Page 1
WM-FX481 3 7 63 1515 0 SERVICE MANUAL E Model Chinese Model Ver 1.0 2001.04 Model Name Using Similar Mechanism MF-WMFX481-114 (5E, 6E, 9E) MD Mechanism Type MF-WMFX467-114 (CH) • Abbreviation : Chinese SPECIFICATIONS : No Indication of country of origin...
WM-FX481 3 7 63 1515 0 TABLE OF CONTENTS Specifications ................1 Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270°C during 1. GENERAL repairing............... 2 • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
WM-FX481 SECTION 2 3 7 63 1515 0 DISASSEMBLY The equipment can be removed using the following procedure. Mechanism deck Belt, Capstan/reel motor (M601) Cabinet (center) sub ASSY Main board Magnetic head (playback) (HP601) Cabinet (front) Cassette holder Note : Follow the disassembly procedure in the numerical order given.
WM-FX481 3 7 63 1515 0 2-5. CASSETTE HOLDER 2 Move the hinge away from projection Hinge Projection Projection 3 Move the hinge away from projection Hinge Projection Cabinet (center) sub ASSY Projection Hinge Hinge 4 Spring (torsion) Cassette holder...
WM-FX481 SECTION 3 ADJUSTMENTS 3 7 63 1515 0 3-1. MECHANICAL ADJUSTMENTS 3-2. ELECTRICAL ADJUSTMENTS PRECAUTION PRECAUTION 1. Clean the following parts with a denatured-alcohol-moistened • Supplied voltage : 2.5V. swab : • Switch and control position (MENU display)
Page 7
WM-FX481 3 7 63 1515 0 • Repeat the procedures in each adjustment several times, and the TUNER SECTION 0 dB = 1µV frequency coverage and tracking adjustments should be finally AM Section done by the trimmer capacitors. BAND : AM no mark : 10kHz step <...
Page 8
WM-FX481 3 7 63 1515 0 FM VCO Adjustment Procedure : FM RF signal generator 0.01 µ F (FM IN) Carrier frequency : 98MHz 33.75kHz frequency deviation by 1kHz signal. Modulation : L = -R Output level : as low as possible...
WM-FX481 SECTION 4 DIAGRAMS 3 7 6 3 1 5 1 5 0 4-1. EXPLANATION OF IC TERMINALS • Abbreviation : Chinese IC702 LC72348W-CFX1721(5E, 6E) SYSTEM CONTROL : No Indication of country of origin IC702 LC72348W-CFX1726(9E, CH) SYSTEM CONTROL 5E, 6E : Indication of country of origin Pin No.
WM-FX481 4-5. PRINTED WIRING BOARDS – MAIN SECTION (SIDE B) – 3 7 6 3 1 5 1 5 0 DRY BATTERY SIZE "AA" Semiconductor (IEC DESIGNATION R6) Location 2PCS, 3V MAIN BOARD (SIDE B) Ref. No. Location D404...
Page 14
WM-FX481 3 7 6 3 1 5 1 5 0 • IC BLOCK DIAGRAMS Note on Schematic Diagram: MAIN SECTION Waveforms IC1 CXA1960Q • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics 22 21 and tantalums.
WM-FX481 SECTION 5 EXPLODED VIEWS 3 7 63 1515 0 NOTE : • Hardware (# mark) list and accessories and packing • -XX, -X mean standardized parts, so they materials are given in the last of this parts list.
WM-FX481 SECTION 6 MAIN ELECTRICAL PARTS LIST 3 7 63 1515 0 NOTE : • Due to standardization, replacements in the • Items marked “ * ”are not stocked since they When indicating parts by reference num- parts list may be different from the parts are seldom required for routine service.
Page 19
WM-FX481 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R205 1-216-815-11 METAL CHIP 1/16W <VIBRATOR> R206 1-216-831-11 METAL CHIP 6.8K 1/16W X701 1-579-615-11 VIBRATOR, CRYSTAL (75kHz) R207 1-216-864-11 METAL CHIP...
Page 20
WM-FX481 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.