hit counter script
Sony Handycam DCR-TRV520 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. Handycam DCR-TRV520
  6. Operating instructions manual

Sony Handycam DCR-TRV520 Operating Instructions Manual

Digital camcorders: digital video camera recorder; digital 8
Hide thumbs Also See for Handycam DCR-TRV520:
Table of Contents

Advertisement

Quick Links

Digital
Video Camera
Recorder

Operating Instructions

Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner's Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. DCR-TRV
Serial No.
DCR-TRV520/TRV525
©2000 Sony Corporation
Model No. AC-
Serial No.
DCR-TRV520
3-059-561-11 (2)

Advertisement

Table of Contents
loading

Related Manuals for Sony Handycam DCR-TRV520

Summary of Contents for Sony Handycam DCR-TRV520

  • Page 1: Digital Video Camera

    Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DCR-TRV Serial No.
  • Page 2 Congratulations on your purchase of this Sony Digital Handycam camcorder. With your Digital Handycam, you can capture life’s precious moments with superior picture and sound quality. Your Digital Handycam is loaded with advanced features, but at the same time it is very easy to use.
  • Page 3 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful...

  • Page 4: Table Of Contents

    Table of contents Checking supplied accessories ... 5 Quick Start Guide ... Getting started Using this manual ... 8 Step 1 Preparing the power supply ... 10 Installing the battery pack ... 10 Charging the battery pack ... 11 Connecting to a wall outlet ... 14 Step 2 Inserting a cassette ...

  • Page 5: Checking Supplied Accessories

    Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 Wireless Remote Commander (1) (p. 128) 2 AC-L10A/L10B/L10C AC power adaptor (1), Power cord (1) (p. 11) 3 NP-F330 battery pack (1) (p. 10, 11) 4 CR2025 lithium battery (1) (p.

  • Page 6: Quick Start Guide

    Quick Start Guide Connecting the power cord Use the battery pack when using your camcorder outdoors (p. 10). Inserting a cassette Open the lid of the cassette compartment, and press EJECT. The compartment opens automatically. This chapter introduces you to the basic features of your camcorder.

  • Page 7: Recording A Picture

    Recording a picture Remove the lens cap. Open the LCD panel while pressing OPEN. Viewfinder The picture appears When the LCD panel is closed, use the on the LCD screen. viewfinder placing your eye against its eyecup. The picture in the viewfinder is black and white (DCR-TRV520 only).

  • Page 8: Getting Started

    — Getting started — Using this manual The instructions in this manual are for the two models listed in the table below. Before you start reading this manual and operating your camcorder, check the model number by looking at the bottom of your camcorder. The DCR-TRV520 is the model used for illustration purposes.

  • Page 9: Precautions On Camcorder Care

    Using this manual Precautions on camcorder care •The LCD screen and the viewfinder are manufactured using high-precision technology. However, there may be some tiny black points and/or bright points (red, blue, green or white) that constantly appear on the LCD screen and in the viewfinder.

  • Page 10: Step 1 Preparing The Power Supply

    Step 1 Preparing the power supply Installing the battery pack Install the battery pack to use your camcorder outdoors. Slide the battery pack down until it clicks. To remove the battery pack Slide the battery pack out in the direction of the arrow while pressing RELEASE down.

  • Page 11: Charging The Battery Pack

    Step 1 Preparing the power supply Charging the battery pack Use the battery pack after charging it for your camcorder. Your camcorder operates only with the “InfoLITHIUM” battery pack (L series). (1) Open the DC IN jack cover and connect the AC power adaptor supplied with your camcorder to the DC IN jack with the plug’s v mark facing up.

  • Page 12: Charging Time

    Step 1 Preparing the power supply Until your camcorder calculates the actual remaining battery time “– – – – min” appears in the display window. While charging the battery pack, no indicator appears or the indicator flashes in the display window in the following cases: –...

  • Page 13: Playing Time

    This unit is compatible with the “InfoLITHIUM” battery pack (L series). Your camcorder operates only with the “InfoLITHIUM” battery. “InfoLITHIUM” battery packs have the “InfoLITHIUM” is a trademark of Sony Corporation. Playing time Playing time...

  • Page 14: Connecting To A Wall Outlet

    • The DC IN jack has “source priority”. This means that the battery pack cannot supply any power if the power cord is connected to the DC IN jack, even when the power cord is not plugged into a wall outlet. Using a car battery Use Sony DC Adaptor/Charger (not supplied). 2, 3...

  • Page 15: Step 2 Inserting A Cassette

    Step 2 Inserting a cassette We recommend using Hi8 (1) Prepare the power supply (p. 10). (2) Open the lid of the cassette compartment, and press EJECT. The cassette compartment opens automatically. (3) Insert a cassette with its window facing out and the write-protect tab on the cassette up.

  • Page 16: Recording - Basics

    — Recording – Basics — Recording a picture Your camcorder automatically focuses for you. (1) Remove the lens cap by pressing both knobs on its sides and attach the lens cap to the grip strap. (2) Install the power source and insert a cassette. See “Step 1” and “Step 2” for more information (p.

  • Page 17: Adjusting The Lcd Screen

    Recording a picture Note on LOCK When you slide LOCK to the left, the POWER switch can no longer be set to MEMORY accidentally. The LOCK is released as a default setting. To enable smooth transition You can make the transition between the last scene you recorded and the next scene smooth as long as you do not eject the cassette if you turn off your camcorder.

  • Page 18: Using The Zoom Feature

    Recording a picture After recording (1) Set the POWER switch to OFF (CHARGE). (2) Close the LCD panel. (3) Eject the cassette. Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom function sparingly results in better-looking recordings.
  • Page 19 Recording a picture To record pictures with the viewfinder – adjusting the viewfinder If you record pictures with the LCD panel closed, check the picture with the viewfinder. Adjust the viewfinder lens to your eyesight so that the indicators in the viewfinder come into sharp focus.

  • Page 20: Shooting Backlit Subjects - Back Light

    Recording a picture Shooting backlit subjects – BACK LIGHT When you shoot a subject with the light source behind the subject or a subject with a light background, use the backlight function. Press BACK LIGHT in CAMERA or MEMORY mode. The .

  • Page 21: Using The Nightshot Light

    Recording a picture Using SUPER NIGHTSHOT The Super NightShot mode makes subjects up to 16 times brighter than those recorded in the NightShot mode. (1) Slide NIGHTSHOT to ON in CAMERA mode. indicators flash on the LCD screen or in the viewfinder. (2) Press SUPER NIGHTSHOT.

  • Page 22: Self-Timer Recording

    Recording a picture Self-timer recording Recording with the self-timer starts in 10 seconds automatically. This mode is useful when you want to record yourself. You can also use the Remote Commander for this operation. (1) Press on the LCD screen or in the viewfinder. (2) Press START/STOP.

  • Page 23: Editsearch / Rec Review

    Checking the recording – END SEARCH / EDITSEARCH / Rec Review You can use these buttons to check the recorded picture or shoot so that the transition between the last recorded scene and the next scene you record is smooth. END SEARCH You can go to the end of the recorded section after you record.

  • Page 24: Playback - Basics

    — Playback – Basics — Playing back a tape You can monitor the playback picture on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can control playback using the Remote Commander supplied with your camcorder. (1) Install the power source and insert the recorded tape.

  • Page 25: Using The Data Code Function

    Playing back a tape To display the screen indicators – Display function Press DISPLAY on your camcorder or the Remote Commander supplied with your camcorder. The indicators appear on the LCD screen. To make the indicators disappear, press DISPLAY again. Using the data code function Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code).

  • Page 26: Various Playback Modes

    Playing back a tape Various playback modes To operate video control buttons, set the POWER switch to VTR. To view a still image (playback pause) Press X during playback. To resume playback, press X or N. To advance the tape Press M in the stop mode.

  • Page 27: Viewing The Recording On Tv

    Viewing the recording on TV Connect your camcorder to your TV or VCR with the A/V connecting cable supplied with your camcorder to watch the playback picture on the TV screen. You can operate the playback control buttons in the same way as when you monitor playback pictures on the LCD screen.
  • Page 28 To cancel the super laser link function Press S.LASER LINK. The lamp on the S.LASER LINK button goes out. If you use a Sony TV • You can turn on the TV automatically when you press S.LASER LINK on your camcorder.

  • Page 29: Advanced Recording Operations

    — Advanced Recording Operations — Recording a still image on a tape – Tape Photo recording You can record a still image like a photograph. This mode is useful when you want to record an image such as a photograph or when you print a picture using a video printer (not supplied).

  • Page 30: Self-Timer Tape Photo Recording

    Recording a still image on a tape – Tape Photo recording Self-timer tape photo recording You can record still images on tapes with the self-timer. This mode is useful when you want to record yourself. You can also use the Remote Commander for this operation. (1) In the standby mode, press appears on the LCD screen or in the viewfinder.

  • Page 31: Printing The Still Image

    Recording a still image on a tape – Tape Photo recording Printing the still image You can print a still image by using the video printer (not supplied). Connect the video printer using the A/V connecting cable supplied with your camcorder. Connect the A/V connecting cable to the AUDIO/VIDEO jack and connect the yellow plug of the cable to the video input of the video printer.

  • Page 32: Using The Wide Mode

    Using the wide mode You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9 WIDE). Black bands appear on the LCD screen or in the viewfinder (DCR-TRV525) during recording in 16:9 WIDE mode [a]. The picture during playing back in the viewfinder (DCR-TRV520), on a normal TV [b] or a wide-screen TV [c] are compressed in the widthwise direction.

  • Page 33: Using The Fader Function

    Using the fader function You can fade the picture in or out to give your recording a professional appearance. STBY FADER M.FADER (mosaic) BOUNCE 1) 2) OVERLAP WIPE (ramdom dot) MONOTONE When fading in, the picture gradually changes from black-and-white to color. When fading out the picture gradually changes from color to black-and-white.
  • Page 34 Using the fader function (1) When fading in [a] In the standby mode, press FADER until the desired fader indicator flashes. When fading out [b] In the recording mode, press FADER until the desired fader indicator flashes. The indicator changes as follows: FADER t M.FADER t BOUNCE t MONOTONE t OVERLAP t WIPE t DOT The last selected fader mode is indicated first of all.
  • Page 35 Using the fader function Notes •The overlap, wipe and dot functions work only for tapes recorded in the Digital8 system. •You cannot use the following functions while using the fader function. Also, you cannot use the fader function while using the following functions: –...

  • Page 36: Using Special Effects - Picture Effect

    Using special effects – Picture effect You can digitally process images to obtain special effects like those in films or on the NEG. ART [a] : The color and brightness of the image is reversed. SEPIA : B&W : SOLARIZE [b] : The light intensity is clearer, and the picture looks like an illustration. SLIM [c] : STRETCH [d] : The image expands horizontally.

  • Page 37: Using Special Effects - Digital Effect

    Using special effects – Digital effect You can add special effects to recorded image using the various digital functions. The sound is recorded normally. STILL You can record a still image so that it is superimposed on a moving image. FLASH (FLASH MOTION) You can record still images successively at constant intervals.
  • Page 38 Using special effects – Digital effect (1) Press DIGITAL EFFECT in CAMERA mode. The digital effect indicator appears. (2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode. The indicator changes as follows: STILL y FLASH y LUMI. y TRAIL y SLOW SHTR y OLD MOVIE (3) Press the SEL/PUSH EXEC dial.
  • Page 39 Using special effects – Digital Effect Notes •The following functions do not work during digital effect: – Fader – Low lux mode of PROGRAM AE – Tape photo recording – Super NightShot •The following functions do not work in the slow shutter mode: –...

  • Page 40: Using The Program Ae Function

    Using the PROGRAM AE function You can select PROGRAM AE (Auto Exposure) mode to suit your specific shooting requirements. Spotlight mode This mode prevents people’s faces, for example, from appearing excessively white when shooting subjects lit by strong light in the theater. Soft portrait mode This mode brings out the subject while creating a soft background for subjects such as people or flowers.
  • Page 41 Using the PROGRAM AE function (1) Press PROGRAM AE in CAMERA or MEMORY mode. The PROGRAM AE indicator appears. (2) Turn the SEL/PUSH EXEC dial to select the desired mode. The indicator changes as follows: To turn the PROGRAM AE function off Press PROGRAM AE.

  • Page 42: Adjusting The Exposure Manually

    Adjusting the exposure manually You can manually adjust and set the exposure. Adjust the exposure manually in the following cases: – The subject is backlit – Bright subject and dark background – To record dark pictures (e.g. night scenes) faithfully (1) Press EXPOSURE in CAMERA or MEMORY mode.

  • Page 43: Focusing Manually

    Focusing manually You can gain better results by manually adjusting the focus in the following cases: •The autofocus mode is not effective when shooting: – subjects through glass coated with water droplets. – horizontal stripes. – subjects with little contrast with backgrounds such as walls and sky. •When you want to change the focus from a subject in the foreground to a subject in the background.

  • Page 44: Superimposing A Title

    Superimposing a title You can select one of eight preset titles and two custom titles (p. 46). You can also select the language, color, size and position of titles. (1) Press TITLE to display the title menu in the standby mode. (2) Turn the SEL/PUSH EXEC dial to select (3) Turn the SEL/PUSH EXEC dial to select the desired title, then press the dial.
  • Page 45 Superimposing a title To superimpose the title while you are recording Press TITLE while you are recording, and carry out steps 2 to 5. When you press the SEL/PUSH EXEC dial at step 5, the title is recorded. To select the language of a preset title If you want to change the language, select language and return to step 2.

  • Page 46: Making Your Own Titles

    Making your own titles You can make up to two titles and store them in your camcorder. Each title can have up to 20 characters. (1) Press TITLE in the standby or VTR mode. (2) Turn the SEL/PUSH EXEC dial to select (3) Turn the SEL/PUSH EXEC dial to select the first line (CUSTOM1) or second line (CUSTOM2), then press the dial.

  • Page 47: To Change A Title You Have Stored

    Making your own titles To change a title you have stored In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to change, then press the SEL/PUSH EXEC dial. Turn the SEL/PUSH EXEC dial to select [C], then press the dial to delete the title.

  • Page 48: Inserting A Scene

    Inserting a scene You can insert a scene in the middle of a recorded tape by setting the start and end points. The previously recorded frames between these start and end points will be erased. Use the Remote Commander for this operation. (1) While your camcorder is in the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [b].

  • Page 49: Advanced Playback Operations

    — Advanced Playback Operations — Playing back a tape with picture effects During playback, you can process a scene using the picture effect functions: NEG.ART, SEPIA, B&W and SOLARIZE. During playback, press PICTURE EFFECT and turn the SEL/PUSH EXEC dial until the desired picture effect indicator (NEG.ART, SEPIA, B&W or SOLARIZE) appears.

  • Page 50: Playing Back A Tape With Digital Effects

    Playing back a tape with digital effects During playback, you can process a scene using the digital effect functions: STILL, FLASH, LUMI. and TRAIL. (1) During playback, press DIGITAL EFFECT and turn the SEL/PUSH EXEC dial until the desired digital effect indicator (STILL, FLASH, LUMI. or TRAIL) flashes.

  • Page 51: Enlarging Recorded Images - Pb Zoom

    Enlarging recorded images – PB ZOOM You can enlarge moving and still images recorded on tapes. Besides the operation described here, your camcorder can enlarge still images recorded on “Memory Stick”s. (1) Press PB ZOOM on your camcorder while you are playing back. The image is enlarged, and R r appears on the LCD screen or in the viewfinder.

  • Page 52: Quickly Locating A Scene Using The Zero Set Memory Function

    Quickly locating a scene using the zero set memory function Your camcorder goes forward or backward to automatically stop at a desired scene having a counter value of “0:00:00”. Use the Remote Commander for this operation. Use this function, for example, to view a desired scene later on during playback. (1) In the playback mode, press DISPLAY.

  • Page 53: Searching A Recording By Date - Date Search

    Searching a recording by date – Date search You can automatically search for the point where the recording date changes and start playback from that point (Date search). Use the Remote Commander for this operation. Use this function to check where recording dates change or to edit the tape at each recording date.
  • Page 54 Searching a recording by date – Date search Notes • The date search works only for tapes recorded in the Digital8 system. • If one day’s recording is less than two minutes, your camcorder may not accurately find the point where the recording date changes. If a tape has a blank portion in the recorded portions The date search function may not work correctly.

  • Page 55: Searching For A Photo - Photo Search/Photo Scan

    Searching for a photo – Photo search/Photo scan You can search for the recorded still image recorded on tape (photo search). You can also search for still images one after another and display each image for five seconds automatically (photo scan). Use the Remote Commander for these operations. Searching for a photo (1) Set the POWER switch to VTR.

  • Page 56: Scanning Photo

    Searching for a photo – Photo search/Photo scan Scanning photo (1) Set the POWER switch to VTR. (2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo scan indicator appears. The indicator changes as follows: DATE SEARCH t PHOTO SEARCH t PHOTO SCAN (3) Press .

  • Page 57: Editing

    — Editing — Dubbing a tape Using the A/V connecting cable Connect your camcorder to the VCR using the A/V connecting cable supplied with your camcorder. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder.

  • Page 58: Using The I.link Cable (Dv Connecting Cable)

    Dubbing a tape Using the i.LINK cable (DV connecting cable) Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing.

  • Page 59: Using With Analog Video Unit And Pc - Signal Convert Function

    Using with analog video unit and PC – Signal convert function You can capture images and sound from an analog video unit connected to a PC which has the i. LINK (DV) jack to your camcorder. Analog video signals t Digital video signals (1) Set the POWER switch to VTR.

  • Page 60: Recording Video Or Tv Programs

    Recording video or TV programs Using the A/V connecting cable You can record a tape from another VCR or a TV program from a TV that has video/ audio outputs. Use your camcorder as a recorder. (1) Insert a blank tape (or a tape you want to record over) into your camcorder. If you are recording a tape from the VCR, insert a recorded tape into the VCR.
  • Page 61 Recording video or TV programs Using the i.LINK cable (DV connecting cable) Simply connect the i.LINK cable (DV connecting cable) (not supplied) to DV IN/OUT and to DV IN/OUT of the DV products. With digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing.

  • Page 62: Inserting A Scene From A Vcr - Insert Editing

    Inserting a scene from a VCR – Insert Editing You can insert a new scene from a VCR onto your originally recorded tape by specifying the insert start and end points. Use the Remote Commander for this operation. Connections are the same as in “Recording video or TV programs” on page 60, 61. Insert a cassette containing the desired scene to insert into the VCR.

  • Page 63: Inserting A Scene From A Vcr – Insert Editing

    Inserting a scene from a VCR – Insert Editing (1) Set the POWER switch to VTR. (2) On the VCR, locate just before the insert start point [a], then press X to set the VCR to the playback pause mode. (3) On your camcorder, locate the insert end point [c] by pressing m or M.

  • Page 64: Customizing Your Camcorder

    — Customizing Your Camcorder — Changing the menu settings To change the mode settings in the menu settings, select the menu items with the SEL/ PUSH EXEC dial. The default settings can be partially changed. First, select the icon, then the menu item and then the mode. (1) In CAMERA, VTR or MEMORY mode, press MENU.
  • Page 65 Changing the menu settings Menu items are displayed as the following icons: MANUAL SET CAMERA SET VTR SET LCD/VF SET (DCR-TRV525) LCD SET (DCR-TRV520) MEMORY SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item Menu items differ according to the position of the POWER switch. The LCD screen and the viewfinder shows only the items you can operate at the moment.
  • Page 66 Changing the menu settings Icon/item Mode HiFi SOUND z STEREO TBC* z ON TBC stands for “Time Base Corrector”. DNR* z ON DNR stands for “Digital Noise Reduction”. AUDIO MIX PB MODE z AUTO A/V t DV OUT z OFF When you play back tapes recorded in the Hi8/standard 8 system only.
  • Page 67 Changing the menu settings Icon/item Mode LCD B. L. z BRT NORMAL BRIGHT LCD COLOR — VF B.L* z BRT NORMAL BRIGHT CONTINUOUS z OFF MULTI SCRN QUALITY z FINE STANDARD FLD./FRAME z FIELD FRAME PRINT MARK z OFF PROTECT z OFF SLIDE SHOW DELETE ALL...
  • Page 68 Changing the menu settings Icon/item Mode REC MODE z SP AUDIO MODE z 12BIT q REMAIN z AUTO DATA CODE z DATE/CAM Note on REC MODE When you record on the standard 8 even you select the LP mode in the menu settings. In this case, the indicator “8mm TAPE t SP REC, Hi8 TAPE t LP/SP REC”...
  • Page 69 — To automatically turn on the Sony TV when using the super laser link function To switch the video input on a Sony TV when using the super laser link function (p. 28) — To display selected menu items in normal size...
  • Page 70 Changing the menu settings Icon/item Mode WORLD TIME BEEP z MELODY COMMANDER z ON DISPLAY z LCD REC LAMP z ON INDICATOR z BL OFF Note If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on the TV or VCR.

  • Page 71: Resetting The Date And Time

    Resetting the date and time The default clock setting is set to East Coast Standard Time. The date and time are held in memory by the lithium battery. If you replace the lithium battery with the battery pack or other power source connected, you need not reset the date and time.

  • Page 72: Memory Stick" Operations

    — “Memory Stick” operations — Using “Memory Stick”–introduction You can record and play back still images on the “Memory Stick” supplied with your camcorder. You can easily play back, record or delete still images. You can exchange image data with other equipment such as a personal computer etc., using the serial port adaptor for “Memory Stick”...
  • Page 73 •If you cannot use the “Memory Stick” that has been used on other equipment, format the “Memory Stick” on your camcorder following the steps on page 67. Note that all images on the “Memory Stick” will be deleted if you format it. “Memory Stick” and are trademarks of Sony Corporation.

  • Page 74: Inserting "Memory Stick

    Using “Memory Stick”–introduction Inserting “Memory Stick” (1) Open the lid of the cassette compartment. (2) Insert the “Memory Stick” with the v mark facing toward the “Memory Stick” compartment as illustrated until it clicks. (3) Close the lid of the cassette compartment. To eject the “Memory Stick”...

  • Page 75: Selecting Image Quality Mode

    Using “Memory Stick”–introduction Selecting image quality mode You can select image quality mode in still image recording. Default setting is FINE. (1) Set the POWER switch to VTR or MEMORY. Make sure that the LOCK is set to the right (unlock) position. (2) Press MENU to make the menu display appear.

  • Page 76: Image Quality Settings

    Using “Memory Stick”–introduction Image quality settings Setting FINE (FINE) STANDARD (STD) Differences in image quality mode Recorded images are compressed in JPEG format before being stored into memory. The memory capacity allotted to each image varies depending on the selected image quality mode.

  • Page 77: Recording Still Images On "Memory Stick" - Memory Photo Recording

    Recording still images on “Memory Stick” – Memory Photo recording You can select the FIELD or FRAME mode in still image recording. Your camcorder compensates for camera-shake when recording moving subjects in the FIELD mode. Your camcorder records still images in high quality in the FRAME mode. Select the FIELD or FRAME in the menu settings (p.

  • Page 78: Recording Images Continuously

    Recording still images on “Memory Stick” – Memory Photo recording When the POWER switch is set to MEMORY The following functions do not work: wide mode, digital effect, picture effect, title, low lux mode of PROGRAM AE. When you are recording a still image You can neither turn off the power nor press PHOTO.
  • Page 79 Recording still images on “Memory Stick” – Memory Photo recording (1) Set the POWER switch to MEMORY. Make sure that the LOCK is set to the right (unlock) position. (2) Press MENU to make the menu display appear. (3) Turn the SEL/PUSH EXEC dial to select (4) Turn the SEL/PUSH EXEC dial to select CONTINUOUS, then press the dial.
  • Page 80 Recording still images on “Memory Stick” – Memory Photo recording Continuous shooting settings Setting MULTI SCRN Your camcorder shoots 9 still images at about 0.3 sec intervals and Note on using the video flash light (not supplied) The video flash light does not work in the multi screen mode if you install it to the accessory shoe.

  • Page 81: Self-Timer Memory Photo Recording

    Recording still images on “Memory Stick” – Memory Photo recording Self-timer memory photo recording You can record still images on “Memory Stick”s with the self-timer. This mode is useful when you want to record yourself. You can use the Remote Commander for this operation.

  • Page 82: Superimposing A Still Image In The "Memory Stick" On A Moving Image - Memory Mix

    Superimposing a still image in the “Memory Stick” on a moving image – MEMORY MIX You can superimpose a still image you have recorded on the “Memory Stick” on top of the moving image you are recording. M. CHROM (Memory chroma key) You can swap a blue area of a still image such as an illustration or a frame with a moving image.
  • Page 83 Superimposing a still image in the “Memory Stick” on a moving image – MEMORY MIX Before operation Insert a Hi8 /Digital8 camcorder. (1) Set the POWER switch to CAMERA. (2) Press MEMORY MIX in the standby mode. The last recorded or last composed image appears on the lower part of the screen as a thumbnail image.
  • Page 84 Superimposing a still image in the “Memory Stick” on a moving image – MEMORY MIX To change the still image to superimpose Do either of the following: – Press MEMORY+/– before step 7. – Press the SEL/PUSH EXEC dial before step 7, and repeat the procedure from step 4. To change the mode setting Press the SEL/PUSH EXEC dial before step 7, and repeat the procedure from step 4.

  • Page 85: Recording An Image From A Tape As A Still Image

    Recording an image from a tape as a still image Your camcorder can read moving image data recorded on a tape in the Digital8 system, and record it as a still image on a “Memory Stick.” Your camcorder can also take in moving image data through the input connector and record it as a still image on a “Memory Stick.”...

  • Page 86: Recording A Still Image From Other Equipment

    Recording an image from a tape as a still image Recording a still image from other equipment (1) Set the POWER switch to VTR and set DISPLAY to LCD in the menu settings. (2) Play back the recorded tape, or turn the TV on to see the desired program. The image from TV or VCR appears on the LCD or in the viewfinder.

  • Page 87: Copying Still Images From A Tape - Photo Save

    Copying still images from a tape – Photo save Using the search function, you can automatically take in only still images from tapes recorded in the Digital8 Before operation •Insert a tape recorded in the Digital8 •Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to VTR.
  • Page 88 Copying still images from a tape – Photo save To stop copying Press MENU to stop copying. When the memory of the “Memory Stick” is full MEMORY FULL appears on the LCD screen, and the copying stops. Insert another “Memory Stick” and repeat the procedure from step 2. When the access lamp is lit or flashing Never shake or strike your camcorder.

  • Page 89: Viewing A Still Image - Memory Photo Playback

    Viewing a still image – Memory Photo playback You can play back still images recorded on a “Memory Stick”. You can also play back 6 images at a time by selecting the index screen. Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VTR.
  • Page 90 Viewing a still image – Memory Photo playback Screen indicators during still image playback 1 0 0 - 0 0 2 1 Data file name Playing back 6 recorded images at a time (index screen) You can play back 6 recorded images at a time. This function is especially useful when searching for a particular image.
  • Page 91 Viewing a still image – Memory Photo playback Note When displaying the index screen, the number appears above each image. This indicates the order in which images are recorded on the “Memory Stick”. These numbers are different from the data file names. Files modified with personal computers These files may not be displayed on the index screen.

  • Page 92: Copying The Image Recorded On "Memory Stick" To Tapes

    Copying the image recorded on “Memory Stick” to tapes You can copy still images or titles recorded on “Memory Stick”s and record them to /Digital8 Before operation Insert a Hi8 camcorder. (1) Set the POWER switch to VTR. (2) Using the video control buttons, search a point where you want to record the desired still image.
  • Page 93 Copying the image recorded on “Memory Stick” to tapes During copying You cannot operate the following buttons: MEMORY PLAY, MEMORY INDEX, MEMORY DELETE, MEMORY MIX, MEMORY +, and MEMORY –. Note on the index screen You cannot record the index screen. If you press the EDITSEARCH buttons during pause mode Memory playback stops.

  • Page 94: Enlarging Still Images Recorded On "Memory Stick"S - Memory Pb Zoom

    Enlarging still images recorded on “Memory Stick”s – Memory PB ZOOM You can enlarge still images recorded on a “Memory Stick.” Before operetion Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VTR. Make sure that the Lock is set to the right (unlock) position.

  • Page 95: Playing Back Images In A Continuous Loop - Slide Show

    Playing back images in a continuous loop – SLIDE SHOW You can automatically play back images in sequence. This function is useful especially when checking recorded images or during a presentation. Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY.

  • Page 96: Playing Back Images In A Continuous Loop – Slide Show

    Playing back images in a continuous loop – SLIDE SHOW To view the recorded images on TV Connect your camcorder to a TV with the A/V connecting cable supplied with your camcorder before operation. If you change the “Memory Stick” during operation The slide show does not operate.

  • Page 97: Preventing Accidental Erasure - Image Protection

    Preventing accidental erasure – Image protection To prevent accidental erasure of important images, you can protect selected images. Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to the right (unlock) position.

  • Page 98: Deleting Images

    Deleting images You can delete images stored in a “Memory Stick.” Before operation Insert a “Memory Stick” into your camcorder. Deleting selected images (1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to the right (unlock) position.
  • Page 99 Deleting images Deleting all the images You can delete all the unprotected images in the “Memory Stick”. (1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to the right (unlock) position. (2) Press MENU to make the menu display appear. (3) Turn the SEL/PUSH EXEC dial to select (4) Turn the SEL/PUSH EXEC dial to select DELETE ALL, then press the dial.
  • Page 100 Deleting images While DELETING appears Do not turn the POWER switch or press any buttons. If the write-protect tab on the “Memory Stick” is set to LOCK You cannot delete images.

  • Page 101: Writing A Print Mark - Print Mark

    Writing a print mark – PRINT MARK You can specify the recorded still image to print out. This function is useful for printing out still images later. Your camcorder conforms with the DPOF (Digital Print Order Format) standard for specifying the still images to print out. Before operation Insert a “Memory Stick”...

  • Page 102: Additional Information

    — Additional Information — Digital8 playback What is the “Digital8 This video system has been developed to enable digital recording to Hi8 video cassette . Usable cassette tapes We recommend using Hi8 The recording time when you use your Digital8 standard 8 standard 8 the SP mode.)
  • Page 103 Digital8 system, recording and playback When you playback a dual sound track tape When you use tapes recorded in the Digital8 When you play back a Digital8 tape recorded in the DV system, set HiFi SOUND to the desired mode in the menu settings (p.

  • Page 104: About I.link

    About the Name “i.LINK” i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 is an international standard standardized by the Institute of Electrical and Electronic Engineers.
  • Page 105 DV jacks, see page 86. This unit can also be connected to other i.LINK (DV) compatible equipment made by SONY (e.g. VAIO series personal computer) other than video equipment . Before connecting this unit to a personal computer, make sure that application software supported by this unit is already installed on the personal computer.

  • Page 106: Changing The Lithium Battery In Your Camcorder

    POWER switch to CAMERA or MEMORY. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025 lithium battery. Use of any other battery may present a risk of fire or explosion. Discard used batteries according to the manufacturer’s instructions.
  • Page 107 (1) Open the LCD panel and open the lid of the lithium battery compartment. (2) Push the lithium battery in the direction of the arrow and pull it out from the holder. (3) Install a Sony CR2025 or Duracell DL-2025 lithium battery with the positive (+) side facing out. (4) Close the lid.

  • Page 108: Troubleshooting

    If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. If “C:ss:ss” appears on the LCD screen, in the viewfinder or the display window, the self-diagnosis display function has worked.
  • Page 109 Rewind the tape. (p. 24) • The video head may be dirty. c Clean the heads using the Sony V8-25CLD cleaning cassette (not supplied). (p. 118) • The stereo tape is played back with HiFi SOUND set to 2 in the menu settings.
  • Page 110 Troubleshooting In the recording and playback modes Symptom The power does not turn on. The end search function does not work. The end search function does not work correctly. The battery pack is quickly discharged. The battery remaining indicator does not indicate the correct time.
  • Page 111 Troubleshooting When operating using the “Memory Stick” Symptom The “Memory Stick” does not function. Recording does not function. The image cannot be deleted. You cannot format the “Memory Stick”. Deleting all the images cannot be carried out. You cannot protect the image. You cannot write a print mark on the still image.
  • Page 112 Remove the cassette and insert it again, then operate your camcorder. • The AC power adaptor is disconnected. c Connect it firmly. (p. 14) • Something is wrong with the battery pack. c Contact your Sony dealer or local authorized Sony service facility.

  • Page 113: Self-Diagnosis Display

    C:31:ss C:32:ss E:61:ss E:62:ss If you are unable to rectify the problem even if you try corrective actions a few times, contact your Sony dealer or local authorized Sony service facility. LCD screen, viewfinder or display window Self-diagnosis display •C:ss:ss You can service your camcorder yourself.

  • Page 114: Warning Indicators And Messages

    Warning indicators and messages If indicators and messages appear on the LCD screen, in the viewfinder, or in the display window, check the following: See the page in parentheses “( )” for more information. Warning indicators Warning indicator as to “Memory Stick”* Slow flashing: •No “Memory Stick”...
  • Page 115 Warning indicators and messages Warning messages •CLOCK SET •FOR “InfoLITHIUM” BATTERY ONLY •8mm TAPE t SP REC Hi8 TAPE t LP/SP REC •Q Z TAPE END •Q NO TAPE • CLEANING CASSETTE** •COPY INHIBIT • FULL • • NO FILE •...

  • Page 116: Using Your Camcorder Abroad

    Using your camcorder abroad Using your camcorder abroad You can use your camcorder in any country or area with the AC power adaptor supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz. When charging the battery pack, use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b].

  • Page 117: Maintenance Information And Precautions

    Maintenance information and precautions Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly.
  • Page 118 – playback pictures are hardly visible. – playback pictures do not appear. If the above problem occurs, clean the video heads with the Sony V8-25CLD cleaning cassette (not supplied). Check the picture and if the above problem persists, repeat cleaning.
  • Page 119 Maintenance information and precautions Removing dust from inside the viewfinder (DCR-TRV520 only) (1) 1Remove the screw with a screwdriver (not supplied). 2Then, while holding the RELEASE knob up, 3turn the eyecup in a counterclockwise direction and pull it out. (2) Clean the surface with a commercially available blower for a still camera. (3) Turn the eyecup in a clockwise direction, then replace the screw.
  • Page 120 • When inputting the image recorded by Hi8/standard 8 (analog) system into your PC, dub the image into a Digital8 When inputting the image recorded by Hi8/standard 8 system into Sony VAIO The Program Capture function of DVgate motion doesn’t work. To use this function,...

  • Page 121: Battery Pack

    •If you touch the liquid, wash it off with water. •If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer.

  • Page 122: Specifications

    Specifications Video camera recorder System Video recording system 2 rotary heads Helical scaning system Audio recording system Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo) Video signal NTSC color, EIA standards Recommended cassette Hi8/Digital8 video cassette Recording/playback time (using...

  • Page 123: Quick Reference

    2 OPEN button (p. 16) 3 VOLUME buttons (p. 24) 4 BATT RELEASE lever (p. 10) This mark indicates that this product is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase accessories with this “GENUINE VIDEO ACCESSORIES”...
  • Page 124 Identifying the parts and controls 9 Video control buttons (p. 24, 26) x STOP (stop) m REW (rewind) N PLAY (playback) M FF (fastforward) X PAUSE (pause) z REC (recording) The control buttons light up when you set the POWER switch to VTR. 0 EDITSEARCH buttons (p.
  • Page 125 Identifying the parts and controls ws Eyecup wd Viewfinder wf MEMORY PLAY button (p. 89) wg MEMORY – button (p. 83, 89) wh LCD screen (p. 17) wj Speaker (self-timer) button (p. 22) wl Viewfinder lens adjustment lever (p. 19) e;...
  • Page 126 Identifying the parts and controls el Intelligent accessory shoe r; DATA CODE button (p. 25) ra DISPLAY button (p. 25) rs Lithium battery compartment (p. 107) rd PB ZOOM button (p. 51, 94) rf TITLE button (p. 44) rg Power Zoom lever (p. 18) Notes on the intelligent accessory shoe •The intelligent accessory shoe supplies power to optional accessories such as a video light or microphone.
  • Page 127 Identifying the parts and controls td EJECT button (p. 15) tf Access lamp (p. 74) tg “Memory Stick” compartment (p. 74) th Cassette compartment (p. 15) tj Grip strap tk LANC /DIGITAL I/O jack (p. 91) LANC stands for Local Application Control Bus System.

  • Page 128: Remote Commander

    •Your camcorder works in the Commander mode VTR 2. Commander modes 1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR in the Commander mode VTR 2, we recommend changing the Commander mode or covering the sensor of the VCR with black paper.
  • Page 129 Identifying the parts and controls Operation indicators LCD screen and Viewfinder REC 0:00:00 M.FADER 16:9WIDE SEPIA 1 Recording mode indicator (p. 16) /Mirror mode indicator (p. 17) 2 Format indicator (p. 102) indicator appears. 3 Remaining battery time indicator (p. 11, 19) 4 Zoom indicator (p.

  • Page 130: Quick Function Guide

    Quick Function Guide Functions to adjust exposure (in the recording mode) •In a dark place •In insufficient light •In dark environments such as sunset, fireworks, or general night views •Shooting backlit subjects •In spotlight, such as at the theater •In strong light or reflected light, such as at a beach in midsummer or on a ski slope Functions to give images more impact (in the recording mode)

  • Page 131: Index

    Index A, B AC power adaptor ... 11 Adjusting viewfinder ... 19 AFM HiFi Sound ... 103 AUDIO MIX ... 66 AUDIO MODE ... 68 A/V connecting cable ... 27, 31, 57, 86 BACK LIGHT ... 20 Battery pack ... 10 BEEP ...
  • Page 132 Sony Corporation Printed in Japan...

This manual is also suitable for:

Handycam dcr-trv525

Table of Contents