Sony MDR-1RNC Operating Instructions
Noise canceling headphones
Hide thumbs
Also See for MDR-1RNC:
- User manual ,
- Specifications (3 pages) ,
- Operating instructions (2 pages)
Advertisement
Quick Links
Noise Canceling
Operating Instructions
Headphones
MDR-1RNC
© 2012 Sony Corporation Printed in Malaysia
English
Noise Canceling Headphones
Using the Center button
WARNING
(Inline remote and
Do not expose the battery to excessive heat such as direct
microphone cord for
sunlight, fire or the like.
iPod/iPhone/iPad)
Checking the remaining
battery
Operation
Explanation
Single press
Plays/pauses a track of the
connected iPod.
Status
POWER Indicator
Beep sound
Double press
Skips to the next track.
Full
*
No beep
Blinks 3 times
Triple press
Skips to the previous track.
Blinks 2 times
*
No beep
Long press
Starts the "VoiceOver
available).
Low
*
No beep
Blinks 1 time
Press once when call is
Answers the call.
Empty
Blinks quickly
Long beep
incoming
(30 seconds)
(2 seconds)
Press again
Ends the call.
*
When turning off the power of the headphones.
Hold down for about
Rejects an incoming call (two
two seconds and
low beeps confirm the call was
release
rejected).
Checking the charging
*
Availability of the "VoiceOver" feature depends on iPod
status
and its software version.
Note
Status
Charging indicator
Be careful not to unintentionally press any buttons when
Charging
On
you carry your iPod with this headphones connected.
Full
Off
Charging malfunction
Blinks
Automatic AI Noise
Canceling
The Automatic AI Noise Canceling function constantly
analyzes environmental ambient sound components and
automatically selects the most effective noise canceling
mode.
Noise canceling mode types
NC Mode A:
Noise mainly in an airplane is effectively
reduced.
NC Mode B:
Noise mainly in a bus or a train is effectively
reduced.
NC Mode C:
Noise mainly found in an office environment
(PC, copier, air ventilation, etc.) is effectively
reduced.
How to use/使用方式/사용 방법
1
Charging the headphones/對耳機充電/헤드폰 충전하기
L indication
R indication
L 標示
R 標示
L 표시
R 표시
GB
CT
2
Connecting/連接/연결하기
KR
Tactile dot (on the left)
觸感圓點（在左邊）
돌기(왼쪽)
3
Turning on the power/開啟電源/전원 켜기
Tips
Notes on using on the airplane
–
When the headphones are turned on, NC Mode A is set.
Do not use the headphones when use of electronic
–
It may take a few seconds to analyze the environmental
equipment is prohibited or when use of personal
ambient sound.
headphones for in-flight entertainment services is
4-448-091-21(1)
prohibited.
Notes on use
Notes on charging the headphones
–
Charge the headphones using the supplied micro-USB
What is noise canceling?
cable. Otherwise, it may cause a malfunction.
–
Charge in an environmental temperature of between 5°C
The noise canceling circuit actually senses outside noise
and 35°C. Otherwise, the battery may not fully charge.
with built-in microphones and sends an equal-but-opposite
–
Do not store the headphones in hot places for a long time.
canceling signal to the headphones.
When storing it for more than a year, charge the battery
Notes on the noise canceling function
once a year to prevent over discharge.
–
For system requirements for a computer that can charge
–
Adjust the earpads so that they cover your ears, otherwise
the battery using USB, see "System requirements for
noise canceling will not function properly.
battery charge using USB".
–
The noise canceling effect may vary depending on how
–
If the headphones are malfunctioning, charging will not
you wear the headphones.
start and the charging indicator will blink. In this case,
–
Do not cover the microphone of the headphones with
disconnect the unit from the connected device, and
your hands. The noise canceling function may not work
consult your place of purchase, or a Sony dealer.
*
" feature (if
properly.
Notes on handling
–
Because the headphones are designed to fit closely in your
ears, forcing them against your ears may result in eardrum
damage. Avoid using the headphones where they are
liable to be struck by people or other objects, such as a
ball, etc.
–
Pressing the headphones against your ears may produce a
diaphragm click sound. This is not a malfunction.
–
Clean the headphones with a soft dry cloth.
–
Do not leave the plug dirty otherwise the sound may be
distorted.
–
Be sure to consult a Sony dealer when the earpads
Microphone
become dirty or damaged, or when the headphones
–
After you turn on the power of the headphones, you may
require repair work.
–
Do not leave the headphones in a location subject to
hear a slight hiss. This is the operating sound of the noise
canceling function, not a malfunction.
direct sunlight, heat or moisture.
–
The noise canceling function works for noise in the low
–
Do not subject the headphones to excessive shock.
–
frequency band primarily. Although noise is reduced, it is
Handle the driver units carefully.
not canceled completely.
–
If you feel drowsy or sick while using this headphones,
–
The noise canceling effect may not be pronounced in a
stop use immediately.
very quiet environment, or some noise may be heard.
Notes on headphones
–
When you use the headphones in a train or a car, noise
may occur depending on street conditions.
–
Howling may occur if you do not wear the headphones
correctly.
–
Howling may occur if you place an object such as finger
close to inside of the headphones. Keep it away from the
As headphones reduce outside sounds, they may cause a
headphones.
traffic accident. Also, avoid listening with your headphones
–
Mobile phones may cause interference and noise. Should
in situations where hearing must not be impaired, for
this occur, locate the headphones further away from the
example, a railroad crossing, a construction site, etc.
mobile phone.
Micro-USB cable
Micro-USB纜線
Micro-USB 케이블
Charging indicator
充電指示器
충전 표시기
iPod/iPhone/iPad
iPod/iPhone/iPad
iPod/iPhone/iPad
Inline remote and microphone cord for iPod/iPhone/iPad
iPod/iPhone/iPad適用的內嵌遠端和麥克風導線
iPod/iPhone/iPad용 인라인 원격 및 마이크로폰 코드
4
Wearing and controlling/配戴和控制/착용 및 제어하기
Volume+
音量+
볼륨+
Center button
中間按鈕
중앙 버튼
Volume–
音量-
볼륨-
Note on static electricity
In particularly dry air conditions, noise or sound skipping
may occur, or mild tingling may be felt on your ears. This is a
result of static electricity accumulated in the body, and not a
malfunction of the headphones.
The effect can be minimized by wearing clothes made from
natural materials.
If you have any questions or problems concerning the
system that are not covered in this manual, please consult
the nearest Sony dealer.
Troubleshooting
No sound
–
Recharge the headphones.
You can listen to the music using the headphones even
when the POWER switch is set to "OFF". In this case, the
noise canceling function, Digital Equalizer, S-Master and
DSEE are not active, and the headphones operate as
passive headphones.
–
Check that the rechargeable battery is not depleted.
–
Check the connection of the headphones and the
equipment.
–
Check that the connected equipment is turned on.
–
Turn up the volume of the connected equipment.
The noise canceling effect is not sufficient
–
The noise canceling function is effective in low frequency
ranges such as airplanes, trains, or offices (near air-
conditioning, etc.) and is not as effective for higher
frequencies, such as human voices.
–
Turn on the headphones.
Distorted sound
–
Turn down the volume of the connected equipment.
–
Recharge the headphones.
Power does not turn on or the headphones
do not operate properly
–
Recharge the headphones.
If the power does not turn on, even after charging the
High volume may affect your hearing. For traffic
headphones, the rechargeable battery may be damaged.
safety, do not use while driving or cycling.
In this case, consult your place of purchase or a Sony
dealer.
Charging cannot be done
–
Check that the charging indicator is lights up.
Connect the headphones and the micro-USB cable
securely.
–
Check that the micro-USB cable and the computer are
firmly connected.
–
Check that the micro-USB cable and the computer are
directly connected; not via a USB hub.
–
DSEE
Offers natural sound with a spacious feel by restoring
high-frequency range sound and the tail shape of the
waveform likely to be removed through the audio
compression process.
–
Up to 22 hours of listening time
–
Passive operation
Allows audio listening even when the headphones power
is turned off.
–
Detachable cord
Specifications
General
Type
Closed, dynamic
Driver units
50 mm, dome type
Power handling capacity
100 mW
Impedance
51 Ω at 1 kHz (when the power is on)
19 Ω at 1 kHz (when the power is off)
Sensitivity
103 dB/mW (when the power is on)
100 dB/mW (when the power is off)
Frequency response
5 Hz – 24,000 Hz
Total Noise Suppression Ratio
Approx. 25 dB
Power source
DC 3.7 V Built-in lithium-ion rechargeable
battery or DC 5 V USB
Mass
Approx. 330 g (without cord)
Talk microphone Open circuit voltage level (Inline remote
and microphone cord for iPod/iPhone/iPad)
–42 dB (0 dB = 1 V/Pa)
Headphones charging and usage time
Approx. charging hours Approx. usage hours
4 hours
4)
Included items
Headphones (1)
Inline remote and microphone cord for iPod/iPhone/iPad
After use
(1.2 m cord, using PCOCC, four-conductor gold plated L-
Turn off the power of the headphones
shaped stereo mini plug) (1)
使用後
Micro-USB cable (1.5 m) (1)
關閉耳機電源
Carrying case (1)
Operating Instructions (1)
헤드폰을 사용한 후
헤드폰의 전원을 끕니다
1)
Under the Sony measurement standard.
Microphone
2)
Equivalent to approx. 99.7% reduction of energy of sound
麥克風
compared with not wearing headphones.
마이크로폰
3)
At 1 kHz, 0.1 mW + 0.1 mW output
4)
Hours required to fully charge an empty battery
5)
Time stated above may vary, depending on the
temperature or conditions of use.
Design and specifications are subject to change without
notice.
Compatible iPod/
–
Check the system requirements for a computer that can
iPhone/iPad models
charge the battery using USB.
–
Check that the computer is turned on.
–
Check that the computer is not in standby, sleep or
You can use the headphones with only the following models
hibernation mode.
supporting remote control. Update your iPod, iPhone or
–
If the charging indicator blinks, the headphones may be
iPad to the latest software before use. In the Operating
malfunctioning. Disconnect the unit from the connected
Instructions, iPod, iPhone and iPad are collectively described
device, and consult your place of purchase, or a Sony
as "iPod" except in special cases.
dealer.
–
iPod touch (4th generation)
–
iPod touch (3rd generation)
The unit cannot be recognized by a
–
iPod touch (2nd generation)
computer
–
iPod nano (6th generation)
–
iPod nano (5th generation)
–
Check that the micro-USB cable and the computer are
–
iPod nano (4th generation)
firmly connected.
–
iPod classic 120GB 160GB (2009)
–
Disconnect the micro-USB cable from the computer and
–
iPod shuffle (4th generation)
connect again.
–
iPod shuffle (3rd generation)
–
Check that the micro-USB cable and the computer are
–
iPhone 4S
directly connected; not via a USB hub.
–
iPhone 4
–
There may be a problem with the connected USB port
–
iPhone 3GS
of the computer. Connect to another USB port if it is
–
iPad (3rd generation)
available.
–
iPad 2
–
Try the USB connection procedure again in cases other
–
iPad
than those stated above.
On copyright
No operation works
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and
–
Set the POWER switch of the headphones to "OFF",
iPod touch are trademarks of Apple Inc., registered in the
confirm the connections, and then set the POWER switch
U.S. and other countries.
back to "ON".
"Made for iPod", "Made for iPhone", and "Made for iPad" mean
–
Reset the headphones.
that an electronic accessory has been designed to connect
Insert a small pin, etc. into the RESET button on the left
specifically to iPod, iPhone, or iPad, respectively, and has
housing, and press until the button slightly rebounds.
been certified by the developer to meet Apple performance
The connected iPod does not work
standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards.
–
Check if the cord is connected correctly. Connect
the L type plug to the iPod and the other plug to the
headphones.
Features
–
Digital Noise Canceling with Dual Noise Sensor
Technology
Microphones both inside and outside the housings are
combined with digital noise canceling software engine to
deliver significant noise canceling performance.
–
Automatic AI (Artificial Intelligence) Noise Canceling
function.
Automatic selection of the optimal noise canceling mode
based on intelligent analysis of environmental ambient
noise.
–
Digital Equalizer and full digital S-Master amplifier
Delivers ideal frequency response and high-quality music
reproduction with full digital processing.
System requirements
for battery charge using
USB
Personal Computer with pre-installed with any of the
following operating systems and USB port:
Operating Systems
–
When using Windows
®
Windows
®
7
(Home Premium / Professional / Ultimate / Starter)
(including 64 bit version)
Windows Vista
®
(Service Pack 2 or later)
(Home Basic / Home Premium / Business / Ultimate)
(including 64 bit version)
®
Windows
XP (Service Pack 3 or later)
(Home Edition / Professional / Media Center Edition 2004 /
Media Center Edition 2005)
–
When using Macintosh
Mac OS X (version.10.5 or later)
Windows and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United States
1)
2)
and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc.,
registered in the U.S. and other countries.
3)
22 hours
5)
Advertisement
Related Manuals for Sony MDR-1RNC
Summary of Contents for Sony MDR-1RNC
- Page 1 Howling may occur if you do not wear the headphones safety, do not use while driving or cycling. – Automatic AI (Artificial Intelligence) Noise Canceling mode. In this case, consult your place of purchase or a Sony correctly. function. dealer. Noise canceling mode types –...
- Page 2 – DSEE – 請調整耳墊使其貼合您的耳朵，否則防噪功能將無法正 Edition 2004 / Media Center Edition 2005) – 檢查可使用USB對電池充電的電腦方面系統需求。 關於版權 을 수리해야 하는 경우에는 Sony 대리점에 문의하십 길게 누름 "VoiceOver " 기능을 시작합 오디오 압축 처리를 통해 제거될 것 같은 파형의 꼬리 確運作。 – 請檢查電腦是否已開啟。 니다(사용 가능한 경우).