AVH-200EX AVH-201EX DVD RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Contents Video settings ............. 42 Thank you for buying this Pioneer ■ Favorite menu....44 product. ■ Please read through these instructions Other functions ....45 so you will know how to operate your ■ model properly. After you have finished Appendix ......
Precaution Information to user –MODEL NO.: AVH-200EX, AVH-201EX FCC ID: AJDK071 IC: 775E-K071 –This device complies with Part 15 of FCC Rules and Innovation, Science, and Economic Development Canada licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Page 4
CAUTION This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. CLASS 1 LASER PRODUCT CAUTION—CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW...
• If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
If your vehicle has a compliant backup camera that displays the backup view through the factory receiver, do not use the Pioneer receiver unless it is connected to and displays the same view as the factory backup camera. Connection to the factory backup camera will require an adaptor, sold separately.
• To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below.
About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. Meanings of symbols used in this manual This indicates model names that are supported by the described operations. 000EX This indicates to touch the appropriate soft key on the touch screen.
Performs manual seek tuning, fast forwards, reverse and track search controls. Press to answer or end a call. RESET Press to reset the microprocessor (page 11). Refer to Inserting and ejecting a disc (page 25). Disc-loading slot LCD screen Remote Control 201EX Volume (+/-) MODE...
FOLDER/P.CH Press to select the next or previous title or folder. Press to recall radio station frequencies assigned to preset channel keys. Press to answer or end a call. Basic operation Resetting the microprocessor CAUTION • Pressing the RESET button resets settings and recorded contents to the factory settings. –...
WARNING • Do not ingest the battery, Chemical Burn Hazard. (The remote control supplied with) This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
The top menu screen appears. Using the touch panel You can operate this product by touching the keys on the screen directly with your fingers. NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. Common touch panel keys Switches between playback and pause.
Page 14
Appears when all characters are not displayed on the display area. If you touch the key, the rests are scrolled for display. NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. Appears when items cannot be displayed on a single page.
If you select , you can turn off almost all functions. The unit turns on by operating following functions: • An incoming call is received (only for hands-free phoning via Bluetooth). • A rear view camera image is input when the vehicle is in reverse. •...
Page 16
Touch then CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Menu Item Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device.
Page 17
Switching the connected Bluetooth device You can switch among the connected Bluetooth devices using the switch devices key in the Bluetooth menu. • You can register up to three Bluetooth devices on this product (page 15). • The Bluetooth audio player can be switched to other Bluetooth devices on the Bluetooth audio playback screen.
Page 18
Direct phone number input Enter the number keys to enter the phone number then touch to make a call. ▶To end the call Touch Using the preset dial lists ▶Registering a phone number You can easily store up to six phone numbers per device as presets. Press , then touch Touch...
Page 19
Menu Item Description [Auto Answer] Select [On] to answer an incoming call automatically. [On] [Off] [Ring Tone] Select [On] if the ring tone does not come out from the car [On] [Off] speakers. [Invert Name] Select [Yes] to change the order of the first and last names in the phone book.
• With some cellular phones, even after you press the accept button on the cellular phone when a call comes in, hands-free phoning may not be performed. • The registered name will appear if the phone number is already registered in the phone book.
Press Touch [Bluetooth Audio]. The Bluetooth audio playback screen appears. Basic operation Description of Bluetooth audio playback screen Track number indicator Sets a repeat play range. Plays files in random order. Selects a file or folder from the list to playback. NOTE This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher.
Selecting a source Source on the AV source selection screen Press Touch the source icon. When you select , the AV source is turned off. Source on the source list Touch on the AV Source screen. Touch the source key. When you select [Source OFF], the AV source is turned off.
Connecting via Bluetooth The following sources are available when a smartphone is connected to the unit via Bluetooth. • Bluetooth audio Connect a smartphone with this product via Bluetooth (page 15). Press Touch compatible desired source. Radio Starting procedure Press Touch [Radio].
Page 24
Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform, performs non stop seek tuning. Storing the strongest broadcast frequencies (BSM) The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset channel keys [1] to [6].
Disc Inserting and ejecting a disc You can play a normal music CD, Video-CD, or DVD-Video using the built-in drive of this product. CAUTION Do not insert anything other than a disc into the disc-loading slot. Insert the disc Insert a disc into the disc-loading slot. The source changes and then playback will start.
Page 26
Selects a track from the list. Touch a track on the list to play back. Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. Description of Video source screen Touch anywhere on the screen, the touch panel keys appear.
Selects the audio output from [L+R], [Left], [Right], [Mix]. This function is available for Video-CDs and DVDs recorded with LPCM audio. Changes the viewing angle (Multi-angle). This function is available for DVDs featuring multi-angle recordings. Resumes playback (Bookmark). This function is available for DVD-Video. You can memorize one point as a Bookmark for a disc (up to five discs).
Page 28
Plug a USB storage device into the USB cable. Connect the USB cable to the USB port on the rear panel of this product. NOTES • This product may not achieve optimum performance with some USB storage devices. • Connection via a USB hub is not possible. •...
Page 29
When you touch text information, all information is displayed by scrolling only when the parking brake is applied. Sets a repeat play range for all files/the current folder/the current file. NOTE The types of repeat play range depend on the source. Plays files or does not play in random order.
Page 30
Performs frame-by-frame playback. Performs slow-motion playback. Sets a repeat play range for all files/the current folder/the current file. NOTE The types of repeat play range depend on the source. Switches the audio/subtitle language. Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [CD-DA]: Audio data (CD-DA) [Photo]: Image files...
Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [Photo]: Image files Selects a file from the list. Touch a file on the list to playback. Touching a folder on the list shows its contents. You can play a file on the list by touching it.
Page 32
Connect your iPod/iPhone. Press Touch [iPod]. Basic operation Audio source Description of Audio source screen When you touch text information, all information is displayed by scrolling only when the parking brake is applied. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly.
NOTE This function is only available when using the iPod function with an iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5, iPhone 5c, iPhone 4s or iPod touch (5th, 6th generation).
Basic operation Description of AUX screen TIPS • Touch anywhere on the screen, the touch panel keys appear. • You can set the screen size for the video image (page 45). Switches between the video input and audio input. Settings You can adjust various settings in the main menu.
(page 35). CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the shift lever is moved to REVERSE (R) from another position.
Page 36
[System Language] Menu Item Description [System Language] Select the system language. NOTES • If the embedded language and the selected language setting are not the same, the text information may not display properly. • Some characters may not be displayed properly. [Restore Settings] Menu Item Description...
Page 37
Menu Item Description [Touch Panel Calibration] Touch [Yes]. Touch four corners of the screen along the arrows. Press The adjustment results are saved. Press once again. Proceed to 16-point adjustment. Gently touch the center of the [+] mark displayed on the screen.
Page 38
Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching You can use this function when [Dimmer Trigger] is set to [Time]. TIPS • Each touch of moves the cursor backward or forward in the 15 minute width.
* With some pictures, you cannot adjust [Hue] and [Color]. NOTES • The adjustments of [Brightness], [Contrast], and [Dimmer] are stored separately when your vehicle's headlights are off (daytime) and on (nighttime). • [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer Settings].
Page 40
Menu Item Description [Graphic EQ] Select or customize the equalizer curve. [Super Bass] [Powerful] Select a curve that you want to use as the basis of customizing [Natural] [Vocal] [Flat] then touch the frequency that you want to adjust. [Custom1] [Custom2] TIPS •...
Page 41
Menu Item Description [Speaker Level] Adjust the speaker output level of the listening position. [Front Left] [Front Right] Touch to select the listening position then [Rear Left] [Rear Right] select the output speaker. [Subwoofer] [Listening Touch to adjust the selected speaker output Position] level.
NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. Press Touch then Touch [Crossover] or [Subwoofer Settings]. Touch to switch the speaker. Touch to set the cutoff position. Touch to set the cutoff slope. The following items can also be set. Switches the subwoofer phase between normal and reverse position.
Page 43
Menu Item Description [Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. Touch [0] to [9] to input a four-digit code number. Touch Registers the code number, and you can now set the level.
[Video Signal Setting] Menu Item Description [AUX] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] [PAL- this product to an AUX equipment. M] [PAL-N] [SECAM] [Camera] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] [PAL- this product to a rear view camera.
Other functions Setting the time and date Touch the current time on the screen. Touch to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. •...
The screen is covered by a caution authorized Pioneer service facility. message and the video cannot be shown. → The parking brake lead is not connected Common problems or the parking brake is not applied.
If the error persists, then turn off the ignition switch (ACC record the error message and contact your OFF). Subsequently, turn the ignition dealer or your nearest Pioneer service switch to on (ACC ON) again. center. – Update the iPod software version.
Page 48
– Change to a different source. Then, the engine is switched off/on, contact return to the USB storage device. your dealer or an authorized Pioneer Skipped Service Station for assistance. → The connected USB storage device contains DRM protected files.
• Despite our careful design of the product, Handling and care of small scratches that do not affect actual discs operation may appear on the disc surface as a result of mechanical wear, ambient conditions for use or handling of the disc. Some basic precautions are necessary This is not a sign of the malfunction of when handling your discs.
Page 50
Detailed information Playing DualDisc for playable media • DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other. • Playback of the DVD side is possible with Compatibility this product.
Page 51
characteristics, scratches or dirt on the • You cannot connect a USB storage device disc, or dirt, scratches or condensation on to this product via a USB hub. the lens of the built-in drive. • Partitioned USB storage device is not •...
Page 52
DivX subtitle files • Maximum playback time of audio file stored on an USB storage device: 7.5 h • Srt format subtitle files with the (450 minutes) extension “.srt” can be used. • Only one subtitle file can be used for each CD-R/-RW DivX file.
Page 54
This unit plays back AAC files encoded by iTunes. Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other - 54 -...
Page 55
Cisco holds the trademark right in the US and certain devices other countries. • Pioneer accepts no responsibility for data iTunes lost from an iPod, even if that data is lost while using this product. Please back up iTunes is a trademark of Apple Inc.,...
Page 56
any right to use this product in any Liquid crystal display (LCD) commercial (i.e. revenue-generating) real screen time broadcasting (terrestrial, satellite, cable and/or any other media), • If the LCD screen is near the vent of an air broadcasting/streaming via internet, conditioner, make sure that air from the intranets and/or other networks or in other air conditioner is not blowing on it.
22 W × 4 (50 Hz to 15 kHz, 5 %THD, 4 Ω visible. In that case, please consult your LOAD, Both Channels Driven) dealer or the nearest authorized Pioneer Load impedance: Service Station. 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable) Preout output level (max): 2.0 V...
Page 59
AM tuner Frequency range: 530 kHz to 1 710 kHz Usable sensitivity: 28 μV (S/N: 20 dB) Signal-to-noise ratio: 62 dB (IEC-A network) CEA2006 Specifications Power output: < = 14 W RMS × 4 Channels (4 Ω and THD+N) S/N ratio: 91 dBA (reference: 1 W into 4 Ω) NOTE Specifications and design are subject to possible...