hit counter script
Sony DVP-CX875P Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. DVP-CX875P
  6. Service manual
Sony DVP-CX875P Service Manual

Sony DVP-CX875P Service Manual

Hide thumbs Also See for DVP-CX875P:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
System
Laser: Semiconductor laser
Signal format system: NTSC
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(AUDIO OUTPUT L/R 1/2 jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
When you play PCM sound tracks with a
96 kHz sampling frequency, the output
signals from the DIGITAL OUTPUT
(COAXIAL or OPTICAL) jack are converted
to 48 kHz sampling frequency.
DVP-CX875P
SPECIFICATIONS
Outputs
(Jack name: Jack type/Output level/Load
impedance)
AUDIO OUTPUT L/R 1/2: Phono jack/
2 Vrms/10 kilohms
DIGITAL OUTPUT (OPTICAL): Optical
output jack/–18 dBm (wave length:
660 nm)
DIGITAL OUTPUT (COAXIAL): Phono
jack/0.5 Vp-p/75 ohms
COMPONENT VIDEO OUTPUT (Y, P
P
): Phono jack/Y: 1.0 Vp-p/P
R
interlace = 0.648 Vp-p, progressive =
0.7 Vp-p/75 ohms
VIDEO OUTPUT 1/2: Phono jack/
1.0 Vp-p/75 ohms
S VIDEO OUPUT 1/2: 4-pin mini DIN/
Y: 1.0 Vp-p/C: 0.286 Vp-p /75 ohms
S-LINK (CONTROL S IN): Mini jack
Canadian Model
General
Power requirements:
120 V AC, 60 Hz
Power consumption: 17 W
Dimensions (approx.): 430 × 158 × 415 mm
(17 × 6
1
× 16
/
4
depth) incl. projecting parts
Mass (approx.): 6.9 kg (15 lb 3 oz)
Operating temperature: 5 °C to 35 °C
(41
°
F to 95
°
F)
,
Operating humidity: 25 % to 80 %
B
, P
:
B
R
Supplied accessories
Check that you have the following items:
• Audio/video cord (pinplug × 3 y pinplug
× 3) (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Specifications and design are subject to
change without notice.
E
S
NERGY
TAR
R
E
S
As an
NERGY
Corporation has determined that this product
E
meets the
NERGY
energy efficiency.
CD/DVD PLAYER
RMT-D149A
US Model
3
in.) (width/height/
/
8
is a U.S. registered mark.
TAR
R
Partner, Sony
S
TAR
R
guidelines for

Advertisement

Table of Contents
loading

Related Manuals for Sony DVP-CX875P

Summary of Contents for Sony DVP-CX875P

  • Page 1 DVP-CX875P RMT-D149A SERVICE MANUAL US Model Canadian Model SPECIFICATIONS System Outputs General Laser: Semiconductor laser (Jack name: Jack type/Output level/Load Power requirements: Signal format system: NTSC impedance) 120 V AC, 60 Hz Power consumption: 17 W AUDIO OUTPUT L/R 1/2: Phono jack/...
  • Page 2 OPERATION. REPLACE THESE COMPONENTS WITH DE FONCTIONNEMENT. NE REMPLACER CES COM- SONY PARTS WHOSE PART NUMBERS APPEAR AS POSANTS QUE PAR DES PIÈCES SONY DONT LES SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- NUMÉROS SONT DONNÉS DANS CE MANUEL OU LISHED BY SONY.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Section Title Page Section Title Page Service Note ................5 AI-25 Printed Wiring Board ........... 4-33 AI-25 (LOADING/TURN TABLE/DOOR MOTOR GENERAL DRIVE, INTERFACE) Schematic Diagram ....4-35 VD-33 Printed Wiring Board .......... 4-37 VD-33 (VIDEO BUFFER) Schematic Diagram ..... 4-39 Precautions ..............
  • Page 4 Section Title Page Checking Component Video Output Y ......7-3 Checking Component Video Output B-Y ...... 7-3 Checking Component Video Output R-Y ...... 7-3 7-3. Adjustment Related Parts Arrangement ....... 7-6 REPAIR PARTS LIST 8-1. Exploded Views ............. 8-1 8-1-1. Case Assembly ............8-1 8-1-2.

  • Page 5: Service Note

    SERVICE NOTE 1. DISASSEMBLY • This set can be disassembled in the order shown below. Upper Case (Page 2-1) Front Panel Block Power Block Removal (Page 2-1) (Page 2-1) Mechanical Deck Assembly (Page 2-1) Center Guide AV-66 Board VD-33 Board MB-107 board T Driving Block Assembly...
  • Page 6 2. CONNECTION OF MB-107 BOARD JIG VD-33 AV-66 MB-107 AI-25 J-6090-125-A (29 pin FFC 400 mm) (for MB-107 SIDE B) – 6 –...

  • Page 7: General

    In this concerning your player, please consult your case, remove the disc and leave the player nearest Sony dealer. turned on for about half an hour until the moisture evaporates. • When you move the player, take out any discs.

  • Page 8: Index To Parts And Controls

    Front panel display Index to Parts and Controls When playing back a DVD VIDEO/DVD-RW For more information, refer to the pages indicated in parentheses. Lights up when the player outputs progressive signals (91) Front panel Current play All discs mode (45) mode (45) Lights up when you can Disc type...

  • Page 9: Simple Start Guide

    List of Control Menu Items Guide to the Control Menu Display Item Item Name, Function, Relevant Disc Type Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows: DISC (page 63) Selects the disc to be played.
  • Page 10 • To play discs in the other slots, see “Inserting Discs” on page 32 and “Playing Discs” on Front cover page 33. • If you use a Sony 8cm CD adaptor (not supplied), you can play 8cm (3-inch) CDs with the EASY PLAY slot. Note Do not insert an empty 8 cm (3-inch) CD adaptor.

  • Page 11: Hookups

    TVS WIDE (page 73) is recommended that you switches the connection to the standard definition output. If there are questions regarding your Sony TV set’s compatibility with this model 480p DVD player, please contact our customer service center. Stereo amplifier (receiver) and two speakers (page 26) Example •...
  • Page 12 Connecting to your TV Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck This connection will use your TV speakers for sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use .
  • Page 13 Refer to page 88 for using the Setup Display. The DISC CHANGE indicator lights up. disc slot number will be skipped. • If you use a Sony 8 cm CD adaptor (not supplied), Turn the .–/>+ dial until you Audio Connection (pages 25 to 28)

  • Page 14: Playing Discs

    Press H. Removing discs • Do not play DTS sound tracks without first Playing Discs connecting the player to an audio The player starts playing the selected component having a built-in DTS decoder. disc. Adjust the volume on the TV or the The player outputs the DTS signal via the amplifier (receiver).
  • Page 15 To return to side A Locating a point quickly by Playing one frame at a time Searching for a Press FLIP again. playing a disc in fast forward or (Freeze Frame) Particular Point on a z Hints fast reverse (Scan) •...
  • Page 16 Press X/x to select the setting. z Hint To play without using PBC, press ./> while Selecting “ORIGINAL” or Playing VIDEO CDs with • PLAY LIST: plays the titles created the player is stopped to select a track, then press H from “ORIGINAL.”...
  • Page 17 Press X/x to select Notes Creating your own program Various Play Mode (ONE/ALL DISCS) and press • Depending on the software you use to create the (Program Play) ENTER. Functions DATA CD, the playback order may differ from (Program Play, The options for “ONE/ALL DISCS”...

  • Page 18: Searching For And Managing Discs (Disc Explorer)

    Press X/x to select the item to be ◆ When playing a DVD-RW Playing repeatedly (Repeat Play) Repeating a specific portion (A- shuffled. • DISC: repeats all of the titles on the B Repeat Play) selected type in One Disc mode, or all ◆...
  • Page 19 ◆ Jacket picture Disc Explorer display Select the disc by one of the following Searching for a disc on the Disc The jacket picture recorded on the disc operations. Disc slot Explorer appears automatically. If there is no picture, • press number Current you can capture one from the disc (page 55).
  • Page 20 z Hints Press CLEAR. Labeling a disc or folder • You can sort the discs by genre or text Labeling Discs and The disc disappears from the folder. information. The discs are listed first by slot disappears from the Disc FILE Select the disc or folder you want to Folders...

  • Page 21: Searching For A Scene

    After sliding the TV/DISC Press ENTER. Sorting Discs (Sort Mode) EXPLORER/DVD switch to DISC SORT disappears from the Disc Explorer. EXPLORER, press SORT. Action Skiing the World Then the discs are sorted and re- The selected disc only is highlighted and displayed.

  • Page 22: Viewing Information About The Disc

    Press ENTER. Dividing a scene into 9 sections Setting and selecting a favorite (STROBE PLAYBACK) scene (Bookmark) To return to normal play You can display 9 consecutive moving You can have the player store specific Press O RETURN. pictures on the screen. portions of the disc in memory and play them immediately whenever you want z Hint...

  • Page 23: Sound Adjustments

    Currently playing program format** or more times, the DVD VIDEO is audio formats (PCM, Dolby Digital, or DTS), TVS was developed by Sony to produce recorded in multiple audio formats. you can change the audio format. If the DVD surround sound for home use using just a * “PCM,”...

  • Page 24: Enjoying Movies

    ◆TVS STANDARD To cancel the setting Note Creates virtual rear speakers from the sound Select “OFF” in Step 2. of the front speakers (L, R) without using Depending on the DVD VIDEO, you may not be Enjoying Movies ◆TVS DYNAMIC able to change the angles even if multi-angles are actual rear speakers.

  • Page 25: Using Various Additional Functions

    Press C/c to adjust the picture Press PICTURE MODE repeatedly Adjusting the Playback Enhancing the Playback contrast, then press ENTER. to select the setting you want. The adjustment is saved, and Picture Picture The default setting is underlined. (CUSTOM PICTURE MODE) (DIGITAL VIDEO “BRIGHTNESS”...
  • Page 26 Press X/x to select “PLAYER t,” Enter or re-enter your 4-digit password Parental Control (limited using the number buttons, then press then press ENTER. playback) ENTER. PARENTAL CONTROL ◆ If you have not entered a password LEVEL: “Custom parental control is set.” appears The display for registering a new STANDARD: Playback of some DVD VIDEOs can be...

  • Page 27: Settings And Adjustments

    TV using some of the Centurion Portland WIDE MODE Switch to or from the wide buttons below. mode of a Sony’s wide TV Coronado Proscan • If you enter a new code number, the code number TV/VIDEO Switch the TV’s input source...
  • Page 28 Select a setting using X/x, then Note Setting the Display or Settings for the Display press ENTER. Depending on the DVD, “4:3 LETTER BOX” may Sound Track Language The setting is selected and setup is (SCREEN SETUP) be selected automatically instead of “4:3 PAN SCAN”...

  • Page 29: Additional Information

    Should , The aspect ratio of the disc is fixed on your any problem persist, consult your nearest DVD. Sony dealer. Sound Power There is no sound. The power is not turned on. , Re-connect the connecting cord securely.
  • Page 30 E XX To prevent a malfunction, the may contain copy protection signals, such 40). , Contact your Sony dealer or local (xx is a number) player has performed the as complete copy protection signals, single , Multilingual tracks are not recorded on the authorized Sony service facility.
  • Page 31 Language Code List For details, see pages 71, 75, 89. The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona 1032 Afrikaans...

  • Page 32: Disassembly

    DVP-CX875P SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE REMOVAL 2-3. POWER BLOCK REMOVAL 3 Three screws 7 Two screws (+BV3 × 8) (tapping) 2 Two screws (tapping) 8 Power block 3 Two screws (+BV3 ×...

  • Page 33: Board Removal

    2-5. AV-66 BOARD REMOVAL 2-7. MB-107 BOARD REMOVAL 4 AV-66 board 3 Flexible flat cable 2 Flexible flat cable (CN601) (CN501) 1 Flexible flat cable 4 Connector (CN101) (CN201) 3 Three screws (+BV3 × 10) 1 Flexible flat cable 6 MB-107 board (CN103) 5 Six screws (+BV3 ×...

  • Page 34: Board Removal

    2-9. AI-25 BOARD REMOVAL 2-11. MECHANISM DECK BLOCK REMOVAL 1 Four screws 2 Mechanism deck block (+BVTP3 × 8) 2 AI-25 board CN001 CN002 1 Two screws (+BV3 × 10) 2-10. CENTER GUIDE ASSEMBLY REMOVAL 2-12. OPTICAL PICK-UP REMOVAL 2 Screw (+BV3 ×...

  • Page 35: Circuit Boards Location

    2-13. CIRCUIT BOARDS LOCATION LL-12 (LOADING GUIDE INDICATOR L) TK-63 (RELAY) LS-62 ZSSR113M (LOADING SENSOR) (SWITCHING REGULATOR) CK-118 LC-78 (DISC SENSOR) (LOADING/CHUCKING MOTOR) AV-66 LR-17 (AUDIO AMP) (LOADING GUIDE INDICATOR L) VD-33 (VIDEO BUFFER) FR-189 AI-25 (INTERFACE CONTROL) (LOADING/TURN TABLE/ DOOR MOTOR DRIVE, CS-58 INTERFACE)

  • Page 36: Block Diagrams

    DVP-CX875P SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM VD-33 BOARD (SEE PAGE 4-39) J102 MB-107 BOARD IC603 Y, Cb, Cr (SEE PAGE 4-13 to 4-32) BASE UNIT COMPONENT 16M SDRAM VIDEO OUT KHM-270AAA/ IC602 IC404, 405 SERVICE ASSY IC303...

  • Page 37: Rf/Servo Block Diagram

    DVP-CX875P 3-2. RF/SERVO BLOCK DIAGRAM IC201 tl (DVD play) IC201 tl (CD play) IC201 2 (DVD play) IC201 2 (CD play) IC201 rs (DVD play) IC201 rs (CD play) 200 mV/DIV 200 ns/DIV 500 mV/DIV 50 ns/DIV 500 mV/DIV 200 ns/DIV...

  • Page 38: Signal Processor Block Diagram

    DVP-CX875P 3-3. SIGNAL PROCESSOR BLOCK DIAGRAM MB-107 BOARD (2/6) (SEE PAGE 4-15 to 4-17) IC404, 405 16M SDRAM IC303 16M DRAM TDIKT NAND FLASH/ TDIGA 300 CHG MECHA CONTROL (SEE PAGE 3-13) XFRRST IC301 <zzz (DVD play) 122 124 125...

  • Page 39: System Control Block Diagram

    DVP-CX875P 3-4. SYSTEM CONTROL BLOCK DIAGRAM MB-107 BOARD (3/6) (SEE PAGE 4-21, 23) IC106 IC107 32M FLASH 1 – 5 18 – 21 HA 0 – 21 HA 0 – 21 HA 1 – 16 A 0 – 15 24 – 27 42 – 44 7 –...

  • Page 40: Video Block Diagram

    DVP-CX875P 3-5. VIDEO BLOCK DIAGRAM MB-107 BOARD (4/6) (SEE PAGE 4-25, 27) IC602 <z/c 1.6 Vp-p (66 MHz) VD-33 BOARD IC102 ed (SEE PAGE 4-39) MCLK IC102 J101 DVD 0 – 7 DVD 0 – 7 ı PI 2 – 9...

  • Page 41: Audio Block Diagram

    DVP-CX875P 3-6. AUDIO BLOCK DIAGRAM MB-107 BOARD (5/6) AV-66 BOARD IC203 (SEE PAGE 4-29) (SEE PAGE 4-43) 1 D IN OPTICAL DIGITAL CN501 CN201 J201 SPDIF Q212 SPDIF1 COAXIAL BUFFER IC202 SIGNAL PROCESSOR IC503 LINE OUT ACH12 SDTI (SEE PAGE 3-6)

  • Page 42: Nand Flash/300 Chg Mecha Control Block Diagram

    DVP-CX875P 3-7. NAND FLASH/300 CHG MECHA CONTROL BLOCK DIAGRAM LS-62 BOARD CS-58 BOARD MB-107 BOARD (6/6) AI-25 BOARD (1/2) CK-118 BOARD (SEE PAGE 4-51) (SEE PAGE 4-52) (SEE PAGE 4-31) (SEE PAGE 4-35) (SEE PAGE 4-51) XGAIT XGAIT SYSTEM PH221...

  • Page 43: Interface Control Block Diagram

    DVP-CX875P 3-8. INTERFACE CONTROL BLOCK DIAGRAM AI-25 BOARD (2/2) FR-189 BOARD FL-128 BOARD (SEE PAGE 4-35) (SEE PAGE 4-47) (SEE PAGE 4-55) LED+5V CN305 SW+5V CN307 CN103 CN401 (2/2) FLIP (AMBER) BZ101 BUZZER IC103 LOAD (AMBER) LED DRIVE CN102 DIRECT SEARCH (AMBER)

  • Page 44: Power (1) Block Diagram

    DVP-CX875P 3-9. POWER (1) BLOCK DIAGRAM VD-33 BOARD (SEE PAGE 4-39) POWER BLOCK AI-25 BOARD CN201 (SEE PAGE 4-35) IC101 (ZSSR113M) IP201 D201 L202 EVER+11V (SEE PAGE 4-63) −5V REG T101 CN302 CN101 SW–10V Q201 IC102 D202 L203 D101 – 104...

  • Page 45: Power (2) Block Diagram

    DVP-CX875P 3-10. POWER (2) BLOCK DIAGRAM AV-66 BOARD (SEE PAGE 4-43) Q203, 204 CN202 EVER+11V IC202 Q201 AUDIO AMP SW–10V IC201 POWER 1 +5V REG (SEE PAGE 3-18) 3 IN D201 AUDIO MUTE V EVER+5V (SEE PAGE 3-12) IC203 OPTICAL DIGITAL...

  • Page 46: Frame Schematic Diagram

    DVP-CX875P SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS For schematic diagram: THIS NOTE IS COMMON FOR PRINTED WIRING • Caution when replacing chip parts. BOARDS AND SCHEMATIC DIAGRAMS. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, For printed wiring boards: because it is damaged by the heat.
  • Page 47 DVP-CX875P 4-1. FRAME SCHEMATIC DIAGRAM FRAME (1) CN301 EVER-11V EVER+11V AI-25 BOARD (1/2) EVER+5V PCONT HARNESS M+11V (AP-155) M+11V M_GND M_GND SW+5V SW+3.3V ZSSR113M BOARD HARNESS B to B B to B (AM-131) (FIM-002) EVER-11V EVER+11V CN201 EVER+5V PCONT SPDIF...
  • Page 48 DVP-CX875P FRAME (2) CN103 CN307 CSEL2 CSEL2 DOWNLOAD SLINK SLINK (JIG) CSEL1 CSEL1 CN306 VMUTE VMUTE 3.3V_MNT SW-10V SW-10V XFRRST SWGND SWGND XIFBUSY SW+5V SW+5V XIFCS SW+5V SW+5V EVER+5V EVER+5V AI-25 BOARD (2/2) AMUTE AMUTE IFRST PCONT PCONT PCONT IFRST...

  • Page 49: Relay) Printed Wiring Board And Schematic Diagram

    DVP-CX875P 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS TK-63 (RELAY) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: TK-63 board; 2,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram.
  • Page 50 DVP-CX875P There are a few cases that the part isn't mounted in this model is printed on this diagram. MB-107 (SIGNAL PROCESS, SERVO) PRINTED WIRING BOARD – Ref. No.: MB-107 board; 3,000 series – : Uses unleaded solder. MB-107 BOARD (SIDE A)
  • Page 51 DVP-CX875P MB-107 BOARD (SIDE B) MB-107 BOARD (B SIDE) C536 D501 D-15 JL202 FL107 JL211 JL123 JL125 FB109 JL204 JL234 JL223 JL118 JL119 JL121 JL233 JL224 JL124 R172 JL231 JL228 JL120 JL201 IC101 JL205 JL225 C244 C251 JL213 JL122 FL201...

  • Page 52: Rf Amp, Servo) Schematic Diagram

    DVP-CX875P The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont MB-107 (RF AMP, SERVO) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que –...

  • Page 53: Arp, Servo Dsp) Schematic Diagram

    DVP-CX875P MB-107 (ARP, SERVO DSP) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (2/10) NO MARK:PB MODE MB-107 BOARD XRST (5/10) R360 C335 0.01u MDPO MB-107 BOARD (4/10)
  • Page 54 DVP-CX875P MB-107 (AV DECODER) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (3/10) NO MARK:PB MODE XAVDCS3 XWRH MB-107 BOARD XAVDIT XAVDCS2 (5/10) XAVDWT 27MAVD MB-107 BOARD (6/10)

  • Page 55: Motor Drive) Schematic Diagram

    DVP-CX875P MB-107 (MOTOR DRIVE) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (4/10) SIGNAL PATH SPINDLE SERVO(SPEED AND PHASE) NO MARK:PB MODE TRACKING SERVO DVD/CD CDV +3.3V SLED SERVO DVD/CD...

  • Page 56: System Control) Schematic Diagram

    DVP-CX875P MB-107 (SYSTEM CONTROL) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (5/10) NO MARK:PB MODE D:DVD PLAY C:CD PLAY P:PAL DVD PLAY N:NTSC DVD PLAY +3.3V MB-107 BOARD (6/10)

  • Page 57: Clock Generator

    DVP-CX875P MB-107 (CLOCK GENERATOR) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – • Waveforms 1 IC103 4 MB-107BOARD (6/10) LDM- NO MARK:PB MODE MB-107 BOARD LDM+ (4/10) *:IMPOSSIBLE TO MEASURE THE VOLTAGE AT THE MARKED POINTS.
  • Page 58 DVP-CX875P MB-107 (I/P CONVERTER) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (7/10) NO MARK:PB MODE R612 R613 MB-107 BOARD (5/10) R622 R626 R630 R634 R619 C604 C611...

  • Page 59: Video Encoder) Schematic Diagram

    DVP-CX875P MB-107 (VIDEO ENCODER) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (8/10) NO MARK:PB MODE C634 0.22u R021 C626 100u 6.3V R675 C624 JL608 0.22u VDD_IO S_BLANK...

  • Page 60: Audio D/A Converter) Schematic Diagram

    DVP-CX875P MB-107 (AUDIO D/A CONVERTER) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – • Waveforms 1 IC503 4 MB-107 BOARD (9/10) NO MARK:DVD/CD PLAY D:DVD PLAY C:CD PLAY P:PAL DVD PLAY N:NTSC DVD PLAY DVD: 4.3 Vp-p (48.1 kHz)

  • Page 61: Nand Flash I/F, Extension I/O) Schematic Diagram

    DVP-CX875P MB-107 (NAND FLASH I/F, EXTENSION I/O) SCHEMATIC DIAGRAM • See page 4-9 for printed wiring board. – Ref. No.: MB-107 board; 3,000 series – MB-107 BOARD (10/10) MB-107 BOARD (2/10) TDIKT NO MARK:PB MODE MB-107 BOARD (3/10) NT/PAL MB-107 BOARD (3/10)

  • Page 62: Printed Wiring Board

    DVP-CX875P AI-25 (LOADING/TURN TABLE/DOOR MOTOR DRIVE, INTERFACE) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: AI-25 board; 1,000 series – : Uses unleaded solder.

  • Page 63: Loading/Turn Table/Door Motor Drive, Interface) Schematic Diagram

    DVP-CX875P AI-25 (LOADING/TURN TABLE/DOOR MOTOR DRIVE, INTERFACE) SCHEMATIC DIAGRAM – Ref. No.: AI-25 board; 1,000 series – AI-25 BOARD NO MARK:PB MODE Q302 C303 TURN TABLE 0.1u CONTROL CN306 Q302 JS301 JL356 3.3V_MNT UN2212-TX 0.60mm 3.3V_MNT JS302 C304 XFRRST JL357 0.60mm...

  • Page 64: Printed Wiring Board

    DVP-CX875P VD-33 (VIDEO BUFFER) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: VD-33 board; 4,000 series – : Uses unleaded solder. COMPONENT VD-33 BOARD...

  • Page 65: Video Buffer) Schematic Diagram

    DVP-CX875P VD-33 (VIDEO BUFFER) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: VD-33 board; 4,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.

  • Page 66: Printed Wiring Board

    DVP-CX875P AV-66 (AUDIO AMP) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: AV-66 board; 1,000 series – : Uses unleaded solder. AV-66 BOARD DIGITAL...

  • Page 67: Audio Amp) Schematic Diagram

    DVP-CX875P AV-66 (AUDIO AMP) SCHEMATIC DIAGRAM – Ref. No.: AV-66 board; 1,000 series – AV-66 BOARD NO MARK:PB MODE D:DVD PLAY C:CD PLAY Q204 C204 2SB710A-RTX 330u R206 CN202 JL201 6.3V 10.9 10.8 EVER+11V SIGNAL PATH JL217 10.1 R208 AUDIO...

  • Page 68: Printed Wiring Board

    DVP-CX875P FR-189 (INTERFACE CONTROL) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: FR-189 board; 1,000 series – : Uses unleaded solder. FR-189 BOARD (SIDE A)

  • Page 69: Interface Control) Schematic Diagram

    DVP-CX875P FR-189 (INTERFACE CONTROL) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: FR-189 board; 1,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.

  • Page 70: Printed Wiring Board

    DVP-CX875P CK-118 (DISC SENSOR), CS-58 (CHUCKING SENSOR), LC-78 (LOADING/CHUCKING MOTOR), LS-62 (LOADING SENSOR), LL-12 (LOADING GUIDE INDICATOR L), LR-17 (LOADING GUIDE INDICATOR R) PRINTED WIRING BOARDS – Ref. No.: CK-118 board, CS-58 board, LC-78 board, LS-62 board, LL-12 board, LR-17 board; 2,000 series –...
  • Page 71 DVP-CX875P CK-118 (DISC SENSOR), CS-58 (CHUCKING SENSOR), LC-78 (LOADING/CHUCKING MOTOR), LS-62 (LOADING SENSOR), LL-12 (LOADING GUIDE INDICATOR L), LR-17 (LOADING GUIDE INDICATOR R) SCHEMATIC DIAGRAMS – Ref. No.: CK-118 board, CS-58 board, LC-78 board, LS-62 board, LL-12 board, LR-17 board; 2,000 series –...
  • Page 72 DVP-CX875P FL-128 (FUNCTION SWITCH), SW-374 (EJECT SWITCH) PRINTED WIRING BOARDS There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: FL-128 board, SW-374 board; 2,000 series – FL-128 BOARD : Uses unleaded solder.
  • Page 73 DVP-CX875P FL-128 (FUNCTION SWITCH), SW-374 (EJECT SWITCH) SCHEMATIC DIAGRAMS – Ref. No.: FL-128 board, SW-374 board; 2,000 series – FL-128 BOARD R403 R402 R401 R406 R404 R405 CN401 JL401 L_FLIP JL402 LED+5V JL403 L_LOAD JL404 L_DSRC JL405 L_EASY JL406 L_DCHG...
  • Page 74 DVP-CX875P TS-154 (TURN TABLE SENSOR), TM-129 (TURN TABLE MOTOR), DA-32 (DOOR SENSOR), DM-105 (DOOR MOTOR) PRINTED WIRING BOARDS – Ref. No.: TS-154 board, TM-129 board, DA-32 board, DM-105 board; 2,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram.
  • Page 75 DVP-CX875P TS-154 (TURN TABLE SENSOR), TM-129 (TURN TABLE MOTOR), DA-32 (DOOR SENSOR), DM-105 (DOOR MOTOR) SCHEMATIC DIAGRAMS – Ref. No.: TS-154 board, TM-129 board, DA-32 board, DM-105 board; 2,000 series – TS-154 BOARD DM-105 BOARD NO MARK:PB MODE CN103 CN191...
  • Page 76 DVP-CX875P ZSSR113M (SWITCHING REGULATOR) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: ZSSR113M board; 1,000 series – : Uses unleaded solder. ZSSR113M BOARD RJ108...

  • Page 77: Zssr113M (Switching Regulator) Schematic Diagram

    DVP-CX875P ZSSR113M (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: ZSSR113M board; 1,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.

  • Page 78: Ic Pin Function Description

    DVP-CX875P SECTION 5 IC PIN FUNCTION DESCRIPTION...
  • Page 79 5-2 E...

  • Page 80: Test Mode

    DVP-CX875P SECTION 6 TEST MODE 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment eas- The same contents as board detail check by serial interface can be ily using the remote commander and monitor TV. The instructions, checked from the remote commander.
  • Page 81 Submenu (2-6) M’t check Error 22: region code discord. Selecting 2 and subsequent items calls the submenu screen of each Accordance between region codes, one is detected with item. model resistance and destination resistance, and the other Indication of “–” in the submenu means the check is not supported is detected with region resistance, is check.
  • Page 82 There may be a single piece of hardware is defective, (5-5) ARP RAM Check mounted imperfect or not mounted. Data write → read, and accord check Error 11: ARP RAM read data discord The program code data stored in ROM are copied to all 5.
  • Page 83 7. Video Check Items List (7-2) Color Bar AVD color bar command write → Video OUT 2) Version Error: Not detected. (2-2) Revision The command is transferred to the AVD, and the color bar (2-3) ROM Check Sum signals are output from video terminals. (2-4) Model Type They are output from all video terminals (Composite, Y/C, (2-5) Region...
  • Page 84 Error Codes List 00: Error not detected 01: RAM write/read data discord 02: Gate Array NG 03: EEPROM NG 04: Flash memory clear error 05: Flash memory write error 06: Flash memory read data discord 07: 2725 read data discord 08: ARP register read data discord 09: ARP ←→...

  • Page 85: Drive Auto Adjustment

    1. DVD-SL (single layer) 6-4. DRIVE AUTO ADJUSTMENT [ENTER] Select , insert DVD single layer disc, and press key, and the adjustment will be made through the following steps, then DVD reference disc adjusted values will be written to the EEPROM. Single Layer HLX-503 (J-6090-069-A) (NTSC) OR DVD Single Layer Disc Adjustment Steps...
  • Page 86 2. CD 3. DVD-DL (dual layer) [ENTER] [ENTER] Select , insert CD disc, and press key, and the adjust- Select , insert DVD dual layer disc, and press key, ment will be made through the following steps, then adjusted val- and the adjustment will be made through the following steps, then ues will be written to the EEPROM.

  • Page 87: Drive Manual Operation

    0. Disc Check Memory 6-5. DRIVE MANUAL OPERATION Disc Check On the Test Mode Menu screen, select , and the manual opera- tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. 1.
  • Page 88 Focus Search the focus and turn on the focus. Disc Type 1. Disc Type Auto Check Turn ON/OFF the tracking servo. 2. DVD SL 12cm 3. DVD DL 12cm 4. CD 12cm Sled Turn ON/OFF the sled servo. 5. LCD 12cm If PLL is not locked (or can not be 6.
  • Page 89 5. Auto Adjustment ← Fj (L0 → L1) Focus jump reverse. (Trk/Sled Servo OFF) Auto Adjustment ↑ Lj (L1 → L0) Layer jump forward. 1. Auto TRK. Offset 2. Auto FCS Balance (Trk/Sled Servo ON) 3. Auto Focus Offset 4. Auto Focus Gain ↓...
  • Page 90 [DOWN] : Chucks the MD block. EEPROM Data 3 -– DL -– Chuck CD LCD Analog FRSW xx xx [RIGHT] PLL Dac Gain xx xx : Moves the disc from the un-chucked state Mirror Time xx xx Loading (Front) to the T. table then to the MD block. THR A&L: xx xx xx/xx xx [LEFT]...
  • Page 91 [LEFT] Display when the Mecha Adjust is selected in the 300 CHG Mecha : Determines the detection position of the T. Con Menu 2 table by counting the number of slit’s tooth of the T. table when the T. table is turned ## Mecha Adjust Mode ## counterclockwise by a full rotation.

  • Page 92: Mecha Aging

    This mode is prepared for measurement of 6-8. VERSION INFORMATION the load to the T. table as described before. Result of the measurement is not reflected ## Version Information ## on adjustment. After this mode is selected, Mecha Initial IF con. Ver:x.xxx(xxxx) Group must be performed.

  • Page 93: If Con Self Diagnostic Function

    6-10. IF CON SELF DIAGNOSTIC FUNCTION 1. FR-189 BOARD (IF CON) TEST MODE The front board test mode is the IF CON self diagnostic mode. The IF CON can diagnose the functions of the front panel boards that the IF CON controls. Normally, the IF CON makes a serial communication with the SYSTEM CONTROL and operates fol- lowing the commands from the SYSTEM CONTROL, but in the Test mode, the IF CON operates independently from the SYS-...
  • Page 94 2-2. Operation of Auto Self Check When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated. (1) FLD and LED all ON (for 5 seconds) MULTI ANGLE NTSC...
  • Page 95 2-3. Each Self Check Function Each Self Check function tests the FLD display, LED display, and key input. IC106: Pin No. (Signal) Input Voltage [V] Pin ea (AD2) Pin es (AD3) Pin ed (AD4) Pin ef (AD5) Pin eg (AD6) Pin eh (AD7) Pin ej (AD8) PICTURE...
  • Page 96 Key code display (at input of key, Key code: 0Ah) ANGLE NTSC MULTI AUDIO PROGRESSIVE DISC VIDEO ALL DISCS SHUFFLE SACD Digital REPEAT 1 PGM A- B MP 3 INDEX TRACK HOUR CHAP TITLE GROUP At input of faulty voltage ANGLE NTSC MULTI AUDIO...
  • Page 97 Remote commander key code display (at input of key, Key code: 39h) ANGLE NTSC MULTI AUDIO PROGRESSIVE DISC VIDEO ALL DISCS SHUFFLE SACD Digital REPEAT 1 PGM A- B MP 3 INDEX TRACK HOUR GROUP TITLE CHAP 2-3-4. Communication Monitoring Display The communication state is monitored and displayed while the key name on the main unit and the remote commander is displayed.
  • Page 98 2-3-5. FLD Anode Test Display and SHUTTLE Click Operation Test 2-3-5-1. Transition Keys in Self Check Mode • on the main unit and the remote commander → • SHUTTLE on the remote commander during Anode Test dis- play (This model does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/ SHUTTLE) 2-3-5-2.
  • Page 99 2-3-6. FLD Grid Test Display and SHUTTLE Click Operation Test 2-3-6-1. Transition Keys in Self Check Mode • on the main unit and the remote commander ↑ • SHUTTLE on the remote commander during Grid Test display (This model does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/ SHUTTLE) 2-3-6-2.
  • Page 100 FLD display during LED Test ANGLE NTSC MULTI AUDIO PROGRESSIVE DISC VIDEO ALL DISCS SHUFFLE SACD Digital REPEAT 1 PGM A- B MP 3 INDEX TRACK HOUR CHAP GROUP TITLE 2-3-8. ACS Test Display 2-3-8-1. Transition Keys in Self Check Mode [PREV NEXT] •...
  • Page 101 NTSC ANGLE MULTI AUDIO PROGRESSIVE DISC VIDEO ALL DISCS SHUFFLE SACD Digital REPEAT 1 PGM A- B MP 3 INDEX TRACK HOUR TITLE CHAP GROUP ( 5G,3G ) ( 15G,14G,12G~2G ) ( 15G~1G ) ANODE CONNECTION SACD VIDEO AUDIO ; Digital MP 3 PROGRESSIVE ALL DISCS...

  • Page 102: Troubleshooting

    1-3. Clock signal check 6-11. TROUBLESHOOTING Measure the clock signal frequency at CPUCK (CL102) of 6-11-1. Cannot Enter Test Mode SYSCON (IC104) with an oscilloscope. You cannot enter the Test mode when either button has been pressed If the 8.25 MHz signal appears. t Check the machine ac- by any reason with the board assembled in the front panel.
  • Page 103 1-3-2. When the 33 MHz signal appears at CPUCK 3. If the message “SDSP No Ack” appears after the menu • WAIT signal check is displayed. 3-1. ARP & SERVO clock signal check Observe XWAIT (pin-yj) of SYSCON (IC104) with an os- cilloscope.
  • Page 104 2. Power LED does not light in green after transmitting 4. The LED lights in green but the FL display does not the POWER on command. It remains lighting in red (in light when the POWER button is pressed. the STANDBY mode). Connection between the power supply block and the AI-25 2-1.

  • Page 105: Electrical Adjustment

    DVP-CX875P SECTION 7 ELECTRICAL ADJUSTMENT 7-1. POWER SUPPLY CHECK In making adjustment, refer to 7-6. Adjustment Related Parts Arrangement. 1. ZSSR113M Board Note: During diagnostic check, the characters and color bars can Mode be seen only with the NTSC monitor. Therefore, for diag-...

  • Page 106: Adjustment Of Video System

    7-2. ADJUSTMENT OF VIDEO SYSTEM 3. Checking S Video Output S-Y <Purpose> Check S-terminal video output. If it is incorrect, pictures will not 1. Video Level Adjustment (MB-107 BOARD) be displayed correctly in spite of connection to the TV with a S- <Purpose>...

  • Page 107: Checking Component Video Output Y

    5. Checking Component Video Output Y 7. Checking Component Video Output R-Y <Purpose> <Purpose> This checks component video output Y. If it is incorrect, correct This checks component video output R-Y. If it is incorrect, cor- brightness will not be attained when connected to, for instance, rect colors will not be displayed when connected to, for instance, projector.

  • Page 108: Adjustment Related Parts Arrangement

    7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-107 BOARD (SIDE A) RV601 CN601 VIDEO LEVEL ADJ RV601 IC604 IC403 RV602 RV602 COMP OUT ZSSR113M BOARD (SIDE B) CN201 7-6 E...

  • Page 109: Repair Parts List

    DVP-CX875P SECTION 8 REPAIR PARTS LIST 8-1. EXPLODED VIEWS The components identified by mark 0 or dotted line with mark 0 are NOTE: critical for safety. • -XX and -X mean standardized parts, so they may • Items marked “*” are not stocked since they are Replace only with part number speci- have some difference from the original one.

  • Page 110: Front Panel Assembly-1

    8-1-2. FRONT PANEL ASSEMBLY-1 (including not supplied (included in 52) supplied supplied supplied supplied front panel assembly-2 supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-951-620-01 SCREW (2.6X8), +BVTP 3-066-546-01 PLATE, SHAFT STOPPER 3-531-576-01 RIVET A-6062-492-B GEAR (B) BLOCK ASSY, DRIVING A-6062-491-D GEAR (A) BLOCK ASSY, DRIVING 3-970-608-01 SUMITITE (B3), +BV...

  • Page 111: Front Panel Assembly-2

    A-6061-034-A PANEL ASSY, FRONT A-6061-059-A FR-189 BOARD, COMPLETE 3-064-088-01 KNOB, ACS/AMS 1-757-231-11 CABLE, FLEXIBLE FLAT (FLS-003) X-3951-018-1 PANEL (R) ASSY, SUB 1-476-273-11 ENCODER, ROTARY X-3951-019-1 PANEL (L) ASSY, SUB 3-058-938-32 STICK, CURSOR 4-963-404-22 EMBLEM (5-A), SONY 3-058-939-31 RING, SHUTTLE 4-951-620-01 SCREW (2.6X8), +BVTP...

  • Page 112: Chassis Assembly-1

    8-1-4. CHASSIS ASSEMBLY-1 mechanical deck-1 not supplied chassis assembly-2 not supplied supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-570-118-00 CUSHION, MOTOR 3-970-608-21 SUMITITE (B3), +BV 3-064-062-01 SCREW, CUSHION STOPPER 3-970-608-01 SUMITITE (B3), +BV A-6062-493-A DRIVING ASSY, T 1-541-632-11 MOTOR, DC...

  • Page 113: Chassis Assembly-2

    8-1-5. CHASSIS ASSEMBLY-2 chassis assembly-3 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-948-027-11 FOOT (DIA. 50) A-6061-051-A AV-66 BOARD, COMPLETE A-6061-049-A MB-107 BOARD, COMPLETE 3-058-511-51 +BV IBR A-6061-053-A VD-33 BOARD, COMPLETE 4-962-113-01 CLAMP...

  • Page 114: Chassis Assembly-3

    8-1-6. CHASSIS ASSEMBLY-3 not supplied not supplied not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified.

  • Page 115: Mechanism Deck Assembly-1

    8-1-7. MECHANISM DECK ASSEMBLY-1 mechanism deck assembly-2 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-970-608-21 SUMITITE (B3), +BV 1-757-232-11 CABLE, FLEXIBLE FLAT (FTD-001) X-3951-016-1 GUIDE ASSY, CENTER 1-757-234-11 CABLE, FLEXIBLE FLAT (FDD-003) 3-064-126-01 SHEET, GUIDE A-6062-496-B TABLE ASSY, TURN 3-064-084-01 CLAMP (FCR-60), FLAT 3-831-441-99 CUSHION (A)

  • Page 116: Mechanism Deck Assembly-2

    8-1-8. MECHANISM DECK ASSEMBLY-2 supplied supplied supplied supplied supplied supplied supplied supplied supplied not supplied not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité.

  • Page 117: Electrical Parts List

    AI-25 8-2. ELECTRICAL PARTS LIST NOTE: The components identified by • Due to standardization, replacements in the • Items marked “*” are not stocked since they mark 0 or dotted line with mark parts list may be different from the parts speci- are seldom required for routine service.
  • Page 118 AV-66 CK-118 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-6061-051-A AV-66 BOARD, COMPLETE R207 1-216-097-11 RES-CHIP 100K 1/10W R208 1-216-067-00 METAL CHIP 5.6K 1/10W ********************** (Ref. No. 1, 000 Series) R209 1-216-073-00 RES-CHIP 1/10W R212 1-216-073-00 RES-CHIP 1/10W <...
  • Page 119 CK-118 CS-58 DA-32 DM-105 FL-128 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q002 8-729-120-28 TRANSISTOR 2SC2412K-T-146-QR FL-128 BOARD, COMPLETE Q003 8-729-043-84 TRANSISTOR PT380F3 *********************** Q004 8-729-120-28 TRANSISTOR 2SC2412K-T-146-QR (Ref. No. 2, 000 Series) < RESISTOR > <...
  • Page 120 FL-128 FR-189 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R405 1-216-041-00 METAL CHIP 1/10W C108 1-137-150-11 FILM 0.01uF 100V C109 1-163-021-11 CERAMIC CHIP 0.01uF R406 1-216-041-00 METAL CHIP 1/10W C111 1-164-489-11 CERAMIC CHIP 0.22uF R407 1-216-059-00 METAL CHIP 2.7K 1/10W...
  • Page 121 FR-189 LC-78 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R152 1-216-071-00 METAL CHIP 8.2K 1/10W < FLUORESCENT INDICATOR TUBE > R153 1-216-081-00 METAL CHIP 1/10W R154 1-216-073-00 RES-CHIP 1/10W ND101 1-518-832-11 INDICATOR TUBE, FLUORESCENT R155 1-216-073-00 RES-CHIP 1/10W R156...
  • Page 122 LC-78 LL-12 LR-17 LS-62 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > C109 1-126-209-11 ELECT CHIP 100uF C111 1-162-970-11 CERAMIC CHIP 0.01uF CN201 1-764-832-11 CONNECTOR, BOARD TO BOARD 4P C113 1-162-970-11 CERAMIC CHIP 0.01uF C115 1-162-970-11 CERAMIC CHIP...
  • Page 123 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C261 1-162-959-11 CERAMIC CHIP 330PF C426 1-162-970-11 CERAMIC CHIP 0.01uF C262 1-107-826-11 CERAMIC CHIP 0.1uF C427 1-162-970-11 CERAMIC CHIP 0.01uF C263 1-124-779-00 ELECT CHIP 10uF C429 1-162-970-11 CERAMIC CHIP 0.01uF C264 1-162-970-11 CERAMIC CHIP...
  • Page 124 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C701 1-162-970-11 CERAMIC CHIP 0.01uF IC202 6-701-878-01 IC FAN8034L C702 1-162-970-11 CERAMIC CHIP 0.01uF IC301 6-701-876-01 IC CXD9703R C703 1-162-962-11 CERAMIC CHIP 470PF IC302 6-702-302-01 IC TK11133CSCL-G C704 1-162-962-11 CERAMIC CHIP 470PF...
  • Page 125 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R133 1-216-833-11 METAL CHIP 1/10W R231 1-216-855-11 METAL CHIP 680K 1/10W R138 1-216-809-11 METAL CHIP 1/10W R232 1-216-839-11 METAL CHIP 1/10W R139 1-216-833-11 METAL CHIP 1/10W R233 1-216-853-11 METAL CHIP 470K 1/10W...
  • Page 126 MB-107 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R349 1-216-833-11 METAL CHIP 1/10W R665 1-216-864-11 SHORT CHIP R351 1-216-295-11 SHORT CHIP R674 1-216-819-11 METAL CHIP 1/10W R352 1-216-295-11 SHORT CHIP R675 1-216-821-11 METAL CHIP 1/10W R358 1-216-833-11 METAL CHIP 1/10W...
  • Page 127 1-164-004-11 CERAMIC CHIP 0.1uF C132 1-164-004-11 CERAMIC CHIP 0.1uF < IC > < CONNECTOR > IC101 8-759-667-17 IC L79M05TLL-SONY-TL IC102 6-701-820-01 IC LA73053-TLM-E CN131 1-766-723-11 CONNECTOR, BOARD TO BOAR 3P < JACK > TS-154 BOARD, COMPLETE J101 1-793-475-21 JACK, PIN 2P (VIDEO OUTPUT)
  • Page 128 VD-33 POWER BLOCK (ZSSR113M) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ACCESSORIES R121 1-216-021-00 METAL CHIP 1/10W ************ R122 1-216-295-11 SHORT CHIP R123 1-216-295-11 SHORT CHIP 1-477-328-11 REMOTE COMMANDER (RMT-D149A) R124 1-216-295-11 SHORT CHIP 1-823-364-21 CORD, CONNECTION R125 1-216-295-11 SHORT CHIP (STEREO AV CABLE 1.5m)
  • Page 129 DVP-CX875P Sony Corporation 2002H0500-1 9-929-731-11 Home Video Company © 2002. 8 – 180 – Published by Quality Assurance Dept.

This manual is also suitable for:

Rmt-d149a

Table of Contents