hit counter script

Advertisement

Tools Needed .............................................................. 2
Removing the CD/DVD drive ......................................... 2
Installing a new CD/DVD drive ...................................... 5
Tools needed ............................................................. 10
Removing the hard disk drive ....................................... 10
Replacing the hard disk drive ....................................... 14
Upgrading or replacing memory ......................... 20
Tools Needed ............................................................ 20
Memory Compatibility................................................. 20
Removing the memory ................................................ 21
Installing a new memory card .................................... 24
Troubleshooting.......................................................... 27
Upgrading and Servicing Guide
Manuel de mise à niveau et d'entretien
HP G1 All-in-One PC
Compaq Presario CQ1All-in-One PC
Computer features may vary by model
Les fonctions de l'ordinateur peuvent varier selon le modèle.
Outils nécessaires ......................................................... 2
Retrait du lecteur de CD/DVD ........................................ 2
Outils nécessaires ....................................................... 10
Retrait du disque dur................................................... 10
Installation d'un nouveau disque dur ............................. 14
Outils nécessaires ....................................................... 20
Compatibilité de la mémoire ........................................ 20
Retrait de la mémoire .................................................. 21
Dépannage................................................................ 27

Advertisement

Table of Contents
loading

Summary of Contents for HP G1

  • Page 1: Table Of Contents

    Upgrading and Servicing Guide Manuel de mise à niveau et d'entretien HP G1 All-in-One PC Compaq Presario CQ1All-in-One PC Computer features may vary by model Les fonctions de l’ordinateur peuvent varier selon le modèle. Removing and replacing a CD/DVD drive ....2 Retrait et remplacement d’un lecteur de CD/DVD ..
  • Page 2 633010-121...
  • Page 3: Removing And Replacing A Cd/Dvd Drive

    Removing and Replacing a CD/DVD Drive Retrait et remplacement d’un lecteur de CD/DVD Computer features may vary by model. HP G1 All-in-One PC Compaq Presario CQ1All-in-One PC Les fonctions de l’ordinateur peuvent varier selon le modèle. Before you begin Avant de commencer...
  • Page 4: Tools Needed

    Removing and replacing a CD/DVD drive Retrait et remplacement d’un lecteur de CD/DVD 5 - 10 minutes 5 à 10 minutes Tools Needed Unplug the computer by disconnecting the power cord from the back of the computer. Flathead/Torx screwdriver  Small Phillips screwdriver ...
  • Page 5 Lay the computer down on a flat surface, covered with Insert the screwdriver into each of the six slots at the a soft cloth to protect the screen from scratches or bottom of the computer, and then twist the screwdriver other damage.
  • Page 6 Press down on one of the computer’s feet with the Using a small Phillips screwdriver, loosen the captive thumb of one hand, and then lift the cover with the screw that secures the CD/DVD-drive cover. other hand in a single motion (from left to right or from right to left).
  • Page 7: Installing A New Cd/Dvd Drive

    Installing a new CD/DVD drive Holding the CD/DVD drive by the side edges, slide the drive all the way out of the compartment. Installation d’un nouveau lecteur de CD/DVD Do not pull the bezel on the CAUTION: outer edge of the CD/DVD drive faceplate. It might become damaged or break off.
  • Page 8 Tighten the captive CD/DVD drive cover screw. Position the back cover over the back of the computer, aligning it first at the top and then at the bottom. Serrez la vis imperdable du capot du lecteur de Placez le capot arrière sur le flanc arrière de CD/DVD.
  • Page 9 Lift the stand so that the bottom screw hole is visible. Place the computer in an upright position. Soulevez le socle pour que le trou de la vis du bas soit Mettez l’ordinateur en position verticale. visible. Reconnect all the cables. Replace the five screws on the back cover.
  • Page 10 Plug in the power cord. Branchez le cordon d’alimentation. Press the power button to turn on the computer. Appuyez sur le bouton Marche/Arrêt pour allumer l’ordinateur. TASK COMPLETED TÂCHE COMPLÉTÉE 633009-DN1...
  • Page 11: Removing And Replacing A Hard Disk Drive

    Removing and Replacing a Hard Disk Drive Retrait et remplacement d’un disque dur Computer features may vary by model. HP G1 All-in-One PC Les fonctions de l’ordinateur peuvent varier selon le modèle. Compaq Presario CQ1All-in-One PC Before you begin Avant de commencer...
  • Page 12: Tools Needed

    Removing and replacing a hard disk drive Retrait et remplacement d’un disque dur 5-10 minutes 5 à 10 minutes Tools needed Removing the hard disk drive Retrait du disque dur Flathead/Torx screwdriver  1 Remove items such as CDs, DVDs, and USB storage Small Phillips screwdriver ...
  • Page 13 4 Unplug all attached cables from the back and side of 6 Lift the stand so that the bottom screw is accessible. the computer. Soulevez le socle pour que la vis du bas soit accessible. Débranchez tous les câbles branchés à l’arrière et sur le côté...
  • Page 14 8 Insert the screwdriver into each of the six slots at the 9 Press down on one of the computer’s feet with the bottom of the computer, and then twist the screwdriver thumb of one hand, and then lift the cover with the to release the cover.
  • Page 15 10 Locate the hard-disk drive compartment on the back of 13 Holding the hard-disk drive cage handle, lift the cage the computer. out of the computer. Repérez le compartiment du disque dur à l’arrière de l’ordinateur. 1 1 Using a small Phillips screwdriver, loosen the captive screw that secures the hard-disk drive cage.
  • Page 16: Replacing The Hard Disk Drive

    Replacing the hard disk drive 1 Insert the new hard-disk drive into the cage. Make sure that the hard-disk drive is inserted with the label Installation d’un nouveau disque facing up. CAUTION: A hard disk drive is extremely sensitive to shock impact.
  • Page 17 Ces œillets peuvent tomber Poussez le disque dur dans la connexion de câble. ou se déchirer lorsque vous enlevez le disque dur du boîtier de disque dur. Vous pouvez commander des œillets de rechange sur le site Web HP suivant : http://www.hp.com/support. 633009-DN1...
  • Page 18 6 Tighten the captive screw that secures the hard-disk 8 Position the back cover over the back of the computer, drive cage to the computer. aligning it first at the top and then at the bottom. Serrez la vis imperdable pour fixer le boîtier de disque Placez le capot arrière sur le flanc arrière de dur à...
  • Page 19 10 Lift the stand so that the bottom screw hole is visible. 12 Place the computer in an upright position. Soulevez le socle pour que le trou de la vis du bas soit Mettez l’ordinateur en position verticale. visible. 13 Reconnect all the cables. 1 1 Replace the five screws on the back cover.
  • Page 20 Pour installer le système d’exploitation, suivez les instructions jointes à vos disques de restauration de système. Vous pouvez également commander des disques de restauration sur le site Web HP suivant : http://www.hp.com/support Après avoir installé le système d’exploitation, il vous faudra réinstaller toutes les applications et restaurer toutes les...
  • Page 21: Upgrading Or Replacing Memory

    Upgrading or Replacing Memory Augmentation ou remplacement de la mémoire HP G1 All-in-One PC Computer features may vary by model. Compaq Presario CQ1All-in-One PC Les fonctions de l’ordinateur peuvent varier selon le modèle. Before you begin Avant de commencer Observe the following requirements before removing and Respectez les conditions requises suivantes avant de retirer et de replacing memory.
  • Page 22: Tools Needed

    Upgrading or replacing memory Augmentation ou remplacement de la mémoire 5 - 10 minutes 5 à 10 minutes Tools Needed Outils nécessaires Flathead/Torx screwdriver Tournevis plat/Torx   Small Phillips screwdriver Tournevis cruciforme de précision (petit)   Small screws are easily lost. Remove screws over a surface Les petites vis peuvent facilement être perdues.
  • Page 23: Removing The Memory

    Removing the memory 5 Lay the computer down on a flat surface, covered with a soft cloth to protect the screen from scratches or Retrait de la mémoire other damage. 1 Remove items such as CDs, DVDs, and USB storage devices from the computer.
  • Page 24 7 Using a flathead/Torx screwdriver, remove the five 9 Press down on one of the computer’s feet with the screws attaching the back cover to the computer. thumb of one hand, and then lift the cover with the other hand in a single motion (from left to right or from right to left).
  • Page 25 10 Locate the memory compartment on the back of the 12 Slide the memory cover off the memory compartment. computer. IMPORTANT: If you are removing both cards, you must remove the upper one before removing the lower one. Repérez le module mémoire à l’arrière de l’ordinateur. 1 1 Using a small Phillips screwdriver, loosen the captive screw that secures the memory cover.
  • Page 26: Installing A New Memory Card

    Installing a new memory card 14 Holding the memory card by its edges, remove it from the compartment. Installation d’un nouveau module mémoire NOTE: The replacement memory card may not look exactly the same as the original card due to different manufacturers or models.
  • Page 27 3 Make sure the card is pressed all the way into the slot, 6 Make sure that the wire at the bottom of the computer and then gently push down on the card to snap it into is held by the retaining clasps. place.
  • Page 28 8 Press the cover along all four sides, then pinch the 10 Replace the five screws on the back cover. cover and computer along all four sides to snap the cover latches into place. Remettez les cinq vis du capot arrière en place. 1 1 Place the computer in an upright position.
  • Page 29: Troubleshooting

    12 Reconnect all the cables. 14 Press the power button to turn on the computer. Appuyez sur le bouton Marche/Arrêt pour allumer l’ordinateur. Rebranchez tous les câbles. 13 Plug in the power cord. TASK COMPLETED TÂCHE COMPLÉTÉE Troubleshooting If the computer displays a memory error after you have turned it back on, turn the computer off and unplug the power cord, then open up the memory compartment and make sure the memory card is firmly seated.

This manual is also suitable for:

Compaq presario cq1

Table of Contents