Related Manuals for Sony DVP-S705D
Summary of Contents for Sony DVP-S705D
- Page 1 CD/DVD Player Operating Instructions DVP-S705D 1999 by Sony Corporation 3-867-138-12(1)
- Page 2 Welcome! Thank you for purchasing the Sony CD/ DVD Player. Before operating the unit, please read this manual thoroughly and retain it for future reference.
-
Page 3: Table Of Contents
ABLE OF CONTENTS About This Manual 4 This Player Can Play the Following Discs 4 Precautions 6 Notes on Discs 6 Getting Started 7 Unpacking 7 TV Hookups 8 Receiver (Amplifier) Hookups 10 5.1 Channel Surround Hookups 12 Selecting the Language for On-Screen Display 14 Playing Discs 15 Playing Discs 15 Playing at Various Speeds/Frame by Frame... -
Page 4: About This Manual
This player switches the color system, NTSC or PAL, according to the connected TV. (For details, see page 9) Region code of DVDs you can play on this unit Your DVD player has a region code printed on the back of the unit and will only play DVDs that are labeled with identical region codes. - Page 5 To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel DTS Digital Surround™...
-
Page 6: Precautions
If you have any questions or problems concerning your player, please consult your nearest Sony dealer. IMPORTANT NOTICE Caution: The enclosed DVD player is capable of holding a still video image or On screen display image on your television screen indefinitely. -
Page 7: Getting Started
Getting Started This section describes how to hook up the CD/DVD player to a TV (with audio/video input jacks) and/or an AV receiver (amplifier). You cannot connect this player to a TV which does not have a video input connector. Be sure to turn off the power of each component before making the connections. -
Page 8: Tv Hookups
TV Hookups This connection is for listening to the sound through TV speakers (2ch – L,R). Refer to the instructions supplied with the component to be connected. CD/DVD player COMPONENT VIDEO OUT VIDEO S VIDEO DIGITAL OUT /B–Y C /R–Y... - Page 9 If you connect the player to a monitor or projector having component video input connectors that conform to output signals from the COMPONENT VIDEO OUT (Y, C connectors on the player Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind.
-
Page 10: Receiver (Amplifier) Hookups
You can use 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (VES: Virtual Enhanced Surround). For details, see page 34. CD/DVD player COMPONENT VIDEO OUT VIDEO S VIDEO DIGITAL OUT /B–Y C... - Page 11 Optical digital connecting cord (not supplied) Take off the cap and plug in the optical digital connecting cord. Receiver (Amplifier) with a digital connector, MD deck, DAT deck, etc. CD/DVD player DIGITAL OUT DIGITAL IN OPTICAL COAXIAL OPTICAL PCM/DTS/MPEG DOLBY DIGITAL (AC-3)
-
Page 12: 5.1 Channel Surround Hookups
5.1 Channel Surround Hookups Some DVDs have a sound track with up to 5.1 channels recorded in Dolby* Digital or MPEG AUDIO format. Using a receiver (amplifier) having 5.1 channel inputs and the 5 (+1) speakers, you can enjoy more real audio presence in the comfort of your own home. - Page 13 CD/DVD player VIDEO S VIDEO COMPONENT VIDEO OUT DIGITAL OUT /B–Y C OPTICAL COAXIAL PCM/DTS/MPEG DOLBY DIGITAL (AC-3) AV Receiver (Amplifier) with DIGITAL TV/LD VIDEO 2 TV/LD IN AC-3 RF 5.1ch inputs DVD IN S-VIDEO S-VIDEO S-VIDEO COAX VIDEO VIDEO...
-
Page 14: Selecting The Language For On-Screen Display
Selecting the Language for On-Screen Display You can select the language for the setup display, the Control Menu display or the messages displayed on the screen. Default setting is “ENGLISH.” SET UP ENTER Press SET UP and select “LANGUAGE SETUP” using >/., and then press ENTER. -
Page 15: Playing Discs
Playing Discs This chapter describes how to play a DVD/CD/VIDEO CD. Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the instructions supplied with your disc. 1/u (POWER) § · Connect headphones. Adjust the headphone volume. - Page 16 Playing Discs You can turn on the player using the remote Press 1/u (POWER) when the indicator above the 1/u (POWER) button on the front panel is lit in red. Notes • If you leave the player or the remote in pause or stop mode for 15 minutes, the screen saver image appears automatically.
-
Page 17: Playing At Various Speeds/Frame By Frame
Playing at Various Speeds/Frame by Frame Using the click shuttle and the JOG button/indicator, you can play back a DVD/CD/VIDEO CD at various speeds or frame by frame. Each time you press JOG, it changes between shuttle mode and jog mode. To change the playback speed (Shuttle mode) Turn the click shuttle. -
Page 18: Resuming Playback From The Point Where You Stopped The Disc (Resume Play)
Playing at Various Speeds/Frame by Frame To play the disc frame by frame changing the playback speed (Jog mode) Press JOG. JOG lights up during jog mode. When you press JOG on the player, it pauses. Turn the click shuttle. Depending on the turning speed, the playback goes to frame-by-frame in the direction that the click shuttle is turned. -
Page 19: Using The Menu For Each Dvd
Notes • Resume Play may not be available depending on the DVD. • Resume Play is not available in Shuffle or Program Play mode. • Depending on where you stopped the disc, the player may resume playback from a different point. •... -
Page 20: Playing Video Cds With Pbc Functions (Pbc Playback)
Using the DVD Menu Using the DVD menu Some DVDs allow you to select the disc contents using the menu. When you play these DVDs, you can select the language for the subtitles, the language for the sound, etc., using the DVD menu. Press DVD MENU. -
Page 21: Using The Front Panel Display
Going back to the menu screen Press ˆ, =, or +. When playing VIDEO CDs with PBC functions PBC playback starts automatically. To cancel PBC playback of a VIDEO CD with PBC functions and play the disc in Continuous Play mode There are two ways. -
Page 22: Checking The Remaining Time
Using the Front Panel Display Playing time and number of the current chapter Digital DISC TITLE CHAPTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 MPEG DTS NTSC TRACK INDEX VIDEO CD ANGLE HOUR REPEAT 1 PGM A–B... -
Page 23: Using Various Functions With The Control Menu
Using Various Functions with the Control Menu This chapter describes how to play discs in various modes and how to use the convenient features of the on- screen menu (Control Menu). Using the Control Menu Display Z Using the Control Menu display, you can select the start point, label a disc, change the angles, adjust the picture, set for Digital Cinema Sound, etc. - Page 24 Using the Control Menu Display Select the item you want using >/., then press / or ENTER. 1 2 ( 2 7 ) 1 8 ( 3 4 ) C 0 1 : 3 2 : 5 5 1: ENGLISH Items To select, press , then...
-
Page 25: Control Menu Item List
Control Menu Item List (DVD only) (page 26) TITLE (DVD only) (page 26) CHAPTER (VIDEO CD/CD only) (page 26) TRACK (VIDEO CD/CD only) (page 26) INDEX (VIDEO CD during PBC playback only) SCENE (page 26) You can search by selecting the title/chapter/track/ index/scene. -
Page 26: Searching For The Title/Chapter/Track/Index/Scene
Control Menu Item List STROBE (DVD/VIDEO CD only) (page 45) PLAYBACK You can display 9 consecutive sections of the disc on the screen. In this case, the sections show still images. TITLE (DVD only) (page 46) VIEWER CHAPTER (DVD only) (page 46) VIEWER (VIDEO CD only) (page 46) TRACK... -
Page 27: Checking The Playing Time And Remaining Time
Press / or ENTER. “ ” is changed to “— — 1 2 ( 2 7 ) PLAY – – ( 3 4 ) C 0 1 : 3 2 : 5 5 Enter with number buttons, then ENTER Select the number of the title, chapter, track, index or scene you want to search for using the number buttons, then press ENTER. -
Page 28: Selecting A Start Point Using The Time Code
Selecting a Start Point Using the Time Code You can search by inputting the time code. Press DISPLAY to select “TIME/TEXT” or “TIME/ MEMO.” The time code corresponds to the approximate actual playing time. For example, to search for a scene 2 hours 30 minutes 20 seconds past the beginning, input 2:30:20. -
Page 29: Checking The Information Of The Disc
Checking the Information of the Disc You can check the DVD TEXT or CD TEXT of the disc on the TV screen and the front panel display. When the disc is a VIDEO CD or the DVD TEXT or CD TEXT is not recorded on the disc, you can label the disc as a Disc Memo and then check it. - Page 30 Checking the Information of the Disc Press ENTER. If you selected a wrong character, press CLEAR. C 0 1 : 3 2 : 5 5 DISC MEMO INPUT BRAHMS ABCDEFGHIJKLMNOPQRSTUVWX YZ 0 1 2 3 4 5 6 7 8 9 < > + – / = ? _ @ To select, press , then ENTER...
-
Page 31: Changing The Sounds
Changing the Sounds Z With DVDs recorded with multilingual sounds, you can select the language you want while playing the DVD. With multiplex CDs or VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. -
Page 32: Displaying The Subtitles
Changing the Sounds The display examples are as follows: •PCM (stereo) C 0 1 : 3 2 : 5 5 1: ENGLISH PROGRAM FORMAT PCM 48kHz 24bits To select, press , then ENTER •Dolby Surround C 0 1 : 3 2 : 5 5 1: ENGLISH PROGRAM FORMAT DOLBY DIGITAL 2/0... -
Page 33: Changing The Angles
Changing the Angles Z With DVDs on which various angles (multi-angles) for a scene are recorded, you can change the angles. For example, while playing a scene of a train in motion, you can display the view from either the front of the train, the left window of the train or from the right window without having the train’s movement interrupted. -
Page 34: Setting For Digital Cinema Sound
Setting for Digital Cinema Sound Z Select the mode to enjoy multi channel surround sound such as Dolby Digital and MPEG. Even if you connect only front speakers, Virtual Enhanced Surround lets you enjoy 3D sound by using 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. - Page 35 ENHANCED SURROUND Provides a greater sense of presence from Pro Logic source with monaural rear channel sound. Produces a stereo like effect in the rear channels. VIRTUAL REAR SHIFT Uses 3D sound imaging to shift the sound of the rear speakers away from the actual speaker position.
-
Page 36: Creating Your Own Program (Program Play)
Creating Your Own Program (Program Play) You can play the contents of the disc in the order you want by arranging the order of the titles, chapters or tracks on the disc and create your own program. One program can be restored in the player and contain up to 99 titles, chapters and tracks. - Page 37 pWhen playing a VIDEO CD or CD Select the track you want to program. Total time of the programmed tracks PROGRAM 0:15:30 ALL CLEAR – – 1. TRACK 0 2 2. TRACK 3. TRACK – – 4. TRACK – – 5.
-
Page 38: Playing In Random Order (Shuffle Play)
Playing in Random Order (Shuffle Play) You can have the player “shuffle” titles or tracks and play them in a random order. The playing order may differ from the previous “shuffling.” Select “SHUFFLE” after pressing DISPLAY. When you select “ON”, the indicator of the “SHUFFLE “ lights in green. -
Page 39: Playing Repeatedly (Repeat Play)
Playing Repeatedly (Repeat Play) You can play all the titles/tracks on a disc or a single title/ chapter/track. In Shuffle or Program Play mode, the player repeats the titles or tracks in the shuffled or programmed order. You cannot do Repeat Play during PBC playback of VIDEO CDs (page 20). - Page 40 Repeating a Specific Portion (A˜B Repeat) Setting a portion for A˜B repeat Select “SET/” in “A-B REPEAT.” The A˜B REPEAT setting display appears. 1 2 ( 2 7 ) PLAY 1 8 ( 3 4 ) C 0 1 : 3 2 : 5 5 To select, press , then ENTER...
-
Page 41: Checking The Play Information
Checking the Play Information Z You can check the play information on the bit rate, bit rate history, the portion where the disc is played (layer). While playing a disc, the approximate bit rate of the playback picture is always displayed by Mbps (Mega bit per second) and the audio by Kbps (Kilo bit per second). - Page 42 Checking the Play Information LAYER Appears when the DVD has dual-layer Indicates where the disc is played. When the DVD has dual-layer, the player indicates which layer is being read. For details on layer, see page 68.
-
Page 43: Reducing The Picture Noise (Dnr: Digital Video Noise Reduction)
Reducing the Picture Noise (DNR: Digital Video Noise Reduction) Z You can make the picture clearer by reducing the picture noise of the background. Select “DNR” after pressing DISPLAY. When you select “DNR1,” “DNR2,” or “DNR3,” the indicator of the “DNR “ lights in green. 1 2 ( 2 7 ) 1 8 ( 3 4 ) C 0 1 : 3 2 : 5 5... - Page 44 Adjustments for Playback Picture (VIDEO EQ) Select “MEMORY/” in “VIDEO EQ.” The video control display appears. 1 2 ( 2 7 ) PLAY 1 8 ( 3 4 ) C 0 1 : 3 2 : 5 5 STANDARD STANDARD DYNAMIC CINEMA MEMORY...
-
Page 45: Displaying Different Angles Simultaneously
Displaying Different Angles Simultaneously Z With DVDs on which various angles (multi-angles) for a scene are recorded, you can display all the angles recorded on the disc on the same screen, and start playback in continuous mode at the chosen angle directly. The angles are displayed on a screen divided in 9 sections. -
Page 46: Scanning The Title, Chapter And Track
Scanning the Title, Chapter and Track Z You can check the top picture of titles, chapters and tracks of the disc on a screen divided in 9 sections, and start playback from the chosen title ,chapter or track. Select “TITLE VIEWER”(DVD only), “CHAPTER VIEWER”(DVD only) or “TRACK VIEWER”(VIDEO CD only) after pressing DISPLAY. -
Page 47: Settings And Adjustments
Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SET UP menu. Most settings and adjustments are required to be set when you first use the player. This chapter also describes how to set the remote for controlling the TV or the AV receiver (amplifier). - Page 48 Using the Setup Display Select the main item you want using >/., and then press ENTER. The selected main item is highlighted. LANGUAGE SETUP OSD: DVD MENU: AUDIO: SUBTITLE: Main item To set, press , then To quit, press SETUP SCREEN SETUP TV TYPE: SCREEN SAVER:...
-
Page 49: Setup Display Item List
Setup Display Item List Default settings are underlined. LANGUAGE SETUP (page 50) ENGLISH CHINESE 1 CHINESE 2 DVD MENU ENGLISH CHINESE JAPANESE FRENCH GERMAN ITALIAN SPANISH DUTCH DANISH SWEDISH FINNISH NORWEIGEN PORTUGUESE RUSSIAN OTHERS / AUDIO ORIGINAL (same as DVD MENU) SUBTITLE AUDIO FOLLOW (same as DVD MENU) -
Page 50: Setting The Language For Display And Sound (Language Setup)
Setting the Language for Display and Sound (LANGUAGE SETUP) Z Select “LANGUAGE SETUP” after pressing SET UP. “LANGUAGE SETUP” allows you to set various languages for on-screen display or sound. Default settings are underlined. Note When you select a language that is not recorded on the DVD, one of the recorded languages is automatically selected except for the “OSD”. -
Page 51: Settings For Display (Screen Setup)
Settings for Display (SCREEN SETUP) Z Select “SCREEN SETUP” after pressing SET UP. “SCREEN SETUP” allows you to set the display according to the playback conditions. Default settings are underlined. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: JACKET PICTURE STARTUP SCREEN: To set, press , then ENTER... -
Page 52: Custom Settings (Custom Setup)
Settings for Display (SCREEN SETUP) Storing the picture in memory During playback, when you find the scene to be stored in memory, press PICTURE MEMORY on the remote. The picture is stored in memory. Notes • The player can store in memory only one scene. The stored picture appears in both the background and the startup screen. - Page 53 pDIMMER Adjusts the lighting of the front panel display. • BRIGHT: makes the front panel display bright. • DARK: makes the front panel display dark. • OFF: turns off the lighting of the front panel display. pPAUSE MODE (DVD only) Selects the picture in pause mode.
- Page 54 Custom Settings (CUSTOM SETUP) Enter a password in 4 digits using the number buttons, then press ENTER. The digits change to asterisks ( ), and the display for confirming the password appears. CUSTOM SETUP PARENTAL CONTROL To confirm,enter password again, then press ENTER To return, press...
- Page 55 You can turn off the Parental Control function just after inserting the DVD (Parental Control Temporarily Canceled) When you set a playback limitation level and insert the DVD, the PARENTAL CONTROL display appears. Enter the password to turn off the Parental Control function. When you stop playing the DVD, the level returns to the original level.
-
Page 56: Settings For Sound (Audio Setup)
Settings for Sound (AUDIO SETUP) Select “AUDIO SETUP” after pressing SET UP. “AUDIO SETUP” allows you to set the sound according to the playback conditions. Default settings are underlined. AUDIO SETUP AUDIO ATT: AUDIO FILTER: AUDIO DRC: TRACK SELECTION: DOWNMIX: DOLBY SURROUND DIGITAL OUT: DOLBY DIGITAL:... - Page 57 pDOWNMIX* Switches the mixing down methods when you play a DVD on which the sound in Dolby Digital format is recorded. • DOLBY SURROUND: when the player is connected to an audio component that conforms to Dolby Surround (Pro Logic). •...
- Page 58 Settings for Sound (AUDIO SETUP) pMPEG Selects output MPEG AUDIO signals via the DIGITAL OUT OPTICAL and COAXIAL connectors. You cannot select this item when you set “DIGITAL OUT” to “OFF.” • PCM: when the player is connected to an audio component lacking a built-in MPEG decoder.
-
Page 59: Speaker Set Up
Speaker Set Up Select “SPEAKER SETUP” after pressing SET UP. To obtain the best possible surround sound, first specify the size of speakers you have connected and their distance from your listening position and set the balance and level. Then use the test tone to adjust the speaker volumes to the same level. - Page 60 Setting for Speakers (SPEAKER SETUP) pBALANCE You can vary the balance of each speaker as follows. Default adjustments are in the parentheses. • FRONT (0dB) Adjust the balance between the front left and right speakers (-6dB [L] to +6dB [R], 0.5dB steps). •...
-
Page 61: Controlling The Tv Or The Av Receiver (Amplifier) With The Supplied Remote
• If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote commander, the code number may reset to 01 (Sony). Reset the appropriate code number. Manufacturer... - Page 62 TV 1/u Hold down 1/u (POWER), and enter your AV receiver’s manufacturer’s code (see the table TV/VIDEO below) using the number buttons. Then release 1/ WIDE MODE u (POWER). Manufacturer Sony Denon Kenwood Onkyo Pioneer Sunsui Technics Yamaha Code numbers of controllable receivers...
-
Page 63: Additional Information
The picture noise appears. / Clean the disc. / If video from your DVD player has to go through your VCR to get to your TV, the copy-protection applied to some DVD programs could affect picture quality. - Page 64 Troubleshooting The numbers or letters of 5 characters are displayed on the front panel display. / Self diagnosis function was activated. See the table in page 66 and treat the player appropriately. Sound There is no sound. / Check that the player is connected securely. / The audio connecting cord is damaged.
- Page 65 / In the set up display, “DIMMER” in “CUSTOM SETUP” is set to “OFF.” Set “DIMMER” to “BRIGHT” or “DARK.” (page The disc tray does not open and “LOCKED” is displayed on the front panel display. / Contact your Sony dealer or local authorized Sony service facility.
-
Page 66: Self-Diagnosis Function
•The disc is not inserted correctly. /Open the disc tray and insert the disc correctly. •To prevent the player from malfunctioning, the self-diagnosis function has worked. /When you contact your Sony dealer or local authorized Sony service facility, give the 5-character service number. (example: E:61:10) -
Page 67: Specifications
Specifications CD/DVD player Laser Semiconductor laser Signal format system NTSC /PAL Audio characteristics Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±0.5 dB)* DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 CD: 2 Hz to 20 kHz (±0.5 dB) -
Page 68: Glossary
Digital Cinema Sound (DCS) (page 34) The general name of technology that Sony developed to enjoy the surround sound in a home. To enjoy the surround sound of a movie theater in the comfort of your own home, it simulates the sound not in a concert hall as usual but in a movie editing studio. - Page 69 Title (page 5) The longest sections of a picture or a music piece on a DVD; a movie, etc., for a picture piece on video software; or an album, etc., for a music piece on an audio software. Each title is assigned a title number enabling you to locate the title you want.
-
Page 70: Language Code List
Language Code List For details, see page 32, 50. Code Language Code Language 1027 Afar 1186 Scots Gaelic 1194 Galician 1028 Abkhazian 1032 Afrikaans 1196 Guarani 1203 Gujarati 1039 Amharic 1209 Hausa 1044 Arabic 1045 Assamese 1217 Hindi 1051 Aymara 1226 Croatian 1229... -
Page 71: Index To Parts And Controls
Index to Parts and Controls Refer to the pages indicated in parentheses for details. Front Panel 1 g (remote sensor) (7) Accepts the remote control signals. 2 1/u (POWER) button and indicator (15) Turns on and off the power of the player. 3 VIRTUAL 3D SURROUND button/indicator (35) Selects the item of “VIRTUAL 3D SURROUND.”... - Page 72 Index to Parts and Controls Rear Panel COMPONENT VIDEO OUT VIDEO S VIDEO DIGITAL OUT OPTICAL COAXIAL PCM/DTS/MPEG DOLBY DIGITAL (AC-3) 1 DIGITAL OUT (OPTICAL) connector (11) Connects to an audio component using the optical digital connecting cord. 2 DIGITAL OUT (COAXIAL) connector (11) Connects to an audio component using the coaxial digital connecting cord.
- Page 73 Remote 1 SET UP button (47) Displays the setup display on the TV screen to set or adjust the items. 2 6OPEN/CLOSE button (15) Opens or closes the disc tray. 3 Number buttons Selects the items or settings. 4 CLEAR button (37, 38, 39) Press to return to the continuous play etc.
-
Page 74: Index
Index Numerics 4:3 LETTER BOX 51 4:3 PAN SCAN 51 5.1 Channel Surround 12, 34 16:9 51 A-B REPEAT 39 A˜B Repeat 39 Angle 33, 45 ANGLE 33 ANGLE VIEWER 45 AUDIO 31, 50 AUDIO ATT 56 AUDIO DRC 56 AUDIO FILTER 56 AUDIO SETUP 56 AUTO PLAY 52... - Page 76 Sony Corporation Printed in Japan...