Page 1 Satellite 2400/2405 Series User’s Guide If you need assistance: ® InTouch Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see guide. TOSHIBA ® Chapter 9 on page 222 in this...
Page 2 If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE.
Page 3: Fcc Notice
: Only peripherals complying with the FCC Class B limits may be attached to this computer. Operation with non-compliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's serial port, parallel port, monitor port, USB port, PS/2 microphone jack.
Page 4: Type Of Service
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: If Problems Arise
FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba.
Page 6: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The Toshiba Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 7: Wireless Lan And Your Health
Regulatory Information The Toshiba Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 8: Interference Statement
The radiated output power of the Toshiba Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the Toshiba Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The distance the user needs to be from the antennas, located on top of the LCD, should not be less than 20.0 cm when the display is raised to its normal...
Page 9 ❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 10 To prevent direct exposure to the laser beam, do not try to open the enclosure. Location of the required label (Sample shown below. (Location of the label and manufacturing information may vary.) Card from Toshiba is far...
Page 11 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 12 TouchPad is a trademark of Synaptics, Inc. CompuServe is a registered trademark of America Online, Inc. Bluetooth is a trademark owned by its proprietor and used by Toshiba under license. All other brand and product names are trademarks or registered trademarks of their respective companies.
Page 13: Table Of Contents
Contents Introduction ...23 This guide ... 23 Safety icons ... 24 Other icons used... 25 Other documentation ... 25 Service options ... 26 Chapter 1: Finding Your Way Around ... 27 Making sure you have everything ... 27 Front with the display closed ... 27 Back ...
Page 14 Keeping yourself comfortable ... 40 Precautions... 43 Setting up your computer ... 44 Setting up your software... 45 Registering your computer with Toshiba ... 46 Adding external devices ... 46 Installing additional memory (optional) ... 47 Connecting a mouse ... 53 Connecting a printer ...
Page 15 Ctrl, Fn, and Alt keys ... 78 Function keys... 78 Windows Overlay keys... 79 Emulating a full-size keyboard ... 81 TOSHIBA Console button ... 81 Starting a program... 82 Saving your work ... 82 Printing your work ... 83 Using diskettes ... 84 Inserting and removing diskettes...
Page 16 Going into Standby mode more quickly ... 113 Starting again from Standby ... 116 Chapter 4: Mobile Computing ... 117 Toshiba’s energy-saver design ... 117 Running the computer on battery power ... 117 Using additional batteries ... 118 Battery safety precautions... 118 Maximizing battery life...
Page 17 Conserving battery power ... 123 What to do when the battery runs low ... 124 Setting battery alarms... 125 Changing the main battery ... 126 Removing the battery from the computer ... 126 Removing the battery from the battery cover. 127 Inserting a charged battery ...
Page 18 The World Wide Web ... 173 Internet Service Providers... 173 Connecting to the Internet Surfing the Internet... 174 Internet features... 174 Uploading and downloading files Toshiba’s online resources... 175 Exploring video features ... 175 Viewing presentations or ® XP Help and Support... 157 ®...
Page 19 Hot swapping... 183 Using SD cards ... 184 Inserting a SD card ... 184 Removing a SD card ... 185 Chapter 7: Toshiba Utilities ... 186 TOSHIBA Accessibility ... 186 Fn-esse ... 187 Starting Fn-esse... 188 Assigning a key to a program or document ... 189 Viewing existing key assignments ...
Page 20 Contents Using the WinDVD toolbar ... 203 Using the WinDVD status bar ... 203 Using the WinDVD control panel... 204 Using the control panel playback buttons ... 205 Maximizing the video window ... 207 Using playlists ... 208 Creating playlists ... 208 Loading and playing playlists...
Page 21 Develop good computing habits ... 252 If you need further assistance... 254 Before you call ... 254 Contacting Toshiba ... 254 Other Toshiba Internet Web sites ... 256 Toshiba’s worldwide offices ... 256 Appendix A: Hot Keys... 259 Volume Mute... 259 Instant password security...
Page 22 Contents Appendix B: Power Cable Connectors... 266 USA and Canada ... 266 United Kingdom ... 266 Australia... 266 Europe ... 266 Appendix C: Video Modes... 267 Your computer’s video modes ... 268 Table 1 Video modes (VGA) ... 268 Table 2 Video modes (XGA) ... 269 Table 3 Video modes (Ultra XGA)...
Page 23: Introduction
Home operating system or the Microsoft Professional operating system. This guide contains information on both operating systems and how they function with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with the computer.
Page 24: Safety Icons
Introduction Safety icons If you are new to computers, or have not used a notebook computer before, read the first couple of chapters to familiarize yourself with the components of the computer and how to turn it on. After that, seek out whatever interests you most. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal...
Page 25: Other Icons Used
Guides for other programs that may come preinstalled on your computer and for additional programs on your Recovery CDs. ❖ Toshiba Accessories Information, which lists accessories available from Toshiba and explains how to order them. ❖ The Microsoft explains the features of the operating system. Other documentation ®...
Page 26: Service Options
Introduction Service options Service options Toshiba offers a full line of service options built around its ® SelectServ warranty programs. For more information, visit Toshiba’s Web site at If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page toshiba.com.
Page 27: Chapter 1: Finding Your Way Around
Chapter 1 Finding Your Way Around This chapter presents a “grand tour” of your notebook computer. It serves as a reference when you need to locate specific parts of the computer. Making sure you have everything Before doing anything else, consult the Quick Start card provided with your system to make sure you received everything.
Page 28: Back
Finding Your Way Around Back The infrared port allows cable-free communication with another device, such as a computer or printer, that has a compatible infrared port. The lights on the system indicator panel provide information about various system functions. For a description, see The volume control dial lets you adjust the loudness of the system speakers.
Page 29 The LAN port lets you connect the computer to a local area Ether network using a 10/100 Ethernet link. The USB (Universal Serial Bus) ports allow you to connect USB peripherals to your computer. DEFINITION: USB is a peripheral expansion standard that supports a data-transfer rate of up to 12 Mbps for peripherals such as keyboards, pointing devices, and monitors.
Page 30: Right Side
Finding Your Way Around Right side Right side Diskette drive eject button Diskette drive LED Diskette drive Wireless antenna LED* (*only functional for systems with Wi-Fi The diskette drive LED (light-emitting diode) glows when the diskette drive is in use. The diskette drive allows diskettes to be accessed.
Page 31: Left Side
The eject button opens the drive tray when the computer is turned on. The manual eject button enables you to open the drive tray when the computer is off. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it.
Page 32: Front With The Display Open
This section describes features that are revealed when you open the display panel. For features that are visible when the display panel is closed, see page CD/DVD control buttons Secondary control button Toshiba Scroller Primary control button “Front with the display closed” on Screen TOSHIBA Console...
Page 33 The primary control button, located below the TouchPad, acts like the primary button on a mouse. The Toshiba Scroller, located between the primary and secondary control buttons, allows you to scroll pages vertically on your display. The secondary control button, located below the TouchPad,...
Page 34: Keyboard Indicator Lights
The keyboard indicator lights provide information about various keyboard functions. For details, see indicator lights” on page The TOSHIBA Console button allows quick access to various functions. See The computer’s screen is a liquid crystal display (LCD) that provides clear, sharp images. For more information on your viewing options, see “Display modes”...
Page 35: System Indicator Panel
overlay key moves the cursor in the direction of the arrow printed on the front of the key instead of typing the letter printed on the top of the key. The numeric mode light glows green when the numeric overlay is on. When this light is on, pressing an overlay key types the number printed on the front of the key instead of typing the letter printed on the top of the key.
Page 36: Cd/Dvd Control Buttons
Finding Your Way Around Front with the display open The hard disk drive light flashes green while the hard disk drive is being accessed. The disk/disc activity light flashes green when the diskette drive, the DVD-ROM or the DVD-ROM/CD-RW drive is being accessed.
Page 37: Underside
The play/pause button starts the disc player, or makes the disc player pause if it is currently playing. The stop/eject button stops a disc that is currently playing. Press the button again to eject the disc. The next track button causes the disc player to skip to the following track on the disc.
Page 38 Finding Your Way Around Underside The Wi-Fi Mini-PCI cover secures a Wi-Fi Mini-PCI card for wireless networking (for systems with Wi-Fi). See “Accessing the wireless modules using your system tray” on page 171. The expansion memory slot cover protects the slots where you insert additional memory.
Page 39: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on, contact a Toshiba authorized service provider. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
Page 41 ❖ If you are using an external monitor, the top of the display should be no higher than eye level. ❖ If you use a paper holder, set it at about the same height and distance as the screen. Seating and posture When using your computer, maintain good posture with your body relaxed and your weight distributed evenly.
Page 42 Getting Started Selecting a place to work ❖ Adjust the back of your chair so that it supports the lower curve of your spine. If necessary, use a cushion to provide extra back support. Lower-back-support cushions are available at many office supply stores. ❖...
Page 43: Precautions
Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. ❖...
Page 44: Setting Up Your Computer
Getting Started Setting up your computer ❖ Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is being used. Overheating of a PC Card can result in errors or instability in its operation.
Page 45: Setting Up Your Software
Toshiba and Microsoft. Click Yes to register, or No to exit the process. NOTE: If you click No, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. Enter you personal information in the registration window.
Page 46: Registering Your Computer With Toshiba
Toshiba warranty worldwide at no charge to you. You can register your computer with Toshiba by double- clicking the icon on your desktop or by mailing the registration card that may ship with your computer.
Page 47: Installing Additional Memory (Optional)
❖ Connect an external monitor (see devices” on page ❖ Connect a local printer (see page ❖ Install PC Cards (see ❖ Install an SD card (see Installing additional memory (optional) CAUTION: Before you install or remove a memory module, turn off the computer using the Start menu.
Page 48 Getting Started Installing additional memory (optional) CAUTION: Do not try to install a memory module under the following conditions. You can damage the computer and the module. 1. The computer is turned on. 2. The computer was shut down using Standby mode. 3.
Page 49 Installing additional memory (optional) Underside of the computer NOTE: Use a point size 0 Phillips screwdriver. Locate the expansion memory slot cover and remove the screw that secures the cover. Removing the expansion memory slot cover screw Getting Started Expansion memory slot cover...
Page 50 Getting Started Installing additional memory (optional) Using your finger or a narrow object, lift off the cover. Put the screw and the cover in a safe place so that you can retrieve them later. CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 51 Installing additional memory (optional) Inserting the memory module CAUTION: Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. Replace the memory slot cover. Replace the screw and tighten it. Turn the computer over and reconnect any cables you removed.
Page 52: Removing A Memory Module
Getting Started Installing additional memory (optional) Removing a memory module CAUTION: If you use the computer for a long time, the memory modules will become hot. If this happens, let the modules cool to room temperature before you replace them. Follow steps 1 through 6 in memory (optional)”...
Page 53: Connecting A Mouse
Complete the procedure by following steps 10 through 12 “Installing additional memory (optional)” on page Checking total memory When you add or remove memory, you can check that the computer has recognized the change. To do this: Click Start, Control Panel Click Performance and Maintenance.
Page 54: Connecting A Usb Printer
Getting Started Using external display devices Connecting a USB printer To achieve the connection, you need a suitable USB cable, which may come with your printer. Otherwise, you can purchase one from a computer or electronics store. NOTE: Follow the manufacturer’s instructions for connecting a USB printer to your computer.
Page 55: Connecting An External Monitor
Connecting an external monitor You must attach the monitor before you turn on the computer. Connect the monitor’s video cable to the RGB (monitor) port. Connect the monitor’s power cable to a live electrical outlet. Turn on the external monitor. Turn on the computer.
Page 56: Enabling Different Refresh Rates
Getting Started Using external display devices Release the TECHNICAL NOTE: You can also change these settings using the Display Properties box in the Control Panel. Enabling different refresh rates To include the ability to use the built-in display panel and external video device simultaneously among your display output options, you must first enable different refresh rates: Right-click the desktop and click Properties.
Page 57: Adjusting The Quality Of The External Display
Sample Multiple Monitors window Click the Dual button in Controller Options. Click OK. Adjusting the quality of the external display To obtain the best picture quality from your external display device, you may need to adjust the video settings. See the documentation supplied with the device for additional configuration steps.
Page 58: Display Limitations
Getting Started Using external display devices Display limitations Keep in mind that the quality of the display will be limited to the capabilities of the external video device. ❖ If the external video device, such as an SVGA monitor, is capable of displaying at a maximum resolution of 640 x 480 and your system is set for a higher resolution, only part of the desktop will appear on the screen.
Page 59: Connecting An External Diskette Drive
Connecting an external diskette drive Although your computer has an internal diskette drive, you can attach an external diskette drive to use diskettes with your computer. These drives hold 3.5-inch diskettes. Sample external USB diskette drive To connect an external USB diskette drive, connect the drive’s cable to one of the computer’s USB ports.
Page 60: Connecting The Ac Adapter
Getting Started Connecting the AC adapter Connecting the AC adapter The AC adapter enables you to power the computer from an AC outlet and to charge the computer’s batteries. The AC power light on the computer glows when the device is plugged in.
Page 61 Doing so may cause an electric shock. CAUTION: Using the wrong AC adapter could damage your computer. Toshiba assumes no liability for any damage in such cases. Never pull directly on the power cable to unplug it. Hold the power plug when removing the cable from the outlet.
Page 62: Charging The Battery
Getting Started Charging the battery Charging the battery Before you can use the battery to power the computer, you must charge it. Connect the computer to a live power outlet using the AC adapter and power cable. The on/off light glows green and the battery light glows amber to show that it is charging.
Page 63: Turning On The Power
Opening the display panel CAUTION: To avoid damaging the display panel, don’t force it beyond the point where it moves easily. Never lift or move the computer using the display panel. Turning on the power Check that all the drives are empty. Turn on the computer by pressing the power button located above the keyboard.
Page 64 Getting Started Using the computer for the first time Pressing the power button NOTE: When you turn on the computer for the first time, don’t turn off the power again until the operating system has loaded completely. The AC power light glows when the computer is connected to an external power source.
Page 65: Activating The Power-On Password
If the password is incorrect, you will be prompted to try again. NOTE: If you forget your power-on password and therefore can’t turn on your computer, take your computer to a Toshiba authorized service center for help. After the third incorrect password submission, the system automatically shuts down.
Page 66: Primary And Secondary Control Buttons
Getting Started Using the computer for the first time move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor: ❖ To move the cursor to the top of the page, slide your finger forward on the TouchPad.
Page 67: Toshiba Scroller
“Lesson 2: Using the TouchPad and control buttons together” on page 135. Toshiba Scroller The Toshiba Scroller, located between the primary and secondary control buttons, allows you to scroll pages vertically with the Scroller: ❖ Roll the Scroller with a forward motion to scroll up ❖...
Page 68 Getting Started Using the computer for the first time Sample Mouse Properties window Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad.
Page 69: Setting Up A Printer
Setting up a printer NOTE: Follow the manufacturer’s instructions for connecting a printer to your computer. If your printer has not been detected automatically when connected to the computer, you must install the printer driver for the model of printer that is connected to your computer. You install the printer driver either by following the instructions indicated in your printer guide, or by using the operating system’s Add Printer Wizard.
Page 70 Getting Started Using the computer for the first time Sample Control Panel Click Printers and Other Hardware.
Page 71 Using the computer for the first time Click Printers and Faxes. The Printers and Faxes window appears. Sample Printers and Faxes window Click Add a printer. The Add Printer Wizard window appears. Sample Add Printer Wizard Getting Started...
Page 72: Setting Up The Fax Function
Click Properties from the drop-down menu. Click the Devices tab. Click Properties. Click the Receive tab. Click Enable device to receive. To disable the auto-receive function, repeat steps 1-4. But, under the device name, right-click Toshiba Soft Modem AMR, select Receive and then select Disable.
Page 73: Powering Off The Computer
Powering off the computer It’s a good idea to power off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 74: Cleaning The Computer
To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer or network administrator for suggestions for appropriate cleaning products. CAUTION: Keep liquid, including cleaning fluid, out of the computer’s keyboard, speaker grille, and other openings.
Page 75 PORT-Noteworthy computer lock cable To secure the computer: Loop the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot located on the right side of the computer, then rotate the key a quarter turn and remove it.
Page 76: Chapter 3: Learning The Basics
Chapter 3 Learning the Basics This chapter lists some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 77: Using The Keyboard
❖ Back up your files to diskettes (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 78: Character Keys
Learning the Basics Using the keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The spacebar creates a space character instead of just passing over an area of the page. ❖...
Page 79: Windows ® Special Keys
® Windows special keys ® Windows special keys The keyboard provides two keys that have special functions in the operating system: ❖ The Windows ❖ The Application key has the same function as the secondary (or right mouse) control button. Overlay keys Sample keyboard overlay keys The keys with numbers and symbols on the front of them...
Page 80 Learning the Basics Using the keyboard Using the numeric keypad overlay To turn on the numeric keypad overlay, press simultaneously. The numeric mode keyboard indicator light glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on.
Page 81: Emulating A Full-Size Keyboard
NOTE: The Fn emulation key is not supported when using a USB keyboard. TOSHIBA Console button The TOSHIBA Console button provides quick access to some common functions. When the default setting is active, the TOSHIBA Console button brings up the TOSHIBA Console.
Page 82: Starting A Program
Learning the Basics Starting a program For information on how to program the button, see Management” on page Starting a program The easiest way to start a program is to click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options: ❖...
Page 83: Printing Your Work
To save: ❖ A file you are updating, open the program’s File menu and click Save. ❖ A new file, choose Save As from the File menu, type a name for the file, and click OK. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 84: Using Diskettes
Learning the Basics Using diskettes Sample Print window Click OK or Print to print. Using diskettes The 3.5-inch internal or external diskette drive lets you use high-density (1.44 MB) diskettes for data transfer and storage. Diskette drive LED Sample diskette drive The diskette drive LED glows while the drive is being accessed.
Page 85: Inserting And Removing Diskettes
Inserting and removing diskettes Hold the diskette so that the arrow on its upper surface points toward the drive. Push the diskette gently into the drive slot. When the diskette is in place, the eject button pops out. To release a diskette from the drive, push the eject button. CAUTION: Never press the eject button or turn off the computer while the diskette drive LED is glowing.
Page 86: Backing Up Your Files
Learning the Basics Backing up your files ❖ Never eat, smoke, or use erasers near your diskettes. Foreign particles can damage the diskette’s surface. ❖ Keep your diskettes away from sources of magnetism, such as speakers and radios, since these can destroy data. Backing up your files Backing up your files means copying individual files to a diskette or copying entire sections of your hard disk to...
Page 87: Playing A Cd Or Dvd
Click the icon for the diskette drive (3 1/2 floppy [A:]). HINT: You can also back up a file to a diskette by clicking the file (or files) you want to backup with the secondary button, then pointing to Send To and clicking 3 1/2 Floppy (A:). Playing a CD or DVD Your computer may have a DVD-ROM, DVD-ROM/CD-RW, CD-ROM or CD-R/CD-RW drive that can read both DVD-...
Page 88: Drive Components And Control Buttons
Learning the Basics Playing a CD or DVD Drive components and control buttons The CD/DVD control buttons are located at the front edge of the computer and can be accessed when the display panel is closed or open. Components DVD-ROM or DVD-ROM/CD-RW drive Sample DVD-ROM or DVD-ROM/CD-RW drive Use the eject button to open the disc tray.
Page 89: Cd/Dvd Control Buttons
The manual eject button allows you to manually open the disc tray when power to the computer and the drive is off. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip.
Page 90: Cd/Dvd And Digital Audio Modes
Learning the Basics Playing a CD or DVD The next track button skips to the following track on the disc. You can eject a disc by pressing the stop/eject button twice. Use this method to eject a disc when the computer is turned off and the sound subsystem is turned on.
Page 91: Inserting A Disc
CD /DVD mode Operating If a CD is in the drive, the system is Windows Media running starts and the digital audio and you files begin to play. press Play/ If a DVD is in the drive, Pause WinDVD DVD begins to play. CAUTION: Do not install or remove a memory module while the DVD-ROM drive power is on.
Page 92 Learning the Basics Playing a CD or DVD The disc tray partially opens. CAUTION: To avoid damaging a disc or losing data, check that the disk/disc activity light is off before opening the disc tray. Grasp the disc tray and pull it fully open. Hold the disc by its edges and check that it is clean and free of dust.
Page 93: Playing An Audio Cd
Spindle Disc Positioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle. If you position the disc incorrectly, it can jam the disc tray. Close the disc tray by pressing gently on the center of the tray until it clicks, indicating that it is locked.
Page 94: Playing A Dvd
Learning the Basics Playing a CD or DVD Rewind Play Stop Previous track Next track Mute Sample Windows Media Playing a DVD This guide has an entire chapter devoted to using WinDVD. For information about how to play back a DVD, see “WinDVD™...
Page 95: Removing A Disc With The Computer On
Removing a disc with the computer on CAUTION: Never press the eject button while the computer is accessing the drive. Wait for the disk/disc activity light on the system indicator panel to turn off before opening the disc tray. Locate and press the eject button. The disc tray partially opens.
Page 96: Caring For Cds And Dvds
Learning the Basics Using the DVD-ROM or DVD-ROM/CD-RW multifunction drive Caring for CDs and DVDs ❖ Store your discs in their original containers to protect them from scratches and keep them clean. ❖ Never bend a disc or place heavy objects on top of it. ❖...
Page 97: Setting Up For Communications
Setting up for communications To communicate across the telephone lines with another computer, you need: ❖ The computer’s modem ❖ A telephone line ❖ A communications program To connect to the Internet, you need a Web browser, such as ® Microsoft Internet Explorer.
Page 98: Connecting Your Computer To A Network
Learning the Basics Setting up for communications Connecting to the modem port Plug the other end of the RJ11 telephone cable into the modular jack of a standard voice-grade telephone line. Connecting your computer to a network You can connect your computer to a network locally or remotely.
Page 99: Powering Down The Computer
Powering down the computer When you power down the computer, you have a number of options to choose from: ❖ Turn Off or Shut down, which power off the computer ❖ Hibernation, which saves the current operating state to the hard disk and powers off the computer ❖...
Page 100: Restart Command
Learning the Basics Powering down the computer ❖ When starting up again, the system does not automatically open the programs and files you were previously using. Restart command Restart is the same as Turn Off or Shut down but automatically powers up the computer. Use it when you need to reload the operating system, for example to activate changes to system settings.
Page 101: Stand By Command
Stand by command The Stand by command puts the computer into a power- saving mode. Standby stores the current state of the computer in memory so that, when you restart the computer, you can continue working from where you left off. Factors to consider when choosing Standby: ❖...
Page 102: Turning Off Or Shutting Down More Quickly
To do so, you must preset the mode. Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. ® XP Pro operating system and...
Page 103 You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See Management” on page Sample TOSHIBA Power Saver Properties window Click Details in the Running on batteries section. The Full Power Properties window appears.
Page 104 Learning the Basics Using Turn Off or Shut down Click the System Power Mode tab. Sample Full Power Properties window Select Power Off for the options you want. ❖ When I press the power button Set this option to Power Off if you want the computer to turn off when you press the power button.
Page 105: Starting Again After Turn Off Or Shut Down
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Full Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again after Turn Off or Shut down To start the computer up again, press and release the power button;...
Page 106: Going Into Hibernation Mode
Using Hibernation Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See Management” on page Sample TOSHIBA Power Saver Properties window Click the Hibernate tab, then click the Enable hibernate support check box.
Page 107 not a member of a domain, power off the computer using the Hibernation command as follows: Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window with shift key held down to show Hibernate option Hold down the shift key and click Hibernate (“Hibernate”...
Page 108: Going Into Hibernation Mode More Quickly
The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See Management” on page 194.
Page 109 Learning the Basics Using Hibernation Sample TOSHIBA Power Saver Properties window In the Running on batteries area, click the Details button.
Page 110 Learning the Basics Using Hibernation Click the System Power Mode tab. Sample Full Power Properties window Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernation so that the computer will go into Hibernation mode when you press the power button.
Page 111: Starting Again From Hibernation
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Full Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Hibernation...
Page 112: Using Standby
Learning the Basics Using Standby Using Standby If you are using the Windows or are using the Windows not a member of a domain, power off the computer using the Stand by command as follows: Click Start, Turn off computer. The Turn off computer window appears.
Page 113: Going Into Standby Mode More Quickly
Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See Management” on page Learning the Basics Using Standby 194.
Page 114 Learning the Basics Using Standby Sample TOSHIBA Power Saver Properties window Click Details in the Running on batteries section. The Full Power Properties window appears. Click the System Power Mode tab.
Page 115 Sample Full Power Properties window Select Standby for the options you want. ❖ When I press the power button Set this option to Standby so that the computer will go into Standby mode when you press the power button. ❖ When I close the lid Set this option to Standby so that the computer will go into Standby mode when you close the display...
Page 116: Starting Again From Standby
Click All for the settings to apply whether you are using battery power or outlet power. Click OK to close the Full Power Properties window. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Standby To start the computer from Standby mode, press and release the power button until the on/off light changes to green.
Page 117: Chapter 4: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 118: Using Additional Batteries
Mobile Computing Running the computer on battery power until the battery is fully discharged. Please see battery life” on page 119 continuously operated on AC power, either through an AC adapter or a docking station for an extended period, more than a month, the battery may fail to retain a charge.
Page 119: Maximizing Battery Life
If the battery has at least five minutes of operating time, continue operating until the battery is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4. Mobile Computing Running the computer on battery power toshiba.com...
Page 120: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at toshiba.com.
Page 121: Charging The Main Battery
Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on. TECHNICAL NOTE: The battery may take longer to charge with many applications open at the same time.
Page 122: Monitoring Battery Power
Mobile Computing Monitoring battery power To recharge the RTC battery, plug in the computer and leave it turned on for 10 hours or longer. NOTE: It is seldom necessary to charge the RTC battery because it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.
Page 123: Conserving Battery Power
Click Performance and Maintenance. Click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See Management” on page Choose the Power Save Modes tab, then under the Running on Batteries section, click Details.
Page 124: What To Do When The Battery Runs Low
Toshiba’s power-saving options greatly increase the length of time you can use the computer before it becomes necessary to recharge the battery. Toshiba has combined these options into preset power usage modes. You may also set individual power-saving options to suit your own needs.
Page 125: Setting Battery Alarms
Click Performance and Maintenance. Click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. You can also access the TOSHIBA Power Saver Properties window by using the TOSHIBA Console button. See Management” on page Choose the Power Save Modes tab, then under the Running on Batteries section, click Details.
Page 126: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery When your battery power is running low, you have two options: connect the computer to an AC power source or install a charged battery. NOTE: If your battery discharges fully, your information will be lost.
Page 127: Removing The Battery From The Battery Cover
CAUTION: For environmental reasons, do not throw away a spent battery. Please return spent batteries to your Toshiba dealer. Removing the battery from the battery cover Position the battery cover with the battery facing up.
Page 128: Inserting A Charged Battery
Mobile Computing Changing the main battery Battery cover latch Removing the battery from the battery cover Lift the battery from the battery cover. Inserting a charged battery Turn off the computer. See command” on page Remove all cables connected to the computer. Wipe the battery terminals of the charged battery with a clean cloth to ensure a good connection.
Page 129: Disposing Of Used Batteries Safely
Slide the battery release latch toward the back of the computer. You may need to press the cover in from the edge slightly to return the latch to the closed position. Inserting the battery cover CAUTION: Failure to lock the battery cover can result in the battery falling out of the computer case.
Page 130: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for guides, power cables, compact discs and diskettes.
Page 131: Chapter 5: Getting To Know The Windows
Chapter 5 Getting to Know the Windows Operating System This chapter introduces the Windows by guiding you through a few basic tasks. Whether you have used a Windows the skill and confidence you will gain from this chapter will more than offset the short amount of time spent going through these lessons.
Page 132: The Windows ® Xp Operating System
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop find documents, set up system components, and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. However, the differences are not significant and do not indicate any change in the functionality of your system.
Page 133 Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area.
Page 134: Windows ® Xp File System
Getting to Know the Windows ® XP Operating System Lesson 1: Exploring the desktop Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open.
Page 135: Lesson 2: Using The Touchpad And Control Buttons Together
Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together Computers can be connected together to form a network, so that programs, documents and other data can be quickly and easily shared between computers. You can use the My Computer feature, accessible through the Start menu, to access any file in the Windows For more information, read the Microsoft...
Page 136 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together With the cursor in an empty area of the desktop, click the secondary button to open the desktop shortcut menu. As the name implies, shortcut menus provide quick access to many operating system features.
Page 137 Getting to Know the Windows ® XP Operating System Lesson 2: Using the TouchPad and control buttons together The My Computer window is closed. Click an empty area of the taskbar at the bottom of the screen and, while holding down the primary button, use the TouchPad to drag the cursor to the right edge of the desktop, then release the primary button.
Page 138: Lesson 3: Learning About The Internet
Getting to Know the Windows ® XP Operating System Lesson 3: Learning about the Internet To unlock it: Right-click the taskbar. A menu appears. If the Lock the taskbar option has a check mark, then the feature is in use. Click Lock the taskbar.
Page 139: Lesson 4: Creating A New Document
Getting to Know the Windows ® XP Operating System The My Computer window appears. On the View menu, point to Toolbars, then click Address Bar. The operating system displays the address bar. It indicates that you are in “My Computer.” Sample My Computer window Lesson 4: Creating a new document This lesson teaches you how to create a text file without...
Page 140 Getting to Know the Windows ® XP Operating System Lesson 4: Creating a new document To give your document a meaningful name, type and press Doc.txt Double-click the My New Doc icon. The operating system opens the new document in Notepad—the text editor built into the operating system.
Page 141: Lesson 5: Creating A New Folder
Getting to Know the Windows ® XP Operating System Lesson 5: Creating a new folder DEFINITION: A folder is an area where you can store documents and other types of files. It is analogous to a file folder stored in a file cabinet.
Page 142: Lesson 6: Starting Programs
Getting to Know the Windows ® XP Operating System Lesson 6: Starting programs Close the window by clicking its Close button and continue with the next lesson to learn how to start programs. Lesson 6: Starting programs Usually, you will know which program you want to use for a particular task.
Page 143 Getting to Know the Windows ® XP Operating System To open the second program: ❖ Click Start, then click All Programs. ❖ Point to Accessories, then click Windows Explorer. The operating system opens Windows provides access to all your computer’s resources. For example, it lets you see all the files in a particular folder on the computer’s hard disk.
Page 144: Lesson 7: Resizing, Repositioning, And Hiding Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Lesson 7: Resizing, repositioning, and hiding windows If you have followed the lessons in this chapter, you now have a screen with several program windows open. You can organize these windows by resizing and repositioning them so that you can see more than one window at a time.
Page 145: Using The Taskbar
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows Using the taskbar If you have applications open on the desktop, you can rearrange them by pointing to the applications’ button on the taskbar through use of the TouchPad and clicking the secondary button.
Page 146: Resizing And Moving Windows
Getting to Know the Windows ® XP Operating System Lesson 7: Resizing, repositioning, and hiding windows The Paint window expands to fill the screen, hiding everything except the taskbar. Notice that the Maximize button has changed. It is now called the Restore button. HINT: Maximizing a program is a good way to work when you are only using that program and do not want any distractions on the screen.
Page 147: Lesson 8: Closing Programs
Getting to Know the Windows ® XP Operating System Now that the windows are side by side, you can see how you could refer to one window while working in the other. Resizing and moving windows allows you to rearrange the desktop to suit your needs.
Page 148: Lesson 9: Creating Shortcuts
Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Lesson 9: Creating shortcuts By adding shortcuts to your desktop, you can open programs or files with the click of a button. You will probably want to create shortcuts for the programs you use most frequently.
Page 149: Creating A Shortcut To The Character Map
Getting to Know the Windows ® XP Operating System Type Calculator The operating system displays the new shortcut on your desktop. Creating a shortcut to the Character Map Use this method when you don’t know the name and location of the program file. Click Start, then click Search.
Page 150 Getting to Know the Windows ® XP Operating System Lesson 9: Creating shortcuts Sample Search Results window HINT: Search also allows you to perform searches on the Internet. Click All files and folders. Type char name. The operating system displays a list of all the files with “char”...
Page 151: Lesson 10: Changing The Screen Saver
Getting to Know the Windows ® XP Operating System A shortcut to the Character Map appears on your desktop. NOTE: Shortcut icons can be recognized by an arrow in the lower- left corner of the icon. Deleting the icon will not affect the program itself.
Page 152 Getting to Know the Windows ® XP Operating System Lesson 10: Changing the screen saver Move the cursor to an empty area of the desktop, then click the secondary button. The operating system displays the desktop shortcut menu. Click Properties. The operating system displays the Display Properties window.
Page 153: Lesson 11: Setting The Date And Time
Getting to Know the Windows ® XP Operating System After you have chosen a screen saver pattern and applied it to your desktop, click OK. The operating system returns you to the desktop. You can view any object’s properties by clicking the object with the secondary button, then choosing Properties from the shortcut menu that appears.
Page 154: Lesson 12: Removing Objects From The Desktop
Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop Sample Date and Time Properties window HINT: To open the Date and Time Properties window more quickly, either click the time display on the taskbar with the secondary button, then click Adjust Date/Time, or double-click the time display.
Page 155 Getting to Know the Windows ® XP Operating System Lesson 12: Removing objects from the desktop The icon disappears, but it has not really gone. It is merely set aside in the Recycle Bin so that you can restore or delete it later. Repeat step 1 for any other icons you created during this tutorial.
Page 156: Lesson 13: Using System Restore
Getting to Know the Windows ® XP Operating System Lesson 13: Using System Restore documents, and sometimes even programs. Still, the process is the same. Just drag an object’s icon to the Recycle Bin. If you change your mind and want to restore an object you sent to the Recycle Bin, select the object with the secondary button and click Restore.
Page 157: Lesson 14: If I Am Lost, What Do I Do
Getting to Know the Windows ® XP Operating System Sample System Restore welcome screen The Windows process of storing your system settings for future use. It also guides you through restoring your system to the selected date or time. Lesson 14: If I am lost, what do I do? This teaches you how to use some of the Help features in the ®...
Page 158 Getting to Know the Windows ® XP Operating System Lesson 14: If I am lost, what do I do? If you do not see the index, click index. Help and Support displays the Index. Sample Help and Support Index The left side of the screen contains the index. The text box above the index, where the cursor is flashing, lets you type in a topic you want to find in the index.
Page 159: Using The Windows ® Xp Tour
Getting to Know the Windows ® XP Operating System Sample help window for drawings Notice that under the category subcategory: Highlight Help opens a topic screen that, in the window’s right pane, gives a brief description of Paint and provides different ways for accessing the program, including through use of a hot link (Paint).
Page 160: Lesson 15: Turning Off Your Computer
Getting to Know the Windows ® XP Operating System Lesson 15: Turning off your computer To start the tour: Click Start, then click Tour Windows XP The Windows XP Tour window appears. Follow the instructions. Sample Windows XP Tour window Lesson 15: Turning off your computer It is very important that you let the operating system turn off your computer.
Page 161: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Page 162: Personalizing Your Desktop
Exploring Your Options Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar —...
Page 163: Changing Desktop And Browsing Style
Changing desktop and browsing style The operating system enables you to customize the way you view your desktop and browse the files and folders on your local computer or network file server. You can arrange that: ❖ Items that normally require a double-click will open with a single click.
Page 164: Personalizing Individual Windows
Exploring Your Options Personalizing your desktop Sample Web-style option Select the preferred options. Click Apply, then click OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis.
Page 165: Customizing Window Toolbars
Click the Add Web content to your desktop link. Follow the on-screen instructions. Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus.
Page 166: Displaying Information About Each Folder
Exploring Your Options Personalizing your desktop The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displays buttons for commonly used Links Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears.
Page 167 The My Computer window appears. Double-click the folder you want to open. In the Tools menu, select Folder Options. The Folders Options box appears. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then click OK. Helpful information on how to use the folders appears on one side of the window.
Page 168: Using Your Computer At The Office
Exploring Your Options Using your computer at the office Using your computer at the office By connecting an external monitor, external full-size keyboard and an external mouse, you can work with your notebook as if it were a standard office computer. An external monitor connects to the RGB (monitor) port.
Page 169: Setting Up For Communications
Follow the on-screen instructions. Setting up for communications In order to connect to the Internet, use an online service, or access a network through a dial-up connection, you need: ❖ A modem (one comes with your computer) ❖ A telephone line ❖...
Page 170: Connecting Your Computer To A Network
Exploring Your Options Exchanging data with another computer To find out which port your modem is connected to in the operating system: Click Start, then click Control Panel. The Control Panel appears. Click Printers and Other Hardware. Click Phone and Modem Options. The Phone and Modem Options window appears.
Page 171: Accessing The Wireless Modules Using Your System Tray
A remote network, you need a dial-up connection. ❖ A wireless network, you need a wireless networking PC Card, or contact your authorized Toshiba representative. Setting up a dial-up connection To set up a dial-up connection, use the New Connection Wizard: Click Start and point to All Programs.
Page 172: An Overview Of Using The Internet
Your optional Wi-Fi Mini PCI module is integrated into your computer system. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. An overview of using the Internet The following sections give a quick introduction to the...
Page 173: The World Wide Web
The World Wide Web The World Wide Web (or ‘Web’) is a subset of the Internet — a collection of interlinked documents (located on computers connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP). The World Wide Web offers information as text, images, audio, or video to be referenced from anywhere in the world.
Page 174: Surfing The Internet
Exploring Your Options An overview of using the Internet Connect your computer’s modem to a telephone line. For more information on connecting a modem, see “Connecting the modem” on page Start your Web browser. Have your modem dial the ISP’s telephone number, and establish a connection with the ISP’s computer.
Page 175: Uploading And Downloading Files From The Internet
File Transfer Protocol (FTP) features of your Web browser to transfer large amounts of data. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 176: Viewing Presentations Or Dvd Movies On Your Television
Exploring Your Options Exploring video features For information on connecting: ❖ An external monitor, see devices” on page ❖ A television set, see “Viewing presentations or DVD movies on your television.” Viewing presentations or DVD movies on your television To view a DVD movie or Windows screen mode on your television, you need RCA-type video and audio cables.
Page 177: Playing Dvds
If a movie is already playing, turn it off and repeat step 3. NOTE: As you press the Fn and F5 keys, the display box shifts to highlight the different display output devices. When the TV box is highlighted, release the Fn and F5 keys to send the display to the video out.
Page 178: Recording Sounds
Exploring Your Options Exploring audio features Recording sounds You can make audio recordings and save them as .wav files by connecting an external microphone or other sound source to the microphone in jack and using the Sound Recorder feature in the operating system. DEFINITION: A .wav (pronounced “wave”) file is the format for storing sound in files.
Page 179: Adjusting Recording Quality
Positioning bar Sample Sound Recorder screen Click the Record button and speak normally into the microphone. NOTE: You can only record 60 seconds at a time. When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 180: Using External Speakers Or Headphones
Exploring Your Options Exploring audio features In the Audio Properties window, adjust the Sound Playback quality and volume, and the Sound Recording volume. Click OK. Your new settings take effect the next time you record. Using external speakers or headphones Your computer is equipped with a full stereo sound system and internal speakers.
Page 181: Using Pc Cards
Adjust the volume: ❖ For external speakers, use the volume controls on each speaker. ❖ For headphones, use the computer’s volume control dial. Using PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer.
Page 182: Inserting Pc Cards
Exploring Your Options Using PC Cards Inserting PC Cards Inserting a PC Card If your PC Card does not support hot swapping, save your data and turn off the computer before inserting the PC Card. For more information, see page 183.
Page 183: Removing Pc Cards
Removing PC Cards Click the Safely Remove Hardware icon on the System tray. Click Safely remove xxxx, where xxxx is the identifier for your PC Card. The operating system advises you that you may safely remove the card. Press the PC Card eject button next to the PC Card slot in use.
Page 184: Using Sd Cards
Exploring Your Options Using SD cards ❖ Never remove a network card while you are connected to a network. ❖ Never remove a SCSI card while any of the SCSI devices connected to it are operating. DEFINITION: SCSI is an acronym for Small Computer Systems Interface.
Page 185: Removing A Sd Card
Removing a SD card Right-click the SD drive’s icon and select Eject from the pop-up menu. Press the card inward to release it. The card pops out slightly. Lift the left side of the computer, grasp the card, and pull it straight out.
Page 186: Chapter 7: Toshiba Utilities
TOSHIBA Power Saver ❖ Toshiba Hardware Setup TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 187: Fn-Esse
Sample TOSHIBA Accessibility window Put a check mark next to the desired option. Click Apply, then click OK. The function is now active. Fn-esse The operating system shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, Toshiba Utilities Fn-esse...
Page 188: Starting Fn-Esse
“Hot Keys” on page You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse To access Fn-esse, click Start, All Programs, Toshiba Utilities and Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse keyboard The keys are color-coded as follows: ❖...
Page 189: Assigning A Key To A Program Or Document
The program or document is now associated with the key you just selected. To open the program or document, press Windows plus the appropriate key from within any ® program. Toshiba Utilities Fn-esse ® Explorer (or the...
Page 190 Toshiba Utilities Fn-esse Using the keyboard or TouchPad To assign a key to open a program or document: Start Fn-esse. Perform one of the following: ❖ Using the keyboard, press and hold the press the desired assignment key. ❖ Using the TouchPad, move the cursor over the desired key and press the secondary button.
Page 191: Viewing Existing Key Assignments
The hotkey utility allows you to receive a confirmation message when you use the hot key combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate the utility: Click Start, All Programs, Toshiba Utilities and then click Hotkey utility. plus the appropriate key from within any ®...
Page 192: Toshiba Console
TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. You can normally access the TOSHIBA Console in two ways: ❖ Press the TOSHIBA Console button located above the F6 key on your keyboard.
Page 193: Customize Your Computer
Sample TOSHIBA Console window The TOSHIBA Console offers three categories of features: ❖ Customize Your Computer ❖ Network ❖ Security Customize Your Computer The features available in this category are: ❖ Power Management (See “Power Management” on page ❖ TOSHIBA Button Controls (See “TOSHIBA Button Controls”...
Page 194: Network
The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the TOSHIBA Console: Press the TOSHIBA Console button.
Page 195 You can either use one of the preset modes or create and use your own customized mode. The preset modes cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change become effective when you click either OK or Apply.
Page 196 Toshiba Utilities TOSHIBA Console The windows and settings for creating and customizing battery power modes are described in the following sections. Running on batteries section The preset modes are: ❖ Long Life ❖ Normal ❖ High Power ❖ DVD Playback ❖...
Page 197: Toshiba Button Controls
Power Saver Properties window. You can change the name here if you wish. TOSHIBA Button Controls The TOSHIBA Button Controls allow you to enable or disable the TOSHIBA Console and Internet buttons and the programs associated with them. Those buttons are located just above the function keys at the top of the keyboard.
Page 198: Toshiba Hardware Setup
Toshiba Utilities TOSHIBA Console Sample TOSHIBA Controls Properties window Click the Buttons tab Check the boxes for the TOSHIBA Console button and/ or the Internet button. Under Select a Program, make the desired selections. Click Apply, then click OK. Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool.
Page 199 Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window appears with tabs for the following: ❖ Display — Allows you to select the built-in LCD and/or external monitor when the computer powers on. ❖ Boot Priority — Allows you to change the sequence in which your computer searches the drives for the operating system.
Page 200 Toshiba Utilities TOSHIBA Console ❖ Keyboard — Allows you to enable or disable the “wake- up on keyboard” feature. The feature allows you to “wake” the machine from Standby mode by pressing a key. ❖ USB — Allows you to enable or disable USB Legacy Emulation.
Page 201: Chapter 8: Windvd™ 2000
WinDVD is a software program for playing back CDs and DVDs. This chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, Toshiba recommends playing DVDs while your computer is connected to AC power. For systems with a DVD-ROM drive or DVD-ROM/CD-RW multifunctional drive, you can use InterVideo WinDVD to play DVDs.
Page 202 WinDVD™ 2000 Playing DVDs a DVD-ROM or DVD-ROM/CD-RW multifunctional drive, WinDVD is preinstalled on the hard disk. WARNING: Before playing a DVD, turn down the volume. Playing the disc at maximum volume could damage your ears. See the control panel playback buttons” on page 205 volume control buttons.
Page 203: Using The Windvd Toolbar
Time slider Playback speed slider Sample InterVideo WinDVD 2000 window Using the WinDVD toolbar The WinDVD window contains a toolbar at the top and a status bar at the bottom. If the toolbar or status bar does not appear, you can display them by following the instructions in “Setting general properties”...
Page 204: Using The Windvd Control Panel
WinDVD™ 2000 Playing DVDs current time slot is indicated on the right side of the status bar. The playback speed slider enables you to control the speed at which the DVD plays. Move the slider to the left to slow the playback speed or move it to the right to play the DVD faster.
Page 205: Using The Control Panel Playback Buttons
WinDVD™ 2000 Playing DVDs You can open a shortcut menu, by positioning the cursor over the WinDVD window, other than over the control panel, then clicking the secondary button. The shortcut menu contains the same features as the control panel, plus the enable caption feature, which displays captions for the hearing impaired.
Page 206 WinDVD™ 2000 Playing DVDs Click this To do this Repeat — repeat the current chapter, if the DVD contains chapters. Otherwise this but- ton repeats the DVD from the beginning. When the repeat button is activated, the repeat symbol appears to the left of the chapter number on the control panel counter.
Page 207: Maximizing The Video Window
Click this Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To do this Fast reverse — move quickly backward through the DVD content. When you reach the desired location, click the play button to resume playing the DVD.
Page 208: Using Playlists
WinDVD™ 2000 Using playlists To display the control panel again, double-click anywhere in the video window. Using playlists A playlist is a customized list of DVD files in the order in which you want to view them. For example, you may want to create a playlist for DVDs that contain music files, so that you can play the music selections you want in the order you want to hear them.
Page 209: Loading And Playing Playlists
DVD files have an .mpg, .vob or .ac3 file name extension. After selecting a file, the file name appears in the Selected files list. You can also double-click a file name to add it to the playlist. Add as many files as you wish to the playlist. You must add the files in the order in which you want to play them.
Page 210: Customizing Windvd
WinDVD™ 2000 Customizing WinDVD Customizing WinDVD You can control several general WinDVD characteristics, such as whether the toolbar and status bar are visible, as well as numerous audio and display features. You control these general, audio and display features from the Properties window.
Page 211 current region code of the WinDVD player installed in your computer is Region 1, comprising the United States and Canada. NOTE: Most DVD-ROM or DVD-ROM/CD-RW drives let you change the region code, usually between one and five times. Once a drive has reached the limit, the region code cannot be changed again.
Page 212: Setting Audio Properties
WinDVD™ 2000 Customizing WinDVD Setting audio properties In the Properties window, click the Audio tab. The Audio tab moves to the front. The Current audio track box displays the current audio format and attributes. Sample Properties window with Audio tab on top In the Audio channels box, select the appropriate speaker mode to match your setup as follows: ❖...
Page 213: Setting Display Properties
Setting display properties In the Properties window, click the Display tab. The Display tab moves to the front. Sample Properties window with Display tab selected Select the Lock aspect ratio check box to maintain the original aspect ratio when the video window is resized. Otherwise clear the check box.
Page 214: Using Windvd Advanced Features
WinDVD™ 2000 Using WinDVD advanced features select WinDVD to display the control panel in a different format. You can also select About to display copyright and version information. Using WinDVD advanced features The features described in this section are available on the WinDVD expanded control panel.
Page 215 Using WinDVD advanced features Use this To do this Playback speed— control the speed at which the DVD plays. Move the slider to the left to slow the play- back speed or move it to the right to play the DVD faster.
Page 216 WinDVD™ 2000 Using WinDVD advanced features Use this To do this Numeric keypad — use these buttons to select a chapter by entering the chapter number. After you have entered a chapter number, click the enter button on the lower-right corner of the numeric keypad ↵...
Page 217 Using WinDVD advanced features Use this To do this Chapter button — display a list of all the chapters in the cur- rent DVD. Select the chapter you want to play, or use the numeric keypad to enter the chapter number.
Page 218 WinDVD™ 2000 Using WinDVD advanced features Use this To do this Subtitles — display a list of all the available language subtitles. This button is enabled only for DVD content that includes subtitles and supports dynamic subtitle information changes. Select the desired language, or select Default to dis- play subtitles in the...
Page 219: Zooming In
Use this Zooming in You can zoom in on an area of the WinDVD video window to get a closer look. Click the Zoom button, located in the upper-left corner of the directional button panel. Position the cursor over the top-left corner of the area you want to view in close up.
Page 220: Panning
WinDVD™ 2000 Using WinDVD advanced features Release the primary button. WinDVD automatically fills the window with the selected area. Panning Once you are zoomed in on an area of the WinDVD video window, you can move the zoom window location using the pan feature.
Page 221: Launching An Internet Browser From Windvd
Launching an Internet browser from WinDVD The adjustment window provides another set of sliders for adjusting volume and brightness. It also provides two color control sliders. Move the Color control 1 slider to the right to increase the blue and decrease the yellow color values. Move the slider to the left to increase the yellow and decrease the blue color values.
Page 222: Chapter 9: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 223 To close a program that has stopped responding: Press Ctrl Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 224: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start.
Page 225: The Windows ® Operating System Is Not Working
The Windows® operating system is not working The computer displays the message. The computer was placed in Standby mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the RTC battery, leave the computer plugged into a live wall outlet and turned on for several hours.
Page 226: The Windows ® Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 227: Internet Problems
The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, time of day (when everyone else is surfing, your access can be slow) and popularity of the site.
Page 228: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict You can connect to Support Online by clicking Support from the menu. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 229 the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works. These channels of communication are commonly referred to as system resources. Interrupt Request Channel The channel to the CPU is called an Interrupt Request (IRQ) because it interrupts what the processor is doing and requests some of the processor’s time.
Page 230: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
Page 231 type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: Click Start, Control Panel, Performance and Maintenance, Administrative Tools. Double-click the Computer Management icon. In the left pane, click Device Manager. To view the device(s) installed, double-click the device type.
Page 232: Memory Module Problems
If Something Goes Wrong Resolving a hardware conflict Memory module problems CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its gold connector bar (on the side you insert into the computer).
Page 233 Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.
Page 234: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict your software using the hard disk more? Is the display set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts. For more information on maximizing battery power, see “Charging batteries”...
Page 235 password, press the If no password is registered, press reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, press simultaneously (once). If this does not correct the problem, press display priority to its previous setting.
Page 236: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Change the Colors option and click OK. For more information, see Windows A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware.
Page 237 Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check and click Properties.
Page 238: Dvd-Rom Or Dvd-Rom/Cd-Rw Drive Problems
If Something Goes Wrong Resolving a hardware conflict Some programs run correctly but others do not. This is probably a configuration problem. If a program does not run properly, refer to its documentation and check that the hardware configuration meets its needs. A diskette will not go into the diskette drive.
Page 239 Examine the disc to see whether it is dirty. If necessary, wipe it with a clean damp cloth dipped in water or a neutral cleaner. Replace the disc in the tray. Make sure it is lying flat, label side up. Press the disc down until it locks on the spindle. Close the drive tray carefully, making sure it has shut completely.
Page 240 If Something Goes Wrong Resolving a hardware conflict fast-forward and rewind during the legal notices at the beginning of a movie. Playback performance is poor. Make sure your system’s A/C adapter is plugged in and the system’s power setting is on full. The Root or Title menu does not open.
Page 241 Ensuring DMA (Direct Memory Access) is turned on. “Secondary IDE Channel DMA setting” on page 241. If you have installed new hardware (such as a new graphics card or audio card), ensure the component’s drivers support Microsoft WinDVD. Contact the manufacturer of the component. Verifying that your display driver resolution, color depth and refresh rate are optimal for DVD playback.
Page 242 If Something Goes Wrong Resolving a hardware conflict Sample Secondary IDE Channel Properties window Click Advanced Settings. Look at Device 0. The current transfer mode should be Ultra DMA Mode 2. If it isn’t, select Ultra DMA Mode 2 from the pull-down menu and click OK. WinDVD problems: content issues Movies exhibit poor performance of “Director's Commentary”...
Page 243 WinDVD will not function properly with “debug” software installed. The WinDVD application will not function properly if it detects that debug software is present on the system. Remove the debug software to restore functionality of WinDVD. WinDVD: error messages This table offers descriptions and resolutions for error messages that may appear when using WinDVD.
Page 244 If Something Goes Wrong Resolving a hardware conflict Error message and additional information No audio subsystem could be found for playback. There is a problem with the audio card or audio compo- nent within the system. The problem may be one of the following: The audio card is faulty.
Page 245 Error message and additional information An unexpected error has occurred. This error is unclassified. Report the problem and any error code to your supplier's Technical Support. There is a problem with the copy protection system within the DVD-ROM drive. Playback cannot con- tinue.
Page 246 If Something Goes Wrong Resolving a hardware conflict Error message and additional information This DVD disc cannot be played in this region. The selected region cannot be used due to one of the following: The Region Code of WinDVD and the DVD disc do not match.
Page 247: Sound System Problems
Error message and additional information This file appears to contain unsupported data. The drive or disc cannot be found. This may be caused by one of the following: No disc in the DVD-ROM drive. No DVD-ROM drive. A disc of an unsupported type in the DVD-ROM drive.
Page 248: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict in the Mixer Utility (default Enabled), may cause feedback. Revert to the default settings. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager.
Page 249 PC Card checklist ❖ Make sure the card is inserted properly into the slot. “Using PC Cards” on page 181 Cards. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine.
Page 250 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. Remove the PC Card. If removing the PC Card doesn’t resolve the problem, try restarting the computer. If the computer still doesn’t work, contact the PC Card’s manufacturer.
Page 251: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 252: Modem Problems
Check the communications parameters (baud rate, parity, data length and stop bits) specified in the communications program. It should be set up to transmit at 300, 1200, 2400, 4800, 9600, 14400, 28800, 33600 bps (bits per second) or higher. Refer to the program’s documentation and the modem guide for information on how to change these settings.
Page 253 software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips” on page 76 On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖...
Page 254: If You Need Further Assistance
Your dealer is your best source for current information. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you.
Page 255 Next, try one of Toshiba’s online services. The Toshiba Forum can be accessed through CompuServe go toshiba Toshiba voice contact Before calling Toshiba, make sure you have: ❖ Your computer’s model and model number. ❖ Your computer’s serial number. ❖...
Page 256: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com computers.toshiba.com toshiba.ca toshiba-Europe.com toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V.
Page 257 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico and all of Latin America Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 800-457-7777 (outside of the US) 949-859-4273 (within the US - this call...
Page 258 If Something Goes Wrong Toshiba’s worldwide offices Poland TECHMEX S.A. ul. Partyzantów 71, 43-316 Bielsko-Biala 01-059 Warszawa Poland Singapore Toshiba Singapore Pte. Ltd. 438B Alexandra Rd. # 06-01 Alexandra Technopark Singapore 119968 Slovenia Inea d.o.o. Ljubljanska 80 61230 Domzale Slovenia...
Page 259: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 260: Instant Password Security
An “Unlock Computer” window will appear, prompting you for a password. After typing in the password, press NOTE: To activate the password feature, you must first enable it by using Toshiba Hardware Setup. Refer to on page 198. To activate the password feature: Click Start, Control Panel.
Page 261: Power Usage Mode
Sample power usage modes The power usage mode in the Windows system under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. For more information, “Power Management” on page Hot Keys Power usage mode ®...
Page 262: Standby Mode
Hot Keys Standby mode Standby mode This hot key puts the computer into Standby mode. Sample standby confirmation box ❖ A message box is displayed by default to confirm that the computer is going into Standby mode. Click the checkbox to prevent the message box appearing in future.
Page 263: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box Hibernation mode ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. Click the checkbox to prevent the message box appearing in future.
Page 264: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 265: Display Brightness
Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness. Disabling or enabling the TouchPad This hot key disables or enables the TouchPad. To use the TouchPad, see page Keyboard hot keys This hot key turns the cursor control overlay on and off.
Page 266: Appendix B: Power Cable Connectors
Appendix B Power Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 267: Appendix C: Video Modes
Appendix C Video Modes This appendix lists the video modes supported by the display adapter and identifies the characteristics of each mod The columns in the tables have the following meanings: Mode is the mode number in hexadecimal and is generally used by programmers to specify video modes in programs.
Page 268: Your Computer's Video Modes
Video Modes Your computer’s video modes Scan Freq hor/vert is the horizontal and vertical scanning frequency in Hertz. This is for external monitors only. Your computer’s video modes Your computer supports the video modes defined in this table. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates.
Page 269: Table 2 Video Modes (Xga)
Video mode Type Resolution VGA Text 80 x 25 Characters VGA Grph 320 x 200 Pels VGA Grph 640 x 200 Pels VGA Grph 640 x 350 Pels VGA Grph 640 x 350 Pels VGA Grph 640 x 480 Pels VGA Grph 640 x 480 Pels...
Page 270 Video Modes Your computer’s video modes Resolution 1600 x 1200 1920 x 1440 2048 x 1536 640 x 480 800 x 600 1024 x 768 1280 x 1024 1600 x 1200 1920 x 1440 2048 x 1536 640 x 480 800 x 600 LCD colors CRT colors...
Page 271: Table 3 Video Modes (Ultra Xga)
Resolution 1024 x 768 1280 x 1024 1600 x 1200 1920 x 1440 2048 x 1536 Table 3 Video modes (Ultra XGA) Resolution 640 x 480 800 x 600 1024 x 768 1280 x 1024 Video Modes Your computer’s video modes LCD colors CRT colors 16M/16M...
Page 272 Video Modes Your computer’s video modes Resolution 1600 x 1200 1920 x 1440 2048 x 1536 640 x 480 800 x 600 1024 x 768 1280 x 1024 1600 x 1200 1920 x 1440 2048 x 1536 LCD colors CRT colors 256/256K 256/256K 256/256K...
Page 273 Your computer’s video modes Resolution LCD colors 640 x 480 16M/16M 800 x 600 16M/16M 1024 x 768 16M/16M 1280 x 1024 16M/16M 1600 x 1200 16M/16M 1920 x 1440 16M/16M (Virtual) 2048 x 1536 16M/16M (Virtual) Video Modes Vertical CRT colors frequency (Hz) 16M/16M...
Page 274: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 275 direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission fast infrared gigabyte...
Page 276 Glossary SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 277 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 278 Glossary bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus.
Page 279 color palette — A set of specified colors that establishes the colors that can be displayed on the screen at a particular time. compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another.
Page 280 Glossary direct memory access (DMA) — A dedicated channel, bypassing the CPU, that enables direct data transfer between memory and a device. directory — See folder. disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs.
Page 281 DVD — An individual digital versatile (or video) disc. See also DVD-ROM. DVD-ROM (digital versatile disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD- ROMs.
Page 282 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off.
Page 283 high-density diskette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key — (1) A feature in which certain keys in combination with key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program.
Page 284 Glossary liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 285 MS-DOS prompt — See system prompt. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. network — A collection of computers and associated devices that are connected by communications facilities.
Page 286 Glossary PC Card — A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter. peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU.
Page 287 removable disk — A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi).
Page 288 Glossary Stand by — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. Suspend — A feature of some Windows allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again.
Page 289 Web — See World Wide Web. Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 2.11b communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) —...
Page 290: Index
Index AC adapter 60 AC power light 35, 60, 64 Accessories programs 156 adding memory 47 alarms low battery 125 audio CDs playing 87 audio features 177 avoiding injury 40 battery alarms 125 changing 126 charge not lasting 233 charging 62, 121 conserving power 123 disposal 129 inserting 128...
Page 291 36 primary control 33, 66 secondary control 33, 66 Start 133 stop 37 TOSHIBA Console 34, 81 calculator 148 CD control buttons 89 CD Player control panel 93 CD/DVD control buttons 28, 34, 36, 88, 89 CD/DVDs caring for 96...
Page 292 Index external monitor 168 external speakers 180 headphones 180 modem 97 monitor 54 power cable 61 television 54 to a network 98 USB-compatible keyboard 59 mouse 53 video projector 54 conserving battery power 123 cooling vents CPU 31 copying files 168 cursor control mode light 35 customizing taskbar 162...
Page 293 double-click 66 downloading 175 DVD-ROM 36, 96 launch WinDVD 2000 177 DVD-ROM drive 30, 87, 177, 201 inserting a disc 91 playing DVDs 201 problems 238 removing a disc 95 troubleshooting 231 WinDVD general properties 210 DVD-ROM/CD-RW launch WinDVD2000 177 DVD-ROM/CD-RW drive 30, 87, 96, 177, 201 can’t access disc 238...
Page 294 Index assigning keys 189 change/remove key assignments drag-and-drop 189 keyboard 188 starting 188 using keyboard or pointing device viewing key assignments 191 folders 134 displaying information 166 front panel 34 function keys 33, 78 hard disk drive cover 38 light 36, 64 hardware conflicts 228 resolving 229 headphone out 28, 33...
Page 295 jacks microphone in 28, 33 keyboard 34 character keys 78 Ctrl, Fn, and Alt keys 78 cursor control overlay 80 emulating full-size 81 external 59 Fn-esse 188 function keys 78 hot keys 265 indicator panel 34 lights 34 not working 224, 234 numeric keypad overlay 80 overlay keys 79 unexpected characters 234...
Page 296 Index network accessing 171 connecting to 98 New Connection Wizard 171 Network Setup Wizard 98 New Folder icon 141 new text document 139 next track button 37 Notepad 140 numeric mode light 35 object properties 151 on/off light 35 online tours 159 operating system 23 Paint program 142 parallel port 29...
Page 297 239 computer hangs when PC Card inserted 250 computer will not power up 224 contacting Toshiba 254 corrupted/damaged data files 237 Device Manager 230 disabling a device 230, 231 disk drive is slow 237 display is blank 234...
Page 298 130 saving your work 82 screen 34 blank 234 doesn’t look normal/flickers 235 Screen Saver tab 152 scrolling Toshiba Scroller 67 SCSI (Small Computer Systems Interface) 184 SD cards 32, 184 inserting 184 removing 185 using 184 Search Engine 174...
Page 299 Internet Web sites 256 TOSHIBA Accessibility 186 Toshiba Accessories Information 25 TOSHIBA Button Controls 197 TOSHIBA Console 81, 192 TOSHIBA Console button 34, 81 Toshiba Forum 255 Toshiba Hardware Setup 198 Toshiba online services 255 Toshiba Scroller 67 TouchPad 33...
Page 300 SelectServ 26 wav files recording 178 Web address 138, 174 Web browsers 173 Web sites 254 Support Online 228 Web sites,Toshiba 256 Wi-Fi wireless networking 170 windows hiding 144 repositioning 144 resizing 144, 146 Windows Explorer 142 Windows Help and Support 133...

This manual is also suitable for:

Satellite 2405 series 2400-s201 2400-s202 2400-s251 2400-s252 2405-s201 ... Show all

Toshiba 2400 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Learning the Basics

Chapter 4: Mobile Computing

Chapter 5: Getting to Know the Windows

Chapter 6: Exploring Your Options

Chapter 7: Toshiba Utilities

Chapter 8: Windvd™ 2000

Chapter 9: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cable Connectors

Appendix C: Video Modes

Quick Links

Related Manuals for Toshiba 2400

Summary of Contents for Toshiba 2400