License plate capture series kit
d&n license plate camera w/ 11 ir led illuminator housing & bracket (8 pages)
Summary of Contents for Okina USA HUB-TF
Page 1
Please read the Operational Manual before attempting to use this product. HUB-TF HUB-TFHB Operational Manual Professional Camera Housing - Front Opening HUB-TF HUB-TFHB * UL certification only refers to the power converter and the power module FEATURES Constructed from die-cast aluminum alloy and is powder coated with stove finish ...
FITTING INSTRUCTIONS Unscrew the 3 captive Retaining Screws (C) and remove the Housing Cover (A) from the Housing Base (B). Release the 4 Keyhole Screws (F) and then slide and withdraw the Camera Platform (G) from the Housing Base (B). Mount the Camera (not included) (H) onto Platform (G) using the 1/4"...
WIRING DIAGRAM The figure above shows the internal wiring diagram of the HUB-TF & HUB-TFHB for the window demister. A spare 6-way terminal block is provided at the rear of the enclosure for the camera when necessary and lens connections. Circuit identified as follows: TB.1...
Absolutely No Returns will be accepted if any component is missing/damaged or if any cable is cut or tampered with. WARRANTY OKINA USA Products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1.
IMPORTANT NOTE Always unplug the top section of the earth wire from the base wire when disassembling the housing. Remember to plug the top and bottom together again when reassembling the housing. UL certification refers only to power converter & power module.