Page 1
DVP-PQ1 3 7 63 1515 0 RMT-D148A US Model Canadian Model SERVICE MANUAL AEP Model UK Model E Model Mexican Model SUPPLEMENT-1 File this supplement with the service manual. (02-003) Subject: Addition of part No. for the boards L 13942296513 u163 http://www.xiaoyu163.com...
Page 2
DVP-PQ1 SECTION 8 3 7 63 1515 0 REPAIR PARTS LIST 8-1. EXPLODED VIEWS • Abbreviation CND : Canadian model AE1 : AEP model AE2 : AEP model MX : Mexican model 8-1-2. LOWER CASE SECTION (Service manual page 8-2) : Points changed portion.
Page 3
http://www.xiaoyu163.com 3 7 63 1515 0 8-2. ELECTRICAL PARTS LIST • Abbreviation CND : Canadian model AE1 : AEP model AE2 : AEP model MX : Mexican model Page Former Type New Type Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark AV-65 BOARD, COMPLETE (US, CND)
Page 5
DVP-PQ1 3 7 63 1515 0 RMT-D148A US Model Canadian Model SERVICE MANUAL AEP Model UK Model E Model Mexican Model SUPPLEMENT-2 File this supplement with the service manual. (03-020) Subject: Addition of part No. for flexible flat cables...
Page 6
DVP-PQ1 SECTION 8 3 7 63 1515 0 REPAIR PARTS LIST 8-1. EXPLODED VIEWS 8-1-2. LOWER CASE SECTION (Service manual page 8-2) : Points changed portion. not supplied not supplied not supplied supplied L 13942296513 not supplied not supplied...
Page 7
ENERGY STAR is a U.S. registered mark. As an DIGITAL OUT (COAXIAL): Phonojack/0.5Vp–p/75Ω ® ENERGY STAR Partner, Sony Corporation has VIDEO OUT: Phonojack/1.0Vp–p/75Ω ® determined that this product meets the ENERGY STAR S-VIDEO OUT: 4-pin mini DIN/ guidelines for energy efficiency.
Page 8
OPERATION. REPLACE THESE COMPONENTS WITH DE FONCTIONNEMENT. NE REMPLACER CES COM- SONY PARTS WHOSE PART NUMBERS APPEAR AS POSANTS QUE PAR DES PIÈCES SONY DONT LES SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- NUMÉROS SONT DONNÉS DANS CE MANUEL OU LISHED BY SONY.
http://www.xiaoyu163.com 3 7 63 1515 0 TABLE OF CONTENTS Section Title Page Section Title Page Service Note ................4 IC PIN FUNCTION DESCRIPTION GENERAL ..............1-1 5-1. System Control Pin Function (MB-103 Board IC104) ..........5-1 DISASSEMBLY TEST MODE 2-1. LID Assembly Removal ..........
http://www.xiaoyu163.com SERVICE NOTE 3 7 63 1515 0 1. DISASSEMBLY 2. PRECAUTIONS FOR USE OF BASE UNIT • This set can be disassembled in the order shown below. As the laser diode in the base unit is easily damaged by static electricity, desolder the laser tap of the flexible board of the base unit when using it.
• Place the player in a location with adequate output to your TV via a VCR, the copy- 1498 Sindhi 1150 Estonian your player , please consult your near est Sony dealer . 131 1 Kirghiz 1665 Yoruba For Asian models only: To video input ventilation to prevent heat build-up in the player .
Page 12
The album or track currently being played is shaded the list displayed on the menu. in the list. Notes on connecting to your TV To adjust the TV volume (for Sony To turn off the player Operating the remote Basic connection...
DVP-PQ1 SECTION 2 DISASSEMBLY 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 2-1. LID ASSEMBLY REMOVAL 2-3. BASE UNIT REMOVAL 4 Fulcrum retainer (R) 2 Fulcrum retainer (L) 1 Three INS screws 1 Screw ×...
DVP-PQ1 SECTION 4 3 7 63 1515 0 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS For schematic diagram: • Caution when replacing chip parts. AND SCHEMATIC DIAGRAMS. New parts must be attached after removal of chip.
DVP-PQ1 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 3 7 6 3 1 5 1 5 0 There are a few cases that the part isn't mounted in this model is printed on this diagram. MB-103 (SIGNAL PROCESS, SERVO) PRINTED WIRING BOARD –...
DVP-PQ1 MB-103 (RF AMP, SERVO) SCHEMATIC DIAGRAM • See page 4-5 for printed wiring board. The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont line with mark 0 are critical for safety.
Page 35
DVP-PQ1 AV-65 (AUDIO/VIDEO OUT) PRINTED WIRING BOARD 3 7 6 3 1 5 1 5 0 – Ref. No.: AV-65 board; 1,000 series – : Uses unleaded solder. There are a few cases that the part isn't mounted in this model is printed on this diagram.
Page 37
DVP-PQ1 3 7 6 3 1 5 1 5 0 IF-95 (INTERFACE CONTROL) PRINTED WIRING BOARD – Ref. No.: IF-95 board; 1,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram.
DVP-PQ1 3 7 6 3 1 5 1 5 0 SW-370 (FUNCTION SWITCH) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: SW-370 board; 1,000 series – : Uses unleaded solder. SW-370 BOARD JL903 There are a few cases that the part isn't mounted in this model is printed on this diagram.
DVP-PQ1 3 7 63 1515 0 SW-371 (DOOR SWITCH) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: SW-371 board; 1,000 series – : Uses unleaded solder. There are a few cases that the part isn't mounted in this model is printed on this diagram.
DVP-PQ1 3 7 63 1515 0 DPSN-20CP (SWITCHING REGULATOR) PRINTED WIRING BOARD – Ref. No.: DPSN-20CP board; 4,000 series – – US, CND – : Uses unleaded solder. There are a few cases that the part isn't mounted in this model is printed on this diagram.
DVP-PQ1 3 7 63 1515 0 DPSN-20CP-2 (SWITCHING REGULATOR) PRINTED WIRING BOARD – Ref. No.: DPSN-20CP-2 board; 5,000 series – – AEP, UK, E – : Uses unleaded solder. There are a few cases that the part isn't mounted in this model is printed on this diagram.
Page 45
DVP-PQ1 SECTION 5 IC PIN FUNCTION DESCRIPTION 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
Page 46
http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 5-2 E http://www.xiaoyu163.com...
DVP-PQ1 SECTION 6 3 7 63 1515 0 TEST MODE 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment eas- The same contents as board detail check by serial interface can be ily using the remote commander and monitor TV.
Page 48
http://www.xiaoyu163.com 3 7 63 1515 0 Submenu (2-6) Mount resistance confirmation check Error 22: region code discord Selecting 2 and subsequent items calls the submenu screen of each Accordance between region codes, one is detected with item. model resistance and destination resistance, and the other Indication of “–”...
Page 49
http://www.xiaoyu163.com 3 7 63 1515 0 5. Supply (5-5) ARP RAM Check (5-2) ARP Register Check Data write → read, and accord check Data write → read, and accord check Error 11: ARP RAM read data discord Error 08: ARP register write, and read data discord The program code data stored in ROM are copied to all Data 0x00 to 0xFF is written sequentially to the ARP TMAX areas of RAM (IC303) connected to the ARP (IC301)
Page 50
http://www.xiaoyu163.com 3 7 63 1515 0 7. Video Check Items List (7-2) Color Bar AVD color bar command write → Video OUT 2) Version Error: Not detected. (2-2) Revision The command is transferred to the AVD, and the color bar (2-3) ROM Check Sum signals are output from video terminals.
http://www.xiaoyu163.com 3 7 63 1515 0 6-4. DRIVE AUTO ADJUSTMENT 1. DVD-SL (single layer) [ENTER] Select , insert DVD single layer disc, and press key, and the adjustment will be made through the following steps, then On the Test Mode Menu screen, press key on the remote com- adjusted values will be written to the EEPROM.
Page 52
http://www.xiaoyu163.com 3 7 63 1515 0 2. CD 3. DVD-DL (dual layer) [ENTER] [ENTER] Select , insert CD disc, and press key, and the adjust- Select , insert DVD dual layer disc, and press key, ment will be made through the following steps, then adjusted val- and the adjustment will be made through the following steps, then ues will be written to the EEPROM.
http://www.xiaoyu163.com 3 7 63 1515 0 6-5. DRIVE MANUAL OPERATION 0. Disc Check Memory Disc Check On the Test Mode Menu screen, select , and the manual opera- tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. 1.
Page 54
http://www.xiaoyu163.com 3 7 63 1515 0 Focus Search the focus and turn on the focus. Disc Type 1. Disc Type Auto Check Turn ON/OFF the tracking servo. 2. DVD SL 12cm 3. DVD DL 12cm 4. CD 12cm Sled Turn ON/OFF the sled servo. 5.
Page 55
http://www.xiaoyu163.com 3 7 63 1515 0 5. Auto Adjustment – The following commands are valid for DVD-DL disc only – → Fj (L1 → L0) Focus jump forward. Auto Adjustment (Trk/Sled Servo OFF) 1. Auto TRK. Offset 2. Auto Focus Balance 3.
http://www.xiaoyu163.com 3 7 63 1515 0 6-6. EMERGENCY HISTORY EEPROM DATA 3 -– DL -– CD LCD Analog FRSW xx xx ### EMG. History ### PLL Dac Gain xx xx Mirror Time xx xx Laser Hours xxhxxm xxhxxm THR A&L xx xx xx/xx xx : PREV Data 1.
http://www.xiaoyu163.com 3 7 63 1515 0 6-7. VERSION INFORMATION 6-9. TROUBLE SHOOTING 6-9-1. Faults in Test Mode (MB-103 board) ### Version Infomation ### 1. The test mode menu is not displayed. 1-1. Board visual check IF con. Ver.x.xxx(xxxx) Check that the ICs of SYSCON (IC104), ROM (IC106 or Group IC107), AVD (IC403), ARP &...
Page 58
http://www.xiaoyu163.com 3 7 63 1515 0 1-3-1. When the 8.25 MHz signal appears at CPUCK 2. Test mode menu is displayed but the machine stops • Check the XRD, XWRH and CS0X signal. when menu is selected Observe XRD (pin-u;), XWRH (pin-ua), and CS0X (pin-tk) 2-1.
Page 59
http://www.xiaoyu163.com 3 7 63 1515 0 6. Picture is output but audio is not output. 3-3. Check IFBSY (pin-5), XIFCS (pin-6), SI0 (pin-4), SO0 (pin-1) and SC0 (pin-3) at CN101 Check the audio data output (at pins-wf, wk, and wl) of AVD (IC403) If they are fixed to “H”...
DVP-PQ1 SECTION 7 ELECTRICAL ADJUSTMENT 3 7 63 1515 0 7-1. POWER SUPPLY CHECK In making adjustment, refer to 7-4. Adjustment Related Parts Arrangement. 1. SWITCHING REGULATOR DPSN-20CP (US, CND) Note: During diagnostic check, the characters and color bars can DPSN-20CP-2 (AEP, UK, E) be seen only with the NTSC monitor.
http://www.xiaoyu163.com 3 7 63 1515 0 7-2. ADJUSTMENT OF VIDEO SYSTEM 2. Checking S Video Output S-Y <Purpose> Check S-terminal video output. If it is incorrect, pictures will not 1. Video Level Adjustment (MB-103 BOARD) be displayed correctly in spite of connection to the TV with a S- <Purpose>...
DVP-PQ1 SECTION 8 REPAIR PARTS LIST 3 7 63 1515 0 8-1. EXPLODED VIEWS NOTE: The components identified by mark • -XX and -X mean standardized parts, so they may • The mechanical parts with no reference number in 0 or dotted line with mark 0 are have some difference from the original one.
http://www.xiaoyu163.com 3 7 63 1515 0 8-1-2. LOWER CASE SECTION not supplied not supplied not supplied not supplied not supplied supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 not supplied not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la...
http://www.xiaoyu163.com AV-65 3 7 63 1515 0 8-2. ELECTRICAL PARTS LIST NOTE: The components identified by • Due to standardization, replacements in the • Items marked “*” are not stocked since they mark 0 or dotted line with mark parts list may be different from the parts speci- are seldom required for routine service.
Page 66
http://www.xiaoyu163.com AV-65 IF-95 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR104 1-216-295-91 SHORT CHIP R227 1-216-057-00 METAL CHIP 2.2K 1/10W JR105 1-216-295-91 SHORT CHIP R228 1-208-800-11 METAL CHIP 5.6K 0.5% 1/10W JR106 1-216-295-91 SHORT CHIP...
Page 67
http://www.xiaoyu163.com IF-95 MB-103 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > C103 1-126-209-11 ELECT CHIP 100uF C104 1-162-970-11 CERAMIC CHIP 0.01uF IC800 6-701-825-01 IC BD4731G-TR C105 1-162-970-11 CERAMIC CHIP 0.01uF IC801 8-759-832-05 IC BA18BC0FP-E2...