C:(or E:) : (Self-diagnosis display)
C:04:
The battery pack is not an "InfoLITHIUM"
battery pack (V series). Use an
"InfoLITHIUM" battery pack (V series)
(p. 112).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 12).
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E: :
Follow the steps from to on page 91.
(Warning on the internal hard disk of
the camcorder)
Fast flashing
The internal hard disk of the camcorder is full.
An error may have occurred with the internal
hard disk of the camcorder.
(Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions, may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
for a while in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
(Low temperature warning)
Fast flashing
The temperature of your camcorder is
extremely low. Make the camcorder warm.
(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 19.
No memory card is inserted (p. 19).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 57), delete unnecessary images, or
format the memory card (p. 85).
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Show others] [REPAIR
IMG.DB F.] (under
category) the recording medium.
The memory card is damaged.
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 85).
[MANAGE MEDIA]
US
99