Table of Contents
Advertisement
Step 2: Charging the battery pack
You can charge the battery after attaching the
"InfoLITHIUM" battery pack (P series)
(p.120) to your camcorder.
• You cannot use an NP-FP30 battery pack with
your camcorder. (See the reverse side of the
battery pack for the model number.) Installing the
battery pack with excess force may lead to
camcorder malfunction such as deterioration in
battery pack performance or difficulty in
removing the battery pack.
POWER switch
CHG lamp
Battery
DC IN
pack
jack
Power cord
To the wall outlet
1
Slide the battery pack in the
direction of the arrow until it clicks.
DC plug
AC Adaptor
2
Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
3
Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the v mark on the DC
plug is facing up.
DC IN jack
4
Connect the power cord to the AC
Adaptor and the wall outlet.
17
Hide quick links:
Advertisement
Table of Contents
