Specifying Paper Size And Type In The Paper Drawer - Canon imageRUNNER ADVANCE C5560i III User Manual
Hide thumbs
Also See for imageRUNNER ADVANCE C5560i III:
Table of Contents
Advertisement
Specifying Paper Size and Type in the Paper Drawer
1
Load the paper in the paper drawer.
2
Press
.
3
Press <Preferences>
4
Check the paper size that is displayed.
●
When loading standard size paper, the paper size is automatically detected.
●
The paper sources are represented by the following icons, respectively. Note that the paper source
indications differ depending on the options installed.
: The paper drawer 1
: The paper drawer 2
: The paper drawer 3
: The paper drawer 4
●
If the displayed paper size is different from the loaded paper size, the paper may not be loaded properly.
Load the paper again.
●
Even when paper is loaded correctly, some small standard sizes may not be detected correctly. In this case,
press <Unrecognized Standard Size> and select the paper size.
Sizes(P. 1498)
●
If <Custom> is displayed even though the standard size paper is loaded, press <Custom Size>
Settings>. The correct size will be displayed.
When loading custom size paper
0UUY-023 0UW1-023 0YRY-02C 0X7F-02A 0X7H-02A 1100-02C 0X6E-02A 0X6W-02A 10XJ-02C 0X7C-02A 0X7A-02A 1106-02C 0WXY-02A 0X7E-02A 10YY-02C 10H3-02C 0WR6-02A 0WR7-02A 108A-02C 1116-02C 10H4-02C 0WR5-02A 0WR8-02A 0YWJ-029 0YWH-02A 0YWR-029 0YWK-02A 0YWE-02A 0YWF-02A 0YAS-02E
Specify the size of paper loaded in the paper drawer.
1
Select the paper drawer in which paper is loaded and press <Custom Size>.
2
Specify the length of the <X> side and <Y> side.
Basic Operations
Basic Paper Loading Method(P. 117)
<Paper Settings>
<Paper Settings>.
167
Automatically Detectable Paper
4XR3-02J
<Cancel
Advertisement
Chapters
Table of Contents
