hit counter script
Xerox N24 Technical Instructions
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer
  5. DocuPrint N24
  6. Technical instructions
Xerox N24 Technical Instructions

Xerox N24 Technical Instructions

Hide thumbs Also See for N24:

Advertisement

Table of Contents

See also: Service Manual , Function Manual
N24/3240TECH
Technical Instructions
CORPORATE
LOS ANGELES
T 800 394.9900
818 837.8100
F 800 394.9910
818 838.7047
ATLANTA
T 877 676.4223
770 516.9488
F 877 337.7976
770 516.7794
DALLAS
T 877 499.4989
972 840.4989
F 877 774.1750
972 840.1750
MIAMI
T 800 595.4297
305 594.3396
F 800 522.8640
305 594.3309
NEW YORK
T 800 431.7884
631 345.0121
F 800 431.8812
631 345.0690
SANFORD
T 800 786.9041
919 775.4551
F 800 786.9049
919 775.4584
TORONTO
T 877 848.0818
905 712.9501
F 877 772.6773
905 712.9502
BUENOS AIRES
T 0810.444.2656
011 4583.5900
F 011.4584.3100
MELBOURNE
T 1 800 003 100
F 1 800 004 302
SYDNEY
T 02 9648.2630
F 02 9648.2635
Brand names and trademarks are the
properties of their respective holders
and are for descriptive use only.
Technical Resource Center:
Printers
Compaq LN32/LNM40
Xerox Docuprint N24/32/40
Xerox DocuCentre 220/230/332/340
IBM InfoPrint 32/40
QMS 3260/4032
Dataproducts
Genicom Microlaser 320/320N
Photo 1
Photo 2
Photo 3
Photo 4
Toll Free:
800 394.9900
Supplies
108473-B2, 113R173
113R120, 13R273
113R274, 90H3566
1710307-001, 113R00173
5A6530P01
Step 1
Place the cartridge on the workbench so
the handle is up and the fill plug is facing
you. (See Photo 1)
Using diagonal cutters remove the
cartridge pin that holds the two sections
of the cartridge together. (See Photo 2)
Step 2
Rotate the cartridge 180°. Remove the
cartridge pin from the gear side of the
cartridge. (See Photo 3)
Step 3
Grab the waste hopper by the handle
and lift the hopper off of the toner
hopper. (See Photo 4)
Website:
www.futuregraphicsllc.com
Tools
1
Diagonal Cutters
Needle Nose Pliers
Philips Screwdriver
Small Flat Blade Screwdriver

Advertisement

Table of Contents
loading

Related Manuals for Xerox N24

Summary of Contents for Xerox N24

  • Page 1 Printers Supplies Tools 108473-B2, 113R173 Diagonal Cutters Compaq LN32/LNM40 113R120, 13R273 Needle Nose Pliers CORPORATE Xerox Docuprint N24/32/40 LOS ANGELES 113R274, 90H3566 Philips Screwdriver Xerox DocuCentre 220/230/332/340 T 800 394.9900 1710307-001, 113R00173 Small Flat Blade Screwdriver IBM InfoPrint 32/40 818 837.8100...

  • Page 2: Table Of Contents

    Xerox N24/32/40 Technical Instructions Step 4 Using a Philips screwdriver remove the Photo 6 Photo 5 two screws holding the drum axle hub on the contact side of the waste hopper. (See Photo 5). Remove the drum axle hub. (See Photo 6)

  • Page 3: Step

    Xerox N24/32/40 Technical Instructions Photo 15 Step 10 Step 10: Dump out the waste toner from the hopper. Using dry com- Step 15 pressed air or a vacuum clean out the Using a cotton swab and alcohol waste hopper. clean the PCR contact cradle.

  • Page 4: Hub. (See Photos

    Xerox N24/32/40 Technical Instructions Photo 24 Step 19 Remove the screw that holds the mag roller end cap on the gear end of the Step 17 mag roller. (See Photo 24) Remove the Install the drum axle hubs on end cap.

  • Page 5: See Photo

    Xerox N24/32/40 Technical Instructions Photo 29 Step 25 Remove the four screws found along the top of the toner hopper. (See Photo 29) Step 30 Using dry compressed air or a vacuum clean out the toner hopper and the toner hopper cover.

  • Page 6: Release The Four Clips (Two On

    Xerox N24/32/40 Technical Instructions Photo 38 Step 34 Using needle nose pliers grab the metal toner agitator bar and pull it from the Step 32 agitator gear. (See Photo 38) Release the four clips (two on the top and two on the bottom) that hold the contact end cap to the hopper.

  • Page 7: Photo

    Xerox N24/32/40 Technical Instructions Photo 43 Step 39 With the seal pull tab through the seal exit port, use needle nose pliers to hold Step 44 the agitator bar in the correct position while reinstalling the seal exit port plug.

  • Page 8: Photo

    Xerox N24/32/40 Technical Instructions Photo 50 Step 48 Step 46 Replace or reset the cartridge Grab the waste hopper by the handle chip, check with your supplier and lower the waste hopper onto the for your best option. toner hopper. Once the two sections...

  • Page 9: Step

    Xerox cartridges do not. If the cartridge is tilted on its end after the seal is pulled toner will leak out from the Problem #2: ends of the mag roller.
  • Page 10 Xerox N24/32/40 Engine fact Sheet Xerox N24/32/40 | OEM Cartridge Number: 90H3566 (IBM), 1710307-001 (QMS), 113R173 (Xerox) IBM Infoprint 24/32/40, QMS 3260/4032, Xerox Docuprint N24/32/40 Product Description Item # Pack Qty. Chip - MultEPROM Reset Epson LP-9600/N4000 Reprogrammed Exchange EPSONXCCHIPX...

This manual is also suitable for:

N32N40

Table of Contents