Page 1 Portégé User’s Guide If you need assistance: ❖ Toshiba’s Support Web site support.toshiba.com ❖ Toshiba Customer Support Center Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 158 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at support.toshiba.com. ❖ Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 6 In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 9 Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 11 VCCI Class B Information Modem Warning Notice This information is only applicable if your computer has a modem. Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).
Page 12 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Page 13: Device Authorization
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850 Fax: 03-3457-4868 Device Authorization This device obtains the Technical Regulation Conformity Certification and...
Page 14 Approved Countries/Regions for the Intel Link 5100/5300 Series This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Andorra Austria Belgium Brazil Cambodia Chile Costa Rica...
Page 15 Paraguay Poland Qatar Russia San Marino Singapore South Africa Sri Lanka Tahiti Turk Islands United Kingdom Vatican Virgin Islands Approved Countries/Regions for the Intel Link 622ANHMW and 633ANHMW Series This equipment is approved to the radio standard by the countries/regions in the following table.
Page 16 Czech Republic Ecuador Estonia Germany Grenada Hong Kong India Israel Japan - Jate Kazakhstan Kyrgyzstan Lesotho Luxembourg Malta Montenegro Nambia Netherlands Antilles Nigeria Pakistan Paraguay Poland Qatar Saint Vincent and the Grenadines Serbia Slovenia Spain Switzerland Trinidad and Tobago Uganda Uruguay Vietnam Denmark...
Page 17 Approved Countries/Regions for the Atheros Link AR5B95 Series This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Bulgaria Chile Croatia...
Page 18 Ukraine Yemen Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 19 Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Liechtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK Iceland, Spain O: allowed x: forbidden ❖ To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply.
Page 20 Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Cambodia China Croatia Denmark Egypt Finland...
Page 21 Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Austria Bangladesh Bosnia Cambodia China Croatia Denmark Egypt Finland...
Page 22 UAE (United Arab Emirates) Uruguay Vietnam Approved Countries/Regions for the Realtek This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Albania Australia Bahrain Bolivia...
Page 23: Bluetooth Wireless Technology Interoperability
Europe or support.toshiba.com in the United States for more information. When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth cards from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards...
Page 24 Approved Countries/Regions for use (Bluetooth technology) ® Bluetooth Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Argentina Belgium...
Page 25: Bluetooth Wireless Technology And Your Health
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 26 Canada — Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Taiwan Article 14 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design.
Page 27 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 28 Atheros is a registered trademark of Atheros Communications, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 29: Table Of Contents
Contents Introduction... 36 This guide ...38 Safety icons ...39 Other icons used...39 Your computer’s features and Other documentation ...40 Service options ...40 Chapter 1: Getting Started... 41 Selecting a place to work ...41 Setting up a work environment ...41 Keeping yourself comfortable ...42 Precautions...42 Important information on your computer’s Setting up your computer ...44...
Page 30 Contents Opening the display panel ...48 Turning on the power ...49 Setting up your software...49 Registering your computer with Toshiba ...50 Adding optional external devices...50 Adding memory (optional) ...50 Recovering the Internal Storage Drive ...51 Recovering to out-of-box state Recovering of factory default software Recovering without changing the internal Recovering to a custom size partition ...60...
Page 31 Starting a program from Windows Starting a program using the Search Saving your work ...98 Printing your work ...99 Backing up your work ...100 Restoring your work ...101 Toshiba’s online resources ...101 keyboard ...93 ® keys ...94 Explorer ...96 programs and files field ...97 Contents ®...
Page 32 Setting battery notifications ...110 Conserving battery power ...110 Power Plans...111 Using a hot key to set the Power Plan...112 Using the TOSHIBA eco power plan...113 Changing the main battery ...114 Taking care of your battery ...114 Safety precautions ...114 Maintaining your battery ...115 Disposing of your computer ...115...
Page 33 Chapter 5: Utilities...126 TOSHIBA Assist ...127 Connect...128 Secure...129 Protect & Fix ...130 Optimize...131 TOSHIBA Recovery Media Creator ...132 TOSHIBA Application Installer...132 Setting passwords ...133 Using an instant password...133 Using a supervisor password...134 Using a user password ...135 TOSHIBA Face Recognition Utility...137 TOSHIBA Security Assist ...138...
Page 34 Contents TOSHIBA wireless LAN indicator ...155 TOSHIBA Service Station ...156 TOSHIBA PC Health Monitor ...156 Chapter 6: If Something Goes Wrong...158 Problems that are easy to fix ...158 Problems when you turn on the computer...159 The Windows working...161 Using Startup options to fix problems ...161 Internet problems ...162...
Page 35 Appendix A: Hot Keys/TOSHIBA Cards ... 181 Hot Key Cards ...181 Using the Hot Key Cards ...182 Hot key functions ...183 Volume Mute ...183 Lock (Instant security) ...184 Power plan ...185 Sleep mode ...186 Hibernation mode ...187 Output (Display switch) ...188 Display brightness ...189...
Page 36: Introduction
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to...
Page 37 (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 38: This Guide
Toshiba’s Web site at support.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 39: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 40: Your Computer's Features And Specifications
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at support.toshiba.com. If you have a problem or need to contact Toshiba, see Goes Wrong” on page System icons 158.
Page 41: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. The “Instruction Manual for Safety and Comfort,” that is shipped with your computer, contains important safety information.
Page 42: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, included with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 43 ❖ Avoid prolonged physical contact with the underside or surface of the computer. ❖ Computer base and palm rest can become hot! Avoid prolonged contact to prevent heat injury to skin. Today’s performance computers generate heat under normal operating conditions, as a function of system activity. Avoid extended contact between the computer base or palm rest and you skin.
Page 44: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 45: Connecting To A Power Source
Always use the TOSHIBA AC adaptor that was provided with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
Page 46 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 47: Charging The Main Battery
AC power supply. Disconnect the AC power cord/cable and remove the main battery. “For more information on the TOSHIBA eco power plan, see the Help file in the TOSHIBA eco Utility™ window.” on page 113 information on replacing the main battery.
Page 48: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Facing the front of the computer, locate the center of the display panel.
Page 49: Turning On The Power
Turning on the power To turn on the computer: Make sure any external devices (such as the AC adaptor, if you plan to use AC power rather than battery power) are properly connected and ready. Check to ensure that all drives and slots are empty. Press and release the power button.
Page 50: Registering Your Computer With Toshiba
Product registration can be completed by either visiting the Toshiba Web site at register.toshiba.com, or by clicking Start, All Programs, TOSHIBA, Support & Recovery, and then Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty.
Page 51: Recovering The Internal Storage Drive
Recovering the Internal Storage Drive NOTE To purchase an optional external writable optical disc drive or a USB Flash drive, visit the Toshiba Web site at accessories.toshiba.com. Your computer includes recovery utilities to allow you to recover your internal storage drive if necessary.
Page 52: Recovering To Out-Of-Box State (Recommended Recovery Method)
AC adaptor. ❖ The Toshiba Recovery Wizard also provides the option of erasing your internal storage drive, without restoring the information on the drive. See more information.
Page 53 Click Yes to continue. (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen Getting Started key.
Page 54: Recovering Of Factory Default Software With User's Data
Using “Recovery of Factory Default Software with user’s data” recovers your internal storage drive to factory default state and attempts to save C:\Users data to C:\Backup. Toshiba does not guarantee successful data back-up. Please make a complete back up of your data to external media before executing the recovery. For...
Page 55 Make sure the computer is turned off. While powering on your computer, press the initial TOSHIBA screen displays. The Boot menu appears. Using the arrow keys to scroll down, select the HDD Recovery option, and then press the If your system offers a choice of Windows operating system, select one at this time.
Page 56 Wizard will “attempt” to save all data. There is a risk that the Toshiba Recovery Wizard may not be able to save all data during the recovery process. Toshiba does not guarantee successful data back up. Be sure to save your work to external media before executing the recovery (see “Backing up your work”...
Page 57: Recovering Without Changing The Internal Storage Drive Partitions
When the recovery process is complete, the “Recovery of Factory Default Software” screen appears, indicating that the recovery process is complete. Click Finish to restart the computer. (Sample Image) Recovery of Factory Default Software - Recovery complete Recovering without changing the internal storage drive partitions Recovering without changing the internal storage drive partitions deletes all information stored on the C: drive.
Page 58 To recover using the utilities on your computer’s internal storage drive: Make sure the computer is turned off. While powering on your computer, press the initial TOSHIBA screen displays. The Boot menu appears. Using the arrow keys to scroll down, select the HDD Recovery option, and then press the If your system offers a choice of Windows operating system, select one at this time.
Page 59 Recovering the Internal Storage Drive When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen The Recovery of Factory Default Software screen appears.
Page 60: Recovering To A Custom Size Partition
Make sure the computer is turned off. While powering on your computer, press the initial TOSHIBA screen displays. The Boot menu appears. Using the arrow keys to scroll down, select the HDD Recovery option, and then press the If your system offers a choice of Windows operating system, select one at this time.
Page 61 Click Yes to continue. (Sample Image) Warning screen When the Toshiba Recovery Wizard opens and the Selecting a process screen displays, select Recovery of Factory Default Software and then click Next. (Sample Image) Selecting a Process screen...
Page 62: Creating Recovery Media
Creating recovery media NOTE To purchase an optional external writable optical disc drive for creating recovery DVDs, please visit the Toshiba Web site at accessories.toshiba.com. It is strongly recommended that you create recovery media. If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery media.
Page 63 DVDs or USB Flash drives. To create recovery media: Click Start, All Programs, TOSHIBA, Support & Recovery, and then Recovery Media Creator. The TOSHIBA Recovery Media Creator dialog box displays. (Sample Image) TOSHIBA Recovery Media Creator dialog box Select USB Flash or DVD from the drop-down list, depending on the type of external media you want to use.
Page 64 Click the Create button in the TOSHIBA Recovery Media Creator utility dialog box. Follow the on-screen prompts to complete the copy process.
Page 65: Restoring From Recovery Media
Restoring from recovery media The recovery process deletes information stored on the internal storage drive. Be sure to save your work to external media before executing the recovery (see NOTE During the internal storage drive recovery process it is strongly recommended that your computer be connected to an external power source via the AC adaptor.
Page 66 Click Yes to continue. When the Toshiba Recovery Wizard opens and the Selecting a Process screen displays, select Recovery of Factory Default Software and then click Next.
Page 67: Erasing The Internal Storage Drive
For more information, “Recovering the Internal Storage Drive” on page To delete all data and partitions from the internal storage drive: Access the Toshiba Recovery Wizard on your internal storage drive or on your recovery media. ❖...
Page 68 Getting Started Erasing the Internal Storage Drive Choose one of the following options on the Erase the hard disk screen: ❖ Delete all data and partitions from the hard disk—This option deletes all of the data on the internal storage drive without overwriting the drive.
Page 69: Checking The Internal Storage Drive Operating Status
Highlight the internal storage drive in the Volume list to display its status in the lower portion of the screen. Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer.
Page 70 Some of the following features may need to be enabled before they can be used. To enable the following features, click on the Mouse icon in the Optimize tab of Toshiba Assist. Click the Device Settings tab and then click Settings. Do the following:...
Page 71 Do the following: Select an item Move the pointer to the item you want to select. Do one of the following: ❖ ❖ Open or activate an Move the pointer to the item you want to open/activate. item Do one of the following: ❖...
Page 72 To stop scrolling, lift your finger off of the touch pad. To enable circular scrolling, click on the Mouse icon in the Optimize tab of Toshiba Assist. Click the Device Settings tab and then click on Settings. Double-click on and then double-click on Scrolling.
Page 73: Adjusting Touch Pad Settings
Mouse Properties option of the Windows Control Panel. For more information, please visit support.toshiba.com, and enter the phrase “Mouse pointer jumps around as you type” into the Search field. Disabling or enabling the touch pad The touch pad is enabled by default.
Page 74: Using External Display Devices
Getting Started Using external display devices NOTE Alternately, you can disable only the tapping feature. If you disable tapping only, you can still use the touch pad’s control buttons and move the pointer by sliding your finger on the touch pad. To disable tapping only, use the Mouse Properties option in the Windows Control Panel.
Page 75: Connecting An External Monitor Or Projector
Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: Read the directions that came with the monitor to see if you first need to install new software. Connect the monitor’s video cable to the RGB (monitor) port on the back of the computer.
Page 76: Adjusting The Quality Of The External Display
Getting Started Using an external keyboard ❖ Swap-Switch primary display between internal display and external monitor when using extended desktop (Sample Image) Display options window Release the Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings.
Page 77: Connecting A Printer
Connecting a printer NOTE Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly. Read the documentation that came with your printer.
Page 78: Setting Up A Printer
Getting Started Connecting a printer Setting up a printer NOTE Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time.
Page 79: Turning Off The Computer
Turning off the computer Pressing the power button before shutting down the Windows operating system could cause you to lose your work. Make sure the system indicator panel’s storage drive light and the drive in-use light are off. If you turn off the power while a disk/disc is being accessed, you may lose data or damage the disk/disc and/or drive.
Page 80 Getting Started Turning off the computer Factors to consider when choosing Hibernation: ❖ While in Hibernation mode, the computer uses no main battery power. ❖ Because the state of the system is stored to the internal storage drive, no data is lost if the main battery discharges. ❖...
Page 81: Using The Shut Down Command
❖ If the battery charge becomes critically low, the computer will try to enter Hibernation mode. If you power down using the Sleep command and the main battery discharges fully, your unsaved information will be lost. Be sure to save your work first. For information on using Sleep, see mode”...
Page 82 Getting Started Turning off the computer Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen Click Change advanced power settings. The Advanced settings tab of the Power Options window appears.
Page 83: Using And Configuring Hibernation Mode
NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power. ❖ Lid close action Set this option to Shut down if you want the computer to shut down when you close the display panel.
Page 84 Getting Started Turning off the computer Click Hibernate in the pop-up menu. The computer saves the state of all open programs and files, turns off the display, and then turns off. Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel.
Page 85 Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Hibernate for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power.
Page 86: Using And Configuring Sleep Mode
Getting Started Turning off the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows green. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Page 87 Click Change plan settings under the power plan to be customized. The Edit Plan Settings window appears. (Sample Image) Edit Plan Settings screen To change the amount of time after which the computer enters Sleep mode: ❖ Under Put the computer to sleep, select the desired amount of time in both the On battery and Plugged in categories.
Page 88 Getting Started Turning off the computer Double-click Power buttons and lid to display the actions that you can configure. (Sample Image) Advanced settings tab of Power Options screen Select Sleep for the options you want. NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power.
Page 89: Closing The Display Panel
If you place the computer in Sleep mode by closing the display panel, you can start it again by opening the display panel. Closing the display panel After you have turned off the computer, close the display panel to keep dust and dirt out of the computer. Customizing your computer’s settings There are several ways in which you can customize your computer to suit your particular requirements.
Page 90: Using A Computer Lock
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 91: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 92: Using The Keyboard
Learning the Basics Using the keyboard ❖ Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 93: Character Keys
Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page. ❖ The lowercase letter l (el) and the number 1 are not interchangeable.
Page 94: Special Windows ® Keys
Learning the Basics Using the keyboard through programmed functions when pressed. Used in combination with the key, function keys marked with icons execute specific functions on the computer. For example, For more information, see ® Special Windows keys (Sample Illustration) Special Windows Your computer’s keyboard has one key and one button that have special functions in Windows ❖...
Page 95: Backlit Keyboard
Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press The numeric overlay light glows when the numeric overlay is on. To disable the numeric overlay, hold down the again.
Page 96: Starting A Program From The Start Menu
Learning the Basics Starting a program Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu. To start a program that has an icon in the All Programs menu, follow these steps, which use the ®...
Page 97: Starting A Program Using The Search Programs And Files Field
In the right part of the window, double-click the folder containing the program, in this case Program Files. Windows folder on the right side of the window. In the right part of the window, double-click Windows NT. In the right part of the window, double-click Accessories. Windows folder on the right side of the window.
Page 98: Saving Your Work
Learning the Basics Saving your work Saving your work Before you turn off the computer using the Shut down command, save your work on the internal storage drive, external media, flash media, or optical disc. This is one of the most important rules of computing.
Page 99: Printing Your Work
File names The Windows contain up to 260 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters. You may use all the letters, numbers, and other characters on the keyboard, except for these characters: \ / ? : * "...
Page 100: Backing Up Your Work
Learning the Basics Backing up your work Click on the arrow in the upper-left corner of your Windows and then click Print. The program displays a Print dialog box. (Sample Image) Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print.
Page 101: Restoring Your Work
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 102: Chapter 3: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you...
Page 103: Running The Computer On Battery Power
EasyGuard Optimize—to enable users to customize system settings to be more productive. *Toshiba EasyGuard some of which may or may not be available on a particular Toshiba computer depending on the model selected. See easyguard.toshiba.com Running the computer on battery power The computer contains a Lithium-Ion (Li-Ion) battery that provides power when you are away from an AC outlet.
Page 104 Mobile Computing Running the computer on battery power Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power. After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced.
Page 105: Power Management
Customer Support Center. Charging batteries The battery needs to be charged before you can use it to power the computer. Always use the AC adaptor specified by Toshiba. You can order a Toshiba AC adaptor from Toshiba’s Web site at accessories.toshiba.com. NOTE Battery charge time may vary depending on the applications, power management settings, and features used.
Page 106: Charging The Rtc Battery
Mobile Computing Charging batteries HINT: Once the battery is fully charged, we recommend that you operate your computer on battery power until the battery discharges completely. Doing this extends battery life and helps ensure accurate monitoring of battery capacity. Charging the RTC battery Your computer has an internal real-time clock (RTC) battery.
Page 107: Monitoring Main Battery Power
Monitoring main battery power The computer’s main battery light gives you an indication of the main battery’s current charge. ❖ Glows amber while the main battery is being charged (AC adaptor connected) ❖ Glows green when the main battery is fully charged ❖...
Page 108 Mobile Computing Monitoring main battery power HINT: Be careful not to confuse the battery light ( light ( the keyboard). When the ON/OFF light or power button light flashes amber, it indicates that the system is suspended (using the Windows operating system Sleep command).
Page 109: Determining Remaining Battery Power
Determining remaining battery power NOTE Wait a few moments after turning on the computer before trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations. Move the pointer over the power icon in the notification area, see “Finding your way around the desktop”...
Page 110: Setting Battery Notifications
Mobile Computing Monitoring main battery power Setting battery notifications You can set two notifications. Each notification can be set to alert you when a specified percentage of remaining battery power has been reached. You can also set the computer to enter Sleep mode or Hibernation mode or to completely power down when the notification goes off.
Page 111: Power Plans
❖ How much you use the internal storage drive or other optional devices ❖ Where you are working, since operating time decreases at low temperatures There are various ways in which you can conserve power and extend the operating time of your battery: ❖...
Page 112: Using A Hot Key To Set The Power Plan
Mobile Computing Monitoring main battery power Select an appropriate plan for your work environment or create your own custom plan. Click Create a power plan in the left pane to set up a new plan. NOTE To edit a plan or to edit advanced settings, continue to the following steps.
Page 113: Using The Toshiba Eco Power Plan
For example, when this power plan is enabled, the brightness of the display is reduced and the interval before Sleep mode takes effect is shortened. To enable or disable the TOSHIBA eco power plan, press the eco Utility™ button.
Page 114: Changing The Main Battery
If you find that a new battery is needed, contact the location you purchased the computer at for more information on replacing the battery. Toshiba will not be responsible for any product damage, data loss, service or part replacement made necessary by improper installation of a new battery.
Page 115: Maintaining Your Battery
Maintaining your battery Fully discharging your battery will allow better accuracy of the battery meter. To fully discharge your battery: ❖ Periodically, disconnect the computer from a power source and operate it on battery power until the battery fully discharges. Before doing so, follow the steps below: Turn off the computer’s power.
Page 116: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 117: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows operating system. You can use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 118: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, notification area, and background pattern. Icons Start button (Sample Image) Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 119 ❖ TECHNICAL NOTE: If you delete a large number of files or very large files from the internal storage drive, there may be insufficient space available in the Recycle Bin to hold these files. In this case, Windows delete the file(s) or cancel the deletion. ❖...
Page 120: Setting Up For Communications
For information on how to set up a wireless connection, refer to your wireless networking device documentation or your network administrator. NOTE To enable or disable wireless communication, use the Hot Key Fn + F8 page 181. . For more information see ® /LAN, etc.) “Hot Keys/TOSHIBA Cards” on...
Page 121: Connecting Your Computer To A Network
NOTE When the Wireless antenna is ON, the wireless indicator light be lit. For help with common Wi-Fi networking problems” on page Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. Accessing a network To access a network, connect an Ethernet cable to the Network port (RJ45) on your computer.
Page 122: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Click Start, All Programs, Accessories, and then Sound Recorder. (Sample Image) Sound Recorder screen Click the Start Recording button. Speak normally into the microphone. When you have finished recording, click the Stop Recording button.
Page 123: Using The Web Camera
Depending on your computer model, the process of sending email, taking pictures or recording video messages may vary. To access the Web Camera, click Start, All Programs, TOSHIBA, Media & Entertainment, and then select the Web Camera Application. The Web Camera indicator light glows when the Web Camera is active.
Page 124: Inserting Memory Media
Exploring Your Computer’s Features Using the Memory card reader Inserting memory media The following instructions apply to all types of supported media devices. Turn the media so that the contacts (metal areas) are face down. NOTE You may first need to remove the card slot protector before you can insert a card.
Page 125 Exploring Your Computer’s Features Grasp the card and pull it straight out. (Sample Illustration) Removing memory media Do not remove memory media while data is being written or read. Even when the Windows to the media might still be in progress and your data could be destroyed.
Page 126: Chapter 5: Utilities
❖ TOSHIBA Assist ❖ TOSHIBA Application Installer ❖ Supervisor password ❖ User password ❖ TOSHIBA Face Recognition Utility ❖ TOSHIBA Security Assist ❖ TOSHIBA PC Diagnostic Tool Utility ❖ Mouse Utility ❖ TOSHIBA Hardware Setup ❖ TOSHIBA Sleep Utility...
Page 127: Toshiba Assist
❖ TOSHIBA PC Health Monitor TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, click Start, All Programs, TOSHIBA, Support & Recovery, and then TOSHIBA Assist.
Page 128: Connect
Utilities TOSHIBA Assist Connect The features available in this category are: ❖ Bluetooth ❖ Bluetooth (Sample Image) TOSHIBA Assist window – Connect tab ® Settings ® Local COM Settings...
Page 129: Secure
Secure The features available in this category are: ❖ Supervisor password ❖ User password ❖ TOSHIBA Security Assist (Sample Image) TOSHIBA Assist window – Secure tab Utilities TOSHIBA Assist...
Page 130: Protect & Fix
Utilities TOSHIBA Assist Protect & Fix The feature available in this category is: ❖ TOSHIBA PC Diagnostic Tool Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 131: Optimize
❖ Mouse Utility ❖ TOSHIBA Hardware Setup ❖ TOSHIBA Button Support ❖ TOSHIBA Accessibility ❖ TOSHIBA Face Recognition Utility ❖ TOSHIBA Sleep Utility ❖ TOSHIBA eco Utility™ (Sample Image) TOSHIBA Assist window – Optimize tab Utilities TOSHIBA Assist (Hardware Settings)
Page 132: Toshiba Recovery Media Creator
TOSHIBA Recovery Media Creator TOSHIBA Recovery Media Creator The TOSHIBA Recovery Media Creator utility enables you to create recovery media that can be used to return your system to its out-of-box state, if necessary. For detailed information on using the...
Page 133: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. TOSHIBA supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily.
Page 134: Using A Supervisor Password
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 135: Using A User Password
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 136 Click OK to exit. Deleting a user password To cancel the power-on password function: Click Start, All Programs, TOSHIBA, Support & Recovery, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 137: Toshiba Face Recognition Utility
TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
Page 138: Toshiba Security Assist
TOSHIBA Security Assist TOSHIBA Security Assist The TOSHIBA Security Assist Utility acts as a “command center” where you can set up various passwords or other security features, and see how these features can be used with each other to increase security even further, or to simplify the ways that you protect your system.
Page 139 (available on certain models). ❖ Wireless Key Logon: Configure your computer to allow a ® Bluetooth -compatible cell phone to send an unlock code. Utilities TOSHIBA Security Assist ® accounts on this ® account password, ® screen saver. ®...
Page 140: Toshiba Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. NOTE The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem. To use the TOSHIBA PC Diagnostic Tool utility: Click Start, All Programs, TOSHIBA, Support &...
Page 141: Mouse Utility
The settings you can change are divided into these categories: ❖ Buttons ❖ Pointers ❖ Pointer Options ❖ Wheel ❖ Hardware ❖ Device Settings You may see additional categories depending on your particular pointing device. Adjust the settings as desired, then click OK. Utilities Mouse Utility TOSHIBA Assist.
Page 142: Toshiba Hardware Setup
TOSHIBA Hardware Setup is the TOSHIBA configuration management tool available through the Windows system. To access it: ❖ Click Start, All Programs, TOSHIBA, Tools & Utilities, and then HWSetup, or click the TOSHIBA Hardware Settings icon in the Optimize tab of The TOSHIBA HWSetup screen appears.
Page 143 USB—Allows you to enable or disable USB Legacy Emulation ❖ USB Memory Bios Support Type—Interprets the way the system sees the USB flash drive. ❖ HDD—Hard Disk Drive ❖ FDD—Floppy Disk Drive Utilities TOSHIBA Hardware Setup . For more information, see Fn + F5 “Directing the...
Page 144: Toshiba Sleep Utility
“USB Sleep and Charge function.” It also displays the remaining battery capacity. Starting the TOSHIBA Sleep Utility To start this utility, click Start, All Programs, TOSHIBA, Tools & Utilities, and then Sleep Utility. USB Sleep and Charge Your computer can supply USB bus power (DC 5V) to the USB port even when the computer is in Sleep mode, Hibernation mode or shutdown state (powered off).
Page 145 Metal paper clips or hair pins/clips will generate heat if they come into contact with USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. Utilities TOSHIBA Sleep Utility...
Page 146: Enabling/Disabling Usb Sleep And Charge
Mode, which is the default mode, will charge a wide variety of digital audio players. If your device does not charge in Auto Mode, try using Alternate Mode. To select a different charging mode, use the Power supply mode drop-down list in the utility. (Sample Image) TOSHIBA Sleep Utility screen...
Page 147: Toshiba Button Support
USB Sleep and Charge in the utility and turn the computer on to charge the device, or use a different charging device. TOSHIBA Button Support TOSHIBA Button Support allows you to customize the eco button. This button is located on the system control panel directly above the keyboard.
Page 148: Toshiba Accessibility
Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the press it once, release it, and then press a function key to activate the hot key function.
Page 149: Trusted Platform Module (Tpm)
Trusted Platform Module (TPM) NOTE This section only applies to systems with TPM. Your TOSHIBA computer includes the TPM (Trusted Platform Module), which is a security encryption device for your system’s internal storage drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures.
Page 150: Fingerprint Authentication Utility
TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 151: Fingerprint Logon
Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved and associated with the user’s Windows user attempts to log on again, the user’s fingerprint is read and compared with the user’s enrolled fingerprints; if the fingerprint is recognized, user logon is completed.
Page 152 Utilities Fingerprint Authentication Utility ❖ Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. ❖ Soaked or swollen finger (e.g., after taking bath) ❖...
Page 153: Fingerprint Reader Limitations
TOSHIBA does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 154: Toshiba Eco Utility
The TOSHIBA eco Utility™ monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To access the TOSHIBA eco Utility™, do one of the following: ❖ Click Start, All Programs, TOSHIBA, Tools & Utilities, and then TOSHIBA eco Utility.
Page 155: Toshiba Wireless Lan Indicator
TOSHIBA wireless LAN indicator TOSHIBA wireless LAN indicator (Available on certain models.) The TOSHIBA wireless LAN indicator allows you to view the networks you are currently connected to. To access the list of connected networks, before logging in, click on the TOSHIBA wireless LAN indicator icon located on the upper right side of the logon screen.
Page 156: Toshiba Service Station
This information is used to identify and provide a notification of system conditions that may affect the performance of your TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers.
Page 157 Utilities TOSHIBA PC Health Monitor You may disable the TOSHIBA PC Health Monitor at any time by ® uninstalling the software via the Windows Control Panel. Doing so will automatically delete all collected information from the internal storage drive. The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its standard limited warranty in any way.
Page 158: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 159: Problems When You Turn On The Computer
Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 160 If Something Goes Wrong Problems when you turn on the computer The computer displays the Recovery – Windows did not shut down successfully To continue, select Start Windows normally. This can happen if the computer was put into Sleep mode and the battery has discharged.
Page 161: The Windows Operating System Is Not Working
The output specifications of the AC adaptor must match the input specifications of the computer. If the specifications do not match, locate and use the AC adaptor that shipped with your computer. If the specifications do match, contact Toshiba. See page 178. ®...
Page 162: Internet Problems
If Something Goes Wrong The Windows ❖ Safe Mode with Networking ❖ Safe Mode with Command Prompt ❖ Enable Boot Logging ❖ Enable low-resolution video (640 x 480) ❖ Last Known Good Configuration (advanced) ❖ Directory Services Restore Mode ❖ Debugging Mode ❖...
Page 163: The Windows Operating System Can Help You
Click one of the options listed in the window and then follow the on-screen instructions. You can connect to Support Online by clicking the Ask button and then clicking Microsoft Customer Support or by going to Toshiba support at support.toshiba.com. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
Page 164: Memory Problems
Your computer has two memory module slots. Both slots are located under the keyboard and should only be accessed by a Toshiba authorized service provider. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
Page 165 If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance. The AC adaptor and power cord/cable work correctly, but the battery will not charge. The battery does not charge while the computer is consuming full power.
Page 166: Keyboard Problems
If Something Goes Wrong Keyboard problems Keyboard problems If, while typing, strange things happen or nothing happens, the problem may be related to the keyboard itself. The keyboard produces unexpected characters. A keypad overlay may be on. If the numlock light or cursor control overlay light is on, press overlay light, or If the problem occurs when both the keypad overlays are off, make...
Page 167 If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. ❖ Check that the cable connecting the external monitor to the computer is firmly attached.
Page 168: Disk Or Storage Drive Problems
If Something Goes Wrong Disk or storage drive problems Small bright dots appear on your TFT display when you turn on your computer. Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology.
Page 169: Sound System Problems
Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter. After it opens, click Defragment disk.
Page 170: Wireless Networking Problems
SSID assigned to the ® Control Panel's Device Manager to verify ® adapter is recognized by the Windows these will be very helpful if you should confer with . For more information see ® ) networking. ® adapter, ® “Hot Keys/TOSHIBA Cards” on...
Page 171 ❖ Use IPCONFIG to verify that the computer has a useful IP address one other than the private address of 169.254.xxx.xxx assigned by Windows Click Start to open the Start menu. Type Enter IPCONFIG /ALL The IP address for each active network adapter will be displayed.
Page 172: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 173: Data And System Configuration Backup
Data and system configuration backup in the Windows system The Windows for backing up your Windows and other important files. Take advantage of these features to protect yourself from much more difficult and time-consuming restoration procedures, and to safeguard your valuable data from loss.
Page 174 If Something Goes Wrong Develop good computing habits Then, at a later time, you can re-establish your Windows configuration using the saved restore point. To do this: Click Start, All Programs, Accessories, System Tools, and then System Restore. Select Recommended restore or Choose a different restore point, and then click Next.
Page 175 Follow these steps to back up your computer or files to optical discs, or a storage drive: NOTE You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing. Prepare your backup target by connecting it and/or inserting a blank optical disc in the drive.
Page 176 If you are attempting to charge a device without an AC adaptor connected to the computer, the computer's battery power may be below the limit specified in the TOSHIBA Sleep Utility or the battery may be depleted. Lower the limit in the TOSHIBA...
Page 177: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 178: Contacting Toshiba
Toshiba’s Technical Support Web site For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at support.toshiba.com. Toshiba voice contact Before calling Toshiba, make sure you have: ❖...
Page 179: Toshiba's Worldwide Offices
Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court...
Page 180 Toshiba’s worldwide offices United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany...
Page 181: Appendix A: Hot Keys/Toshiba Cards
Appendix A Hot Keys/TOSHIBA Cards Hot keys and TOSHIBA Cards provide a quick way to modify selected system functions and to launch applications. There are two types of TOSHIBA Cards: Hot Key Cards and Application Cards. Hot Key Cards The Hot Key Cards are used to set or modify the following system functions: ❖...
Page 182: Using The Hot Key Cards
To use the Hot Key Cards: Press and hold the The TOSHIBA Cards appear along the top of the screen. (Sample Image) Hot Key Card display Select the desired option. The selected Card is displayed full-size with its available options below it.
Page 183: Hot Key Functions
Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This TOSHIBA Card or hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones.
Page 184: Lock (Instant Security)
Hot Keys/TOSHIBA Cards Hot key functions Lock (Instant security) This TOSHIBA Card or hot key blanks the display. Selecting this Card or pressing the hot key displays the following options: Fn + (Sample Image) Security options ❖ ❖ hot key function activates instant security. The user...
Page 185: Power Plan
Hot Keys/TOSHIBA Cards Hot key functions Power plan This TOSHIBA Card or hot key displays the power plans and cycles through the power plans. The properties of each power plan, and the power plans that are displayed by this function, are set in the Power Options window.
Page 186: Sleep Mode
Hot Keys/TOSHIBA Cards Hot key functions Sleep mode This TOSHIBA Card or hot key places the computer into Sleep mode. For more information about Sleep mode, please see and configuring Sleep mode” on page Selecting this Card or pressing the hot key displays the...
Page 187: Hibernation Mode
Hibernation mode This TOSHIBA Card or hot key places the computer into Hibernation mode. If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Using and configuring Hibernation mode” on page Selecting this Card or pressing the hot key displays the...
Page 188: Output (Display Switch)
Hot Keys/TOSHIBA Cards Hot key functions Output (Display switch) This TOSHIBA Card or hot key cycles through the power-on display options (only the first option is available when you do not have an external monitor attached) (the last option is available only if you are in Extended Display Mode).
Page 189: Display Brightness
Built-in Display and TV). In extended desktop mode, the image is split into two sides, one side per display device. To swap sides, select Swap Image Display. Display brightness This TOSHIBA Card decreases or increases the screen brightness. This hot key decreases the screen brightness. Fn + This hot key increases the screen brightness.
Page 190: Disabling Or Enabling Wireless Devices
Hot Keys/TOSHIBA Cards Hot key functions Disabling or enabling wireless devices This TOSHIBA Card or hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖ ❖ Fn + ❖ ❖ ❖ Selecting this Card or pressing the hot key displays the...
Page 191: Disabling Or Enabling The Touch Pad
Disabling or enabling the touch pad This TOSHIBA Card or hot key enables/disables the touch pad. For more information on using the touch pad, see the touch pad” on page Selecting this Card or pressing the hot key displays the...
Page 192: Zoom (Display Resolution)
(Sample Image) Screen resolution options Cycle through the screen resolutions, then select the desired resolution. Cursor control overlay This TOSHIBA Card or hot key turns the cursor control overlay on and off. Selecting this Card or pressing the hot key displays the following options:...
Page 193: Numeric Overlay
Hot Keys/TOSHIBA Cards Hot key functions Numeric overlay This TOSHIBA Card or hot key turns the numeric overlay on and off. Selecting this Card or pressing the hot key displays the following options: Fn + (Sample Image) Numeric overlay...
Page 194: Keyboard Hot Key Functions
Hot Keys/TOSHIBA Cards Hot key functions Keyboard hot key functions Fn + This hot key turns the scroll lock feature on and off. This hot key allows you to zoom out. Fn + This hot key allows you to zoom in.
Page 195: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. UL approved United Kingdom BS approved Australia AS approved...
Page 196: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this User’s Guide. BIOS BD-ROM CD-ROM CD-RW CMOS COM1 COM2 Alternating Current Basic Input/Output System Blu-ray Disc Read-Only Memory bits per second Compact Disc Compact Disc Read-Only Memory...
Page 197 DIMM Dual Inline Memory Module Disk Operating System Dots Per Inch Digital Versatile (or Video) Disc DVD-ROM Digital Versatile (or Video) Disc Read-Only Memory EPROM Erasable Programmable Read-Only Memory eSATA external Serial Advanced Technology Attachment File Allocation Table Federal Communications Commission gigabyte Hard Disk Drive HDMI...
Page 198 Glossary SDRAM Terms The following terms may appear in this User’s Guide. active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 199 backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. Basic Input/Output System (BIOS)—See BIOS. baud rate—The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second).
Page 200 Glossary cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD—An individual compact disc. See also CD-ROM. CD-ROM (Compact Disc Read-Only Memory)—A form of high- capacity storage that uses laser optics instead of magnetic means for reading data.
Page 201 CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor—An on-screen symbol (usually a flashing vertical line) that indicates the position where characters will appear when you enter data.
Page 202 Glossary document—Any file created with an application and, if saved to disk, given a name by which it can be retrieved. See also file. double-click—To press and release the pointing device’s primary button rapidly twice without moving the pointing device. In the Windows operating system, this refers to the pointing device’s left button, unless otherwise stated.
Page 203 file—A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. File Allocation Table (FAT)—The section of a storage drive that keeps track of the location of stored files.
Page 204 HDMI cables. See also HDMI. Hibernation—A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 205 LAN (Local Area Network)—A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network. LED (Light Emitting Diode)—A solid state lamp (SSL) that uses light-emitting diodes (LEDs) as the source of light, which offers long life and high efficiency output.
Page 206 Glossary motherboard—The computer’s main circuit board that contains the processor, memory, and other primary components. MS-DOS prompt—See system prompt. multi-function drive—A DVD drive that can read and write to CD and DVD media. multimedia—A combination of two or more media, such as sound, animation, and video in a computer program or presentation.
Page 207 password—A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card—A credit-card-sized expansion card designed to increase the capabilities of computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter.
Page 208 Glossary Random Access Memory—See RAM. Read-Only Memory—See ROM. reboot—See boot, restart. removable disk—A disk that can be removed from a disk drive. A Flash drive is one example of a removable disk. resolution—A measure of the sharpness of the images that can be produced by a printer or displayed on a screen.
Page 209 shortcut—See keyboard shortcut. Sleep—A feature of some Windows to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. software—See program. Compare hardware. solid state drive —A data storage device that utilizes solid-state memory as opposed to a hard disk (see also hard disk).
Page 210 Glossary Web—See World Wide Web. ® Wi-Fi —A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www)—The worldwide network of Web sites linked together over the Internet.
Page 211: Index
105 power options 110 power plan 185 real-time clock (RTC) 104 recharge time 103 RTC memory 104 running computer on battery power 103 setting notifications 110 taking care of 114 battery indicator light 108 BIOS Setup see TOSHIBA Hardware Setup...
Page 212 Index button eco Utility™ 113 power 49 Shut down 81 start 119 caring for your computer 89 changing battery 114 character keys 93 charging the battery 47 cleaning the computer 89 communications set up 120 computer caring for 89 cleaning 89 environmental precautions 41 moving 89 restarting 83...
Page 213 emulate a full-size keyboard 93 enabling touch pad 73 ENERGY STAR® 36 exploring desktop 117 external devices keyboard 76 mouse 76 external display device HDMI™ Out port 74 RGB (monitor) port 74 external display, adjusting 76 file extensions using 99 files backing up 92 file names 99...
Page 214 121 connecting your computer 121 networking wireless 120 notification area 120 ON/OFF indicator light 108 online resources Toshiba 101 optional external devices adding 50 other documentation 40 password deleting a supervisor 135 deleting a user 136 instant password 133...
Page 215 42 printer connecting 77 setting up 78 USB-compatible 77 printing a file 99 problem solving contacting Toshiba 178 Startup options 161 program, starting 95 program, starting from Start menu 96 projector connecting 75 real-time clock (RTC) battery 104...
Page 216 Optimize tab 131 Protect & Fix tab 130 Secure tab 129 TOSHIBA Button Support 147 Toshiba EasyGuard® 103 TOSHIBA eco power plan 113 TOSHIBA eco Utility™ 154 TOSHIBA Face Recognition Utility TOSHIBA Hardware Setup 142 TOSHIBA PC Diagnostic Tool Utility...
Page 217 112 Memory card reader 123 Shut down command 81 Sleep mode 86 TOSHIBA eco power plan 113 touch pad 69 Web Camera 123 using the keyboard 92 using the overlay for cursor control 95...
Page 218 Index Windows® operating system desktop 117 troubleshooting 161 Windows® Start menu starting a program 96 wireless networking 120 troubleshooting 170...

This manual is also suitable for:

Z830-s8301 Z830-s8302 Z830-sp3245l Z830-sp3245sl Z835-p330 Z835-p360 ... Show all

Toshiba Z830-BT8300 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys/Toshiba Cards

Appendix B: Power Cord/Cable Connectors

Quick Links

Related Manuals for Toshiba Z830-BT8300

Summary of Contents for Toshiba Z830-BT8300

This manual is also suitable for:

Table of Contents