Table of Contents
Advertisement
Help Guide
IC Recorder
ICD-TX800
Operating the remote control
The following describes the basic operations of the remote control.
You can operate your IC recorder only for starting or stopping recording. For the other operations, operate the remote
control.
Releasing the remote control from the HOLD state
The remote control is placed in the HOLD state at your purchase.
Before you use the remote control, release it from the HOLD state.
To release the remote control from the HOLD state, slide the HOLD switch away from "HOLD."
To place the remote control into the HOLD state
You can disable all the buttons on the remote control in order to prevent unintentional operations while you carry around
the remote control.
To place the remote control into the HOLD state, slide the HOLD switch to "HOLD."
Turing on the remote control
The remote control is not equipped with the power button. Press any one of the buttons on the remote control.
This turns on the remote control and starts the process to establish a wireless connection with the IC recorder.
While this wireless connection process is in progress, the operation indicator (
Note
While the operation indicator on the remote control is flashing, the wireless connection process is in progress and button
operations on the remote control are unavailable. Wait until the operation indicator stops flashing, and then operate the remote
control.
) on the remote control keeps flashing.
35
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
