Disposal; Information On Weee Directive 2002/96/Ec (Waste Electrical And Electronic Equipment); Transport Safety Information; Storage Conditions - ABB EBS852 Operating Instruction
Power electronic unit for cabinet installation
Hide thumbs
Also See for EBS852:
- Operating instructions manual (44 pages) ,
- Instructions manual (28 pages) ,
- Operating instruction (44 pages)
Table of Contents
Advertisement
Safety
Pos: 4.21 /Sicherheit/Allgemein/Organisatorische Maßnahmen/Entsorgung @ 10\mod_1176447410937_3101.doc @ 81544
1.9
Disposal
ABB Automation Products GmbH actively promotes environmental consciousness and has an
operational
EN ISO 14001:2004 and OHSAS 18001. Our products and solutions should have minimum
impact on the environment and persons during manufacture, storage, transport, use and
disposal.
This includes the environmentally friendly use of natural resources. Through its publications
ABB conducts an open dialog with the public.
This product/solution is manufactured from materials that can be reused by specialized
recycling companies.
1.9.1
Information on WEEE directive 2002/96/EC (Waste Electrical and Electronic Equipment)
This product/solution is not subject to the WEEE directive 2002/96/EC and relevant national
laws (e.g., ElektroG in Germany).
Dispose of the product/solution directly in a specialized recycling facility and do not use the
municipal garbage. Only privately used products may be disposed of in the municipal garbage
according to the WEEE directive 2002/96/EC. Proper disposal prevents negative effects on
people and the environment, and supports the reuse of valuable raw materials.
If it is not possible to dispose of old equipment properly, ABB Service can accept and dispose of
returns for a fee.
Pos: 4.22 /Überschriften/1.1/1-spaltig/S - U/Sicherheitshinweise zum Transport @ 0\mod_1140166475703_3101.doc @ 3206
1.10 Transport safety information
Pos: 4.23 /Transport/Allgemein/Prüfung @ 0\mod_1129815371197_3101.doc @ 3317
Check the devices for possible damage that may have occurred during transport. Damages in
transit must be recorded on the transport documents. All claims for damages must be claimed
without delay against the shipper and before the installation.
Pos: 4.24 /Überschriften/1.1/1-spaltig/J - L/Lagerbedingungen @ 8\mod_1176907016921_3101.doc @ 84229
1.11 Storage conditions
Pos: 4.25 /Sicherheit/Aktorik/Leistungselektroniken/EBS852, EBS862/Lagerbedingungen @ 20\mod_1211955133656_3101.doc @ 196383
The power electronic units EBS852, EBS862 (Contrac) have an enclosure rating of IP 20. They
must be stored as appropriate for this protection class. Condensation is not permitted.
Moisture content must not exceed an annual average of 75 %.
The permissible storage and transport temperatures must be observed.
If you intend to store or transport the device for a prolonged period, we recommend that you
wrap it in plastic film and add desiccant. Check that the desiccant is still active on a regular
basis.
Pos: 4.26 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
10
management
system
EBS852, EBS862 (Contrac)
in
accordance
with
DIN
EN
ISO
9001:2000,
42/68-831-EN
Advertisement
Table of Contents
