hit counter script
Download Print this page
Sanyo VCB-3384 Instruction Manual

Sanyo VCB-3384 Instruction Manual

B/w ccd camera

Advertisement

Quick Links

VCB-3384
INSTRUCTION MANUAL
(Warranty attached)
B/W CCD camera
About this manual
Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.
Features
Backlight compensation
1/3-inch CCD solid-state image device (about 410,000
pixels)
Horizontal resolution of 570 TV lines, S/N ratio of 50 dB min.
Minimum required illumination of 0.07 lx (F1.2 lens, 50 IRE)
High speed electronic shutter: 1/60 – 1/100,000 sec.
Power supply: 24 V AC and 12 – 15 V DC
Depending on the conditions of use, installation and environment,
please be sure to make the appropriate settings and adjustments.
If you need help with installation and/or settings, please consult
your dealer.

NAMES AND FUNCTIONS OF PARTS

1
2
3
<Figure 1. Right view:>
<Figure 3. Rear view:>
7
8
4
5
<Figure 2. Left view:>
6
1
3
3
2
1 4
<Figure 1. Right view:>
1 Lens cap
Protects the lens from damage.
2 Flange-back adjustment dial
Adjusts the flange-back distance when a zoom lens is attached.
3 Camera adjustment/setting panel
Contains camera adjustment dials and setting switches.
4 LOCK
Locking screw for the flange-back adjustment dial.
5 Camera attachment bracket
Used to attach the camera.

INFORMATION TO USER

Safety Guard
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THIS UNIT.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour la clientèle canadienne
Cet appareil numerique de la Classe B est conforme à la norme NMB-003 du
Canada.
This installation should be made by a qualified service person and should conform to
all local codes.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by Sanyo may void the user's
authority to operate this camera.
<Figure 2. Left view:>
6 LENS (lens iris output terminal)
Used to connect the lens plug when the lens is attached.
F
1Brake coil (–)
2Brake coil (+)
3Drive coil (+)
4Drive coil (–)
9
<Figure 3. Rear view:>
7 VIDEO OUT (video output terminal: BNC connector)
Connects to the VIDEO IN (video input) terminal on the peripheral
equipment.
8 POWER (power indicator)
Lights (red) when the camera power is ON.
9 GND, AC24V, DC12V (ground terminal, 24 V AC or
12 V DC input terminal)
F VS IN (External sync composite video signal input
terminal: BNC connector)
PRECAUTIONS
In case of problem
Do not use the camera if smoke or a strange odor comes from the
unit, or if it seems not to function correctly. Disconnect the power
cord immediately, and consult your dealer or a Sanyo Authorized
Service Center.
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage
to the unit. For internal settings and repairs, consult your dealer or a
Sanyo Authorized Service Center.
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside
the camera. If used with a foreign object inside, it could cause a fire,
short-circuits or damages. If water or a liquid gets inside the camera,
disconnect the power cord immediately, and consult your dealer or
a Sanyo Authorized Service Center. Be careful to protect the
camera from rain, sea water, etc.
Be careful when handling the unit
To prevent damages, do not drop the camera or subject it to strong
shock or vibration.
Install away from electric or magnetic fields
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, audio speakers the magnetic field they generate will
distort the image.
Protect from humidity and dust
To prevent damages to the camera, do not install it where there is
greasy smoke or steam, where the dampness may get too high, or
where there is a lot of dust.

TROUBLESHOOTING

Before sending the camera out for repair, check the items below.
If the problem persists after checking these items, contact your
place of purchase or a Sanyo Authorized Service Center.
If no image appears
• Is the power ON?
• Is the coaxial cable attached securely?
• Are the power and voltage normal?
• Is there adequate illumination?
If the image is unclear
• Is the lens in focus? Is the flange back distance adjusted
correctly?
• Is the lens dirty?
Dirt or fingerprints on the lens can adversely affect the image.
Gently wipe any dirt or fingerprints off the lens with a soft cloth or
lens cleaning paper and cleaning fluid (commercially available).
• Is the monitor adjusted correctly?
SERVICE
The camera is a precision instrument. Handle it carefully and always follow
the safety precautions. If the camera requires service, never try to repair it
yourself or open the casing.
For servicing, maintenance, or repairs, contact your place of purchase or a
Sanyo Authorized Service Center.
Protect from high temperatures
Do not install close to stoves, or other heat generating devices, such
as spotlights, etc., or where it could be subject to direct sunlight, as
that could cause deformation, discoloration or other damages.
Be careful when installing close to the ceiling, in a kitchen or boiler
room, as the temperature may raise to high levels. Install where the
temperature range will stay between –10°C (14°F) and 50°C
(122°F). (no condensation)
Cleaning
• Dirt can be removed from the cabinet by wiping it with a soft cloth.
To remove stains, wipe with a soft cloth moistened with a soft
detergent solution and wrung dry, then wipe dry with dry soft cloth.
• Do not use benzine, thinner or other chemical product on the
cabinet, as that may cause deformation and paint peeling. Before
using a chemical cloth, make sure to read all accompanying
instructions. Make sure that no plastic or rubber material comes
in contact with the cabinet for a long period of time, as that may
cause damage or paint peeling.
Printed on recycled paper
1AC6P1P2706--
SANYO Electric Co., Ltd.
L73R4/US (0503TR-KP-TTC)
Printed in Taiwan

SPECIFICATIONS

Scanning system
: EIA standard
(525 scanning lines, 30 frames/second)
Interlace
: PLL 2:1 interlace
Image device
: 1/3-inch solid-state CCD
: 811 (H) × 508 (V)
Number of pixels
: 768 (H) × 494 (V)
Number of pixels in image area
Sync system
: External sync (automatic switched)
Internal sync/Line lock (manually switched)
Resolution
: 570 TV lines
: 1.0 V(p-p)/75 Ω , composite
Video output terminal
Image S/N ratio
: 50 dB min.
Minimum required illumination
: 0.07 lx approx. (with F1.2 lens, 50 IRE)
Backlight compensation ON/OFF
: Set to "ON" or "OFF"
Auto-iris lens output
: DC output (variable DC level), 4-pin terminal
Lens mount
: CS mount
Flange-back
: 12.5 mm (adjustment range: ±0.5 mm)
Auto-iris lens switching
: EI/VIDEO/DC
Attachment screw hole diameter
: 1/4"-20UNC (top or bottom surface)
Operating environment
: Ambient temperature: –10 to +50°C (14 to
122°F)
Humidity: 90% RH max.
Power supply
: 24 V AC/60 Hz, 12 – 15 V DC
Power consumption
: 3.0 W approx.
Weight
: 245 g approx.
Accessories
: Clamping core (1 pc.)
Appearance and specifications are subject to change without prior notice.
121.3
57
109.5
0.5
45
9
1/4"-20 UNC
41.7
14

Advertisement

loading

Summary of Contents for Sanyo VCB-3384

  • Page 1: Information To User

    (2) this device must accept any interference received, including interference that If you need help with installation and/or settings, please consult may cause undesired operation. Changes or modifications not expressly approved by Sanyo may void the user's your dealer. authority to operate this camera.
  • Page 2: Camera Installation

    H (High) CAUTION In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user's expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.