Table of Contents
Advertisement
38
Auto-Run
Date setting
Auto-Run
SoundPro SE/DL has four automatic run modes which include: Date auto-
start with duration, Day of the Week auto-start with duration, Timed Run
(duration only setting), and Level Triggered Runs (or Level auto-start runs).
Setting up auto-run
All Auto-Run setups begin in the Auto-Run screen. The Auto-Run screen
shows the current status of the Auto-Run feature. The following features are
available: Disabled, Timed Run, DOW (day of week), Date, and Level-
Triggered settings.
Date setting
A Date mode run wakes up the instrument from a powered down condition,
runs the study, saves it, then powers down again and is only executable
once. The parameters are selectable by specified dates and times with up to
four programmable individual setups.
A plus sign preceding a number (i.e., +1) indicates if one of the four settings
is enabled (or activated) where as a negative sign (i.e. -4) represents a
disabled (or deactivated) setting.
Setting up or changing auto-run with date parameter
1. From the start screen, press Up/Down
Enter
2. Select Auto-Run by using Up/Down
to select.
3. In the Auto-Run screen, repeatedly press Enter
4. To select View/Set Parameters, press the Down arrow to highlight and
press Enter
.
Figure 4-1: Auto-Run with Date selected
.
to highlight Setup and press
to highlight and press Enter
until Date appears.
Date setting
View/Set Parameters – when
selected a new menu appears
Models SE and DL
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
