輸入及輸出 VIDEO IN, HDMI IN 2/3/4 / COMPONENT IN • 如為複合連接︰ • 如果裝置擁有 DVI 插座,請透過 DVI - 使用 VIDEO IN,以及 / COMPONENT HDMI 轉接器接口 (無附帶)將其連接至 IN 的 (L/R) 。 HDMI IN 3,並將裝置的音訊輸出插孔 (插 • 如為組件連接︰ 座)連接至 HDMI 3 AUDIO IN。 及...