hit counter script
Sony HDW-S2000 Operation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. VCR
  5. HDW-S2000
  6. Operation manual
Sony HDW-S2000 Operation Manual

Sony HDW-S2000 Operation Manual

Sony hd digital videocassette recorder operation manual hdw-s2000, hdw-s2000p
Hide thumbs Also See for HDW-S2000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
HD DIGITAL VIDEOCASSETTE RECORDER
HDW-S2000
HDW-S2000P
OPERATION MANUAL
[English]
1st Edition (Revised 1)

Advertisement

Table of Contents
loading

Related Manuals for Sony HDW-S2000

Summary of Contents for Sony HDW-S2000

  • Page 1 HD DIGITAL VIDEOCASSETTE RECORDER HDW-S2000 HDW-S2000P OPERATION MANUAL [English] 1st Edition (Revised 1)
  • Page 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. THIS APPARATUS MUST BE EARTHED. AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à...
  • Page 3 WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES. 1. Use the approved Power Cord (3-core mains lead)/ Appliance Connector/Plug with earthing-contacts that conforms to the safety regulations of each country if applicable. 2. Use the Power Cord (3-core mains lead)/Appliance Connector/Plug conforming to the proper ratings (Voltage, Ampere).

  • Page 5: Table Of Contents

    Table of Contents Chapter 1 Overview Chapter 2 Location and Function of Parts Chapter 3 Preparations Chapter 4 Recording and Playback Chapter 5 Editing 1-1 Features ... 1-1 1-2 Example System Configuration ... 1-4 2-1 Control Panels ... 2-1 2-1-1 Upper Control Panel ... 2-3 2-1-2 Lower Control Panel ...
  • Page 6 Table of Contents Chapter 6 Shot Mark Function Chapter 7 Tele-File Chapter 8 UMID Functions Chapter 9 Function Menu Chapter 10 Setup Menus Chapter 11 Maintenance and Inspection Appendix Table of Contents 6-1 Overview ... 6-1 6-2 Shot Mark Operation Menu ... 6-3 6-3 Shot Mark Operations ...

  • Page 7: Overview

    1-1 Features The HDW-S2000/S2000P is a high-definition (HD) digital videocassette recorder based on the HDCAM format. This unit uses large scale integrated circuits for signal processing, and has a simple internal construction, allowing it to provide functionality at least equivalent to a conventional VTR in a compact (4U size), lightweight, and low power consumption design.
  • Page 8 1-1 Features High-performance heads and compatibility functions The newly developed high-performance heads and dynamic tracking (DT) technology provide high- density recording and playback in narrow tracks with high reliability. In addition to HDCAM recording and playback heads, the unit is equipped with Betacam SX playback heads and analog Betacam DT heads, for compatibility with existing recording formats.
  • Page 9 High quality variable speed playback and digital jog sound function In HDCAM format playback, the dedicated playback DT heads allow smooth, noiseless playback. During Betacam SX playback, noiseless playback is achieved through unique multihead playback technology. In slow motion operation, the digital jog sound function provides the same ease of operation as for a conventional analog VTR.

  • Page 10: Example System Configuration

    1-2 Example System Configuration 1-1 Features The following conceptual diagram shows an example of use. Digital cassette HDW-S2000/S2000P HDSDI/Analog composite Video monitor Analog audio Audio monitor Chapter 1 Overview BVE-series editor Tape control SDTI (optional) HDSDI HDSDI SDTI (optional) Analog composite/component...

  • Page 11: Location And Function Of Parts

    2-1 Control Panels There are three control panels, as follows: • Upper control panel • Lower control panel • Switch panel VID. IN CONTROL PANEL KEY INHI PANEL SEL REAR FRONT Location and Function of Parts 59.94 PB/EE CONFI CTL/TC MENU TCGSET DISABL...
  • Page 12 2-1 Control Panels To open the lower control panel Push in the lower control panel unlock buttons to open the lower control panel. You can fix the lower control panel in any of five positions between vertical and horizontal. Lower control panel unlock buttons To close the lower control panel Push up the folding levers on both sides at the same time allowing the lower control panel to close.

  • Page 13: Upper Control Panel

    2-1-1 Upper Control Panel 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button REMOTE POWER EJECT 1(9P) 2(50P) RS-232C PHONES 5 PHONES jack and control 1 POWER switch Pressing the ‘ ) ’ side of the switch powers the unit on. When the unit is powered on, the audio setting display section (see page 2-5) and the time data/menu display section (see page 2-8) light.

  • Page 14: Lower Control Panel

    2-1 Control Panels 2-1-2 Lower Control Panel 2 CHANNEL CONDITION 1 Audio control section (see page 2-5) qf Shot mark section (see page 2-14) Chapter 2 Location and Function of Parts 4 Time data/menu display section (see page 2-8) 5 MULTI CONTROL knob and PUSH/ indicator (see page 2-7) 3 Menu control buttons (see page 2-7)
  • Page 15 1 Audio control section 1 Audio selection function selector buttons 2 DISPLAY FULL/FINE button 3 Audio setting display section 4 Audio monitor 6 PB controls 5 REC controls 1 Audio selection function selector buttons INPUT (input signal selection mode) button: Pressing this button puts the unit into input signal selection mode.
  • Page 16 2-1 Control Panels DATA indicator: Lights when the audio output signals are recognized as data with the unit in recording, E-E , or playback mode. OVER indicator: While the unit is in recording or playback mode, this lights when the level of the audio signal on the corresponding channel exceeds the maximum level that can be indicated on the level meter.
  • Page 17 5 REC (recording) controls These individually adjust the recording levels on channels 1 to 4, and cue audio. To set the recording level, put the unit into E-E mode, press to protrude the control knobs and adjust the level while watching the level meters. When the control knobs are pushed in, the recording levels return to the preset levels and cannot be adjusted.
  • Page 18 2-1 Control Panels 4 Time data/menu display section 1 Time data display 59.94 VID. IN PB/EE CONFI CTL/TC DISABL 2 Menu display 1 Time data display This displays indicators relating to time data and other indicators. Time data display area 1 Time data type indicator DF indicator LTC indicator...

  • Page 19: Reset Button

    CONFI (ON)/PREREAD indicators These indicate the state of the VTR CONFI playback function. When the CONFI playback function is enabled, the CONFI indicator appears, and when CONFI playback is actually being carried out the CONFI ON indicator also appears. When F6 (PREREAD) is set to ON in function menu page 4, the CONFI playback function is disabled and one of the following is displayed.
  • Page 20 2-1 Control Panels 1 SHUTTLE button To use the search dial for playback in shuttle mode, press this button, turning it on. For details of playback in shuttle mode, see the description of the search dial 5. 2 JOG button To use the search dial for playback in jog mode, press this button, turning it on.

  • Page 21: Tape Transport Control Section

    8 REC INHI (recording inhibit) indicator This indicator is on or off according to the combination of the F5 (RECINH) setting on function menu page 4 and the record inhibit plug on the cassette, as shown in the following table. When this indicator is on, recording on tape is prohibited.
  • Page 22 2-1 Control Panels 5 STOP button To stop recording or playback, press this button, turning it on. When you stop playback, the unit switches either to still playback or to E-E mode according to the setting on function menu HOME page for F2 (PB/EE) and the setting of setup menu item 108.
  • Page 23 qa ALARM indicator and KEY INHI indicator ALARM indicator This lights when a hardware error is detected on the unit, and goes off when the error is resolved. When this indicator is lit, an error message appears in the time data/menu display section. If you are using the HDSDI OUTPUT 3 (SUPER), SDI OUTPUT 3 (SUPER) or COMPOSITE VIDEO OUTPUT 3 (SUPER) connector, then when the setting of F4...
  • Page 24 2-1 Control Panels 4 TRIM buttons Use these buttons to trim an edit point to single-frame precision. Hold down the IN, OUT, AUDIO IN, or AUDIO OUT button, and press one of these buttons. The ‘+’ button advances the corresponding edit point by one frame, and the ‘–’...

  • Page 25: Switch Panel

    2-1-3 Switch Panel To access the switch panel, open the lower control panel. On how to open the lower control panel, see the figure on page 2-2. 1 Memory stick slot Use this to update the firmware. You can also save or load setup menu settings onto the memory stick.

  • Page 26: Connector Panel

    2-2 Connector Panel 2-2 Connector Panel Cooling fan 1 Analog audio input/output section 7 Time code input/output section (see page 2-19) 8 Audio monitor signal output section (see page 2-19) 1 Analog audio input/output section 1 AUDIO INPUT CH1 to CH4 connectors 2 AUDIO INPUT CH1 to CH4 LEVEL switches AUDIO INPUT LEVEL...
  • Page 27 2 Analog video input/output section REF INPUT INPUT 1125/525 75Ω 1 REF.VIDEO INPUT connectors and 75Ω termination switch VIDEO OUTPUT COMPOSITE COMPONENT 2 COMPONENT VIDEO OUTPUT connectors (SUPER) 3 COMPOSITE VIDEO OUTPUT connectors 1 REF. (reference) VIDEO INPUT connectors (BNC type) and 75Ω termination switch Input a reference video signal.
  • Page 28 2-2 Connector Panel 4 Digital signal input/output section 1 HDSDI INPUT connectors HDSDI INPUT OUTPUT 2 HDSDI OUTPUT connectors INPUT MONITOR 3(SUPER) SDTI OUTPUT INPUT 3 SDTI INPUT connector OUTPUT 3(SUPER) 4 SDTI OUTPUT connectors 5 SDI OUTPUT connectors 1 HDSDI (HD Serial Digital Interface) INPUT connectors (BNC type) The upper of these two connectors inputs HD format video/audio signals.
  • Page 29 1 REMOTE 2 PARALLEL I/O(50P) connector (D-sub 50-pin) Connect remote control signals from an external device. For details, refer to the Installation Manual. 2 CONTROL PANEL connector (round type, 10- pin) In addition to the lower control panel, a similar control panel can be connected to this unit.
  • Page 30 2-2 Connector Panel 1 MONITOR OUTPUT R connector (XLR 3-pin, male) This outputs the audio signals whose output destination was set to ‘R’ with the audio monitor signal selection buttons in the audio control section. If multiple tracks have been set to ‘R’, the signals of those tracks are mixed for output.

  • Page 31: Preparations

    This unit can input serial digital signals (video and audio) from another digital VTR such as the HDW- 500/F500/M2100/M2100P. The following example shows the connections with another HDW-S2000/ S2000P unit as a player, with this unit used as recorder. Preparations...
  • Page 32 3-1 Connections to External Devices Reference signal REF. VIDEO INPUT REF. VIDEO INPUT HDW-M2100/M2100P (player) REF. VIDEO INPUT HDW-S2000/S2000P (recorder) Chapter 3 Preparations 75 Ω termination switch: OFF HDSDI OUTPUT 75Ω REMOTE 1-IN(9P) 75Ω termination switch: ON REMOTE 1-OUT(9P) HDSDI INPUT 75Ω...

  • Page 33: Reference Sync Signals

    3-2 Reference Sync Signals This section describes how reference signals for the video output signals and servo system are selected. The output from the internal reference video signal 3-2-1 Selecting Reference Signal Depending on Operational Status The reference signal selection switches automatically between REF and INPUT depending on the menu Menu item 309 setting Menu item 334 setting Unit’s operational F2 (OUTREF) setting...

  • Page 34: Connecting Reference Signals

    Reference signal 75 Ω termination switch: OFF REF. VIDEO INPUT HDW-S2000/S2000P (recorder) Chapter 3 Preparations • When there is no reference video signal input whereas REF is selected for OUTREF, no external reference signal is used. In this case, the unit synchronizes to the internally generated reference signal.
  • Page 35 • Connections for playback 75 Ω termination switch: ON HDW-S2000/S2000P SD video monitor HD video monitor • SDI OUTPUT • COMPOSITE • COMPONENT 75Ω REF. VIDEO INPUT Reference signal HDSDI OUTPUT Chapter 3 Preparations...

  • Page 36: Setup

    3-3 Setup The principal setup operations before operating this unit can be carried out using setup menus. The setup menus of this unit comprise a basic setup menu and an extended setup menu. The contents of these menus are as follows. Basic setup menu: •...

  • Page 37: Superimposed Character Information

    3-4 Superimposed Character Information When the function menu item CHARA is set to ON, the video signal output from the HDSDI OUTPUT 3 (SUPER) connector, SDI OUTPUT 3 (SUPER) connector, or COMPOSITE VIDEO OUTPUT 3 (SUPER) connector contains superimposed character information, including time code, menu settings, and alarm messages.
  • Page 38 3-4 Superimposed Character Information 2 Time code reader drop frame mark (for 59.94i, 29.97PsF mode only) “.”: Indicates drop frame mode “:”: Indicates non-drop-frame mode 3 Time code generator drop frame mark (for 59.94i, 29.97PsF mode only) “.”: Indicates drop frame mode (factory preset) “:”: Indicates non-drop-frame mode 4 VITC field mark “...

  • Page 39: Cassettes

    3-5 Cassettes 3-5-1 Cassette Types This unit uses the following HDCAM cassettes for both recording and playback. HDCAM cassettes Small cassettes BCT-6HD/12HD/22HD/32HD/40HD Large cassettes BCT-34HDL/64HDL/94HDL/124HDL This unit can also play back the following cassettes. • Betacam SX cassettes • Betacam SP cassettes (metal tape) •...

  • Page 40: Preventing Accidental Erasure Of Recordings

    3-5 Cassettes 3-5-3 Preventing Accidental Erasure of Recordings To prevent a tape from being inadvertently erased, press in the red record inhibit plug on the cassette. Large cassette Small cassette Press in the red record inhibit plug. (“ON”) Return this plug to its original position to enable recording on the tape again.

  • Page 41: Using A Memory Stick

    3-6 Using a Memory Stick When a Memory Stick is inserted in the VTR, the file data can be stored on the Memory Stick, which enables you to share data among cameras. Note Use a Memory Stick formatted with this VTR. It cannot be shared with other devices.
  • Page 42 Memory Stick. This may damage the data. For details, refer to the Maintenance Manual. • Memory Stick and are the trademarks of Sony Corporation. • MagicGate Memory Stick and trademarks of Sony Corporation. 3-12 Chapter 3 Preparations are the...

  • Page 43: Recording And Playback

    4-1 Recording This section describes video and audio recording on the unit. 4-1-1 Preparations for Recording Switch and menu settings Before beginning recording, make necessary switch and menu settings. For details on each setting, see the pages indicated in parenthesis. Recording and Playback Chapter...
  • Page 44 4-1 Recording POWER switch: ‘I’ side (on) REMOTE buttons (see page 2-3) : off Audio monitor signal selection buttons (see page 2-6) : Select the audio channel to be monitored. Audio selection function selector buttons (see page 2-5) : Select the input audio signal. Chapter 4 Recording and Playback CONFI (ON)/PREREAD indicators (see page 2-9) : lit 59.94...

  • Page 45: Recording Time Code And User Bit Values

    Adjusting the audio recording levels When carrying out audio recording at a reference level Leave the REC controls pressed in. The audio signals will be recorded at a preset reference level (a reference –20 dB indication for an input of +4 dBm). Manually adjusting the recording levels For each channel, press to protrude the REC control in the upper control panel, and adjust so that the audio...
  • Page 46 4-1 Recording Setting an initial time code value Use the following procedure. RESET button 1,2,3,4,5,6 Set the CTL/TC to TC. Press the F6 (TCGSET) button. The function menu display changes as follows. 00 : 00 : 00 : 00 The first digit of the time code value (8 digits: hours, minutes, seconds, and frames) flashes.

  • Page 47: Recording Procedure

    To synchronize the internal time code generator to an external signal Use this method to synchronize the time code generators of a number of VTRs, or to record the playback time code signal from an external VTR without deterioration of the signal waveform. In this case the RUN and DF settings are ignored.

  • Page 48: Playback

    4-2 Playback This section describes playback of video and audio. 4-2-1 Preparations for Playback Switch and menu settings Before beginning playback, make necessary switch and menu settings. POWER switch: ‘I’ side (on) REMOTE buttons (see page 2-3) : off PB controls (see page 2-7) : Adjust the audio playback levels.

  • Page 49: Playback Procedures

    Time data selection Displayed time data Use the CTL/TC setting in function menu HOME page to select one of CTL (control), time code, and user bit values. When you select time code, the data displayed is determined by the F6 (TCR) setting (LTC/AUTO/ VITC) in function menu page 1 as follows.
  • Page 50 4-2 Playback Playback in jog mode In jog mode, you can control the speed of playback by the speed of turning the search dial. The playback speed range is ±1 times normal speed. The playback speed range can be ±3 times normal speed by changing the setting of setup menu item 116.
  • Page 51 To alternate between normal-speed playback and shuttle mode playback Set the search dial to the position corresponding to the desired shuttle playback speed, then switch between normal-speed playback and shuttle playback by pressing the PLAY and SHUTTLE buttons alternately. For intermittent shuttle mode playback, press the STOP and SHUTTLE buttons alternately.
  • Page 52 4-2 Playback To perform continuous capstan override playback Set setup menu item 111 (TSO PLAY) to TSO. Hold down the DMC EDIT button and turn the MULTI CONTROL knob to select the playback speed. The selected playback speed is displayed in time data display area 2 on the lower control panel of this unit as well as in the character information display on the monitor screen.

  • Page 53: Dynamic Motion Control (Dmc) Playback

    4-2-3 Dynamic Motion Control (DMC) Playback Overview DMC playback allows you to vary the playback speed for a certain section of a tape, in variable speed mode (from –1 to +2 times normal speed) and store the varying speed in memory for later playback at the same varying speed.
  • Page 54 4-2 Playback Press the search dial or the SHUTTLE button or VAR button to enter shuttle/variable speed mode. The SHUTTLE/VAR indicator lights. Note Make sure that setup menu item 111 (TSO PLAY) is set to DIS. Holding down the DMC EDIT button, turn the search dial, to set the initial speed at the playback start point.
  • Page 55 To start playback immediately after preroll Press the PREVIEW button. The PREVIEW button lights, and after preroll, DMC playback is carried out for the section from the speed variation start point, then playback continues at normal speed from the speed variation end point. To stop the tape during DMC playback Press the STOP button.

  • Page 57: Editing

    5-1 Automatic Editing This section describes how to carry out automatic editing with this unit and another VTR connected to the REMOTE1-IN(9P) connector. 5-1-1 Overview Editing mode With this unit, you can use the following two edit modes for automatic editing. •...
  • Page 58 5-1 Automatic Editing Sequence of editing operations The following flowchart outlines the sequence of operations in automatic editing with two VTRs. Selecting the editing mode (page 5-4) Setting the recorder and player edit points (page 5-4) Previewing the edit segments (page 5-8) Amending edit points as necessary (page 5-7) Carrying out automatic editing (page 5-9) Checking the editing results as necessary (page 5-10)

  • Page 59: Switch And Menu Settings

    5-1-2 Switch and Menu Settings Before beginning editing, make necessary switch and menu settings. Recorder settings POWER switch: ‘I’ side (on) REMOTE buttons (see page 2-3) : 1(9P) ASSEMBLE button (see page 2-12) : lit REC controls (see page 2-7) : Adjust the audio recording levels.

  • Page 60: Selecting The Editing Mode

    5-1 Automatic Editing 5-1-3 Selecting the Editing Mode To select the editing mode Select assemble editing or insert editing. ASSEMBLE button INSERT buttons IN/OUT buttons Depending on the editing mode, press the following button or buttons. • For assemble editing: ASSEMBLE button •...
  • Page 61 Setting split edit points In split editing, you can set the edit points for audio and video independently. Set the audio edit points with the AUDIO IN/OUT buttons, and the video edit points with the IN/OUT buttons. Note that split editing is only possible when the recording mode is insert editing.
  • Page 62 5-1 Automatic Editing When the audio IN point is not set for insert editing of audio only As long as the audio OUT point is set, the VTR is ready for preview or editing. If the audio IN point has not been set, the current tape position is automatically used as the audio IN point.

  • Page 63: Modifying And Deleting Edit Points

    5-1-5 Modifying and Deleting Edit Points If the edit points are not set correctly, for example if an OUT point is before a corresponding IN point, the DELETE button flashes, and it is not possible to carry out a preview or editing operation. In this case, either modify the erroneous edit point, or first delete it and then enter it correctly.

  • Page 64: Cue-Up To Edit Points And Preroll

    5-1 Automatic Editing 5-1-6 Cue-up to Edit Points and Preroll To preroll for the edit IN point or to cue up to any edit point, use the following procedure. Press the RECORDER button or PLAYER button to select the VTR on which you wish to operate. The button which you have pressed lights.

  • Page 65: Carrying Out Automatic Editing

    Monitor output During a preview, on a monitor connected to the recorder you can monitor the following video and audio. • From the preroll point to the IN point, you can monitor the playback from the recorder. • From the IN point to the OUT point, you can monitor the playback from the player through the recorder in E-E mode.
  • Page 66 5-1 Automatic Editing The following figure illustrates this. IN point OUT point Playback E-E mode (recorder) (player) Using a single monitor for video and audio on both player and recorder For efficient editing if only one monitor is available, use the following method. Connect the monitor to the recorder.
  • Page 67 After automatic editing, to adjust the edit points and reexecute the edit Hold down the DELETE button and press the ENTRY button to recall the edit points. After adjusting the edit points, press the AUTO EDIT button to carry out the edit again.

  • Page 68: Dmc Editing

    5-2 DMC Editing By controlling the player playback speed from the recorder, you can achieve variable speed editing. 5-2-1 Overview of DMC Editing Conditions for DMC editing DMC editing can be used for insert or assemble editing, but not for audio split editing. Preroll Recorder Playback...

  • Page 69: Carrying Out Dmc Editing

    5-2-2 Carrying Out DMC Editing Setting the edit points and player speed Use the following procedure. 2,6,7 Press the ASSEMBLE button or the desired INSERT button to select the editing mode. Press the DMC EDIT button. This unit switches to the DMC editing mode, and the DMC EDIT button lights.

  • Page 70: Special Automatic Editing Methods

    5-3 Special Automatic Editing Methods This section describes the following automatic editing methods: • Quick editing • Continuous editing • Standalone editing • Manual editing • Preread editing 5-3-1 Quick Editing After selecting the edit mode, you can save on editing time by setting the edit points and executing the edit at the same time.

  • Page 71: Standalone Editing

    5-3-3 Standalone Editing This refers to editing using as the player an external device which cannot be controlled remotely through the REMOTE1-IN(9P) connector. For example, you can record a color bar signal from a signal generator in the joints between the scenes of an already completed tape.
  • Page 72 5-3 Special Automatic Editing Methods Notes • In preread editing, if an input video signal is used as the reference signal for the output video signal, this forms a feedback loop. To prevent the occurrence of feedback, set the F2 (OUTREF)(see page 9-7) in function menu page 4 to REF, and set item 309 in the extended setup menu to AUTO1 (see page 10-15) so as to use an external reference signal.

  • Page 73: Overview

    6-1 Overview This unit can record shot marks or use shot marks recorded on HDCAM tape. Shot marks are indications at desired points on a tape which enable faster cuing. Types of shot mark This unit supports the following three types of shot mark.
  • Page 74 6-1 Overview Reading shot marks This unit reads in shot marks written on a tape and stores them in memory (to a maximum of 200). Once this data is stored in this unit, it is preserved even when the power is turned off. Writing and erasing shot marks For recording start marks, a menu setting determines whether or not they are written each time recording...

  • Page 75: Shot Mark Operation Menu

    6-2 Shot Mark Operation Menu This section describes the settings in the shot mark operation menu. Displaying the shot mark operation menu With the function menu HOME page showing in the menu display, hold down the MARK button, and press the F5 (MENU) button.

  • Page 76: Shot Mark Operations

    6-3 Shot Mark Operations This section describes the operations concerning reading and writing shot marks. Note that the following operations cannot be carried out by remote control. 6-3-1 Reading Shot Marks To read in shot marks With a cassette loaded, hold down the LIST button and press the F FWD or REW button.

  • Page 77: Shot Mark List Operations

    To write in crash recording or assemble editing Hold the MARK button down for at least 2 seconds. At the position you wish to write the mark, hold down the ENTRY button, and press the MARK button. A mark of the type selected in item G04 of the shot mark operation menu is written.
  • Page 78 6-3 Shot Mark Operations Example of list display The following figure shows how the list is organized. Shot mark number of current cursor position / total number of stored shot marks Separator SHOT MARKER between read-in (011/180) groups of shot TIME CODE marks ----------------------------...

  • Page 79: Cuing Up To Shot Marks

    To delete an individual shot mark Use the following procedure. With the shot mark list displayed, select the shot mark to be deleted using the MULTI CONTROL knob. Hold the MARK button down. While you hold down the button, an “X” appears after the selected shot mark number, indicating that it will be deleted.

  • Page 80: Reading In Shot Data

    6-3 Shot Mark Operations Cuing up to shot marks adjacent to the current tape position (index function) In item G01 of the shot mark operation menu (page 6-3), select one of recording start mark, shot mark 1, shot mark 2, and post mark, or select all. Holding down the MARK button, press the F FWD button or REW button.

  • Page 81: Sorting Shot Marks

    6-3-6 Sorting Shot Marks Based on shot data recorded on the tape, you can separate the shot marks by cassette, and sort them in time code sequence. To sort the shot marks Use the following procedure. Before sorting *012345-DNW_-0123-4567- Cassette 1 ---------------------------- Cassette 2 (first time) ----------------------------...

  • Page 83: Overview Of Tele-File Functions

    7-1 Overview of Tele-File Functions Tele-File is a non-contact data carrier system. Tele-File enables data writing/reading between cassettes with memory labels and VTRs. It increases the efficiency of operations such as recording, playback and editing, and source data management. Memory label Newly developed IC The Tele-File system employs a newly developed memory IC with the following features.

  • Page 84: Opening The Tele-File Menu

    7-2 Opening the Tele-File Menu Opening from the function menu Display page 5 of the function menu in the menu display section, and then press the F1 (TELE-F) button. The Tele-File menu opens. For details about the function menu, see Chapter 9 “Function Menu”...

  • Page 85: Tele-File Menu

    7-3 Tele-File Menu 7-3-1 Clip Data Display How to read the display Shown below are examples of the default menu displays in the menu display section and the monitor display. Menu display section Monitor display Final data recording date Data type Clip No.
  • Page 86 Tele-File Menu Setting display area Displays the setting of the currently selected data type, and a cursor (“*” or “>”). The meaning of the cursor symbols is as follows: *: Indicates that the mode is clip data display mode or attribute data display/modify mode, and that data is selected.
  • Page 87 Monitor display Title The title (maximum 14 characters) set in attribute data display/modify mode. Selected clip number A 4-digit number representing the number of the selected clip (with the “*” cursor). Remaining memory percentage The percentage of remaining memory (user area) available for use.

  • Page 88: Preroll And Cue Up Using Clip Data

    7-3 Tele-File Menu Moving the cursor directly Regardless of the cursor’s current position, pressing one of the following buttons moves the cursor directly to the specified position in the same clip and displays the data. IN (video IN point) button: IN point data OUT (video OUT point) button: OUT point data MARK button: Cue point data To display the duration...

  • Page 89: Modifying Clip Data

    7-3-3 Modifying Clip Data To modify clip data, put the unit into clip data display mode and then press the F2 (SELECT) button to put it into clip data modification mode (the cursor changes to “>”). Item name Setting F1 (RETURN) Returns to clip data display mode.
  • Page 90 7-3 Tele-File Menu To add and delete clips To add clips Rotate the MULTI CONTROL knob to move the “*” cursor to the position where you want to insert the clip. Press the F2 (SELECT) button. The unit enters clip data modification mode. Press the F5 (INS LN) button.
  • Page 91 To set the set or modified data as other time data Press the F6 (SET TO) button and select the time data (cue point, IN point, or OUT point), and then press the F5 (SET) or F6 (SET NL) button. The position where the data is set differs as follows, depending on the button pressed.

  • Page 92: Undo/Resume Functions

    7-3 Tele-File Menu To make comment settings Proceed as follows to make comment settings. Select a clip. Select comment. Press the F2 (SELECT) button. The unit enters clip data modification mode. Press the F2 (MODIFY) button. The data entry area begins to flash, and the data can be set.

  • Page 93: Displaying And Modifying Attribute Data

    7-3-5 Displaying and Modifying Attribute Data You can display and modify attribute data. The example below shows attribute data displayed on the monitor. Video final recording date Administrator data Number of cue points Memory size Amount of memory used Video final recording date The most recent date (year/month/day) on which video was recorded on the tape.
  • Page 94 7-3 Tele-File Menu To modify attribute data You can modify the title, ID, administrator data, and write inhibit setting attributes. However, the attributes cannot be modified when the control mode is “remote.” The modification is not possible when the write inhibit setting is ON, either. Proceed as follows after setting the write inhibit setting to OFF.

  • Page 95: Overview Of Umid Functions

    8-1 Overview of UMID Functions The UMID (Unique Material Identifier) is a type of meta-data in video and audio materials. It has been internationally standardized in SMPTE Standard 330M. This unit supports recording and generation of UMIDs. The UMID is made up of a section called the “Basic” section and a section called the “Source Pack”...

  • Page 96: Recording Umids

    8-2 Recording UMIDs UMIDs can be recorded when recording video signals with this unit. You can select whether to inherit (copy) the UMID contained in input signals, or automatically or forcibly generate a new UMID. Selecting the type of UMID to record Select whether to record a Basic UMID or an Extended UMID by using setup menu item 655 UMID RECORDING.
  • Page 97 Press the F2 (USER) button. The content of the setting is a character string (in this example “ABCD”). Select any character to change in the string by pressing the F3 (PREV) and F4 (NEXT) buttons. The selected character flashes. Rotate the MULTI CONTROL knob to display the desired character in the position of the flashing character.

  • Page 98: Umid Output And Display

    8-3 UMID Output and Display This section explains how to output and display UMIDs. Note When the number of active scan lines for HD SDI output is set to 720P, output and displaying of UMID are not carried out. 8-3-1 UMID Output Settings You can choose to output UMIDs or not, and select either Basic UMID or Extended UMID when you choose to output UMIDs.
  • Page 99 4 Date/Time Date/Time data is displayed across two lines. The upper line shows the MJD (Modified Julian Date) contained in the Source Pack, converted to UTC. The lower line shows the data in unit count format (hours : minutes : seconds : frame) converted to UTC. Note The function for converting unit count to UTC works only when the unit rate is 2 (24 frames), 3 (24/1.001...

  • Page 101: Overview

    9-1 Overview The function menu allows you to make frequently made settings, such as selection of input video signals and time code settings. 9-1-1 Function Menu Configuration The function menu consists of seven pages by factory default: the HOME page and six pages numbered 1 to 6.

  • Page 102: Using The Function Menu

    9-1 Overview HOME2 page (user-defined function keys) Up to six function keys can be defined (i.e. six functions can be assigned to the F1 to F6 buttons in the HOME2 page). You can select and define the following function keys: •...

  • Page 103: Function Menu Item List

    9-2 Function Menu Item List The function menu has the following items. HOME page Item Setting F1 (VID.IN) Selects the input video signal. SDI: HDSDI signal SDTI: SDTI signal (only when option is installed) SG (normally not displayed): Test signal from the internal test signal generator (For details, see setup menu item 710 on page 10-24.) F2 (PB/EE) Selects the video and audio signals output during fast forward, rewind, stop, and standby.
  • Page 104 9-2 Function Menu Item List Page 1 Item Setting F1 (TCG) Selects the signal source to which the internal time code generator synchronizes. INT: Synchronize according to the initial preset value set by control panel operation or by remote control from the device connected to the REMOTE1-IN (9P) connector, or synchronize to the time code of the playback tape.
  • Page 105 Page 2 Item Setting F1 (V.PROC) Selects the control method for the internal digital video processor. LOCAL: Change the settings of the internal digital video processor by using this function menu. REMOTE: Use the optional BVR-50/50P Video Remote Control Unit to control the internal digital video processor.
  • Page 106 9-2 Function Menu Item List Page 3 Setting Item F1 (SYNC) Sets the HD output signal sync phase. Setting method With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal sync phase across the range ±15 µs relative to this unit’s input reference signal. Adjust this item when you want to adjust the output signal sync phase precisely to match a reference signal, or when connecting this unit and other VTRs to a device such as a switcher to perform operations such as special effects editing.
  • Page 107 Page 4 Item Setting F1 (CAPSTN) Selects the number of fields for capstan lock in playback and editing. In 59.94i, 29.97PsF mode 2F: The capstan servo locks in units of 2 fields. • For tape output, color framing may not match the reference signal selected with the F2 (OUTREF). •...
  • Page 108 9-2 Function Menu Item List Page 5 Item Setting F1 (TELE-F) Displays the Tele-File menu. For details of the Tele-File menu, see Section 7-3 “Tele-File Menu” (page 7-3). F2 (UMID) Displays UMID information during recording/playback. For details of UMID, see Chapter 8. Chapter 9 Function Menu...

  • Page 109: Setup Menu Configuration

    10-1 Setup Menu Configuration This unit has the following setup menus. • Basic setup menu • Extended setup menu To access the extended setup menu, a setting on the internal SS-89 board is required. For details, refer to the Installation Manual. In this manual, both the basic setup menu items and extended setup menu items are also referred to simply as setup menu items or menu items.

  • Page 110: Setup Menu Operations

    10-2 Setup Menu Operations To display setup menus ASSEMBLE VIDEO 59.94 CHANNEL VID. IN PB/EE CONFI TCGSET CTL/TC MENU CONDITION DISABL HOME HOME button F5 (MENU) button Function menu HOME page With the function menu HOME page showing in the menu display, press the F5 (MENU) button.
  • Page 111 To display a desired sub-item For a menu item having sub-items, you can select a desired sub-item as follows. With a desired menu item selected, press the F2 (SELECT) button. The currently selected sub-item name flashes. Turn the MULTI CONTROL knob to select a desired sub-item.
  • Page 112 10-2 Setup Menu Operations Resetting the menu settings to their factory default values (menu item B20) To reset the current active menu settings to their factory default values, proceed as follows. Perform steps 1 to 3 of the procedure described in the section “To change the settings of menu items with sub-items”...
  • Page 113 Line conversion mode Use the following procedure. When setup menu item 018 ACTIVE LINE SELECT is set to 1035 Select the conversion mode in setup menu item 916 ACTIVE LINE 1035 CONVERT MODE. 1080 k 1035 (CONV): Convert the active scan lines from 1080 to 1035, without changing the aspect ratio.
  • Page 114 10-2 Setup Menu Operations To recall settings from a menu bank When recalling the settings saved in one of menu banks 1 to 3, set the corresponding one of menu items B01 RECALL BANK 1 to B03 RECALL BANK 3 to ON, then press F5 (SET) button.

  • Page 115: Items In The Basic Setup Menu

    10-3 Items in the Basic Setup Menu The basic setup menu contains the following items. Item number Item name PREROLL TIME CHARACTER H- POSITION a), b) CHARACTER V- POSITION SYNCHRONIZE DISPLAY INFORMATION SELECT LOCAL FUNCTION ENABLE TAPE TIMER DISPLAY MONITORING SELECTION FOR VTR- TO-VTR EDIT a)When setting items 002 and 003, watch the monitor...
  • Page 116 10-3 Items in the Basic Setup Menu Item number Item name CHARACTER TYPE CHARACTER V-SIZE SYSTEM FREQUENCY SELECT ACTIVE LINE SELECT (Valid only in 59.94i or 29.97PsF mode) a)When setting items 009 and 011, watch the monitor screen, and adjust to the required state. 10-8 Chapter 10 Setup Menus Settings...
  • Page 117 Item number Item name LOCAL KEY MAP Sub-item STOP PLAY REC/EDIT STANDBY EJECT SHUTTLE FF/REW PREROLL AUTO/PRE/REVIEW Select whether the AUTO EDIT, PREVIEW, REVIEW buttons function. F-KEY AUDIO/MONITOR Select whether the audio monitor signal selection buttons function. EDIT PRESET OTHERS STORED OWNERSHIP RECALL BANK 1 RECALL BANK 2...

  • Page 118: Items In The Extended Setup Menu

    10-4 Items in the Extended Setup Menu 10-4 Items in the Extended Setup Menu The extended setup menu contains the following items. Menu items in the range 100 to 199, relating to the control panels Item number Item name SELECTION FOR SEARCH DIAL ENABLE MAXIMUM SPEED AUDIO MUTING TIME...
  • Page 119 Menu items in the range 100 to 199, relating to the control panels (Continued) Item number Item name FORCED EE WHEN TAPE UNTHREAD TSO PLAY JOG DIAL RESPONSE CONTROL PANEL SELECTION Speed TYPE 2 TYPE 3 (reverse) Rotation rate (forward) Settings During tape threading and unthreading, and when no cassette is inserted, select whether the setting of the function menu item PB/EE controls the PB/EE setting...
  • Page 120 10-4 Items in the Extended Setup Menu Menu items in the range 100 to 199, relating to the control panels (Continued) Item number Item name KEY INHIBIT SWITCH EFFECTIVE AREA Sub-item REMOTE SELECT AUDIO/F-KEY MODE CONTROL Select which switch and button operations can be carried out from the lower VARIABLE SPEED LIMIT IN KEY PANEL CONTROL CTL LOCK IN VAR/SHTL...
  • Page 121 Menu items in the range 100 to 199, relating to the control panels (Continued) Item number Item name TELE-FILE THREAD COUNTER CLEAR MODE TELE-FILE IN OUT INPUT CONTINUE LOST LOCK DISPLAY ON CONTROL PANEL Menu items in the range 200 to 299, relating to the remote control interface Item number Item name PARA RUN CF FLAG (Valid only in...
  • Page 122 10-4 Items in the Extended Setup Menu Menu items in the range 300 to 399, relating to editing operations Item number Item name VAR SPEED RANGE FOR SYNCHRONIZATION CAPSTAN RE-LOCKING DIRECTION (Invalid in 24PsF or 23.98PsF mode) EDIT FIELD SELECT SYNC GRADE DMC INITIAL SPEED AUTO-DELETION FOR...
  • Page 123 Menu items in the range 300 to 399, relating to editing operations (Continued) Item number Item name SERVO/AV REFERENCE REC INHIBIT ANALOG AUDIO EDIT PRESET REPLACE FOR ANALOG AUDIO EDIT PRESET REPLACE FOR ANALOG AUDIO EDIT PRESET REPLACE FOR ANALOG AUDIO EDIT PRESET REPLACE FOR ANALOG AUDIO EDIT PRESET REPLACE FOR...
  • Page 124 10-4 Items in the Extended Setup Menu Menu items in the range 300 to 399, relating to editing operations (Continued) Item number Item name AUDIO EDIT MODE EDIT RETRY PREREAD SELECT DIGITAL AUDIO PB PROCESS ON EDIT POINT (Invalid in 24PsF or 23.98PsF mode) AUTOMATIC IN ENTRY AFTER AUTO EDIT...
  • Page 125 Menu items in the range 300 to 399, relating to editing operations (Continued) Item number Item name EE REFERENCE CONTROL EDIT PRESET INHIBIT IN KEY PANEL CONTROL EXTERNAL REFERENCE SELECT OUTPUT AUDIO/TC PHASE Menu items in the range 400 to 499, relating to preroll Item number Item name FUNCTION MODE AFTER CUEUP...
  • Page 126 10-4 Items in the Extended Setup Menu Menu items in the range 500 to 599, relating to tape protection Item number Item name STILL TIMER TAPE PROTECTION MODE FROM SEARCH TAPE PROTECTION MODE FROM STOP DRUM ROTATION IN STANDBY OFF STILL TENSION Menu items in the range 600 to 650, relating to the time code generator Item number Item name...
  • Page 127 Menu items in the range 600 to 650, relating to the time code generator (Continued) Item number Item name VITC POSITION SEL-2 (Invalid in 24PsF or 23.98PsF mode) ID CODE PRESET ID CODE SW TCG REGEN MODE TC OUTPUT SIGNAL IN REGEN MODE U-BIT BINARY GROUP FLAG...
  • Page 128 10-4 Items in the Extended Setup Menu Menu items in the range 600 to 650, relating to the time code generator (Continued) Item number Item name PHASE CORRECTION TCG CF FLAG REGEN CONTROL MODE LTC OUTPUT PHASE UPCONV EMBEDDED VITC (Invalid in 24PsF or 23.98PsF mode) 10-20...
  • Page 129 Menu items in the range 600 to 650, relating to the time code generator (Continued) Item number Item name TC CONVERT 24F -> 25F (In 50i or 25PsF mode only. Not displayed when operating in 720P-line mode.) TC CONVERT 25F -> 24F (In 24PsF or 23.98PsF mode only.
  • Page 130 10-4 Items in the Extended Setup Menu Menu items in the range 651 to 699, relating to the UMID Item number Item name UMID OUTPUT UMID HD VANC LINE UMID GENERATE METHOD UMID RECORDING MATERIAL NO. 10-22 Chapter 10 Setup Menus Settings Select UMID output and the UMID type.
  • Page 131 Menu items in the range 700 to 799, relating to video control Item number Item name BLANK LINE SELECT (Invalid in 24PsF or 23.98PsF mode) Sub-Item ALL LINE In 59.94i, 12 ... LINE 12 ... LINE 29.97PsF mode LINE 20 In 50i, 25PsF 9 ...
  • Page 132 10-4 Items in the Extended Setup Menu Menu items in the range 700 to 799, relating to video control (Continued) Item number Item name INTERNAL VIDEO SIGNAL GENERATOR VIDEO PROCESS ON CAP LOCK 2FIELD (Invalid in 24PsF or 23.98PsF mode) VIDEO SETUP REFERENCE LEVEL (Valid only in 59.94i or...
  • Page 133 Menu items in the range 700 to 799, relating to video control (Continued) (Items 715 to 720: Settings for controlling the SD video processing system according to the menu settings.) Item number Item name VIDEO GAIN CONTROL CHROMA GAIN CONTROL CHROMA PHASE CONTROL SETUP LEVEL (59.94i,...
  • Page 134 10-4 Items in the Extended Setup Menu Menu items in the range 700 to 799, relating to video control (Continued) Item number Item name H BLANKING WIDTH (Invalid in 24PsF or 23.98PsF mode) VIDEO EDIT PREVIEW SWITCHER OUTPUT SCH PHASE (Invalid in 24PsF or 23.98PsF mode) COMPOSITE MODE...
  • Page 135 Menu items in the range 800 to 899, relating to audio control Item number Item name DIGITAL JOG SOUND DIGITAL AUDIO MUTING IN SHUTTLE MODE DIGITAL AUDIO FADE TIME AUDIO MONITOR OUTPUT MIXING LEVEL METER SCALE a) Cross-fade time is 24 ms. b) Actual value is 49 ms.
  • Page 136 10-4 Items in the Extended Setup Menu Menu items in the range 800 to 899, relating to audio control (Continued) Item number Item name AUDIO OUTPUT PHASE INTERNAL AUDIO SIGNAL GENERATOR AUDIO LEVEL METER DIMMER CONTROL AUDIO EDIT PREVIEW SWITCHER NON-AUDIO FLAG PB (Invalid in 24PsF or 23.98PsF mode)
  • Page 137 Menu items in the range 900 to 999, relating to digital processing Item number Item name VIDEO OUTPUT DATA (Invalid in 24PsF or 23.98PsF mode) FREEZE MODE FREEZE CONTROL FROM KEY PANEL AUTO FREEZE CONTROL STOP FREEZE CONTROL ACTIVE LINE 1035 CONVERT MODE (Valid only in 59.94i or 29.97PsF mode)
  • Page 138 10-4 Items in the Extended Setup Menu Menu items in the range 900 to 999, relating to digital processing (Continued) Item number Item name ACTIVE LINE 1080 CONVERT MODE (Valid only in 59.94i or 29.97PsF mode) SLOW PROCESS MODE SD-SDI H-ANC CONTROL (Invalid in 24PsF or 23.98PsF mode)
  • Page 139 Menu items in the range 900 to 999, relating to digital processing (Continued) Item number Item name H/V RATIO (DC) (Invalid in 24PsF or 23.98PsF mode) GAMMA LEVEL (DC) (Invalid in 24PsF or 23.98PsF mode) V FILTER SELECT (Invalid in 24PsF or 23.98PsF mode) CROSS COLOR CRISP (Invalid in 24PsF or...
  • Page 140 10-4 Items in the Extended Setup Menu Menu items in the range 900 to 999, relating to digital processing (Continued) Item number Item name GAMMA LEVEL (UC) (Invalid in 24PsF or 23.98PsF mode) BACKGROUND COLOR (UC) (Invalid in 24PsF or 23.98PsF mode) 10-32 Chapter 10 Setup Menus...

  • Page 141: Removing A Cassette When Tape Slack Occurs

    11-2 Head Cleaning To clean the video heads and audio heads, always use the special-purpose Sony BCT-HD12CL cleaning cassette. If you insert the cleaning cassette, it is automatically ejected after a head cleaning operation which lasts for 10 seconds.

  • Page 142: Error Messages

    This unit is equipped with a self-diagnosis function, and if a problem is detected, displays an error message in the time data display and on the monitor. If an error message appears, contact your Sony service representative. Indications in the time data display...
  • Page 143 Error Message List Code Message – NO COMMUNICATION REEL TROUBLE REEL TROUBLE REEL TROUBLE REEL TROUBLE REEL TROUBLE TAPE TENSION CAPSTAN TROUBLE DRUM TROUBLE TH/UNTH MOTOR THREADING HUMID TAPE T/E SENSOR TAPE TOP SENSOR TAPE END SENSOR FAN MOTOR CASS COMP MOTOR REEL SFT MOTOR REEL POS SENSOR THRED RING SENS...

  • Page 144: Moisture Condensation

    11-4 Moisture Condensation When the unit is suddenly moved from a cold to a warm location, or used in a very humid place, moisture from the air can condense on the head-drum. This is called moisture condensation. If the tape is run in this state, it can adhere to the drum.

  • Page 145: Regular Checks

    11-5 Regular Checks 11-5-1 Digital Hours Meter The digital hours meter can display seven items of information, in corresponding display modes, about the operational history of the unit. Use it as a guide in scheduling periodic maintenance. Display modes of the hours meter H01: OPERATION mode Displays the total number of hours the unit has been powered on in units of 1 hour.

  • Page 146: Maintenance Timings

    Fan motor (card) Operation time (H01) Fan motor (MD) Fan motor (power supply) Note Contact a Sony service or marketing representative regarding the replacement and checking of components. 11-6 Chapter 11 Maintenance and Inspection Note that an arrow in the table means that the component to be replaced is part of the assembly the arrow points to, which must be replaced as a whole.

  • Page 147: Specifications

    Specifications General Recording format HDCAM Power requirements 100 to 240 VAC, 50/60 Hz Power consumption 2.2 A (220 W), when used without optional devices Peak inrush current (1) Power ON, current probe method: 50 A (240 V), 14 A (100 V) (2) Hot switching inrush current, measured in accordance with European standard EN55103-1: 25 A (230 V)
  • Page 148 Specifications Fast forward/ rewind time Approx. 3 minutes with BCT- 124HDL Search speed Shuttle mode HDCAM playback: Still to approx. ±50 times normal playback speed (59.94i, 29.97PsF) Still to approx. ±58 times normal playback speed (50i, 25PsF) Still to approx. ±60 times normal playback speed (24PsF, 23.98PsF) Analog Betacam playback:...
  • Page 149 Betacam SX playback Video Bandwidth R–Y/B–Y S/N ratio K factor (2T pulse) Digital Audio (CH1 to CH4) Frequency response Dynamic range Distortion Analog Betacam playback Video Bandwidth R–Y/ B–Y S/N ratio R–Y/ B–Y K factor (2T pulse) LF non-linearity R–Y/ B–Y Y/C delay Audio Frequency response (at 10 dB...
  • Page 150 Specifications Processor adjustment range Video level ±3 dB/ –∞ to +3 dB selectable Chroma level ±3 dB/ –∞ to +3 dB selectable Setup level (59.94i, 29.97PsF mode) ±30 IRE Black level (50i, 25PsF mode) ±210 mV Chroma phase ±30° System phase Sync: ±15 µs SC: ±200 ns Input connectors...
  • Page 151 REMOTE 1-OUT(9P) D-sub 9-pin, female RS-232C D-sub 9-pin, male VIDEO CONTROL(15P) D-sub 15-pin, male (for optional BVR-50/50P) VIDEO CONTROL(9P) D-sub 9-pin, female (for optional HKDV-900) REMOTE 2 PARALLEL I/O(50P) 50-pin, female Memory stick slot Memory stick (8 to 128MB) Accessories supplied PSW 4 ×...
  • Page 152 Specifications Relation between HKDV-900/503 setting items and setup menu of this unit HKDV-900/503 setting items Setup menu items of this unit HD Master 740: MASTER LEVEL (HD) HD Y 741: Y LEVEL (HD) HD Pb 742: Pb LEVEL (HD) HD Pr 743: Pr LEVEL (HD) HD Setup 745: SETUP LEVEL (HD)
  • Page 153 HD/SD video output phase settings For the HD/SD video output phase setting, you can use the maintenance menu. Item number Item name M3A: M3A0: OUTPUT HD PHASE PHASE SELECT M3A1: SD PHASE M3A2: SD UPCNV Note The SDSDI (D1) output and component/composite outputs have the same phase.
  • Page 154 Specifications Playback tape format conversion outputs Playback tape format HDCAM 23.98PsF 24PsF 25PsF 29.97PsF 59.94i 30PsF Betacam SX 50i (PAL) 59.94i (NTSC) Betacam/SP 50i (PAL) 59.94i (NTSC) a) For 1080/25PsF or 50i, output is downconverted to 576/ 50i. b) For 1080/29.97PsF or 59.94i, output is downconverted to 480/59.94i.

  • Page 155: Index

    Index AC IN connector 2-18 ALARM indicator 2-13 Analog audio input/output section 2-16 video input/output section 2-17 ASSEMBLE button 2-12 Audio control section 2-5 monitor signal output section 2-19 monitor signal selection buttons 2-6 selection function selector buttons 2-5 setting display section 2-5 AUDIO IN/OUT buttons 2-14 AUDIO INPUT (AES/EBU) connectors 2-17...
  • Page 156 Index Non-drop frame mark 3-8 mode 9-4 Operation mode 3-8 OUTREF (function menu) 9-7 PANEL SELECT switch 2-15 Parts replacement 11-6 PB controls 2-7 PB/EE (function menu) 9-3 PHONES jack/control 2-3 PLAY button 2-12 Playback capstan override 4-9 dynamic motion control (DMC) 4-11 jog mode 4-8 normal 4-7 shuttle mode 4-8...
  • Page 157 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
  • Page 158 Sony Corporation HDW-S2000/S2000P Printed in Japan (SYL) 2005.05.13  2004 3-854-863-02(1) Printed on 100% recycled paper.

This manual is also suitable for:

Hdw-s2000p

Table of Contents