Fujitsu LIFEBOOK U727 Operating Manual

Hide thumbs Also See for LIFEBOOK U727:

Operating manual (121 pages)

Quick start manual (2 pages)

Operating manual (100 pages)

Table Of Contents

100

101

102

Table of Contents

Quick Links

System

Operating Manual

FUJITSU LIFEBOOK U727

FUJITSU LIFEBOOK U747

FUJITSU LIFEBOOK U757

Table of Contents

Summary of Contents for Fujitsu LIFEBOOK U727

Page 1 System Operating Manual FUJITSU LIFEBOOK U727 FUJITSU LIFEBOOK U747 FUJITSU LIFEBOOK U757...
Page 2 You can ﬁnd driver updates at: DOWNLOADS Should you have any technical questions, please contact: • our Hotline/Service Desk http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS • • Your sales partner • Your sales ofﬁce We hope you enjoy working with your new Fujitsu system!
Page 4 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "www.fujitsu.com/us" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "AskFujitsu@us.fujitsu.com" Copyright ©2017 Fujitsu America, Inc. All rights reserved FPC65-7692-01...
Page 5 FUJITSU LIFEBOOK U727 FUJITSU LIFEBOOK U747 FUJITSU LIFEBOOK U757 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
Page 6: Fujitsu
Information on the product description meets the design speciﬁcations of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notiﬁcation. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
Page 7: Table Of Contents
FUJITSU LIFEBOOK U727 ........
Page 8 Finishing component removal ............78 Fujitsu...
Page 9 Index ................. . 95 Fujitsu...
Page 10 Declarations of Conformity Declarations of Conformity DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu America, Inc. Address: 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Base Model Configuration: LIFEBOOKS U727,U747 and U757 Complies with Part 15 of the FCC Rules.
Page 11: Innovative Technology
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu accepts no liability whatsoever if any other operating system is used. Software oriented components of these instructions refer to Microsoft products, if they come within the scope of the delivery.
Page 12: Notational Conventions
• cross-references to another section, e.g. "Safety information" • cross-references to an external source, e.g. a web address: For more www.fujitsu.com/us information, go to • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
Page 13: Ports And Controls
This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarize yourself with these components before you start to work with the device. FUJITSU LIFEBOOK U727 Front 1 = Microphone (optional)
Page 14 5 = Headset port 3 = USB port 1 (Gen1) with charging function 6 = SmartCard reader (optional) (USB Type-C ™ Right side 1 = USB port 3.0 3 = VGA monitor port 2 = Displayport 4 = Security Lock device Fujitsu...
Page 15 Ports and controls Bottom 1 = Battery 4 = Memory service compartment 2 = Battery release 1 5 = Port Replicator port 6 = Battery release 2 3 = Service compartment M.2 module Fujitsu...
Page 16: Fujitsu Lifebook U747
Ports and controls FUJITSU LIFEBOOK U747 Front 1 = Microphone (optional) 7 = ON/OFF button 2 = WebCam (optional) 8 = Fingerprint sensor (optional) or palm vein sensor (optional) 3 = WebCam LED (optional) 9 = Memory card slot 4 = Touchpad...
Page 17 5 = SmartCard reader (optional) 3 = USB port 1 IGen 1) with charging function (USB Type-C ™ Right side 1 = Headset port 4 = LAN port 2 = USB port 3.0 5 = Security lock device 3 = Displayport Fujitsu...
Page 18 Ports and controls Bottom 1 = Battery 4 = Memory service compartment 2 = Battery release 1 5 = Port Replicator port 6 = Battery release 2 3 = Service compartment M.2 module Fujitsu...
Page 19: Fujitsu Lifebook U757
Ports and controls FUJITSU LIFEBOOK U757 Front 1 = Microphone (optional) 8 = Separate numeric keypad 2 = WebCam (optional) 9 = Fingerprint sensor (optional) or palm vein sensor (optional) 3 = WebCam LED (optional) 10 = Memory card slot...
Page 20 3 = USB 1 (Gen 1) port with charging function (USB Type-C ™ Right side 1 = Headset port 4 = HDMI port 2 = USB port 3.0 5 = LAN port 6 = Security lock device 3 = Displayport Fujitsu...
Page 21 Ports and controls Bottom 4 = Memory service compartment 1 = Battery 2 = Battery release 1 5 = Port replicator port 3 = Service compartment hard disk (HDD 6 = Battery release 2 or M.2 module) Fujitsu...
Page 22: Important Notes
"Removing and installing components during servicing", Page This notebook complies with the relevant safety regulations for data processing equipment. If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk. Fujitsu...
Page 23: Additional Safety Notes For Devices With Wireless Components
Energy saving under Windows ► Make use of the power management features (see "Using the power-management features", Page 42). Travelling with your notebook Mobile operation Notes Transportation Notebook Please observe the points listed below when travelling with your notebook. Fujitsu...
Page 24: Before You Travel
► Unplug the AC adapter and all external devices from the power outlet ► Disconnect the AC adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu...
Page 25: Cleaning The Notebook
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. You can use disinfectant wipes to clean the keyboard and the touchpad. Ensure that no liquid enters the device. Fujitsu...
Page 26: First-Time Setup Of Your Device
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...
Page 27: Selecting A Location
► Connect the power cable (1) to the AC adapter. ► Plug the AC cable (2) into a AC outlet. ► Connect the AC adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...
Page 28: Switching On The Device For The First Time
If a Windows operating system is installed on your device, you will ﬁnd more information on the system and drivers, help programs, updates, manuals etc. on the device or on the Internet under www.fujitsu.com/us You can ﬁnd information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
Page 29: Working With The Notebook
Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the hard disk and the keyboard functions. Fujitsu...
Page 30 Feature keys, the Function keys can be executed by pressing the keys directly Num Lock indicator Indicator Num Lock Indicator is illuminated: The key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Fujitsu...
Page 31 In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Scroll Lock indicator Indicator ScrollLock Indicator is illuminated: the key combination has been pressed. The effect that this key has varies between applications. Fujitsu...
Page 32: Switching On The Notebook
Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook does not switch itself off automatically, press the ON/OFF button for about ﬁve seconds. ► Close the LCD screen. Fujitsu...
Page 33: Keyboard
F Lock on/off setting prior to reboot. • If the system battery is removed and reinserted, the F Lock setting will be reset to the out of factory state (F Lock Off). Fujitsu...
Page 34 > Hot key: With F Lock Off, press Hot key alone; with F Lock On, press Fn + Hot key > Function key: With F Lock Off, press Fn + F1-F12; with F Lock On, press F1-F12 key alone Fujitsu...
Page 35 Key combinations using the Windows keys are detailed in the manual for your operating system. In addition, the following non-labeled key combinations are supported: Fujitsu...
Page 36 The Home key jumps to the beginning of the line, document, page, cell or screen of where your cursor is positioned. End key The End key jumps to the end of the line, document, page, cell or screen of where your cursor is positioned. Fujitsu...
Page 37 The key markings are liable to wear away over the life of the notebook. The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Fujitsu...
Page 38: Virtual Numeric Keypad
Virtual numeric keypad LIFEBOOK U727 LIFEBOOK U747 have virtual number blocks, LIFEBOOK U757 a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. special keys of the virtual numeric keypad are recog¥ble by the numbers...
Page 39 LIFEBOOK U757 has a separate number block on the far right. Fujitsu...
Page 40: Key Combinations
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the ﬁeld you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...
Page 41: Dragging Items
LCD Screen NotDesscreen High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the speciﬁcation can result in an unclear picture.
Page 42: Using Fingers
ﬁngers together. Input ﬁelds Data must be entered for some apps, for instance an Internet page or your name and password. ► Tap on the input ﬁeld. An on-screen keyboard opens, with which you can enter your data. Fujitsu...
Page 43: Webcam
LCD screen may ﬂicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu...
Page 44: Rechargeable Battery
To be able to make use of the optimal charging capacity of the batteries, the battery should be completely discharged and then fully recharged. If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Fujitsu...
Page 45: Removing And Installing The Battery
Working with the notebook Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when ﬁtting or removing a battery. Make sure that no foreign bodies get into the battery connections. Never store a battery for long periods in the discharged state. This can make it impossible to recharge.
Page 46: Installing A Battery
► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1) ► Slide the locking device (2) in the direction of the arrow. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
Page 47: Using The Power-Management Features
When you close the LCD screen, depending on the setting in Windows, the notebook automatically enters a power saving mode. The recommended settings for the Windows energy saving functions are predeﬁned as "Fujitsu Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.
Page 48: Memory Cards
(see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...
Page 49: Loudspeakers And Microphones
If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu...
Page 50: Wireless Components Wireless Lan / Bluetooth / Lte
Working with the notebook Wireless components Wireless LAN / Bluetooth The installation of radio components not approved by Fujitsu will invalidate the certiﬁcations issued for this device. Switching the wireless components on and off ► Press the key with the radio symbol (key ), to start the WirelessSelector.
Page 51: Ethernet And Lan
► Connect the network cable to your network connection (2). Your network administrator can help you to conﬁgure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...
Page 52: Your Port Replicator
9 = VGA monitor port 4 = Unlocking lever 11 = LAN port 5 = DC input connector 12 = Security Lock device The DVI port and the neighboring Displayport cannot be used at the same time. Fujitsu...
Page 53: Connecting The Notebook To The Port Replicator
► Disconnect the AC adapter cable from the DC input (DC IN) of the notebook. ► Position the notebook so that it is in line with the back edge of the Port Replicator. ► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly. Fujitsu...
Page 54: Connecting The Ac Adapter To The Port Replicator
Port Replicator of the same type. Switching on the notebook via the port replicator ► Press the ON/OFF button on the port replicator to switch the notebook on. The power-on indicator of the Port Replicator lights up. Fujitsu...
Page 55: Disconnecting The Notebook From The Port Replicator
Working with the notebook Disconnecting the notebook from the Port Replicator ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...
Page 56: Security Functions
► You must install the ﬁngerprint software in order to be able to use the ﬁngerprint sensor (1). The current Workplace Protect software for palm vein and ﬁngerprint sensors can be found on the Internet at http://www.fujitsu.com/us/support/ Fujitsu...
Page 57: Conﬁguring The Palm Vein Sensor
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
Page 58: Conﬁguring Password Protection In Bios Setup Utility
The notebook is then rebooted and the new password comes into effect. It will now be necessary to ﬁrst enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...
Page 59: Password Protection For Booting Of The Operating System
► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...
Page 60: Password Protection For The Hard Disk
► Select the "Security Chip" "Disabled" entry to deactivate the TPM ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...
Page 61: Smartcard Reader
SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.
Page 62: Connecting External Devices
For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...
Page 63: Connecting An External Monitor
"Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. If you wish to operate the monitor via a DVI port, use the optional Port Replicator available for your notebook. Fujitsu...
Page 64: Hdmi Port
The HDMI port on your notebook can be used to connect an external ampliﬁer, LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port of the notebook. Fujitsu...
Page 65: Connecting Usb Devices
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognized and installed by your operating system. Fujitsu...
Page 66: Usb Port With Charging Function (Usb Type-C ™ )
USB devices while the system is running. Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port (USB Type-C ) of the notebook. ™ Fujitsu...
Page 67: Usb Port With Charging Function (Anytime Usb Charge)
► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialog box which tells you that it is now safe to remove the device. Fujitsu...
Page 68: Headset Port
If you buy a cable from a retailer, please note the following information: The headset port on your notebook is a "3.5 mm jack socket". If you want to connect a headset, headphones or loudspeakers, you will need a "3.5 mm jack plug". Fujitsu...
Page 69: Removing And Installing Components During Servicing
The equipment and tools you use must be free of static charges. h power plug from the power outlet before inserting or removing • Remove t e boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards ﬁtted with ESDs. Fujitsu...
Page 70: Preparing To Remove Components
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...
Page 71: Removing A Cover
► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...
Page 72: Installing A Memory Module
► Carefully push the memory module downwards until you feel it click into place (2). Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screw (2). ► Complete the installation, see "Finishing component removal", Page Fujitsu...
Page 73: Installing And Removing An M.2 Module
Removing and installing components during servicing Installing and removing an M.2 module LIFEBOOK U727 and LIFEBOOK U747 are equipped with a compartment for a M.2 module. In LIFEBOOK U757, you can either install a M.2 module (with a corresponding M.2 adapter) or a standard hard disk drive (HDD, without the M.2 adapter), see "Removing...
Page 74: Installing An M.2 Module
► LIFEBOOK U757: If you want to install a HDD instead of a new M.2 module, remove the M.2 adapter (located beneath the M.2 module) from the compartment and install the HDD, "Removing and installing hard disk (HDD, LIFEBOOK U757 only)", Page Fujitsu...
Page 75: Attaching The Cover
Removing and installing components during servicing Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screws (2). Fujitsu...
Page 76: Removing And Installing Hard Disk (Hdd, Lifebook U757 Only)
For easier removal from the device, the hard disk is installed in a hard disk carrier. ► Pull the hard disk in direction of the arrow (1). ► Loosen the connector of the hard disk (2). ► Remove the hard disk from the hard disk compartment. Fujitsu...
Page 77 ► If you want to install a M.2 module instead of a new HDD, disconnect the hard disk cable from the mainboard, insert the M.2 adapter into the compartment and install the M.2 module, see "Installing and removing an M.2 module", Page Fujitsu...
Page 78: Installing A Hard Disk
► Slide the hard disk into the hard disk carrier. ► Attach the connector to the hard disk (2). ► Place the hard disk into the hard disk compartment (3). ► Connect the hard disk cable to the mainboard. ► Re-fasten the cover, see "Attaching the cover", Page Fujitsu...
Page 79: Finishing Component Removal
► Install the battery again (see "Installing a battery", Page 41). ► Turn the notebook the right way up again and place it on a ﬂat surface. ► Reconnect the cables that you disconnected before. Fujitsu...
Page 80: Settings In Bios Setup Utility
► Press the key by itself ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service center The BIOS Setup Utility starts. Fujitsu...
Page 81: Operating Bios Setup Utility
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...
Page 82: Exiting Bios Setup Utility
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...
Page 83: Troubleshooting And Tips
3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be http://www/fujitsu.com/us/support/...
Page 84: Restoring The Hard Disk Contents Under Windows
Hotline/Service Desk. switching on the notebook. When certain characters are entered on the keyboard, only numerals are written Cause Troubleshooting The virtual numeric keypad of your device is ► Press the key. activated, see "Virtual numeric keypad", Page 31 Fujitsu...
Page 85: The Notebook's Lcd Screen Remains Blank
► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu...
Page 86: The External Monitor Is Blank Or The Image Is Unstable
► Charge the battery. ► Insert a charged battery. ► Connect the AC adapter to the notebook. ► Check whether the AC adapter is The power adapter is not connected correctly. connected correctly to the notebook. ► Switch the notebook on. Fujitsu...
Page 87: The Notebook Stops Working
The wireless component is enabled. Despite ► Check whether the wireless connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the wireless component can be found in the help ﬁles. Fujitsu...
Page 88: Acoustic Warnings
Supervisor PIN. SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu...
Page 89: Error Messages On The Screen
Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu...
Page 90 System battery is dead - Replace and run SETUP service center. ► Contact your sales outlet or our customer System cache error - Cache disabled service center. ► Contact your sales outlet or our customer System timer error service center. Fujitsu...
Page 91: Technical Data
Approved memory 4 GByte, 8 GByte or 16 GByte DDR4 - 2133 SO-DIMM modules The data sheet for the device provides further technical data. You will ﬁnd the data sheet on your device or on the Internet at www.fujitsu.com/us. Fujitsu...
Page 92: Rechargeable Battery
Technical data Rechargeable battery You can ﬁnd information on the batteries used in your device on the Internet at www.fujitsu.com/us LIFEBOOK U727: LIFEBOOK U747/U757: 3-cell battery 45Wh 4-cell battery 50 Wh Rated voltage 10.8 V 14.4 V Rated capacity 4170 mAh...
Page 93: Manufacturer's Notes
You can ﬁnd information on this subject on your notebook or on our website http://solutions.us.fujitsu.com/www/content/produts/trade-in_program/ Declarations of Conformity Fujitsu hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Declarationo Fujitsu...
Page 94: Energy Star Compliance
To “wake” the computer from Sleep mode, press the Suspend/Resume Button. Energy saving beneﬁts: Fujitsu ENERGY STAR qualiﬁed mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment.
Page 95: Fcc And Ic Regulatory Information
This device complies with Part 15 of FCC Rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device. Fujitsu...
Page 96 ANSI/IEEE C95.1-1992 and Canada RSS 102, and had been tested in accordance with the measurement methods and procedures speciﬁed in OET Bulletin 65 Supplement C, and Canada RSS 102. This device has been tested, and meets the FCC, IC RF exposure guidelines when tested with the device operating conditions. Fujitsu...
Page 97: Canadian Notice
: (1) cet appareil ne doit pas causer d’interférence nuisible; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvant causer un mauvais fonctionnement de l’appareil. Toute modiﬁcation n’ayant pas été expressément approuvée par la société Fujitsu America Incorporated peut annuler le droit de l’utilisateur de se servir du matériel.
Page 98 (ce qui signiﬁe qu’ils sont prioritaires) des bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz et qu’ils pourraient causer des interférences et/ou des dommages aux appareils de réseau exempts de licence. Fujitsu...
Page 99: Index
Components Fn+F3 33 Fn+F4 33 installing / removing 68 Conﬁguration, BIOS Setup Utility 79 Fn+F5 33 Fn+F6 33 Connecting audio devices 67 Connecting headphones 67 Fn+F7 33 Ctrl+Alt+Del 34 Fn+F8 33 Fn+F9 33 Cursor control 30 Cursor keys 30 Fujitsu...
Page 100 Adding memory 69 cancel system protection 58 AC adapter protecting with password 58 connecting 23 Operating system, restoring 83 setting up 23 Mechanical backup 56 Memory card Packaging 22 handling 43 inserting 43 Palm vein sensor 56 removing 43 Conﬁguring 56 Fujitsu...
Page 101 58 Shift + Tab 34 entering 57 Shift key 30 removing 58 Slot Using the Kensington Lock Cable 56 Memory cards 43 Standby indicator 26 Status indicators 25 VGA connection socket 62 Supervisor password Virtual numeric keypad 31 Fujitsu...
Page 102 33 switch off 33 increase 33 switch on 33 Volume control 44 Wireless LAN Switching the module off 49 Switching the module on 49 Wireless LAN: Webcam 38 safety notes 19 Windows key 30 Wireless component: safety notes 19 Fujitsu...

This manual is also suitable for:

Lifebook u747 Lifebook u757

Fujitsu LIFEBOOK U727 Operating Manual

Innovative Technology

Ports and Controls

Important Notes

First-Time Setup of Your Device

Working with the Notebook

Security Functions

Connecting External Devices

Removing and Installing Components During Servicing

Settings in BIOS Setup Utility

Troubleshooting and Tips

Technical Data

Manufacturer's Notes

Index

Quick Links

Related Manuals for Fujitsu LIFEBOOK U727

Summary of Contents for Fujitsu LIFEBOOK U727

This manual is also suitable for:

Table of Contents