hit counter script
Dell Inspiron One 2330 Owner's Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Desktop
  5. Inspiron One 2330
  6. Owner's manual

Dell Inspiron One 2330 Owner's Manual

Hide thumbs Also See for Inspiron One 2330:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
Dell Inspiron One 2330
Owner's Manual
Computer model: Inspiron One 2330
Regulatory model: W05C
Regulatory type: W05C001

Advertisement

Table of Contents
loading

Related Manuals for Dell Inspiron One 2330

Summary of Contents for Dell Inspiron One 2330

  • Page 1 Dell Inspiron One 2330 Owner’s Manual Computer model: Inspiron One 2330 Regulatory model: W05C Regulatory type: W05C001...
  • Page 2 ® trademarks of Microsoft corporation in the United States and/or other countries; Bluetooth is a ® registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license; Intel and Intel ® SpeedStep are registered trademarks of Intel Corporation in the U.S. and/or other countries.

  • Page 3: Table Of Contents

    Contents Before You Begin ....Turn Off Your Computer and Connected Devices ..Safety Instructions ....Recommended Tools .
  • Page 4 Touchscreen Board ....Removing the Touchscreen Board ... . Replacing the Touchscreen Board ... . Converter Board .
  • Page 5 11 VESA-Mount Bracket ....Removing the VESA-Mount Bracket ... Replacing the VESA-Mount Bracket ..12 Hard Drive .
  • Page 6 16 Processor Heat-Sink ....Removing the Processor Heat-Sink ... Replacing the Processor Heat-Sink ... 17 Processor Heat-Sink Fan .
  • Page 7 21 I/O Board Shield ....Removing the I/O Board Shield ... . . Replacing the I/O Board Shield .
  • Page 8 Replacing the System Board ....Entering the Service Tag in the BIOS ..27 Antenna Module(s) ....Removing the Antenna Module(s) .

  • Page 9: Before You Begin

    Before You Begin Turn Off Your Computer and Connected Devices CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer. 1 Save and close all open files and exit all open programs. 2 Follow the instructions to shut down your computer based on the operating system installed on your computer.

  • Page 10: Safety Instructions

    WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the computer, replace all covers, panels, and screws before connecting to the power source.

  • Page 11: After Working Inside Your Computer

    After Working Inside Your Computer After you complete the replacement procedures, ensure the following: • Replace all screws and ensure that no stray screws remain inside your computer. • Connect any external devices, cables, cards, and any other part(s) you removed before working on your computer. •...
  • Page 12 After Working Inside Your Computer...

  • Page 13: Technical Overview

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Inside View of Your Computer touchscreen-board shield...

  • Page 14: System Board Components

    wireless Mini-Card system board speakers (2) I/O cover I/O board shield power-supply fan power-button board converter board System Board Components Technical Overview...
  • Page 15 camera cable connector (WEBCAM) battery socket (BAT1) processor socket (PROCESSOR) memory-module connector (CHANNEL A DIMM 1) memory-module connector CMOS reset jumper (SW50) (CHANNEL A DIMM 0) left speaker cable connector right speaker cable connector (LINE_OUT) (LINE_OUT) password reset jumper (E49) SPI connector (E16) processor heat-sink fan cable power-button board cable connector...
  • Page 16 Technical Overview...

  • Page 17: Stand

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Stand Procedure...
  • Page 18 3 Slide and lift the stand cover off your computer. 4 Remove the screws that secure the stand to your computer. 5 Pivot the stand upward and remove the stand off your computer. screws (4) stand Stand...

  • Page 19: Replacing The Stand

    Replacing the Stand Procedure 1 Align the screw holes on the stand with the screw holes on your computer. 2 Replace the screws that secure the stand to your computer. 3 Slide the stand cover and snap it into place. 4 Follow the instructions in "After Working Inside Your Computer"...
  • Page 20 Stand...

  • Page 21: Back Cover

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Back Cover Prerequisites 1 Remove the stand.

  • Page 22: Replacing The Back Cover

    Replacing the Back Cover Procedure 1 Place the back cover on your computer and snap it into place. 2 Ensure that the screw holes on the back cover align with the screw holes on the middle frame. 3 Replace the screws that secure the back cover to your computer. Postrequisites 1 Replace the stand.

  • Page 23: Touchscreen Board

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Touchscreen Board Prerequisites 1 Remove the stand.
  • Page 24 2 Disconnect the system-board cable from the touchscreen-board. 3 Lift the connector latches and disconnect the touchscreen-board cables from the touchscreen board. connectors (4) system-board cable touchscreen-board cables (4) Touchscreen Board...
  • Page 25 4 Remove the screws that secure the touchscreen board to the chassis. 5 Lift the touchscreen board off the chassis. screws (2) touchscreen board Touchscreen Board...

  • Page 26: Replacing The Touchscreen Board

    Replacing the Touchscreen Board Procedure 1 Align the screw holes on the touchscreen board with the screw holes on the chassis. 2 Replace the screws that secure the touchscreen board to the chassis. 3 Connect all the touchscreen-board cables to the connectors on the touchscreen board and secure the latches.

  • Page 27: Converter Board

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Converter Board Prerequisites 1 Remove the stand.
  • Page 28 Procedure 1 Disconnect the converter-board cable and display-backlight cable from the connectors on the convertor board. 2 Remove the screws that secure the converter board to the chassis. 3 Remove the converter board off the chassis. display-backlight cable converter board screws (2) converter-board cable Converter Board...

  • Page 29: Replacing The Converter Board

    Replacing the Converter Board Procedure 1 Align the screw holes on the converter board with the screw holes on the chassis. 2 Replace the screws that secure the converter board to the chassis. 3 Connect the converter-board cable and display-backlight cable to the connectors on the convertor board.
  • Page 30 Converter Board...

  • Page 31: Power-Button Board

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Power-Button Board Prerequisites 1 Remove the stand.

  • Page 32: Replacing The Power-Button Board

    Replacing the Power-Button Board Procedure 1 Connect the power-button board cable to the connector on the power-button board. 2 Slide the power-button board into slot on the middle frame. Postrequisites 1 Replace the back cover. See "Replacing the Back Cover" on page 22. 2 Replace the stand.

  • Page 33: Memory Module(S)

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Memory Module(s) Prerequisites 1 Remove the stand.
  • Page 34 2 Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up. 3 Remove the memory module from the memory-module connector. securing clips (2) memory-module connector memory module Memory Module(s)

  • Page 35: Replacing The Memory Module(S)

    Replacing the Memory Module(s) Procedure 1 Align the notch on the memory module with the tab on the memory-module connector. 2 Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.
  • Page 36 Memory Module(s)

  • Page 37: Optical Drive

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Optical Drive Prerequisites 1 Remove the stand.
  • Page 38 Procedure 1 Disconnect the power and data cable from the connector on the optical drive. 2 Remove the screws that secure the optical drive to the chassis. 3 Slide the optical drive and remove it off the chassis. optical drive screws (2) power and data cable 4 Remove the screws that secure the optical-drive bracket to...
  • Page 39 6 Pivot the optical-drive bezel upward to release it from the optical drive. 7 Remove the optical-drive bezel from the optical drive. optical-drive bezel optical-drive bracket screws (2) Optical Drive...

  • Page 40: Replacing The Optical Drive

    Replacing the Optical Drive Procedure 1 Align the optical-drive bezel with the optical drive and snap it into place. 2 Align the screw holes on the optical-drive bracket with the screw holes on the optical drive. 3 Replace the screws that secure the optical-drive bracket to the optical drive.

  • Page 41: Vesa-Mount Bracket

    "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. NOTE: The dimensions of the VESA-mount bracket on your computer is 100 x 100 mm.

  • Page 42: Replacing The Vesa-Mount Bracket

    Replacing the VESA-Mount Bracket Procedure 1 Align the screw holes on the VESA-mount bracket with the screw holes on the chassis. 2 Replace the screws that secure the VESA-mount bracket to the chassis. Postrequisites 1 Replace the back cover. See "Replacing the Back Cover" on page 22. 2 Replace the stand.

  • Page 43: Hard Drive

    "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. CAUTION: To avoid data loss, do not remove the hard drive while the computer is On or in Sleep state.
  • Page 44 Procedure 1 Remove the optical drive's power and data cable from the routing guides on the hard-drive cage. 2 Disconnect the power and data cable from the connector on the hard drive. 3 Remove the power-supply cable from the routing guide on the hard drive cage.
  • Page 45 6 Remove the screws that secure the hard-drive cage to the hard drive. 7 Slide the hard drive out of the hard-drive cage. hard drive screws (4) hard-drive cage Hard Drive...

  • Page 46: Replacing The Hard Drive

    Replacing the Hard Drive Procedure 1 Slide the hard drive into the hard-drive cage. 2 Align the screw holes on the hard-drive cage with the screw holes on the hard drive. 3 Replace the screws that secure the hard-drive cage to the hard drive. 4 Place the hard-drive cage on the chassis and slide it toward the bottom of your computer.

  • Page 47: System-Board Shield

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the System-Board Shield Prerequisites 1 Remove the stand.
  • Page 48 Procedure 1 Remove the screws that secure the system-board shield to the chassis. 2 Turn the system-board shield to the side of your computer and then release the system-board shield off the chassis. system-board shield screws (4) System-Board Shield...

  • Page 49: Replacing The System-Board Shield

    Replacing the System-Board Shield Procedure 1 Align the screw holes on the system-board shield with the screw holes on the chassis. 2 Replace the screws that secure the system-board shield to the chassis. Postrequisites 1 Replace the VESA-mount bracket. See "Replacing the VESA-Mount Bracket" on page 42. 2 Replace the back cover.
  • Page 50 System-Board Shield...

  • Page 51: Wireless Mini-Card

    For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. NOTE: Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell. If you ordered a wireless Mini-Card with your computer, the card is already installed.
  • Page 52 Procedure 1 Disconnect the antenna cables from the connectors on the Mini-Card 2 Remove the screws that secure the Mini-Card to the system-board connector. screws (2) antenna cables (2) 3 Slide and remove the Mini-Card out of the system-board connector. system-board connector Mini-Card Wireless Mini-Card...

  • Page 53: Replacing The Wireless Mini-Card

    Replacing the Wireless Mini-Card Procedure 1 Align the notch on the Mini-Card with the tab on the system-board connector. CAUTION: Use firm and even pressure to slide the Mini-Card into place. If you use excessive force, you may damage the connector. CAUTION: The connectors are keyed to ensure correct insertion.
  • Page 54 Postrequisites 1 Replace the system-board shield. See "Replacing the System-Board Shield" on page 49. 2 Replace the VESA-mount bracket. See "Replacing the VESA-Mount Bracket" on page 42. 3 Replace the back cover. See "Replacing the Back Cover" on page 22. 4 Replace the stand.

  • Page 55: Speakers

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Speakers Prerequisites 1 Remove the stand.
  • Page 56 Procedure 1 Disconnect the left and right speaker cables from the system-board connectors. 2 Remove the speaker cables from the routing guides on the chassis. 3 Remove the screws that secure the speakers to the chassis. 4 Lift the speakers off the chassis. screws (4) speakers (2) right-speaker cable connector...

  • Page 57: Replacing The Speakers

    Replacing the Speakers Procedure 1 Align the screw holes on the speakers with the screw holes on the chassis. 2 Replace the screws that secure the speakers to the chassis. 3 Route the speaker cables through the routing guides on the chassis. 4 Connect the left and right speaker cables to the system-board connectors.
  • Page 58 Speakers...

  • Page 59: Processor Heat-Sink

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Processor Heat-Sink Prerequisites 1 Remove the stand.
  • Page 60 Procedure 1 Remove the screw that secures the processor heat-sink to the chassis. 2 In sequential order (indicated on the processor heat-sink), loosen the captive screws that secure the processor heat-sink to the system board. 3 Peel the portion of the aluminum foil that is adhered over the processor heat-sink fan.

  • Page 61: Replacing The Processor Heat-Sink

    Replacing the Processor Heat-Sink Procedure NOTE: The original thermal grease can be reused, if the original system board and heat sink are reinstalled together. If either the system board or the heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.
  • Page 62 Processor Heat-Sink...

  • Page 63: Processor Heat-Sink Fan

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Processor Heat-Sink Fan Prerequisites 1 Remove the stand.
  • Page 64 Procedure 1 Disconnect the processor heat-sink fan cable from the system-board connector. 2 Remove the screws that secure the processor heat-sink fan to the chassis. 3 Peel the portion of the aluminum foil that is adhered over the processor heat-sink. 4 Lift the processor heat-sink fan off the chassis aluminum foil processor heat-sink fan...

  • Page 65: Replacing The Processor Heat-Sink Fan

    Replacing the Processor Heat-Sink Fan Procedure 1 Align the screw holes on the processor heat-sink fan with the screw holes on the chassis. 2 Replace the screws that secure the processor heat-sink fan to the chassis. 3 Connect the processor heat-sink fan cable to the system-board connector. 4 Adhere the aluminum foil on the processor heat-sink fan over the processor heat-sink.
  • Page 66 Processor Heat-Sink Fan...

  • Page 67: Processor

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Processor Prerequisites 1 Remove the stand.
  • Page 68 Procedure 1 Press the release lever down on the processor cover and then pull it outwards to release it from the tab that secures it. 2 Extend the release lever completely to open the processor cover. Leave the release lever extended in the release position so that the socket is ready for the new processor.

  • Page 69: Replacing The Processor

    Replacing the Processor Procedure 1 Unpack the new processor, being careful not to touch the underside of the processor. CAUTION: Ground yourself by touching an unpainted metal surface. CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor.
  • Page 70 7 Clean the thermal grease from the bottom of the heat sink. 8 Apply the new thermal grease to the top of the processor. CAUTION: Ensure that you apply new thermal grease. The new thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation.

  • Page 71: Power-Supply Fan Bracket

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Power-Supply Fan Bracket Prerequisites 1 Remove the stand.
  • Page 72 Procedure 1 Remove the screw that secures the power-supply fan bracket to the chassis. 2 Lift the power-supply fan bracket off the chassis. screw power-supply fan bracket Power-Supply Fan Bracket...

  • Page 73: Replacing The Power-Supply Fan Bracket

    Replacing the Power-Supply Fan Bracket Procedure 1 Align the screw hole on the power-supply fan bracket with the screw hole on the chassis. 2 Replace the screw that secures the power-supply fan bracket to the chassis. Postrequisites 1 Replace the back cover. See "Replacing the Back Cover" on page 22. 2 Replace the stand.
  • Page 74 Power-Supply Fan Bracket...

  • Page 75: O Cover

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the I/O Cover Prerequisites 1 Remove the stand.
  • Page 76 Procedure Gently lift the I/O cover to release it from the tabs that secure it to the chassis. I/O cover I/O Cover...

  • Page 77: Replacing The I/O Cover

    Replacing the I/O Cover Procedure Place the I/O cover over the I/O board shield and snap it into position. Postrequisites 1 Replace the back cover. See "Replacing the Back Cover" on page 22. 2 Replace the stand. See "Replacing the Stand" on page 19. 3 Follow the instructions in "After Working Inside Your Computer"...
  • Page 78 I/O Cover...

  • Page 79: O Board Shield

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the I/O Board Shield Prerequisites 1 Remove the stand.
  • Page 80 Procedure 1 Remove the screws that secure the power port to the I/O board shield. 2 Remove the screw that secures the power supply control board to the I/O board shield. 3 Remove the screws that secure the I/O board shield to the chassis. 4 Turn the I/O board shield over and place it on the hard-drive cage.
  • Page 81 5 Slide the power port and power-supply control board through the slot on the I/O board shield. 6 Disconnect the power-supply fan cable from the system-board connectors. 7 Lift the I/O board shield off the chassis. I/O board shield power-supply fan cable I/O Board Shield...

  • Page 82: Replacing The I/O Board Shield

    Replacing the I/O Board Shield Procedure 1 Connect the power-supply fan cable to the system-board connectors. 2 Slide the power port and the power-supply control board through the slot on the I/O board shield. 3 Align the screw holes on the I/O board shield with the screw holes on the chassis.

  • Page 83: Power-Supply Unit

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Power-Supply Unit Prerequisites 1 Remove the stand.
  • Page 84 Procedure 1 Disconnect the main power cable and processor power cable from the connectors on the system board. 2 Remove the main power cable and processor power cable from the routing guides on the chassis. 3 Remove the power-supply port cable from the routing guides on the chassis.

  • Page 85: Replacing The Power-Supply Unit

    Replacing the Power-Supply Unit Procedure 1 Align the screw holes on the power-supply unit with the screw holes on the chassis. 2 Replace the screws that secure the power-supply unit to the chassis. 3 Route the power-supply port cable through the routing guides on the chassis.
  • Page 86 Power-Supply Unit...

  • Page 87: Power-Supply Fan

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Power-Supply Fan Prerequisites 1 Remove the stand.
  • Page 88 Procedure 1 Remove the screws that secure the power-supply fan to the I/O board shield. 2 Lift the power-supply fan off the I/O board shield. power-supply fan screws (2) Power-Supply Fan...

  • Page 89: Replacing The Power-Supply Fan

    Replacing the Power-Supply Fan Procedure 1 Align the screw holes on the power-supply fan with the screw holes on the I/O board shield. 2 Replace the screws that secure the power-supply fan to the I/O board shield. Postrequisites 1 Replace the I/O board shield. See "Replacing the I/O Board Shield"...
  • Page 90 Power-Supply Fan...

  • Page 91: O Board

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the I/O Board Prerequisites 1 Remove the stand.
  • Page 92 Procedure 1 Disconnect the main power cable from the system-board connector and move it away from the I/O board. 2 Remove the screw that secures the grounding cable to the chassis. 3 Disconnect the display cable and AV-in cable from the connectors on the I/O board.
  • Page 93 4 Remove the screws that secure the I/O board to the chassis. 5 Lift the I/O board off the chassis. I/O board screws (5) I/O Board...

  • Page 94: Replacing The I/O Board

    Replacing the I/O Board Procedure 1 Align the screw holes on the I/O board with the screw holes on the chassis. 2 Replace the screws that secure the I/O board to chassis. 3 Connect the display cable and AV-in cable to the connectors on the I/O board.

  • Page 95: Coin-Cell Battery

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: The battery may explode if installed incorrectly. Replace the battery only with the same or equivalent type.
  • Page 96 Procedure Using a plastic scribe, gently pry out the coin-cell battery from the battery socket on the system board. coin-cell battery plastic scribe Coin-Cell Battery...

  • Page 97: Replacing The Coin-Cell Battery

    Replacing the Coin-Cell Battery Procedure With the positive-side facing up, snap the coin-cell battery into the battery socket on the system board. Postrequisites 1 Replace the system-board shield. See "Replacing the System-Board Shield" on page 49. 2 Replace the VESA-mount bracket. See "Replacing the VESA-Mount Bracket"...
  • Page 98 Coin-Cell Battery...

  • Page 99: System Board

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the System Board NOTE: Your computer’s Service Tag is stored in the system board.
  • Page 100 11 Remove the processor. See "Removing the Processor" on page 67. 12 Remove the wireless mini-card. See "Removing the Wireless Mini-Card" on page 51. Procedure 1 Disconnect all the cables from the system-board connectors. 2 Remove the screws that secure the system board to the chassis. 3 Gently lift the system board to the side of your computer and remove the system board off the chassis.

  • Page 101: Replacing The System Board

    Replacing the System Board Procedure 1 Align the screw holes on the system board with the screw holes on the chassis. 2 Replace the screws that secure the system board to the chassis. 3 Connect all the cables to the system-board connectors. Postrequisites 1 Replace the wireless mini-card.

  • Page 102: Entering The Service Tag In The Bios

    Entering the Service Tag in the BIOS 1 Turn on the computer. 2 Press <F2> during POST to enter the system setup program. 3 Navigate to the main tab and enter the Service Tag in the Service Tag Setting field. System Board...

  • Page 103: Antenna Module(S)

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Antenna Module(s) Prerequisites 1 Remove the stand.
  • Page 104 13 Remove the I/O board shield. See "Removing the I/O Board Shield" on page 79. 14 Follow the instructions from step 1 to step 3 in "Removing the System Board" on page 99. Antenna Module(s)
  • Page 105 Procedure 1 Remove the screws that secure the antenna modules to the chassis. 2 Make a note of the antenna-cable routing and remove the antenna cables from the routing guides on the chassis. 3 Lift the antenna modules off the chassis. antenna modules (2) screws (4) antenna cable routing...

  • Page 106: Replacing The Antenna Module(S)

    Replacing the Antenna Module(s) Procedure 1 Align the screw holes on the antenna modules with the screw holes on the chassis. 2 Replace the screws that secure the antenna modules to the chassis. 3 Route the antenna cables through the routing guides on the chassis. Postrequisites 1 Follow the instructions from step 1 to step 3 in "Replacing the System Board"...
  • Page 107 14 Replace the stand. See "Replacing the Stand" on page 19. 15 Follow the instructions in "After Working Inside Your Computer" on page 11. Antenna Module(s)
  • Page 108 Antenna Module(s)

  • Page 109: Display Panel

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Display Panel Prerequisites 1 Remove the stand.
  • Page 110 13 Remove the I/O cover. See "Removing the I/O Cover" on page 75. 14 Remove the I/O board shield. See "Removing the I/O Board Shield" on page 79. 15 Remove the power-supply unit. See "Removing the Power-Supply Unit" on page 83. 16 Remove the speakers.
  • Page 111 Procedure 1 Press the release latches on each side of the display cable, and then pull the cable to disconnect it from the connector on the display panel. release latches (2) display cable Display Panel...
  • Page 112 2 Remove the screws that secure the chassis to the middle frame. 3 Release the touchscreen-board cables from chassis. 4 Lift the chassis off the middle frame. touchscreen-board cables screws (20) chassis middle frame Display Panel...
  • Page 113 5 Peel the tape adhered over the connectors. 6 Lift the connector latch and disconnect the touchscreen-board cables. touchscreen-board cables (4) connectors (4) connector latch (4) tape (2) Display Panel...
  • Page 114 7 Remove the screws that secure the display assembly to the middle frame. 8 Gently lift the display assembly off the middle frame. display assembly screws (4) middle frame Display Panel...
  • Page 115 9 Remove the screws that secure the display brackets to the display panel. 10 Remove the display brackets off the display panel. display panel screws (4) display brackets (2) Display Panel...

  • Page 116: Replacing The Display Panel

    Replacing the Display Panel Procedure 1 Align the screw holes on the display brackets with the screw holes on the display panel. 2 Replace the screws that secure the display brackets to the display panel. 3 Gently place the display panel over the middle frame. 4 Replace the screws that secure the display assembly to the middle frame.
  • Page 117 9 Replace the power-supply fan bracket. See "Replacing the Power-Supply Fan Bracket" on page 73. 10 Replace the wireless mini-card. See "Replacing the Wireless Mini-Card" on page 53. 11 Replace the memory modules. See "Replacing the Memory Module(s)" on page 35. 12 Replace the system-board shield.
  • Page 118 Display Panel...

  • Page 119: Camera Module

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Removing the Camera Module Prerequisites 1 Remove the stand.
  • Page 120 13 Remove the I/O cover. See "Removing the I/O Cover" on page 75. 14 Remove the I/O board shield. See "Removing the I/O Board Shield" on page 79. 15 Remove the power-supply unit. See "Removing the Power-Supply Unit" on page 83. 16 Remove the speakers.
  • Page 121 Procedure 1 Disconnect the camera cable from the connector on the camera module. 2 Remove the screws that secure the camera module to the middle frame. 3 Lift the camera module off the middle frame. middle frame camera cable screws (2) Camera Module...

  • Page 122: Replacing The Camera Module

    Replacing the Camera Module Procedure 1 Align the screw holes on the camera module with the screw holes on the middle frame. 2 Replace the screws that secure the camera module to the middle frame. 3 Connect the camera cable to the connector on the camera module. Postrequisites 1 Replace the display panel.
  • Page 123 14 Follow the instructions from step 4 to step 8 in "Replacing the Hard Drive" on page 46. 15 Replace the VESA-mount bracket. See "Replacing the VESA-Mount Bracket" on page 42. 16 Replace converter board. See "Replacing the Converter Board" on page 29. 17 Replace power-button board.
  • Page 124 Camera Module...

  • Page 125: System Setup

    Entering System Setup 1 Turn on (or restart) your computer. 2 During POST, when the DELL logo is displayed, watch for the F2 prompt to appear and then press <F2> immediately. NOTE: The F2 prompt indicates that the keyboard has initialized.

  • Page 126: System Setup Screens

    System Setup Screens The system setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into three areas: the setup item, active help screen, and key functions. Setup Item — This field appears on Help Screen —...
  • Page 127 Main — Processor Information Displays the processor type Processor Type Displays the processor ID Processor ID Displays the number of processor core(s) Processor Core Count Displays the processor L1 cache size Processor L1 Cache Displays the processor L2 cache size Processor L2 Cache Displays the processor L3 cache size Processor L3 Cache...
  • Page 128 Advanced — CPU Feature Allows you to enable or disable the Intel SpeedStep Intel(R) SpeedStep feature for the processor Technology Enabled or Disabled (Enabled by default) Allows you to enable or disable the Intel(R) Intel virtualization feature for the processor Virtualization Technology Enabled or Disabled (Enabled by default)
  • Page 129 Advanced — Onboard Device Configuration Allows you to enable or disabled the Onboard Audio audio controller Controller Enabled or Disable (Enabled by default) Allows you to configure the operating mode of the SATA Mode integrated hard-drive controller ATA Mode; AHCI Mode (AHCI Mode by default) CAUTION: Changing the SATA Mode may prevent booting of your operating system.
  • Page 130 (continued) Power Allows you to set the computer to turn on Auto Power On automatically every day or on a preselected date; Mode This option can be configured only if the Auto Power On mode is set to Enabled Everyday or Selected Day (Selected Day by default) Allows you to set the date on which the computer Auto Power On must turn on automatically;...
  • Page 131 (continued) Security Allows you to set, change, or delete the Set User Password user password Allows you to enable password verification either Password Check when you attempt to enter system setup or each time the computer boots Setup or Always (Setup by default) Boot Allows you to set the status of the Num Lock key Numlock Key...
  • Page 132 Exit Save Changes and Reset Allows you to save changes and exit system setup Allows you to discard changes and exit system setup Discard Changes and Reset Allows you to restore the default settings Load Default Boot Sequence This feature allows you to change the boot sequence for devices. Boot Options •...
  • Page 133 Changing Boot Sequence for the Current Boot You can use this feature to change the current boot sequence, for example, to boot from the optical drive to run Dell Diagnostics from the Drivers and Utilities disc. The previous boot sequence is restored at the next boot.

  • Page 134: Clearing Forgotten Passwords

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: The computer must be disconnected from the electrical outlet to clear the CMOS setting.
  • Page 135 11 Replace the back cover. See "Replacing the Back Cover" on page 22. 12 Replace the stand. See "Replacing the Stand" on page 19. 13 Follow the steps in "After Working Inside Your Computer" on page 11. System Setup...

  • Page 136: Clearing Cmos Settings

    Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: The computer must be disconnected from the electrical outlet to clear the CMOS setting.
  • Page 137 12 Replace the stand. See "Replacing the Stand" on page 19. 13 Follow the steps in "After Working Inside Your Computer" on page 11. System Setup...
  • Page 138 System Setup...

  • Page 139: Flashing The Bios

    • Choose from My Products and Services List • Choose from a list of all Dell products Click Continue and follow the instructions on the screen. 4 A list of results appears on the screen. Click BIOS. 5 Click Download File to download the latest BIOS file.
  • Page 140 9 Navigate to the folder where you downloaded the BIOS update file. The file icon appears in the folder and is titled the same as the downloaded BIOS update file. 10 Double-click the BIOS update file icon and follow the instructions that appear on the screen.

Table of Contents