hit counter script
Olympus C-200 ZOOM Reference Manual
  1. Manuals
  2. Brands
  3. Olympus Manuals
  4. Digital Camera
  5. Camedia D-510 Zoom
  6. Reference manual

Olympus C-200 ZOOM Reference Manual

Olympus digital camera reference manual c-200 zoom, d-510 zoom
Hide thumbs Also See for C-200 ZOOM:
Table of Contents

Advertisement

Quick Links

See also: Basic Manual

Digital Camera

C-200 ZOOM
D-510 ZOOM
Reference Manual
• Before you use this camera, read this manual and then store it in a
safe location where you can find it for future use.
• We recommend that you spend some time taking test shots and
experimenting with all of the features before you take important
pictures.

Advertisement

Table of Contents
loading

Related Manuals for Olympus C-200 ZOOM

Summary of Contents for Olympus C-200 ZOOM

  • Page 1: Digital Camera

    Digital Camera C-200 ZOOM D-510 ZOOM Reference Manual • Before you use this camera, read this manual and then store it in a safe location where you can find it for future use. • We recommend that you spend some time taking test shots and experimenting with all of the features before you take important pictures.

  • Page 2: Legal And Other Notices

    © Copyright 2001. Olympus Optical Co., Ltd. All rights reserved. Legal and other notices • The contents of this document are subject to change without prior notice. • Although the contents of this document have been carefully checked to avoid errors, some may still occur. If you have a question about any point, or you find mistakes or omissions, please contact us.

  • Page 3: Declaration Of Conformity

    For Customers in USA Declaration of Conformity Model Number: D-510 ZOOM Trade Name: OLYMPUS Responsible party: Olympus America Inc. Address: 2 Corporate Center Drive, Melville, New York 11747-3157 U.S.A. Telephone number: 631-844-5000 Tested to comply with FCC standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules.

  • Page 4: Table Of Contents

    Contents Features of the C-200 ZOOM/D-510 ZOOM ... VI Using this Manual ... VII Chapter 1 Getting Started Names of Parts ... 2 Attaching the Strap ... 6 Inserting the Batteries ... 7 Inserting the SmartMedia Card ... 10 Using the Card ... 11 Card Basics ...
  • Page 5 Chapter 4 Taking Better Pictures Points to Remember ... 50 Viewfinder Discrepancies Depending on Distance ... 50 Subjects Difficult to Get in Focus ... 50 When Not Able to Focus on a Subject While Shooting ... 52 Determine the Position of the Subject After Focusing ... 52 Fixing a Far-Distance Focus ...
  • Page 6 Printing Using DPOF-Compatible Printers or Photo Labs (Print Reserve) ... 109 Rotating Images During Playback (Rotated Playback) ... 112 Displaying Image Information on the Monitor (Image Information Display) ... 113 Changing the Color or Size of Images (Edit) ... 114 To Erase All Images (All Erase Frames) ...

  • Page 8: Features Of The C-200 Zoom/D-510 Zoom

    /D-510 ZOOM • With its high-resolution CCD (total 2,110,000 pixels) and high- performance lens, the Olympus CAMEDIA digital camera produces pictures of extremely high image quality. • The 3x optical zoom lens and the 3x digital zoom function combine to offer an impressive 9x maximum zoom.

  • Page 9: Using This Manual

    Using this Manual This manual is divided into seven chapters and one appendix which cover the main unit (hereafter called “the camera”). Chapter 1 Getting Started Details confirming the names of all the parts of the camera and preparing the camera to be used for the first time are all explained in this chapter.

  • Page 10: Additional Information

    Appendix You will also find a troubleshooting guide and explanations of the key technical specifications. Additional information The following may appear at the bottom of each page. CAUTION: These sections contain important precautions. Be sure to read. HELP: These sections include information and helpful hints on how to handle problems that may arise during operation.

  • Page 11: Chapter 1 Getting Started

    Getting Started This chapter describes the various parts of the camera and their names, the accessories for the camera, and how to prepare the camera to be used for the first time. Please be sure to read this chapter, starting on the following page, before using the camera for the first time.

  • Page 12: Names Of Parts

    Names of Parts Camera Shutter button (p.25) Selftimer lamp (p.59) Zoom lever (p.31) Lens barrier (p.18) Card cover (p.10) Card slot Flash (p.30) Lens Video OUT jack (p.42) DC-IN jack (p.16) USB connector (p.120) Connector cover...
  • Page 13 Camera (continued) Arrow pad (p.12) Diopter adjustment dial (p.15) Viewfinder (p.50) Monitor (p.28) Battery compartment lock (p.7) Battery compartment cover (bottom) (p.7) Viewfinder Macro button (p.55)/ Protect button (p.44) Flash mode button (p.64) Selftimer button (p.59)/ Erase button (p.45) Monitor button (p.12) Tripod socket (bottom) AF target mark (p.25, p.52)
  • Page 14 Monitor Shooting mode display Battery check (p.20) Memory gauge Number of storable (p.28) pictures (p.21) Playback mode display Battery check Print reserve (p.109) (p.20) 2001-01-23 AF target mark (p.25, p.52) +1.5 Exposure compensation (p.76) Record mode (p.87) Flash mode (p.64) Spot metering (p.74) Macro (p.55) / Quick focus (p.53) Sequential shooting (p.57) /...
  • Page 15 Names of Parts (continued) Playback mode display (with image information display on) 1600x1200 Resolution (p.87) White balance (p.85) ISO100 ISO sensitivity (p.78) FILE:100-0123 File number (p.95) 2001-01-23...

  • Page 16: Attaching The Strap

    CAUTION • Attach the strap exactly as shown in the diagram. If the strap is attached incorrectly the camera may come loose and fall off. In this case, Olympus will not be responsible for any damage. Attach the strap to the camera as shown in the diagram.

  • Page 17: Inserting The Batteries

    Inserting the Batteries This camera uses four AA (R6) alkaline, NiMH, lithium or NiCd batteries. It can also take two CR-V3 lithium battery packs. Do not use zinc-carbon (manganese) batteries. Do not mix different types of batteries or insert the batteries facing in the wrong direction.
  • Page 18 CAUTION • The CR-V3 lithium battery packs are not rechargeable. • Make sure that the camera power is off before inserting the batteries. • Alkaline batteries deliver markedly inferior performance, especially in cold weather. For this reason, we highly recommend using lithium battery packs or rechargeable NiMH batteries.
  • Page 19 WARNING Batteries with any part of the outer seal (electrical insulation sheath) peeling off, or any battery split along the seam, can leak, generate heat, or explode. Never use damaged batteries in the camera. Store-bought batteries occasionally may be defective, with all or part of the magnetic insulation sheath peeling off.

  • Page 20: Inserting The Smartmedia Card

    When using non-Olympus brand cards Use only 3V (3.3 V) cards. 5V cards can not be used. Non-Olympus brand cards or cards formatted by computers or other devices may not be recognized by the camera. Also, the time required for writing to the card could become longer, or the number of possible shots could be reduced.

  • Page 21: Using The Card

    PC. Compatible SmartMedia cards • Provided 8 MB standard card. • Optional Olympus 4 MB/8 MB/16 MB/ 32 MB/64 MB/128 MB cards • Market-available 3V (3.3V) card 4 MB/8 MB/16 MB/32 MB/64 MB/ 128 MB cards * 2 MB cards cannot be used.

  • Page 22: Setting The Date And Time

    Setting the Date and Time Time and date information for each picture are recorded at the same time the picture is taken. Therefore, before taking pictures, be sure to confirm that the date and time settings are correct. Monitor (Playback menu) PLAY RESET CARD...
  • Page 23 Monitor (Date setting screen) M – D – Y 0 1 – 2 3 – 2 0 0 1 1 2 : 0 0 CANCEL SET OK Monitor (Date setting screen) M – D – Y – 2 3 – 2 0 0 1 1 2 : 0 0 CANCEL Press the arrow pad...
  • Page 24 NOTE • Until you change it, the date setting will remain current even when the power is turned off. • It is possible to set the time even when the lens barrier is open and the camera is in shooting mode (p.70). Setting the Date and Time (continued)

  • Page 25: Adjusting The Viewfinder

    Adjusting the Viewfinder To make the camera easier to use, adjust the viewfinder to match the eyesight (visual acuity) of the person who will be using the camera. Diopter adjustment dial Viewfinder AF target mark Slide the lens barrier open until it clicks.

  • Page 26: Using The Ac Adapter (Sold Separately)

    AC adapter or camera, please contact your Olympus dealer or an authorized Olympus service center for assistance. • Do not use any adapter other than the Olympus adapter. Using a different adapter can damage the camera or the power source, or cause other malfunctions.

  • Page 27: Chapter 2 Learning The Basics

    Learning the Basics The fastest way to learn to use the camera is simply to start taking pictures with it. This chapter explains turning the camera on, taking still shots, checking how they came out, and turning the camera off. Please have the camera in hand and practice the operations described as you read the following chapter.

  • Page 28: Turning The Power On

    Turning the Power On Slide the lens barrier open. Monitor Battery check Record mode Standby mode If the lens barrier is left open and nothing is operated after three minutes, the camera goes into standby mode. In this energy saving mode, even if the monitor is illuminated, it will automatically go off.

  • Page 29: Checking The Monitor

    Checking the Monitor Is the Card Inserted? If you forget to insert the card, or if there is any other problem with the card, the monitor will display a message. Read the message and correct the problem. Monitor Monitor (Card Setup) CARD SETUP When the “NO CARD”...

  • Page 30: Checking The Batteries

    Checking the Batteries When the monitor is turned on, it displays the estimated remaining battery life. After opening the lens barrier and turning on the power (shooting mode), the monitor will automatically illuminate, display information, and then go off after a short time. lights (and turns off automatically).

  • Page 31: Does The Card Have Enough Room For More Pictures

    Does the Card Have Enough Room for More Pictures? When the power is turned on with the camera in shooting mode, the monitor displays a remaining picture count. When the monitor display has gone out, press the monitor button ( The number of storable pictures Approximate storable still pictures Record mode...
  • Page 32 HELP • The number of storable stills and the movie length may vary depending on the subject being photographed. • In some cases the number of storable pictures counter may not decrease every time a picture is taken, nor increase when a frame is erased. Checking the Monitor (continued)

  • Page 33: Holding The Camera

    Holding the Camera Proper camera technique Hold the camera firmly with both hands, keeping your elbows at your sides. When holding the camera vertically, make sure the flash is on top. Horizontal grip Vertical grip Incorrect! Keep your fingers and the strap away from the lens and flash. NOTE •...

  • Page 34: Shooting Technique Depends On Distance To The Subject

    Shooting Technique Depends on Distance to the Subject Deciding whether to use the viewfinder or the monitor display when shooting depends on the distance between you and your subject. Determine the approximate distance before taking the picture. For normal and long-range photography (from approx.

  • Page 35: Taking Still Pictures

    Taking Still Pictures Taking Pictures Using the Viewfinder Viewfinder Shutter button Orange lamp Green lamp ➜ Go on to “Taking Pictures” on the following page. Compose the picture inside the viewfinder. AF target mark Press the shutter button halfway down until the green lamp next to the viewfinder lights up (half-press).

  • Page 36: Taking Pictures

    Taking Pictures Shutter button CAUTION • Never remove the batteries or card, or disconnect the AC adapter while the green lamp is blinking. This could damage the pictures you have already taken, as well as the one currently being written to the card. Having half-pressed the shutter button, press it further all the way down (full-press).
  • Page 37 HELP • The area of the actual picture will be slightly larger than the shot appears through the viewfinder. • If you switch the beep function off (p.99), the camera will not beep after taking a picture. In this case you must watch the green lamp. If the lamp blinks, the picture was taken successfully.

  • Page 38: Taking Pictures Using The Monitor

    Taking Pictures Using the Monitor Monitor Memory gauge CAUTION • Never remove the batteries or card, or disconnect the AC adapter while the memory gauge is on. This could damage the pictures you have already taken, as well as the one currently being written to the card. With the lens barrier open, press the monitor button ( •...
  • Page 39 HELP • Pictures taken using the monitor take more time to write to the card than those taken when using the optical viewfinder. • A subject taken at an angle may appear grainy on the monitor, but this will not affect the quality of the actual picture. •...

  • Page 40: Using The Flash To Shoot In Dim Light

    Using the Flash to Shoot in Dim Light If lighting conditions are dim enough to require a flash, the orange and green lamps next to the viewfinder will light when the shutter button is pressed halfway down. Pressing the shutter at this time will cause the picture to be taken with the flash.

  • Page 41: Enlarging Your Shots (Optical Zoom)

    Enlarging Your Shots Use telephoto (T) to zoom in on a subject so it appears larger. Use wide angle (W) to capture a wider area. Viewfinder When using the monitor When the zoom lever is activated, the zoom status will be displayed on the zoom bar.

  • Page 42: Playing Back Your Still Pictures

    Playing Back Your Still Pictures You can play back any of the pictures you have taken. Shutter button With the camera in shooting mode (the lens barrier open), quickly press the monitor button ( ) twice. • The camera switches to playback mode and the monitor displays the most recent picture taken.
  • Page 43 HELP • Pressing the buttons on the arrow pad for 1 second or more causes different functions to activate (p. 44, 45).

  • Page 44: Turning The Power Off

    Turning the Power Off CAUTION • Do not press firmly on the lens when closing the lens barrier. It could cause scratches or damage. NOTE • The pictures you have taken are stored on the SmartMedia card. Stored images will not be lost when the power is turned off or when the batteries are replaced.

  • Page 45: Chapter 3 Playing Images Back

    Playing Images Back The previous chapter explained how to take still pictures and check them immediately. Chapter 3 explains how to check all of the pictures you have taken together once you are finished shooting, as well functions like connecting the camera to your television set for convenient playback.

  • Page 46: Getting Started

    Getting Started Turning the Power On in Playback Mode If the camera is left untouched for three minutes when using the batteries, it automatically turns off. It is strongly recommended, however, that you switch power off promptly when you are finished using the camera.

  • Page 47: Turning The Power Off In Playback Mode

    Turning the Power Off in Playback Mode Press the monitor button ( • The monitor display shuts down and the power turns off.

  • Page 48: Displaying Images Frame By Frame

    Displaying Images Frame by Frame To display one frame at a time on the monitor, follow the same steps described in “Playing Back Your Still Pictures” in Chapter 2 (p.32). Monitor (With image information display on (p.113)) Battery check Print reserve 1600x1200 FILE:100-0123 2001-01-23...

  • Page 49: Displaying All Frames (Index-Display Setting)

    Displaying All Frames (Index-Display Setting) Multiple images can be displayed on the monitor at once, useful when search through stored images for a specific picture. Monitor With the lens barrier closed, push the monitor button ( • The power turns on in playback mode and the monitor displays the last image taken.
  • Page 50 HELP • Pressing the buttons on the arrow pad for 1 second or more causes different functions to activate (p. 44, 45). Displaying All Frames (continued) Press the arrow pad to select a frame displayed on-screen. : To select the frame to the left.

  • Page 51: Checking The Focus By Enlarging A Selected Picture (Displaying Close-Ups)

    Checking the Focus by Enlarging a Selected Picture (Displaying Close-ups) This function enlarges a selected image. However, if the image is marked with the movie mark ( enlarged for display. Monitor With the lens barrier closed, press the monitor button ( •...

  • Page 52: Connecting To A Television Set

    Connecting to a Television Set Images stored on the camera can be displayed on a larger screen by connecting the camera to a television using the included video cable. Before connecting, make sure the camera and television power are off, and that the camera lens barrier is closed.
  • Page 53 HELP • The camera monitor does not illuminate when the video cable is connected. • Depending on how your television is adjusted, the picture may appear off- center on the television screen. • Your television may produce a black frame around the picture, which may be undesirable as it also appears if the image is printed using a conventional video printer.

  • Page 54: To Avoid Accidentally Erasing Pictures You Want To Keep (Image Protection)

    To Avoid Accidentally Erasing Pictures You Want to Keep (Image Protection) Use the protection feature to safeguard images you want to keep. Protected pictures will not be erased by One-Frame Erase (p.45) or by All Frames Erase (p.115). The protection setting remains even after the power is turned off. Write-protect mark Monitor CAUTION...

  • Page 55: One-Frame Erase

    One-Frame Erase Erasing unneeded pictures frees storage space for further picture- taking. Storage space increases by an amount equivalent to that taken by the pictures that have been erased. One-frame erase cannot be used when a picture is protected, or a write- protect seal is on the card.
  • Page 56 CAUTION • Never open the card cover, eject the card, remove the batteries, or disconnect the AC adapter while erasing pictures. Doing so may destroy the image data on the card. HELP • It may take longer to erase when the “print reserve” function (p.109) has been activated on the card.

  • Page 57: Possible Printing Methods

    Using Dedicated Printers (Sold Separately) The P-400, P-200 and P-330N(E) Olympus printers are designed specifically for Olympus digital cameras. Just load the card into the printer, then use the printer’s buttons to select and manage printing. Refer to the individual printer’s user’s manual for more detailed information.
  • Page 58 CAUTION • The P-400/P-330N(E)/P-330 cannot be connected to the camera’s USB connector. • While it is possible to print from the camera through the video OUT jack, printer performance will be suboptimal. HELP • This camera cannot change automatic print information recorded by other DPOF-compatible devices.

  • Page 59: Chapter 4 Taking Better Pictures

    Taking Better Pictures The arrow pad allows easy setting of focus, flash type, and a number of other convenient functions. This chapter explains functions that will be useful to remember in helping you to take better pictures. Once you’ve taken a few pictures and familiarized yourself with the contents of Chapter 2, browse the following sections to find more information that will help...

  • Page 60: Points To Remember

    Points to Remember Viewfinder Discrepancies Depending on Distance The image as seen through the viewfinder does not always match up with the final picture depending on the distance between the subject and the camera. When shooting subjects 1.5m (59″) to ∞, the viewfinder picture frame shows the area that can be shot.
  • Page 61 In these situations, first focus your camera on an object that is the same distance from the camera as your subject, then aim back at the subject to take the picture (focus lock: p.52). Alternatively, set the focus on ∞ (quick focus: p.53) before taking the shot.

  • Page 62: When Not Able To Focus On A Subject While Shooting

    When Not Able to Focus on a Subject While Shooting Determine the Position of the Subject After Focusing If your main subject is not centered inside the AF target mark, use the focus lock feature explained below: Viewfinder AF target mark CAUTION •...

  • Page 63: Fixing A Far-Distance Focus

    Fixing a Far-Distance Focus The lens can be set for far-distance focus (∞). Use this function when it is difficult to focus on a subject in the background. Quick focus working range 1.3m 0.85m 1.8m (4.3ft) (2.8ft) (5.9ft) 2 3 4 Monitor Beyond flash working range (13ft)
  • Page 64 When Not Able to Focus on a Subject While Shooting (continued) To cancel quick focus on the arrow pad several times until the ∞ mark or macro mark Press ) disappears. Quick focus can also be cancelled simply by turning the camera off To retain the quick focus even after the power is turned off, set the clear settings function in the shooting menu to OFF (p.98).

  • Page 65: Taking Close-Up Pictures (Macro Mode)

    Taking Close-up Pictures Use the macro function to shoot subjects at very close distances.When using the macro function, maintain a distance of about 20 and 80cm (8″ and 31″). Pictures taken outside this range are likely to be out of focus or poorly exposed.

  • Page 66: Turning The Camera Off

    To cancel the macro mode on the arrow pad several times until the macro mark or ∞ mark Press disappears. The macro mode can also be cancelled simply by turning the camera off To make the camera retain the macro mode even after the power is turned off, set the clear settings function in the shooting menu to OFF (p.98).

  • Page 67: Taking Sequential Shots

    Taking Sequential Shots Using the sequence function, the camera will continue taking a series of up to 45 still shots (When the record mode is set to SQ) for as long as the shutter button remains pressed. This function is useful for shooting fast-moving objects, since among the many shots there are likely to be some that show the subject or action as you wish.
  • Page 68 To cancel sequential shooting To cancel sequential shooting, press until the sequence mark, selftimer mark ( disappear. Sequential shooting can also be cancelled simply by turning the camera off To make the camera retain sequential shooting even after the power is turned off, set the clear settings function in the shooting menu to OFF (p.98).

  • Page 69: Using The Selftimer

    Using the Selftimer For when the photographer wants to be in the picture. Using a tripod is highly recommended. Selftimer lamp 3 4 5 Monitor Selftimer mark Secure the camera on the tripod. Open the lens barrier. • The camera turns on in shooting mode.

  • Page 70: Taking Movie Pictures

    Taking Movie Pictures In addition to still pictures, this camera has the ability to take movie (15 frames/sec.). Take advantage of this feature to capture your subjects in motion. Monitor (When the movie shooting automatically stops) Remaining second count Memory gauge Open the lens barrier.
  • Page 71 Viewfinder Green lamp Memory gauge The gauge level rises as you continue to shoot. If you continue shooting for the maximum continuous movie length (see chart on the next page), the level reaches the top and the camera stops shooting. Remaining second count Indicates the time remaining before the camera must stop...
  • Page 72 Movie shooting will be canceled when the power is turned off (C-200 ZOOM only) The continueus movie length may be different for C-200 ZOOM models sold in the PAL color system regions if movie pictures are shot with the video cable connected.
  • Page 73 To cancel movie shooting To cancel movie shooting, press the movie mark, sequence mark ( disappear. Movie shooting will be canceled when the power is turned off To make the camera retain movie shooting even after the power is turned off, set the clear settings function in the shooting menu to OFF (p.98).

  • Page 74: Using The Flash

    Using the Flash Switching Between Flash Modes Select the appropriate flash mode according to the shooting conditions. Note that the flash will not operate when shooting sequential shots (p.57), shooting movie pictures (p.60) and taking panoramic shots (p.82). Also, the working range of the flash changes when you operate the zoom lever (p.30).
  • Page 75 Flash mode ➔ Auto-flash (no Mark) Red-eye reduction Fill-in flash No flash Night scenes Night scenes + Red-eye reduction The flash function will automatically return to auto-flash mode when the power is turned off. To make the camera retain the selected flash mode even after the power is turned off, set the clear settings function in the shooting menu to OFF (p.98).

  • Page 76: Auto-Flash

    Auto-Flash In auto-flash mode, the flash will automatically fire in lowlight and backlit conditions. Viewfinder To fire the flash in a backlit shot, position the subject inside the AF target mark. Red-eye Reduction When shooting people, eyes may appear red. Use the red-eye reduction flash mode to compensate for this phenomenon.

  • Page 77: Fill-In Flash

    Fill-in Flash Forces the flash to fire on every shot. Using the fill-in flash mode, the flash fires regardless of available light. This feature can be used to light up a subject’s face, when shaded by a tree for example, or to correct uneven lighting conditions caused by backlighting, fluorescent lighting, etc.

  • Page 78: Night Scenes

    Night Scenes For taking pictures at night, using flash and slow shutter speeds. This setting fires the flash to expose the foreground while the shutter stays open to expose the details in the background. Night Scenes + Red-eye Reduction The combination of these two modes works best for taking pictures of people at night.

  • Page 79: Chapter 5 Advanced Shooting Techniques

    Advanced Shooting Techniques Useful shooting functions are all made available within the shooting menu. After you’ve familiarized yourself with the use of the shooting menu, consult the following pages describing each of the various functions.

  • Page 80: Use Of The Shooting Menu

    Use of the Shooting Menu Functions of the Shooting Menu The shooting menu allows you to adjust image qualities, change the record mode, and use the various picture-taking functions. The functions contained in the shooting menu are divided into 4 groups. See “Using the Shooting Menu”...
  • Page 81 Settings retained after power is turned off After the power is turned off, some user settings will be retained in the camera’s memory, but others will return to their factory defaults. The chart below shows the available settings from this menu: Group Item Spot metering...

  • Page 82: Using The Shooting Menu

    Using the Shooting Menu 3 4 5 6 7 2 8 9 Group CARD NORMAL NORMAL EXIT OK Items for selection NORMAL NORMAL CANCEL Slide the lens barrier open until it clicks. • This turns power on in shooting mode. Press the menu button ( •...
  • Page 83 HARD NORMAL SOFT CANCEL SET OK AUTO NORMAL CANCEL To cancel a setting change Press on the arrow pad instead of the OK button in step 8. Temporarily changing a setting to shoot pictures To change the setting temporarily while shooting, follow the procedure below.

  • Page 84: Spot Metering (Placing Exposure Priority On The Center Of The Subject)

    Spot Metering on the Center of the Subject) If a shot is backlit, ordinary photometric settings (digital ESP metering) will make the subject appear too dark. To compensate for this, switch the camera over to the spot metering mode in the shooting menu. This feature is used to obtain the right exposure regardless of backlighting.
  • Page 85 Shooting in the spot metering mode Viewfinder Settings return to the default when the power is turned off. When the power is turned off the camera will return to the ESP mode. To make the camera retain its settings even after the power is turned off, set the clear settings function in the settings group to OFF (p.98).

  • Page 86: Correcting Image Brightness (Exposure Compensation)

    Correcting Image Brightness (Exposure Compensation) Exposure is adjusted automatically whenever a picture is taken. The camera can, however, be set for shorter or longer exposure in five increments from –2.0 to +2.0 (increased/decreased by 0.5). If automatic exposure is used, subjects containing a lot of white will appear darker, while subjects containing a lot of black will appear lighter.
  • Page 87 Monitor Settings return to the default when the power is turned off. When the power is turned off, exposure compensation returns to ± 0. To make the camera retain its settings even after the power is turned off, set the clear settings function in the settings group to OFF (p.98). HELP •...

  • Page 88: Iso Light Sensitivity Level (Setting Iso Sensitivity)

    ISO Light Sensitivity Level (Setting ISO Sensitivity) This camera can automatically determine the ISO sensitivity level based on the brightness of the subject. However, for certain kinds of pictures it is better to set the ISO sensitivity level manually. For operating instructions see “Using the Shooting Menu” (p.72). Shooting Group Menu Items: AUTO DIGITAL ZOOM...
  • Page 89 Monitor ISO100 Settings return to the default when the power is turned off. When the power is turned off, the camera will return to the “AUTO” mode. To make the camera retain its settings even after the power is turned off, set the clear settings function in the settings group to OFF (p.98).

  • Page 90: Enlarging Shots Even Further (Digital Zoom)

    Enlarging Shots Even Further (Digital Zoom) If you find that the camera’s normal optical zoom does not provide enough magnification, use the digital zoom function to increase magnification to up to 9x. Within the digital zoom range (3x – 9x), image quality becomes grainy. For operating instructions see “Using the Shooting Menu”...
  • Page 91 Shooting Using Digital Zoom The greater the magnification, the more susceptible images are to even small amounts of movement, shaking, or vibration. The use of a tripod and the selftimer is therefore recommended to help prevent blurring. Settings return to their default values when the camera is turned off.

  • Page 92: Creating Panoramic Pictures (Panorama Function)

    Creating Panoramic Pictures (Panorama Function) Using standard Olympus SmartMedia cards also allows you to shoot panoramic shots easily. This function is not available with other brands of cards. With multiple images in which the edges of the subject can be overlapped, it is possible to use CAMEDIA Master to join the images into a single panoramic shot.
  • Page 93 • The arrow indicating direction in which frames will overlap changes to the selected direction. If this direction is up or down, the boundaries indicating frame overlap will be displayed on the top and bottom edges of the monitor. Take the shot. •...
  • Page 94 The camera itself is not equipped to create panoramic shots from overlapping images. Panoramic shots must be pieced together using CAMEDIA Master. Refer to the CAMEDIA Master online help for information on how to create composite images. If connecting to the right: Shift the camera so that the right edge of the previous shot becomes the left edge of the next shot (If you shift the camera in the wrong direction, you will not be able to stitch the panorama).

  • Page 95: Adjusting The Color Tone (White Balance)

    Adjusting the Color Tone (White Balance) This camera uses auto white balance to shoot the subject in a natural- looking tone. However, it may sometimes be difficult to get satisfactory results automatically due to lighting or weather conditions. In such cases, change the white balance settings.
  • Page 96 Monitor Settings return to the default when the power is turned off. When the power is turned off the camera will return to the “AUTO” mode. To make the camera retain its settings even after the power is turned off, set the clear settings function in the settings group to OFF (p.98). Adjusting the Tone (continued) Switching from “AUTO”...

  • Page 97: Picture Preferences: Quality Vs. Quantity (Record Mode)

    Picture Preferences: Quality vs. Quantity (Record Mode) The camera offers four different recording modes (resolutions) that can be selected depending on whether you want better image quality or more pictures. Selecting higher image resolutions will result in better quality pictures, while selecting lower image resolutions will enable you to store more images in the camera (p.21).
  • Page 98 TIFF 1600x1200 1280x960 1024x768 640x480 CANCEL SET OK TIFF allows you to change the number of pixels. Monitor Tip on selecting a record mode The record mode can be selected depending on how you will be using the picture: • If you want to send the picture attached to an e-mail, select SQ. •...
  • Page 99 Picture Preferences: Quality vs. Quantity (continued) Restrictions when using of high image quality settings Selecting a high resolution setting increases the amount of time you must wait after taking a shot (the green lamp continues to blink longer), increases the length of playback time, and reduces the number of pictures that you can store on a card.

  • Page 100: Making Images Sharper (Sharpness)

    Making Images Sharper To emphasize the subject’s outlines and contours and make them more distinct and sharp, change the sharpness setting to “HARD”. If you plan to process the images further on a personal computer, it is better to change the sharpness setting to “SOFT”. For operating instructions see “Using the Shooting Menu”...

  • Page 101: Shooting Pictures With Strong Contrast (Contrast)

    Shooting Pictures with Strong Contrast (Contrast) If you want to take pictures with strong contrast (more distinction between lighter and darker areas), set the camera’s contrast to “HIGH”. If you intend to process your pictures on a personal computer, it is better to set the camera’s contrast to “LOW”.
  • Page 102 Shooting Pictures with Strong Contrast (continued) Settings return to the default when the power is turned off. Turning the camera off also resets the contrast to “NORMAL”. To make the camera retain its settings even after the power is turned off, set the clear settings function in the settings group to OFF (p.98).

  • Page 103: Confirming Pictures Directly After Shooting (Rec View)

    Confirming Pictures Directly After Shooting If you want to confirm your pictures on the monitor immediately after shooting, without using the playback mode set Rec View to “ON”. This will cause the most recently taken picture to be displayed on the monitor immediately.
  • Page 104 Confirming Pictures Directly After Shooting (continued) Taking pictures during Rec View playback Even when the monitor is displaying an image during Rec View, it is still possible to shoot as long as the green lamp beside the viewfinder has gone out.

  • Page 105: Changing How File Names Are Assigned (File Naming)

    Changing How File Names are Assigned (File Naming) Pictures are stored in the camera’s memory media as files. It is possible to change the rules by which these files are named. This setting remains in memory even after the power is turned off. For operating instructions see “Using the Shooting Menu”...
  • Page 106 Settings Group Menu Items: REC VIEW NAME RESET FILE RESET CANCEL Settings: FILE NAME RESET AUTO FILE CANCEL SET OK NAME RESET (Initial setting) When the card is changed, folder and file numbers restart from default setting. Example: Folder No.102 File No.
  • Page 107 Changing How File Names are Assigned (continued) AUTO FILE Folder numbers do not change when changing to a new SmartMedia card. When copying images onto a personal computer by folder, it is possible to collect the copied images into the same folder using Copy command.

  • Page 108: To Retain Settings Even After Power Is Turned Off (Clear Settings)

    To Retain Settings Even After Power is Turned Off If there is a under the memory column of the chart in “Functions of the Shooting Menu” (p.65, p.103) section, the function in question returns to the default setting when the power is turned off. Those items marked with a can be changed and reset to retain the new setting in memory even after the power is turned off (OFF).

  • Page 109: Turning Off Warning Sounds (Beep Sound)

    Turning Off Warning Sounds (Beep Sound) When shooting weddings or for wildlife shots, the camera warning sounds can be a liability. In such cases, the beep sound can be set to “OFF”. This setting remains in memory even after the power is turned off. Also settings can be set by the Playback Menu.

  • Page 110: To Adjust Monitor Brightness (Monitor Adjustment)

    To Adjust Monitor Brightness (Monitor Adjustment) The brightness of the monitor can be adjusted. This setting remains in the camera memory even after the power is turned off. The same function is also available in the playback mode. For operating instructions see “Using the Shooting Menu” (p.72). Settings Group Menu Items: REC VIEW NAME RESET...

  • Page 111: Chapter 6 Advanced Playback Techniques

    Advanced Playback Techniques The playback menu is used for playback functions including playing movie pictures stored in the camera and playing stored images in order. After you’ve familiarized yourself with use of the playback menu, consult the following pages describing each of the various functions.

  • Page 112: Use Of The Playback Menu

    Use of the Playback Menu Functions of the Playback Menu The playback menu is used for playback functions including automatically playing images in order and playing movie pictures stored in the camera. See “Using the Playback Menu” (p.104) for information on how to operate the playback menu.
  • Page 113 Settings after power is turned off After the power is turned off, some user settings will be retained in the camera’s memory, but others will return to their factory defaults. The chart below shows the available settings from this menu: Group Item Image information...

  • Page 114: Using The Playback Menu

    Using the Playback Menu 3 4 5 6 7 2 8 9 1 Group PLAY CARD EXIT OK Items for selection PLAY CARD EXIT OK With the lens barrier closed, push the monitor button ( • The power turns on in playback mode and the monitor displays the last image taken.
  • Page 115 CANCEL SET OK To cancel the change To cancel the setting, in step 8 press pressing the OK button. Press on the arrow pad. • The possible settings for that item are displayed. Press on the arrow pad to highlight the desired setting.

  • Page 116: To Play Back Still Images One By One (Automatic Playback)

    To Play Back Still Images One by One (Automatic Playback) Images (the first frames of movie pictures) are automatically played back in order. This is useful for reviewing images in sequence. Before displaying the playback menu, be sure to display an image that does not have the movie ( For operating instructions see “Using the Playback Menu”...

  • Page 117: To Play Back Movie Pictures (Movie Playback)

    To Play Back Movie Pictures (Movie Playback) When playing back movie pictures, before going to the playback menu, the images with the movie “ have to be displayed. For operating instructions see “Using the Playback Menu” (p.104). First, display the image with the movie “ playback, and then go to the playback menu (p.102).
  • Page 118 Close the playback menu once, select the movie picture you want to play, then display the playback menu once more. For C-200 ZOOM models sold in the PAL color system regions. Play back pictures under the same conditions that they were taken.

  • Page 119: Printing Using Dpof-Compatible Printers Or Photo Labs (Print Reserve)

    Printing Using DPOF-Compatible Printers or Photo Labs DPOF allows you to specify in advance which images you want printed by a dedicated printer, DPOF-compatible printer or DPOF-equipped photo lab (p.47). However, it is not possible to set a print reserve for images that have the movie ( For operating instructions see “Using the Playback Menu”...
  • Page 120 CANCEL RESERVE EXIT Press • The print reserve/print cancel screen is displayed. Press pad to select 1-frame reserve, then press 1-frame reserve All-frame reserve Reserve cancel • A screen allowing you to select images is displayed. The zoom lever may be pushed toward angle) as necessary to see a list display.
  • Page 121 Printing Using DPOF-Compatible Printers or Photo Labs (continued) EXIT CANCEL Print reserve mark To set print reserve for all images In step 3, select all-frame reserve, then press the OK button. Print reserve will be set for all images. If printing is completed Print reserve instructions remain on the SmartMedia card even after images are printed.

  • Page 122: Rotating Images During Playback (Rotated Playback)

    Rotating Images During Playback Images taken with the camera held vertically will normally be displayed on their sides when played back on the monitor. The rotated playback function allows you to rotate such images to the upright position. Display the image you want to rotate before the Playback Menu is displayed.

  • Page 123: Displaying Image Information On The Monitor (Image Information Display)

    Displaying Image Information on the Monitor Information recorded with the image when it was shot can be displayed on the monitor. This information appears 3 seconds after the image appears on the monitor. For operating instructions see “Using the Playback Menu” (p.104). Playback Group Menu Items: PLAY ROTATE...

  • Page 124: Changing The Color Or Size Of Images (Edit)

    Changing the Color or Size of Images (Edit) This takes images in black and white or sepia tones. Also small images (recorded images at low resolution) may be made. Images that have had their color changed or been changed in size are saved in memory as a new image.

  • Page 125: To Erase All Images (All Erase Frames)

    To Erase All Images This erases all the pictures stored on a card. Protected images (p.44), however, will not be erased. For operating instructions see “Using the Playback Menu” (p.104). Card Group Menu Items: CARD CARD SETUP CANCEL Settings: CARD SETUP CANCEL GO OK CANCEL...

  • Page 126: To Initialize (Format) A Card

    To Initialize (Format) a Card Using SmartMedia cards by companies other than Olympus, as well as cards formatted on another device including a personal computer, may result in longer image-writing times and decreased storage capacity. Such cards should be reformatted by the camera before use.
  • Page 127 Settings: CARD SETUP CANCEL GO OK Starting and canceling formatting Select “ ” in card setup screen, then press the OK button. The follwing screen will be displayed: CANCEL GO OK CAUTION • Once formatting has been started, it can not be canceled part way through. •...

  • Page 128: To Change The Number Of Frames Displayed (Index Display)

    To Change the Number of Frames Displayed In playback mode, you can press the zoom lever and display the images catalog style. It is also possible to change the number of images that are displayed on the monitor when using the “Index Display.” This setting remains in the camera memory even after the power is turned off.

  • Page 129: Chapter 7 Transferring Your Pictures To A Computer

    Transferring Your Pictures to a Computer Images can be transferred to a computer in a number of ways. This chapter primarily explains how to do this using the special USB (Universal Serial Bus) cable that comes included with the camera.

  • Page 130: Read Before Connecting To A Computer

    Contact Apple Computer, Inc. for USB support. *2 Newest version download, able from the Olympus Website, too. Playing movie pictures on the computer requires QuickTime 4.0 or higher. QuickTime 4.0 is available on the included software CD.
  • Page 131 Do not leave the camera connected for an extended period of time when using the batteries The camera will automatically turn on when it is connected to the computer. Also while it is connected, the camera will not go into standby (power saving) mode.

  • Page 132: Connecting The Camera To A Computer

    Connecting the Camera to a Computer Connecting to a Windows PC If you are using a computer installed with the Windows 98/98SE operating system, install the USB driver during operation using the included software CD. Viewfinder Green lamp Make sure the camera’s power is off.
  • Page 133 Under Windows 98/98SE When connecting for the first time, use the included software CD to install the USB driver. Refer to the instructions in “Installing the USB Driver” on the following section. Under Windows 2000/Me When connecting for the first time, the computer will load the USB driver automatically.
  • Page 134 Installing the USB Driver (For Windows 98/98SE users only) ex; CAMEDIA Master CD-ROM After connecting the camera to the computer, the computer will recognize the camera as new hardware and the screen shown at left will be displayed. Click the [Next] button. Confirm that “Search for the best driver for your device, [Recommended].”...
  • Page 135 Connecting the Camera to a Computer (continued) Click the check marks on both “Floppy disk drives” and “CD- ROM Drive” to remove them from the list. Next, click “Specify a location” and check, then click the [Browse...] button. Click [ + ] to open the USB folder, and select the Win98 folder by double clicking on it then press the [OK] button.

  • Page 136: Connecting To A Macintosh

    Connecting the Camera to a Computer (continued) Connecting to a Macintosh Check the version of Mac OS and make sure that if the computer can be connected to the camera (p.120). Viewfinder Green lamp To continue, turn to “Transferring Image Files” (p.127). Make sure the camera’s power is off.

  • Page 137: Transferring Image Files

    Transferring Image Files Transferring Image Files to a Windows PC If the camera and computer are connected correctly, the SmartMedia card inserted in the camera should be displayed in “My Computer” folder. It is then possible to handle the files on the card in the same way you would files on a floppy disk.
  • Page 138 Viewfinder Orange lamp Image files are stored inside a folder in the “DCIM” folder (generally named “100OLYMP”). In addition, Explorer and other file management software can also be used to handle image files. See the instructions of Windows Help and in the computer’s user manual for more details on copying and moving files.

  • Page 139: Transferring Image Files To A Macintosh

    Transferring Image Files to a Macintosh If the camera and computer are connected correctly, the SmartMedia card inserted in the camera should be displayed on the desktop. It is then possible to handle the files on the card in the same way you would files on the computer’s hard disk.
  • Page 140 Transferring Image Files (continued) Image files are stored inside a folder in the “DCIM” folder (generally named “100OLYMP”). See the instructions in Mac OS Online Help and in the computer’s user manual for more details on copying and moving files. Image files transferred to the computer can be viewed using any software application capable of viewing JPEG-format files, including image processing software (CAMEDIA Master,...

  • Page 141: Disconnecting The Camera Or Removing The Smartmedia Card

    Disconnecting the Camera or Removing the SmartMedia Card Disconnecting from a Windows PC In order to prevent computer error, be sure to make the following disconnection preparations before proceeding. • Remove the SmartMedia card from the camera. • Disconnect the camera from the computer (unplug the USB cable). If the computer generates an error, disconnect the USB cable and restart the computer.
  • Page 142 When using Windows 2000/Me After performing Step 4 from the previous page, you can remove the card. When disconnecting the USB cable, be sure to take the following steps. Double-clicking the “Remove/Eject Hardware” icon on the taskbar will bring up the Remove Hardware screen. Select the camera from the list of devices, then click the [Stop] button.

  • Page 143: Disconnecting From A Macintosh

    Disconnecting the Camera or Removing the SmartMedia Card (continued) Disconnecting from a Macintosh When removing the card from the camera or disconnecting the camera (USB cable) from the computer, take the following steps so that a computer error does not occur. If the computer generates an error, disconnect the USB cable and restart the computer.

  • Page 144: Transferring Files Without Using The Camera

    Using an adapter capable of accepting SmartMedia cards allows image files to be transferred from the camera to a computer without directly connecting the two. Consult your Olympus Customer Support Center for the most up-to- date information on the various available devices and products. Computer Conditions 3.5-inch floppy disk drive...

  • Page 145: Appendix

    Appendix Please read the following pages if you suspect your camera may not be working properly. Information on camera specifications and other details are also explained.

  • Page 146: Answers To Frequently Asked Questions

    Answers to Frequently Asked Questions How long will the camera batteries last? The alkaline battery included with the camera should be able to take at least 100 pictures (assuming the flash is used for 50% of these), but this is only a rough estimate. Battery life is affected by many variables, such as how often you use the monitor, how often you use the flash, the type of batteries used and environmental conditions.
  • Page 147 How should I store the camera? Cameras can be damaged by dust, moisture and salt. Wipe the camera with a slightly damp cloth and dry thoroughly before storing. Do not store with mothballs. Remove the batteries if you do not plan to use the camera for a long period of time.

  • Page 148: Troubleshooting (Check Before Taking In For Repair)

    Troubleshooting (Check before Taking in for Repair) Operating Problems The camera does not work • The power is off. ➜ Open the lens barrier and turn on the power. • The batteries are loaded incorrectly. ➜ Reload the batteries correctly. •...
  • Page 149 The flash does not fire • The flash is not fully opened. ➜ Use your finger to push the flash housing all the way up before resuming use. • The subject is well lit. ➜ Set the flash mode to Fill-in if you want the flash to fire regardless of lighting conditions.

  • Page 150: Picture Problems

    Picture Problems The picture is out of focus • The camera was jarred when the shutter button was pressed. ➜ Hold the camera firmly and press the shutter button smoothly. • The viewfinder AF target mark was not positioned on the subject. ➜ Position the autofocus frame on the subject, or use the focus lock.
  • Page 151 The colors of pictures taken indoors look unnatural • The lighting affected the picture. ➜ Set the flash to fill-in mode. • The subject is mostly dark. ➜ Use flash or increase exposure compensation +. • The white balance setting is incorrect. ➜ Set the white balance to suit lighting conditions.

  • Page 152: Error Codes

    Error Codes The monitor displays error codes to alert you to various problems. Warning Monitor Display NO CARD CARD FULL WRITE PROTECT CARD ERROR Error There is no card in the camera. The card is not inserted correctly. The card is full. The camera cannot enter picture, erase or card- format mode.

  • Page 153: Using The Camera With Optional Equipment

    Using the Camera with Optional Equipment This camera can be used with the following optional equipment: Printer (P-400/P-200/P-330N(E)) SmartMedia AC adapter FlashPath PC card adapter SmartMedia reader/writer Camera MO drive Computer As of March 2001...

  • Page 154: Optional Items

    • Standard SmartMedia Card (8/16/32/64/128MB) • FlashPath Floppy Disk Adapter • PC Card Adapter • NiMH Batteries • NiMH Battery Charger Set • USB SmartMedia Reader/Writer As of March 2001 Visit the Olympus web site for the latest information on optional items. http://www.olympus.com...

  • Page 155: Compatibility Of The Still Picture Data

    Notes about playback Pictures taken with this camera and recorded on a card can be played back on another Olympus digital camera. However, there are some limitations depending on the playback camera: • Still pictures larger than the maximum picture size available on the playback camera may be displayed as thumbnails.

  • Page 156: Specifications

    480 pixels ~ 1600 Full auto TTL, Preset (daylight, overcast, tungsten light, fluorescent light) Olympus lens 5.4 ~ 16.2mm, F2.8 ~ 4.4, 8 elements in 6 groups (equivalent to 35 ~ 105mm lens on a 35mm camera) Digital ESP metering system, Spot metering...
  • Page 157 Battery charging time for flash: Flash working range: Flash modes: Autofocus: Exposure compensation: Exposure compensation system Focusing range: Selftimer: External connectors: Date and time: Automatic calendar system: Up to year 2031 Calendar power supply: Backup by capacitor Usage environment: Power supply: Dimensions (excluding the raised portion): Weight: Specifications are subject to change without any notice or obligation on the...

  • Page 158: Glossary Of Terms

    Glossary of Terms Aperture This is a mechanism for adjusting the amount of light that passes through the lens. Lower values allow more light to pass, while higher values lessen the amount of light. Backlight A light source that is behind the subject.
  • Page 159 A method for indicating film speed laid down by the International Organization for Standardization (ISO) (e.g. “ISO100”). Higher ISO values indicate greater sensitivity to light so that images can be exposed even in low- light conditions. JPEG (Joint Photographic Experts Group) A compression format for color still images.

  • Page 160: Index

    Index AC adapter ... 16 All Erase Frames ... 115, 139 Auto-Flash ... 66 Automatic Playback ... 106 Backlighting, backlit ... 66, 67, 74, 140 Battery(-ies) ... 7, 20, 136 Beep Sound ... 99 BLACK & WHITE ... 114 CAMEDIA Master ... 82, 128, 130 Card ...
  • Page 161 One-Frame Erase ... 45, 139 Optical Zoom ... 31 Panorama (panoramic pictures) ... 82 Playback Menu ... 102 Print Reserve ... 109 Printing ... 47, 109 Quick Focus ... 53, 140 Record mode ... 21, 58, 62, 87 Rec View ... 93 Red-eye Reduction ...
  • Page 162 (Technical support) Tel. 1-888-553-4448 (Toll-free for within 30 days of purchase.) Tel. 1-631-844-5520 (After 30 days of purchase, contact this number.) OLYMPUS OPTICAL CO. (EUROPA) GMBH. (Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. 040-237730 (Letters) Postfach 10 49 08, 20034 Hamburg, Germany.

Table of Contents