SA-VK61DEE · Sound stops during a performance. The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
Page 5
SA-VK61DEE semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equiped assembly, drain off any ESD on your body by touching a known earth ground.
SA-VK61DEE 5 Handling the Lead-free Solder 5.1. About lead free solder (PbF) Distinction of PbF P.C.B.: P.C.B.s (manufactured) using lead free solder will have a PbF stamp on the P.C.B. Caution: · Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please use a high temperature soldering iron.
SA-VK61DEE 7 Precaution of Laser Diode Caution : This product utilizes a laser diode with the unit turned "ON", invisible laser radiation is emitted from the pick up lens. Wavelength : 780 nm(CD)/658 nm(DVD) Maximum output radiation power from pick up : 100 µW/VDE Laser radiation from pick up unit is safety level, but be sure the followings: 1.
SA-VK61DEE 11 About HighMAT 11.1. What is HighMAT? This word combines the abbreviations of Matsushita Electric Industrial Co. Ltd. and High Performance Media Access Technology, and is a trademark of Microsoft Corporation. The products with the HighMAT logo shown below are made according to the HighMAT standard.
SA-VK61DEE · You can also play digital content on the disc, which was created in accordance with the HighMAT format with a conventional CD-ROM player. 11.4. Outline of the HighMAT standard 1. Recording medium · CD-R/CD-RW · Supports ISO 9660 Level Expanded Joliet ·...
Page 16
SA-VK61DEE · WMA, MP3 (MPEG-1 Audio Layer 3) 64 kbps - 160.999 kbps, 44.1 KHz, stereo, fixed bit rate/ variable bit rate. · WMA, V2 and above, excluding Lossless/Voice/Pro · JPEG: Max 6M pixel, Maximum file size: 3 MB 4. Limitations regarding the number of files on the media, etc.
SA-VK61DEE 12.1. Distinguish the trouble cause How to distinguish the trouble 2. Diagnose if Optical Pickup Unit is faulty (refer to diagnosis of Optical Pickup Unit). 1. View mechanical part if visual damage occurred. 3. If mechanism and OPU are OK, it is P.C.B.
Page 19
SA-VK61DEE Cause 3 Possible fault 3. DVD Module (1) Circuit IC2501 (Tracking - pin 11 & 12) IC2501 (Focus - pin 13 & 14) IC2501 (spindle motor - pin 17, 18) IC2501 ( Traverse motor - pin 15, 16) FG unit (pin 1, 2 at FP5102)
SA-VK61DEE 12.2. Diagnosis of Optical Pick-up Unit How to distinguish Laser destruction/damage Confirmation 1 Remove cover of mechanism block so that you will see the lens of optical pickup. Confirm emission of laser at the moment when power switch is turned on.
Page 21
SA-VK61DEE While pressing & hold “STOP” button on main unit, press “Display” button on the remote controller. Unit display laser current on FL. From the reading of display, you can judge if laser diode is damaged or not. Reading on the right side should be less than 70. If reading is more than 70, laser is damaged.
SA-VK61DEE 13 Optical Pickup Self-Diagnosis and Replacement Procedure 13.1. Self-diagnosis This unit is equipped with the optical pickup self-diagnosis function and the tilt adjustment check function. Follow the procedure described below during repair in order to perform self-diagnosis and tilt adjustment effectively. Especially when “NO DISC” is displayed, be sure to apply the self-diagnosis function before replacing with an optical pickup.
SA-VK61DEE 13.2. Cautions to Be Taken During Replacement of Optical Pickup and Spindle Motor Before replacing the optical pickup and spindle motor, check a total usage time respectively. Follow the checking method described below. Item Status and Key Function Display...
SA-VK61DEE 14 Self-Diagnosis Function This unit is equipped with the self-diagnosis function, which displays an error when it occurs, for use during servicing. 14.1. Automatic Displayed Error Codes 14.1.1. Automatic Display Function For a power unit error, the code is automatically displayed.
SA-VK61DEE 14.4. DVD/CD Self-Diagnosis Error Code Description Error Code State, Conditon Cause, Troubleshooting The disc tray cannot be opened: it closes spontaneously. Disc tray open/close detection switch (S1001) failure. (Check and replace) The disc tray cannot be closed: it opens spontaneously.
Page 26
SA-VK61DEE Item Operational Details Display TO Exit Mode Condition and Key Function Jitter display While the player is Jitter display _yyy Press the STOP or stopped and no disc is Measures displays jitter. OPEN button. inserted, press Measurement repeated every...
Page 27
SA-VK61DEE Item Operational Details Display TO Exit Mode Condition and Key Function Measurement of CD While the player is Measurement of CD laser current _032 _032 Automatically exits laser current electricity stopped and no disc is electricity the mode after five...
SA-VK61DEE Item Operational Details Display TO Exit Mode Condition and Key Function Reset spindle While the usage time 2 Usage time 2 reset T2_00000 Automatically exits time is displayed, press and Spindle motor usage time the mode after five hold down the seconds.
SA-VK61DEE 15 Cautions To Be Taken During Servicing 15.1. Recovery after the dvd player is repaired · When Flash ROM or module(2) P.C.B. is replaced, carry out the recovery processing to optimize the drive. Playback the recovery disc to process the recovery automatically.
SA-VK61DEE 2. The version of player is automatically checked and prompts if necessary. 3. Select version upgrade process using the cursor keys on the remote controller unit. (Select YES or NO) 4. a. If YES is selected, the process starts.
SA-VK61DEE 16 Disassembly and Assembly of Main Component 16.1. Disassembly flow chart The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the servicing. To assemble the unit, reverse the steps shown in the chart as below.
SA-VK61DEE 16.2. Disassembly of Top Cabinet Step 1 Remove 3 screws each side and 5 screws at rear panel. Step 2 Lift up both sides of cabinet ass’y, push the cabinet ass’y toward the rear and remove the top cabinet.
Page 33
SA-VK61DEE Step 1 Insert the gear tool into the hole on the underside of changer chasis and then rotate in the direction of arrow. The disc tray will be open. Step 4 Release the 2 claws, and then remove the Top Ornament Unit.
SA-VK61DEE 16.5. Disassembly for DVD changer unit · Follow the (Step 1) - (Step 2) of Item 16.2. 16.5.1. Disassembly of the DVD Module · Follow the Disassembly for the Top Ornament Unit of Item (1) P.C.B. 17.4. · Follow the (Step 1) - (Step 2) of Item 16.2.
SA-VK61DEE Step 3 Detach connectors CN601, CN602 and CN302. Step 1 Remove the 4 screws. Step 4 Lift up the Main P.C.B. to remove it. Caution Note: Avoid using/ exerted strong force when removing the Main P.C.B. Step 2 Detach wire.
SA-VK61DEE Step 4 Unsolder the terminals of Power Amp IC, replace the component. Step 2 Disconnect connector CN950 & CN951. · Replacement of Power Amp IC Step 1 Remove the 2 screws fixed to the Power Amplifier IC. Step 2 Remove 2 screws fixed to the Power Amplifier IC and Transistor Holders.
Page 38
SA-VK61DEE clockwise. (The slide plate R moves for a little amount.) Step 4 Pressing the claw (B) in the direction of arrow (1), the connection lever moves in the direction of arrow (2). Step 5 Lift up the traverse deck ass’y.
Page 39
SA-VK61DEE Step 15 Pull out the drive shaft and guide shaft. Step 10 Remove the tab. Step 11 Disengage the tabs from the traverse gear. Step 16 Remove the FFC board from the connector, and then remove the DVD Module (1) P.C.B.
Page 40
SA-VK61DEE Step 3 Force the claw of timing lever. · Note for installation of the DVD Module (1) P.C.B. Step 4 Force the disc tray fully. · Installation for traverse deck ass’y Step 1 Install the traverse deck ass’y to the timing lever.
Page 41
SA-VK61DEE Step 6 Insert the gear with hexagonal wrench into the hole. 16.8.2. Replacement for the disc tray Step 1 Remove 4 screws. Step 7 Rotate the hexagonal wrench in the direction of arrow, and then open the disc tray fully.
Page 42
SA-VK61DEE Step 4 Holding the disc tray manually, push the disc tray in the direction of the arrow. Step 1 Slide the drive rack fully in the direction of arrow. 16.8.3. Disassembly and reassembly for mechanism base drive unit · Follow the (Step 1) - (Step 9) of Item 16.8.2.
Page 43
SA-VK61DEE Step 5 Release the 2 claws, and then remove the bottom SW P.C.B.. Step 9 Pressing the claw (B) in the direction of arrow (1), force the connection lever in the direction of arrow (2). Step 10 Move the slide plate 1 to the end of stock side.
Page 44
SA-VK61DEE Step 13 Remove the traverse relay gear, traverse cam gear and drive gear. Step 11 Lift up the left end of spindle base unit in the direction of arrow (1), and then remove the unit in the direction of arrow (2).
Page 45
SA-VK61DEE Step 3 Rotate the disc lever in the direction of arrow (1), draw the disc lever. NOTE: Hold the loading stopper ass’y manually bacause it is flipped by spring. NOTE: Take care not to lose the disc lever spring.
Page 46
SA-VK61DEE Step 8 Release the 2 claws, and then remove the relay gear A. Step 9 Release the 2 claws, and then remove the spindle shaft. Step 12 Squeeze the shaft of lower hook, and then draw it. Step 10 Remove the lower spindle spring with tweezers.
Page 47
SA-VK61DEE spread the hold bars of loading stopper and remove the Step 1 Install the traverse cam gear. UP/DOWN base. Step 2 Rotate the traverse cam gear to the direction of arrow. [Installation for loading stopper ass’y] Step 1 Align the claw of loading stoppers ass’y with the slot of spindle base.
Page 48
SA-VK61DEE Step 4 Install the slide plate 2 to the mechanism base, and then match to the connection lever. Step 7 Move the slide plate 1 to forward fully. Step 5 Install the slide plate 1 to the mechanism base, and Step 8 Install the rear lock.
Page 49
SA-VK61DEE Step 14 Install the tray base, traverse ass’y, mechanism cover and upper plate. [Operation check after servicing] Check the proper operation of following items with gear and hexagonal screwdriver. 1. Open/close of tray base. 2. Moving the tray base to the stock side.
SA-VK61DEE Step 6 Release the 2 claws (A), and then remove the Motor P.C.B. Step 7 Release the claw (B), and then remove the motor ass’y. [Notice for motor ass’y installation] 1. Locate the name plate of motor to the traverse ass’y.
Page 51
SA-VK61DEE Step 6 Push the lever upward, and then open the cassette lid ass’y (For DECK1 and DECK2). Step 7 Remove the 5 screw. · Disassembly of pinch roller ass’y & head block Step 12 Release the 2 claws, and then remove the pinch roller (R), (F).
Page 52
SA-VK61DEE Step 5 Remove the flywheel R. Step 6 Release the claw of tape side, and then remove the winding lever and spring. Step 7 Remove the flywheel F. [Installation of the belt] Step 1 The boss and marking should be positioned horizontally.
Page 53
SA-VK61DEE Step 7 Put the capstan belt A temporarily as shown below. Step 2 Put the winding belt on the pulley temporarily. Step 3 Install the flywheel F. Step 4 Put the winding belt on the flywheel F. Step 5 Install the winding lever and spring while pressing the winding arm in the direction of arrow.
SA-VK61DEE 16.10. Replacement for the cassette lid ass’y · Follow the (Step 1) - (Step 2) of Item 16.2. Step 1 Force the lever upward, open the cassette lid ass’y. (For DECK1 and DECK2) Step 10 Remove 3 screws. Step 2 Lift up the cassette lid ass’y in the direction of arrow.
SA-VK61DEE 16.11. Counter-measure for tape trouble · Follow the (Step 1) - (Step 2) of Item 16.2. Step 1 If a cassette tape cannot be removed from the deck since the tape is caught by the capstan or pinch roller during playback or recording, rotate the flywheel F in the direction of the arrow to remove the tape.
SA-VK61DEE 17.1.4. Bias Frequency Adjustment (Deck 1/2) 1. Set the unit to “AUX” position. 2. Insert the Normal blank tape (QZZCRA) into DECK 2 and set the unit to “REC” mode (l use “REC/STOP” key). 3. Adjust L1002 so that the output frequency is within the standard value.
Page 62
SA-VK61DEE TO MAIN BLOCK INVERTER SWITCH JK301 S-VIDEO C OUT Y OUT1 MUTING SWITCH Y OUT2 IC50 C9ZB00000377 CR OUT VIDEO BUFFER 7(8) CB OUT JK302 PY OUT1 PY OUT2 IC4201 MUTING C0FBBK000035 MIX OUT2 VIDEO ZFLAGA SWITCH 2CH D/A...
Page 63
SA-VK61DEE AM ANT FM ANT Z120 CF201 CF202 Q101, Q102 (RF AMP) Z101 FM IF AMP MIXER COIL COIL BUFFER (FM) Q110 SWITCH DECODER RM AMP PHASE PILOT BUFFER CANCEL LEVEL S-CURVE STEREO SWITCH AM/FM BUFFER COMP TUNING DRIVE PILOT...
Page 67
SA-VK61DEE C0DBCFG00004 1.5V C0DBAMH00009 PCONT REGULATOR POWER SWITCH SUPPLY IC FILTER PCONT SWITCH C0DBAMH00009 POWER FILTER SUPPLY IC C0CBADG00005 CURRENT LIMITER REGUALTOR C0DBZHE00017 SWITCH POWER C0CBADG00005 SUPPLY IC REGULATOR Q801 SWITCH C0GAM0000005 MOTOR DRIVE D806 OUT1 OUT2 POWER SUPPLY CONTROL...
Page 68
SA-VK61DEE 3(6) L OUT(R) JK953 FR_L(R) 21(20) L IN(R) D987(D984) Q546~ Q548 Q549,Q550 DCDET SWITCH, DISP HMUT SWITCH POWER SUPPLY IC500 RSN312H24-P Q545 POWER HIC -VCC HI SWITCH Q541,Q542 +VCC HI Q543, REGULATOR Q544 AC IN D501 REGULATOR -VCC LOW...
SA-VK61DEE 19 Schematic Diagram · Cover the parts boxes made of plastics with aluminium foil. (All schematic diagrams may be modified at any time with the development of the new technology) · Put a conductive mat on the work table.
Page 74
SA-VK61DEE SCHEMATIC DIAGRAM - 5 DVD MODULE 2 (DV1) CIRCUIT : +B SIGNAL LINE HIND EXADR (20) HIND EXADR (19) HIND EXADR (18) HIND EXADR (17) HIND EXADR (16) C3003 HIND EXADT (15) HIND EXADT (14) HIND EXADT (13) MDQ(3)
Page 75
SA-VK61DEE SCHEMATIC DIAGRAM - 6 : CD-DA SIGNAL LINE DVD MODULE 2 (DV1) CIRCUIT : +B SIGNAL LINE RA3010 RA3003 RA3004 RA3005 (82 x 4) (82 x 4) (22 x 2) (82 x 4) VDD33 MDQ27 MDQ11 MDQ21 MDQ3 MDQ26...
Page 76
SA-VK61DEE SCHEMATIC DIAGRAM - 7 : CD-DA SIGNAL LINE : DVD (AUDIO) SIGNAL LINE DVD MODULE 2 (DV1) CIRCUIT : +B SIGNAL LINE : DVD (VIDEO) SIGNAL LINE L3101 G1C100K00020 LB3001 J0JHC00000045 D+3.3V FORE/HIND D+1.5V HIND C3001 C3002 LB3002 J0JHC00000045 6.3V330...
SA-VK61DEE 19.3. (C) Main Circuit & (D) Tuner Extent Circuit SCHEMATIC DIAGRAM - 14 : MIC SIGNAL LINE : AM/FM SIGNAL LINE : AUX SIGNAL LINE : MAIN SIGNAL LINE : PLAYBACK SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE...
Page 84
SA-VK61DEE SCHEMATIC DIAGRAM - 15 : AUX SIGNAL LINE : -B SIGNAL LINE : PLAYBACK SIGNAL LINE : MAIN SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE : RECORD SIGNAL LINE : AM/FM SIGNAL LINE Q300 B1GFGCAA0001 MUTING CONTROL C205 R211 50V3.3...
Page 85
SA-VK61DEE SCHEMATIC DIAGRAM - 16 MAIN CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE R273 100K B0ACCK000005 B0ACCK000005 R317 5.6K Q15, Q16 B1GBCFJN0021 MUTING SWITCH 1 2 3 4 16 17 18 19 20 21 1 2 3 4...
Page 86
SA-VK61DEE SCHEMATIC DIAGRAM - 17 : -B SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE C724 C725 R725 16V100 R463 C415 50V1 4.7K LIN4 ELRI/O SYNC R468 C464 LIN3 3.3K 1000P LIN2 GNDR C215 R263 LIN1 VDDR 4.7K...
Page 87
SA-VK61DEE SCHEMATIC DIAGRAM - 18 : -B SIGNAL LINE : DVD (VIDEO) SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE D312, 313, 315 D303 B0ACCK000005 B0BC5R000009 R343 R344 R345 C353 R346 C764 D312 D303 PORT1 DVDD...
Page 88
SA-VK61DEE SCHEMATIC DIAGRAM - 19 MAIN CIRCUIT : +B SIGNAL LINE : DVD (VIDEO) SIGNAL LINE ELJFCR39KF IC50 ELESN220JA C9ZB00000377 VIDEO BUFFER 0.01 2.2K B1GBCFJN0021 INVERTER SWITCH 100K 100K 100K 0.01 100K 100K 100K 470P 0.01 1000P 1000P C302 16V10...
Page 89
SA-VK61DEE SCHEMATIC DIAGRAM - 20 : -B SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE Q801 B1GBCFJA0015 SWITCH Q801 R900 R901 R902 C823 4.7K B1GDCFJJ0023 SWITCH G0A100G00005 6.3V220 6.3V220 16V10 C0CBADG00005 C0CBADG00005 5V REGULATOR 5V REGULATOR 25V220 16V10 G0A101G00022 6.3V100...
Page 90
SA-VK61DEE SCHEMATIC DIAGRAM - 21 : -B SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE C463 R459 16V10 D700,701 B0AACK000005 R462 2.7K C456 50V4.7 R262 2.7K C256 50V4.7 Q321 R727 C263 R259 B1ABCF000131 16V10 R724 C733...
Page 91
SA-VK61DEE SCHEMATIC DIAGRAM - 22 : -B SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE R265 3.3K Q314 R361 R338 MUTE_A Q308 Q308 B1GFGCAA0001 MUTING CONTROL R360 R443 R243 C362 50V22 C242 R245 R248 R465 50V4.7 2.7K...
Page 92
SA-VK61DEE SCHEMATIC DIAGRAM - 23 : -B SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE R100 R101 R103 VREF+ CN309 CHG_CW CHG_CW CHG_HALF CHG_HALF CHG_CCW CHG_CCW R108 CLAMP CHG_AD1 R109 OPEN CHG_AD2 CD LOADING R104 CHG_SW...
Page 93
SA-VK61DEE SCHEMATIC DIAGRAM - 24 : MIC SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE R633 R632 C623 4.7K 1000P C622 IC703 IC703 C1BB00000574 I/O EXPANDER C621 C620 R626 R625 SERD SERA DVD_PCNT KA_ROUT KA_LOUT KA_RIN...
Page 94
SA-VK61DEE SCHEMATIC DIAGRAM - 25 : -B SIGNAL LINE MAIN CIRCUIT : +B SIGNAL LINE L370 G0C221KA0007 DCDET R399 Q375 B1ABCF000011 C375 DCDET SWITCH 6.3V330 CN305 D377 B0ACCK000005 R379 Q374 Q374 100K B1ADCF000001 FAN MOTOR DRIVE R378 D376 D375 C390...
SA-VK61DEE 19.4. (E) Panel Circuit, (F) LED Circuit & (G) Tact Switch Circuit SCHEMATIC DIAGRAM - 26 : MIC SIGNAL LINE : PLAYBACK SIGNAL LINE PANEL CIRCUIT : +B SIGNAL LINE : RECORD SIGNAL LINE R681 SW5V S601 R617 POWER...
Page 97
SA-VK61DEE SCHEMATIC DIAGRAM - 28 : -B SIGNAL LINE PANEL CIRCUIT : +B SIGNAL LINE : MAIN SIGNAL LINE R712 100K R713 100K R714 100K R715 100K R716 100K R717 100K R718 100K R719 100K R720 100K R721 100K R722...
Page 98
SA-VK61DEE SCHEMATIC DIAGRAM - 29 POWER CIRCUIT : MAIN SIGNAL LINE : PLAYBACK SIGNAL LINE (CN954) ON : -B SIGNAL LINE : RECORD SIGNAL LINE SCHEMATIC DIAGRAM - 37 PANEL CIRCUIT : +B SIGNAL LINE : MIC SIGNAL LINE H600/W600...
SA-VK61DEE 19.5. (H) Tuner Circuit SCHEMATIC DIAGRAM - 30 : +B SIGNAL LINE : AM SIGNAL LINE TUNER CIRCUIT : FM OSC SIGNAL LINE : AM OSC SIGNAL LINE : FM SIGNAL LINE Z120 ENV17290G1Y C103 R107 0.01 2SK238 2SC2620...
Page 100
SA-VK61DEE SCHEMATIC DIAGRAM - 31 : AM SIGNAL LINE : AM OSC SIGNAL LINE TUNER CIRCUIT : +B SIGNAL LINE : FM SIGNAL LINE : FM/AM SIGNAL LINE R104 R109 CF202 C105 R108 RLFFETMGD01L 1000P 470K R139 Q110 2SC3311ARA SWITCH...
SA-VK61DEE 19.7. (L) Power Supply Circuit SCHEMATIC DIAGRAM - 34 : +B SIGNAL LINE POWER SUPPLY CIRCUIT : -B SIGNAL LINE : MAIN SIGNAL LINE IC500 RSN312H24-P POWER HIC C503 820P R510 C502 C506 0.01 820P C510 R512 R509 C509...
Page 104
SA-VK61DEE SCHEMATIC DIAGRAM - 35 : +B SIGNAL LINE POWER SUPPLY CIRCUIT : -B SIGNAL LINE : MAIN SIGNAL LINE Q522 Q548 B1AAGC000007 KTC3199GRTA Q548 MUTING SWITCH SWITCH R563 R530 R564 Q522 100K D520 - 523 C543 B0BA01900005 50V2.2 D520...
SA-VK61DEE 19.8. (M) Power Circuit SCHEMATIC DIAGRAM - 36 : +B SIGNAL LINE POWER CIRCUIT : -B SIGNAL LINE : MAIN SIGNAL LINE POWER SUPPLY CIRCUIT POWER SUPPLY CIRCUIT (CP502) ON (H500/W500) ON SCHEMATIC DIAGRAM - 34 SCHEMATIC DIAGRAM - 35...
Page 106
SA-VK61DEE SCHEMATIC DIAGRAM - 37 : +B SIGNAL LINE POWER CIRCUIT : -B SIGNAL LINE D951 - 954 B0HARM000017 D958 D957 B0FBAM000009 B0FBAM000009 250V 6.3A TRANSFORMER C951 C952 CIRCUIT (CN950) ON 250V 6.3A SCHEMATIC DIAGRAM - 38 D969, 971 - 973...
SA-VK61DEE 19.9. (N) Transformer Circuit, (O) AC Inlet Circuit, (Q) CD Loading Circuit, (R) CD Detect Circuit & (S) Spindle Position Circuit SCHEMATIC DIAGRAM - 38 : +B SIGNAL LINE TRANSFORMER CIRCUIT T501 G4C8AGC00001 CN950 P(0) S2’ P(110) POWER S1’...
SA-VK61DEE 20.10. (N) Transformer P.C.B. TRANSFORMER P.C.B (REPX0379D) RL502 D950 CN951 CN950 T501 POWER TRANSFORMER PRIMARY SECONDARY P(0) P(0) P(13) P(123) P(123) P(110) CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B...
SA-VK61DEE 20.11. (O) AC Inlet P.C.B. AC INLET P.C.B (REPX0379D) 250V T1.6AL CN953 T502 SUB-TRANSFORMER JK500 L500 J584 J585 AC IN 230V-240V 50HZ J586 J587 CAUTION RISK OF ELECTRIC SHOCK AC VOLTAGE LINE. PLEASE DO NOT TOUCH THIS P.C.B...
SA-VK61DEE 20.12. (Q) CD Loading P.C.B., (R) CD Detect P.C.B. & (S) Spindle Position P.C.B. CD LOADING P.C.B (REP2578A-N) 2 3 4 5 6 7 8 9 10 OPEN PUSH PUSH CD DETECT P.C.B SPINDLE POSITION P.C.B (REP2578A-N) (REP2578A-N) LOAD...
Page 128
SA-VK61DEE CD LOADING P.C.B. CD DETECT P.C.B. CN953 SOLDER SIDE SOLDER SIDE AC INLET P.C.B. SOLDER SIDE T502 SUB-TRANSFORMER TRANSFORMER AC IN 230V-240V L500 P.C.B. 50HZ SOLDER SIDE 7 ..1 CN951 JK500 RL502 CN950 CAUTION RISK OF ELECTRIC SHOCK AC VOL TAGE LINE.
SA-VK61DEE 23 Terminal Function of IC 23.1. IC600 (C2BBHF000077 ) Pin No. Mark Function PLLDA PLL DATA Output System Microprocessor VDD2 Pin No. Mark Function MUTE_A Audio Mute Output EECS EEPROM Chip Select PLLCE PLL CE SERA EXP_DECK_CK/ DSP_CS DSP CS...
SA-VK61DEE 24 Parts Location and Replacement Parts List Notes: · Important safety notice: Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purposes of fire-retardent (resistors), high-quality sound (capacitors), low noise (resistors), etc are used.
Page 134
SA-VK61DEE 24.1.2. Deck Mechanism Parts List Ref. No. Part No. Part Name & Description Remarks CASSETTE DECK RED0071 R/P HEAD BLOCK UNIT RED0072 P/B HEAD BLOCK UNIT RDG0300 REEL BASE GEAR RDG0301 WINDING RELAY GEAR RDK0026 MAIN GEAR RDR0029-3 RELAY PULLEY...
Page 138
SA-VK61DEE 24.2.2. CD Loading Mechanism Parts List Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks TRAVERSE DECK RHD17044 DRIVE RACK SCREW RMC0415 ADJUST SPRING HOLDER RML0517 TIMING LEVER RME0319 TRV GEAR SPRING...
SA-VK61DEE 24.3.2. Cabinet Parts List Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks CABINET AND CHASSIS RHD30078 SCREW RJFX0003 PCB HOLDER REEX0202 10P FFC RKA0059-K LEG RUBBER REEX0273 30P FFC WIRE RKFX0093-K CASS.
Page 143
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks B1GDCFGA0014 TRANSISTOR Q1021 B1ABEB000001 TRANSISTOR B1GBCFJN0021 TRANSISTOR Q5111 B1BDBF000004 TRANSISTOR B1GBCFJN0021 TRANSISTOR Q5115 B1BDBF000004 TRANSISTOR B1GBCFJN0021 TRANSISTOR Q5211 UNR212100L TRANSISTOR B1GBCFJN0021...
Page 144
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks D615 B0ACCE000003 DIODE LB5106 J0JBC0000015 CHIP INDUCTOR D616 MA2C700A0F DIODE LB5201 J0JBC0000015 CHIP INDUCTOR D617 B0AACK000004 DIODE LB5204 J0JCC0000119 CHIP INDUCTOR...
Page 145
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks J0JBC0000041 CHIP INDUCTOR CONNECTORS L370 G0C221KA0007 COIL L500 RLQZ371 LINE FILTER K1MN14A00049 14P FFC CONNECTOR L600 RLQB3R3KT-1Y COIL CN300 K1KB12B00036 12P CONNECTOR...
Page 146
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks FUSE HOLDERS ERJ3GEY0R00V 0 1/16W ERJ3GEY0R00V 0 1/16W EYF52BC FUSE HOLDER ERJ3GEY0R00V 0 1/16W EYF52BC FUSE HOLDER ERJ3GEY0R00V 0 1/16W EYF52BC...
Page 147
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R109 ERJ3GEYJ123V 12K 1/16W R252 D0GB820JA019 82 1/16W R109 ERJ3GEYJ331V 330 1/16W R253 ERJ3GEYJ472V 4.7K 1/16W R110 ERJ3GEYJ102V 1K 1/16W R254...
Page 148
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R436 D0GB392JA002 3.9K 1/16W R561 ERDS2TJ472T 4.7K 1/4W R437 D0GB333JA002 33K 1/16W R562 ERDS2TJ563T 56K 1/4W R438 ERJ3GEYJ102V 1K 1/16W R563...
Page 149
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R673 ERDS2TJ223T 22K 1/4W R725 ERDS2TJ104T 100K 1/4W R674 ERDS2TJ223T 22K 1/4W R725 ERJ3GEY0R00V 0 1/16W R675 ERDS2TJ222T 2.2K 1/4W R726...
Page 150
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R969 ERDS2TJ681T 680 1/4W R1097 ERJ3GEYJ103V 10K 1/16W R970 ERDS2TJ681T 680 1/4W R1098 ERJ3GEYJ103V 10K 1/16W R972 ERDS2TJ561T 560 1/4W R2011...
Page 151
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks R5227 ERJ3GEYJ331V 330 1/16W ECJ1VB1H103K 0.01 50V R5231 J0JCC0000119 INDUCTOR ECEA1CKA470B 47 16V R5232 J0JCC0000119 INDUCTOR ECJ1VB1H103K 0.01 50V R5233 ERJ3GEYJ222V 2.2K 1/16W...
Page 152
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks C207 ECJ1VB1H332K 3300P 50V C407 ECJ1VB1H332K 3300P 50V C209 ECA1CAD100XI 10 16V C409 ECA1CAD100XI 10 16V C210 ECJ1VC1H101K 100P 50V C410...
Page 153
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks C611 ECBT1H390J5 39P 50V C712 ECJ1VB1A105K 1 10V C612 ECBT1H390J5 39P 50V C713 ECJ1VB1A105K 1 10V C617 ECBT1H220JC5 22P 50V C714...
Page 154
SA-VK61DEE Ref. No. Part No. Part Name & Description Remarks Ref. No. Part No. Part Name & Description Remarks C959 ECA1CM102B 1000 16V C2012 ECUV1C104KBV 0.1 16V C960 ECA1CM102B 1000 16V C2015 ECJ1VC1H102J 1000P 50V C961 ECKR1H102ZF5 1000P 50V C2016...