Advertisement
Quick Links
SR20LS Cardioid
Frequency Response
Polar Pattern
Sensitivity
Power Requirements
Peak Acoustic Input
Signal-to-Noise Ratio
Output
Output Impedance
Minimum Output Load
Noise
Dimensions L & D
Weight
Specifications subject to change without notice
+10dB
0dB
-10dB
-20dB
20 30
50
100
Frequency in Hz
Frequency Response of SR20LS (typical)
Impulse Response of SR20LS
Pin 1
XLR Output Connector Assignment of SR20LS
Product Registration
To help you get the most out of your Earthworks
purchase, please take a moment to register your
product online at
earthworksaudio.com/register
Service & Repair
If you have any problems with your Earthworks products,
please contact our Service & Repair Department.
Email: returns@earthworksaudio.com
Telephone: (603) 654-2433, ext. 119
Printed in USA
MADE IN USA
earthworksaudio.com
20Hz to 20kHz
Cardioid
8mV/Pa (-42 dBV/Pa)
24-48V Phantom @ 10mA
150dB SPL
74dB A-weighted
XLR (PIN 2+)
200Ω bal. (between pins 2 & 3 )
1,000Ω, balanced
between pins 2&3
20dB (A-weighted)
Length 7.57 inches (192.2mm)
Diameter .860 inches (21.8mm)
0.36 lb. (164g)
SR20LS
Polar
Response
500
1k
5k
10k
(typical)
Pin 2
+
_
Pin 3
May 14, 2018
20k
SR20LS
High Definition Microphone
for Kickdrum & Other
High SPL Acoustic Sources
User's Guide
™
Advertisement
Related Manuals for Earthworks SR20LS Cardioid
Summary of Contents for Earthworks SR20LS Cardioid
- Page 1 Pin 1 Pin 2 Pin 3 XLR Output Connector Assignment of SR20LS Product Registration To help you get the most out of your Earthworks purchase, please take a moment to register your product online at earthworksaudio.com/register Service & Repair If you have any problems with your Earthworks products, please contact our Service &...
- Page 2 EQ at slightly different frequencies. For a simpler and easier EQ approach, you can use an Earthworks KP1 KickPad™ that will do the ma- jority of this EQ for you. Just plug this XLR type module into Figures 1-A, B &...