Siemens Flowrite 599 Series Technical Instructions
Three-way valves 1/2 to 2-inch bronze body
Hide thumbs
Also See for Flowrite 599 Series:
- Technical instructions (18 pages) ,
- Installation instructions (4 pages) ,
- Technical instructions (6 pages)
Table of Contents
Advertisement
Quick Links
Flowrite™ 599 Series
Three-Way Valves
1/2 to 2-inch Bronze Body
Description
Features
Application
Product Numbers
Ordering a Valve
Plus Actuator
Assembly
The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to work with
either a pneumatic or electronic actuator with a 3/4-inch (20 mm) stroke.
•
ANSI Leakage Class IV (0.01% of Cv)
•
Cartridge type packing
•
Choice of brass or stainless steel trim
•
Direct-coupled universal bonnet
A typical application for the Flowrite three-way valve is the mixing of two different
temperatures of water supplies.
The valve can also be used for throttling or bypass coil control applications. A pump is
recommended on the coil circuit to improve the heat transfer characteristics of the coil
and for freeze protection.
See Table 1.
To order a complete valve plus actuator assembly from the factory, combine the
actuator prefix code with the suffix of the valve assembly product number. See Flowrite
Technical Bulletins 155-772 and 155-776 for complete selection procedure and ordering
codes.
Valve assemblies can be ordered using the valve part numbers in Table 1 and the
actuator prefix codes in Table 7.
Technical Instructions
Document No. 155-185P25
June 10, 2014
VF 599-4
Siemens Industry, Inc.
Advertisement
Table of Contents
Related Manuals for Siemens Flowrite 599 Series
Summary of Contents for Siemens Flowrite 599 Series
- Page 1 See Flowrite Plus Actuator Technical Bulletins 155-772 and 155-776 for complete selection procedure and ordering Assembly codes. Valve assemblies can be ordered using the valve part numbers in Table 1 and the actuator prefix codes in Table 7. Siemens Industry, Inc.
-
Page 2: Specifications
Technical Instructions Flowrite 599 Series Three-Way Valves Document Number 155-185P25 June 10, 2014 Specifications Line size 1/2 to 2 inches (15 to 50 mm) Capacity See Table 2, Table 3 and Figure 3. Material Body style Globe style Seat style... -
Page 3: Service Kits
Flowrite 599 Series Three-Way Valves Technical Instructions Document Number 155-185P25 June 10, 2014 Accessories, 599-00418: The packing heating element. Continued The heater allows the stem to move freely in valves that control fluids at temperatures below 32°F (0°C). It prevents ice crystal formation on the stem that can damage the packing. - Page 4 Technical Instructions Flowrite 599 Series Three-Way Valves Document Number 155-185P25 June 10, 2014 Table 2. Maximum Water Capacity - U.S. Gallons per Minute. Valve Pressure Differential - psi Size Cv\1 Inches 10.1 11.3 12.4 13.9 11.2 12.5 13.7 15.8 17.7 19.4...
- Page 5 Flowrite 599 Series Three-Way Valves Technical Instructions Document Number 155-185P25 June 10, 2014 Figure 3. Water Capacity Graph. Selection Select a valve given: Example 1. Required flow = 20 gpm. 2. Desired pressure drop = 5 psi. 3. Select a 1 inch (25 mm) valve, Cv 10.
- Page 6 Technical Instructions Flowrite 599 Series Three-Way Valves Document Number 155-185P25 June 10, 2014 Table 5. Maximum Available Close-Off Pressures for Pneumatic Actuators Spring Range 3 to 8 psi ( 21 to 55 kPa) 10 to 15 psi (69 to 103 kPa)
-
Page 7: Operation
Flowrite 599 Series Three-Way Valves Technical Instructions Document Number 155-185P25 June 10, 2014 ELECTRICAL PNEUMATIC Figure 4. Close-off Pressures. Operation As the valve stem moves downward, the flow through the NO port decreases and the flow through the NC port increases. As the valve stem... -
Page 8: Installation
For best performance, install the valve assembly with the actuator above the valve body. The valve and actuator can be installed in any position between vertical and horizontal. Siemens Building Technologies does not recommend installing the valve assembly so that the actuator is below horizontal or upside down. - Page 9 Flowrite 599 Series Three-Way Valves Technical Instructions Document Number 155-185P25 June 10, 2014 Dimensions The letters in Figure 6 refer to actuator and service envelope dimensions in Table 7. See Table 8 for valve body dimensions. Table 7. Dimensions of the Actuator and Recommended Service Envelope.
- Page 10 Technical Instructions Flowrite 599 Series Three-Way Valves Document Number 155-185P25 June 10, 2014 Table 8. Female NPT by Female NPT (F×F) 3-Way Valve Dimensions. Valve Dimensions in Inches (mm) Size Weight Valve Inches lbs (kg) (mm) 2-7/8 4-5/16 2-11/16 (15)
-
Page 11: Parts List
Flowrite 599 Series Three-Way Valves Technical Instructions Document Number 155-185P25 June 10, 2014 Parts List Table 9. Parts List for 3-Way Bronze Valves. Item Part Name Part No. Material Packing Cartridge Assembly — — Gasket — Copper Stem and Plug Assembly —... - Page 12 Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. Flowrite is a registered trademark of Siemens Industry, Inc. Teflon is a registered trademark of DuPont. Other product or company names mentioned herein may be the trademarks of their respective owners.