Page 1
3D HD VIDEO CAMERA MCC-3000MT SERVICE MANUAL 1st Edition...
Page 2
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres. Pour toute réparation faire appel à une personne compétente uniquement. MCC-3000MT...
Related manuals The following manuals are available in this model. If this manual is required, please contact your local Sony Sales Office/Service Center. • Instructions for Use (Supplied with this unit) This manual is necessary for application and operation of this unit.
Use a Hosiden’s DC power plug for connection to the DC IN (DC power input) connector. DC power plug: TCP8927-53 We recommend a power cable wire having rating of rated voltage 60 V or more and allowable current 7 A or more. MCC-3000MT...
1-2-2. CHU (Camera Head Unit) w=35 Unit: mm 1-2-3. Tripod Adaptor (Supplied Accessories) (32) Unit: mm For tripod 1/4" -20UNC (P=1.270) JIS B 7103 MCC-3000MT...
1-3. Board Location CN-3534 CN-3571 RE-309 CN-3549 TR-150 (Camera A) KY-687 TR-150 (Camera B) PS-772 (Camera B) PS-772 (Camera A) CN-3550 (Camera A) DPR-340 (Camera A) AVP-18 (Camera A) CN-3550 (Camera B) AVP-18 (Camera B) DPR-340 (Camera B) MCC-3000MT...
Transmitted data - External View - RXD IN Received data — No connection Signal Specifications — +24 V +12 to 24 Vdc — No connection — — No connection — No connection — No connection — No connection MCC-3000MT...
CMOS image sensor and of lens. The output digital video (Y/C) signal is sent to the next circuit the video (baseband video) signal processing circuit. Transmission block (reception): The 12-bit digital video (RGB) signals supplied from the TR-150 board first enter the camera signal processor IC (IC100). MCC-3000MT...
The real time clock IC (IC710) is built in. The real time clock IC (IC710) is not backed up by a lithium coin battery, and the time after the power supply is turned on is read or set via IC700 on the AVP-18 board. MCC-3000MT...
IC. • Protection of input system short-circuit: A 3.15 A fuse is provided in the 24 V power line to blow the fuse at an input overcurrent to protect the circuit. 1-10 MCC-3000MT...
Page 19
• Protection of reverse power connection: If input voltage polarity is reversely connected, Q901 on the AVP-18 board is immediately turned off and the GND side of the UNREG power is shut off to activate the protection function. 1-11 MCC-3000MT...
Page 20
Output voltage and current in each power system are monitored, and circuit settings are made to activate the protection circuit for each block. The protection circuit is not reset automatically even after the cause of the short-circuit has been cleared, and power must be turned on again. 1-12 MCC-3000MT...
Conversion cable for PLD data download tool (for CHU camera) 7-432-114-11 Locking compound For preventing screw from being loosened 7-651-000-10 Sony (SGL-601) 50 g grease Lubricant Commercially available Grayscale chart Reflective type (16 : 9), Camera adjustment Commercially available Star chart Reflective type, Camera adjustment 1-7-2.
• Mini USB cable: Part number 1-828-544-12 • Update software • Latest-version firmware Note For how to obtain the update software and the latest-version firmware, contact your local Sony Sales Office/Service Center. • DC power cable Note For power supply and DC power cable, refer to “1-1.
Page 23
Turn off and on the power of the unit and check item “Version” of the OTHERS menu to confirm that the firmware version has been updated. Note For details of the OTHERS menu, refer to the Instructions for Use. Attach the USB cover that was detached in step 2. 1-15 MCC-3000MT...
For CHU (camera head unit) Equipment/Service Tools • PLD download tool (Sony part number: J-7120-140-A): A cable to connect between PC and the unit • PLD writing conversion harness (Sony part number: 1-966-732-11): A conversion cable for CHU camera Note When connecting the fixture to this unit, remove the fixture cable from the fi xture itself.
Page 25
Program the PLD (or ROM for PLD) by the PLD download tool software. After programming has been successfully completed (with no error message), turn off the power and disconnect the DC power cable from the DC IN connector. 1-17 MCC-3000MT...
Check the connection with the lens unit. If there is no defect, replace the lens unit. 17016 Abnormality in obtaining the lens switch Check the connection with the lens unit. If there is no defect, replace the lens unit. 1-18 MCC-3000MT...
This unit is equipped with positive-characteristic thermistors (power thermistors) as circuit protection elements. The positive-characteristic thermistor limits the electric current flowing through the circuit as the internal resistance increases when an excessive current flows or when the ambient temperature increases. 1-19 MCC-3000MT...
• Check that the conductive side of the flexible card wire is not contaminated. Type A Type A Isolation surface Disconnecting Turn off the power. Slide or lift up the portion A in the direction of the arrow to unlock and pull out the flexible card wire. 1-20 MCC-3000MT...
• Check that the contact surface of the fine-wire coaxial cable connector is free from dirt or dust. Type A Disconnecting OK Hold the connector to remove. Do not attempt to remove by pulling the cables. Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it. 1-21 MCC-3000MT...
Do not attempt to remove by pulling the cable. Hold the plug of coaxial cable. Pull out the coaxial cable in the direction arrow. Note Be sure to hold the plug when disconnecting the coaxial cable. Do not pull the cable. 1-22 MCC-3000MT...
Page 31
Connecting Hold the plug to connect Connecting connector Hold the plug of coaxial cable. Connect the coaxial cable perpendicularly to the connector. Push the plug into the connector while turning it clockwise and counterclockwise several times. 1-23 MCC-3000MT...
“2-7. Main Board Assembly (for CAMERA B)” CAMERA B) Rear Panel Assembly “2-14. Rear Panel Assembly” (6) Mounted circuit boards After replacing/repairing the mounted circuit boards (or the assembling parts including them), perform the steps after replacement/repair. “1-11-1. Requirements on Replacement of Boards or Parts” MCC-3000MT...
“2-9. AVP-18 Board” “1-11-1. Requirements on (10) Replacement of Boards or Parts” 2-1-2. Basic Knowledge Flexible card wire and fine-wire coaxial cable When installing the flexible card wire and fine-wire coaxial cable, connect the wire securely referring to “1-11. Note Service”. MCC-3000MT...
2-2. Top Cover Procedure Remove the eight screws to detach the top cover. Top cover B3 x 6 B3 x 6 B3 x 6 B3 x 6 Install the removed parts by reversing the steps of removal. MCC-3000MT...
CN102 B3 x 6 CN502 CN503 Flexible flat cables CN100 CN101 B3 x 6 KY-687 board B3 x 6 CN200 CN201 Remove the four knob "L"s. Disconnect the two harnesses from the two connectors (CN401,CN402) on the KY-687 board. MCC-3000MT...
Page 38
Remove the five screws to detach the KY-687 board, key (power) assembly and power key base. PSW3 x 6 Power key base CN402 Key (power) assembly CN401 Harness PSW3 x 6 KY-687 board Harness Knob L Install the removed parts by reversing the steps of removal. MCC-3000MT...
Remove the four screws to detach the four insulate spacers and LCD module. Remove the two solders to detach the two harnesses. PSW2 x 6 Harnesses Insulate spacers Solders PSW2 x 6 Insulate spacers LCD module Install the removed parts by reversing the steps of removal. MCC-3000MT...
Remove the solder to detach the CN-3571 board. D-sub connector socket 9P CN-3571 board Connector screws Solders CN801 locking compound to screw thread Harness When installing connector screws, apply locking compound to screw threads. Install the removed parts by reversing the steps of removal. MCC-3000MT...
Disconnect the harness from the connector (CN900) on the AVP-18 board. Disconnect the harness from the connector (CN1400) on the DPR-340 board. Disconnect the two coaxial cables from the connector (CN1301, CN1700) on the AVP-18 board. 10. Open the two clamps. MCC-3000MT...
Page 42
B3 x 6 Hole Main board assembly (for CAMERA A) Bosses Note When installing the main board assembly (for CAMERA A), fit the two bosses with the two holes. 13. Install the removed parts by reversing the steps of removal. 2-10 MCC-3000MT...
Disconnect the harness from the connector (CN900) on the AVP-18 board. Disconnect the harness from the connector (CN1400) on the DPR-340 board. Disconnect the two coaxial cables from the two connectors (CN1301, CN1700) on the AVP-18 board. 10. Open the two clamps. 2-11 MCC-3000MT...
Page 44
12. Remove the four screws to detach the main board assembly (for CAMERA B). B3 x 6 Hole B3 x 6 Hole Main board assembly (for CAMERA B) Bosses Note When installing the main board assembly (for CAMERA B), fit the two bosses with the two holes. 13. Install the removed parts by reversing the steps of removal. 2-12 MCC-3000MT...
Remove the four screws to detach the heat sink (DPR) and radiation sheet (DPR). Hole B3 x 6 B3 x 6 Heat sink (DPR) Radiation sheet (DPR) Bosses Note When installing the heat sink (DPR), fit the two bosses with the two holes. 2-13 MCC-3000MT...
Page 46
Remove the four screws to detach the DPR-340 board. PSW3 x 6 PSW3 x 6 DPR-340 board Install the removed parts by reversing the steps of removal. 2-14 MCC-3000MT...
Page 47
Remove the screw to detach the USB stopper. Disconnect the CN-3550 board from the connector (CN700) on the AVP-18 board. B3 x 6 USB stopper CN-3550 board CN700 AVP-18 board Remove the two screws (B3 x 6) to detach the main board frame (B). 2-15 MCC-3000MT...
Page 48
• When installing the main board frame (B), fit the two bosses with the two holes. • When installing the AVP-18 board, fit the two bosses with the two holes. Install the removed parts by reversing the steps of removal. 2-16 MCC-3000MT...
This illustration shows the removal of the CN-3550 board for CAMERA A. B3 x 6 USB stopper The same method applies to the removal of the CN-3550 board for CAMERA B. CN-3550 board CN700 AVP-18 board Install the removed parts by reversing the steps of removal. 2-17 MCC-3000MT...
Disconnect the harness from the connector (CN603) on the CN-3549 board. PSW3 x 6 Holes CN603 CN-3549 board Harness Bosses Note When installing the CN-3549 board, fit the two bosses with the two holes. Install the removed parts by reversing the steps of removal. 2-18 MCC-3000MT...
Cover”. ) Procedure Disconnect the three harnesses from the three connectors (CN001,CN002 and CN003) on the RE-309 board. Remove the four screws to detach the PS bracket. CN003 CN002 RE-309 board Harnesses CN001 PS bracket B3 x 6 2-19 MCC-3000MT...
Page 52
Remove the four screws to detach the RE-309 board and Radiation sheet (RE). Bosses Radiation sheet (RE) RE-309 board PSW3 x 6 Holes PSW3 x 6 Note When installing the RE-309 board, fit the two bosses with the two holes. Install the removed parts by reversing the steps of removal. 2-20 MCC-3000MT...
Page 53
CAMERA B. B3 x 6 Holes B3 x 6 Remove the two claws and Remove the PS bracket in the arrow direction. Disconnect the three harnesses from the three connectors (CN1, CN2 and CN3) on the PS-772 board. 2-21 MCC-3000MT...
Page 54
(PS). Holes Note When installing the PS bracket, fit the two bosses with the two holes Note When installing the PS bracket, do not catch the coaxial cables. PS bracket Coaxial cables 2-22 MCC-3000MT...
Page 55
Remove the three screws to detach the PS-772 board. Bosses PS-772 board Hole PSW3 x 6 Hole Note When installing the PS-772 board, fit the two bosses with the two holes. Install the removed parts by reversing the steps of removal. 2-23 MCC-3000MT...
(for CAMERA B) and remove the rear panel assembly. Note To prevent incorrect connection of connectors at the time of reconnection, attach a tag or the like that indicates each connector number and then disconnect the three fine-wire coaxial cables. 2-24 MCC-3000MT...
Page 57
Disconnect the harness from the connector (CN301) on the TR-150 board (for CAMERA B). CN300 Rear panel assembly CN100 CN102 CN101 Tags Harness TR-150 board (for CAMERA B) CN301 Fine-wire coaxial cables Harness Install the removed parts by reversing the steps of removal. 2-25 MCC-3000MT...
The same method applies to the removal of the TR-150 board Connector screws for CAMERA B. TR-150 board PSW3 x 6 Radiation sheet (TR) PSW3 x 6 Heat sink (TR) Install the removed parts by reversing the steps of removal. 2-26 MCC-3000MT...
Disconnect the harness from the connector (CN501) on the CN-3534 board. DC plate PSW3 x 6 Hole CN-3534 board Hole Harness Bosses Note When installing the CN-3534 board, fit the two bosses with the two holes. Install the removed parts by reversing the steps of removal. 2-27 MCC-3000MT...
Pressing the MENU button again closes the service menu display. Note Once the SERVICE menu has been displayed, simply pressing the MENU button displays the SERVICE menu instead of the normal SETUP menu unless the power is turned off. MCC-3000MT...
RPN correction point indicator cursor Cursor V Position — 1 to 1080 Displays and move the vertical address of the RPN correction point indicator cursor Cursor Next — — Moves the RPN correction point indicator cursor to the next RPN point Continued MCC-3000MT...
Turns On or Off the “REMOTE” indication show- ing the RS-232C remote control status RS-232C All Disp — On, Off Turns On or Off the display of all the information (including warning and caution) on the screen (out- put) MCC-3000MT...
3-3. MAINTENANCE Menu The MAINTENANCE menu enables adjustment of parameters that are unique to each unit for correction of nonuniformity of image pickup devices and lenses. For the each adjustment, refer to “4-1. Adjustment in MAINTENANCE Menu”. MCC-3000MT...
• The Correction Mode menu enables selection of the RPN correction mode for a pixel when the pixel is registered by manual registration of RPN. • The Correction Mode selecting Concealment and Compensation. • For the manual registration of RPN, select Concealment. MCC-3000MT...
RPN. Note If multiple RPN positions have the same address in the ascending order of the Cursor V Position, the RPN cursor moves in the ascending order of the Cursor H Position. MCC-3000MT...
• The RPN data that is registered at the factory and the RPN data is manually registered cannot be deleted by the Reset. • When the Reset menu is selected, the Execute and Cancel choices appear. Selecting Execute starts reset of RPN. MCC-3000MT...
Display block Diagnosis of video signal system (LCD and base page 3-10 band signal processing) Item 3 Media block page 3-10 Note Do not execute Item 3. Item 4 Audio block Diagnosis of audio input and output page 3-10 Continued MCC-3000MT...
Page 69
Select the Item of self-diagnosis from Item 1 to Item 13. Select “Execute” to execute the self-diagnosis. Upon completion of the self-diagnosis, the result of the self-diagnosis appears. Press the CANCEL button or SEL/SET knob while displaying the result of self-diagnosis to return to the INFORMATION menu. MCC-3000MT...
Page 70
Do not execute Item 3. Item 4: Audio Block Diagnosis Audio block diagnosis analyzes the following contents. Diagnosis Description Error Value Type 1/2 Note 0x02 Memory area check for audio block -1: Memory read/write comparison 1, 2 — 3-10 MCC-3000MT...
Page 71
• -4: Cannot diagnose since the power switch is not CAMERA When an error is detected in the version matching test, upgrade again to a compatible version. Contact your local Sony Sales Office/Service Center for information on versions. 3-11 MCC-3000MT...
The factor setting is On. 3-5-6. Setting All Disp Turn this On to display all the information (including warning and caution) on the screen (output) and turn this Off to hide it. Note The factor setting is On. 3-12 MCC-3000MT...
Section 4 Electrical Alignment Notes on Adjustments When making electrical adjustment, contact your local Sony Sales Office/Service Center. 4-1. Adjustment in MAINTENANCE Menu The MAINTENANCE menu of service menu enables adjustment of parameters that are unique to each unit for correction of nonuniformity of image pickup devices and lenses.
• The V Para menu enables the vertical Parabola white shading correction (sensitivity correction at the vertical center with respect to both ends) level. White shading adjustment method Preparation • Connect the HD waveform monitor to the SDI OUT connector. • Set the HD waveform monitor to the RGB mode. MCC-3000MT...
• Set the Knee of PICTURE PROFILE menu to the Auto or Off. Adjustment Procedure Adjust lens iris until white level (portion A) becomes approximately 100%. After that, open the lens iris by two stops. Select waveform of the signal at the center of grayscale signal on a waveform monitor. MCC-3000MT...
Page 76
(Align black level all channels to that of the channel having the lowest black level.) Notes • The flare adjustment can be performed only when there is a correct grayscale chart. • When there is no correct grayscale chart, adjust the values of R Flare, G Flare and B Flare to ±0. MCC-3000MT...
Therefore, specified parts should be used in the case of の部品を使ってください。 replacement. 2. Standardization of Parts 2. 部品の共通化 Some repair parts supplied by Sony differ from those ソニーから供給する補修用部品は,セットに使われて used for the unit. These are because of parts common- いるものと異なることがあります。...
7-628-000-05 s +PSW 2X6 1-968-559-11 s SUB HARNESS (KY-LCD-10) 3-178-214-01 s SCREW (M3X6), +B 4-142-684-01 s BASE, POWER KEY 4-142-685-01 s KNOB L 4-142-778-01 s CAP (MD), LENS MOUNT 4-382-854-51 s SCREW (M3X6), P, SW (+) 4-435-563-01 s COVER, TOP MCC-3000MT...
Page 79
3-178-214-01 s SCREW (M3X6), +B A-1893-126-A s MOUNTED CIRCUIT BOARD, CN-3571 4-148-736-01 s SCREW, CONNECTOR 1-563-815-11 s SOCKET, D-SUB CONNECTOR 9P 4-382-854-51 s SCREW (M3X6), P, SW (+) 1-968-546-11 s SUB HARNESS (KY-RS) 1-968-564-11 s HARNESS (SSL20-40-200) 2-133-531-11 s SCREW, CONNECTOR MCC-3000MT...
Page 80
A-1889-784-A s MOUNTED CIRCUIT BOARD, AVP-18 A-1889-786-A s MOUNTED CIRCUIT BOARD, CN-3550 1-968-550-11 s SUB HARNESS (KY-DPR-12) 1-968-560-11 s FLEXIBLE FLAT CABLE 1-968-562-11 s FLEXIBLE FLAT CABLE 3-080-039-01 s CLAMP (FCR-15), FLAT 3-178-214-01 s SCREW (M3X6), +B 4-382-854-51 s SCREW (M3X6), P, SW (+) MCC-3000MT...
Page 81
A-1889-784-A s MOUNTED CIRCUIT BOARD, AVP-18 A-1889-786-A s MOUNTED CIRCUIT BOARD, CN-3550 1-968-550-11 s SUB HARNESS (KY-DPR-12) 1-968-560-11 s FLEXIBLE FLAT CABLE 1-968-562-11 s FLEXIBLE FLAT CABLE 3-080-039-01 s CLAMP (FCR-15), FLAT 3-178-214-01 s SCREW (M3X6), +B 4-382-854-51 s SCREW (M3X6), P, SW (+) MCC-3000MT...
Page 83
1-968-551-11 s SUB HARNESS (TR-PS-8A) 1-968-552-11 s SUB HARNESS (TR-PS-8B) 1-968-553-11 s SUB HARNESS (TR-PS-12A) 1-968-554-11 s SUB HARNESS (TR-PS-12B) 1-968-555-11 s SUB HARNESS (AVP-RE) 1-968-557-11 s SUB HARNESS (KY-RE) 3-178-214-01 s SCREW (M3X6), +B 4-382-854-51 s SCREW (M3X6), P, SW (+) MCC-3000MT...
Page 85
3-992-447-01 s CAP (A ), BNC 3-992-448-01 s CAP (B), BNC 4-136-517-01 s WASHER, BNC COAXIAL FIXED 4-382-854-51 s SCREW (M3X6), P, SW (+) 4-435-562-01 s USB COVER 7-623-425-07 s LW 6, TYPE B 7-684-026-04 s N 6, TYPE 2 MCC-3000MT...
1-100-672-91 s CAP, CERAMIC 10MF C (3216) C503 1-100-505-91 s CAP, CERAMIC 0.1MF C (1005) C202 1-100-672-91 s CAP, CERAMIC 10MF C (3216) C504 1-100-611-91 s CAP, CERAMIC 22MF C (2012) C300 1-100-505-91 s CAP, CERAMIC 0.1MF C (1005) 5-10 MCC-3000MT...
Page 87
1-100-505-91 s CAP, CERAMIC 0.1MF C (1005) C653 1-112-180-21 s CAP, ALUMINIUM ELECT 150MF C803 1-100-505-91 s CAP, CERAMIC 0.1MF C (1005) C654 1-125-777-81 s CAP, CHIP CERAMIC 0.1MF B 1005 C804 1-162-964-91 s CAP,CHIP CERAMIC 1000PF B 1608 5-11 MCC-3000MT...
Page 88
1-100-597-91 s CAP, CHIP CERAMIC 0.1MF B 1608 C1018 1-164-315-91 s CAP, CERAMIC 470PF CH (1608) C1109 1-100-597-91 s CAP, CHIP CERAMIC 0.1MF B 1608 C1019 1-162-927-91 s CAP, CERAMIC 100PF CH 1608 C1110 1-100-597-91 s CAP, CHIP CERAMIC 0.1MF B 1608 5-12 MCC-3000MT...
Page 89
1-100-505-91 s CAP, CERAMIC 0.1MF C (1005) C1305 1-100-611-91 s CAP, CERAMIC 22MF C (2012) C1610 1-100-505-91 s CAP, CERAMIC 0.1MF C (1005) C1307 1-127-715-91 s CAP,CHIP CERAMIC 0.22MF B 1608 C1611 1-100-505-91 s CAP, CERAMIC 0.1MF C (1005) 5-13 MCC-3000MT...
Page 90
1-400-580-21 s FERRITE, EMI (SMD) D601 8-719-938-77 s DIODE SB05-05C-TB-E FB501 1-400-580-21 s FERRITE, EMI (SMD) D602 8-719-938-77 s DIODE SB05-05C-TB-E FB600 1-400-580-21 s FERRITE, EMI (SMD) D700 8-719-056-48 s DI 1SS388 FB601 1-400-580-21 s FERRITE, EMI (SMD) 5-14 MCC-3000MT...
Page 91
8-759-592-49 s IC TC7SZ125FU(TE85R) IC705 6-704-178-01 s IC TC7SZ08AFE IC706 8-759-592-49 s IC TC7SZ125FU(TE85R) IC1708 8-759-683-80 s IC SN65LVDS1DBVR IC707 6-704-178-01 s IC TC7SZ08AFE IC1709 6-707-863-01 s IC TC74VHC08FT(EKJ) IC710 6-700-108-01 s IC RV5C387A-E2-FB L200 1-469-549-21 s INDUCTOR, CHIP 1.0UH (LB2016) 5-15 MCC-3000MT...
Page 92
Q909 8-729-928-82 s TRANSISTOR DTC144EE-TL L1118 1-456-622-21 s COIL, CHOKE 1UH Q910 8-729-928-28 s TRANSISTOR DTA144EE-TL L1119 1-414-392-41 s INDUCTOR (SMD) 1.0UH Q911 8-729-928-82 s TRANSISTOR DTC144EE-TL Q912 8-729-928-82 s TRANSISTOR DTC144EE-TL L1120 1-456-622-21 s COIL, CHOKE 1UH 5-16 MCC-3000MT...
Page 93
8-729-928-28 s TRANSISTOR DTA144EE-TL R127 1-208-927-81 s RES, CHIP 47K (1005) Q1122 8-729-928-28 s TRANSISTOR DTA144EE-TL R128 1-211-977-91 s RES, CHIP 22 (1608) Q1123 8-729-928-28 s TRANSISTOR DTA144EE-TL R129 1-211-977-91 s RES, CHIP 22 (1608) Q1124 8-729-928-28 s TRANSISTOR DTA144EE-TL 5-17 MCC-3000MT...
Page 94
1-218-823-91 s RES, CHIP 100 (1608) R620 1-218-849-91 s RES, CHIP 1.2K (1608) R410 1-208-903-81 s RES, CHIP 4.7K (1005) R622 1-220-870-81 s RES, CHIP 10 (1005) R411 1-216-864-91 s CONDUCTOR, CHIP (1608) R623 1-218-873-91 s RES, CHIP 12K (1608) 5-18 MCC-3000MT...
Page 95
1-208-935-81 s RES, CHIP 100K (1005) R845 1-211-977-91 s RES, CHIP 22 (1608) R708 1-208-911-81 s RES, CHIP 10K (1005) R846 1-208-887-81 s RES, CHIP 1.0K (1005) R709 1-208-935-81 s RES, CHIP 100K (1005) R847 1-208-887-81 s RES, CHIP 1.0K (1005) 5-19 MCC-3000MT...
Page 96
1-218-875-91 s RES, CHIP 15K (1608) R1083 1-216-864-91 s CONDUCTOR, CHIP (1608) R1014 1-216-864-91 s CONDUCTOR, CHIP (1608) R1084 1-218-895-91 s RES, CHIP 100K (1608) R1015 1-218-871-91 s RES, CHIP 10K (1608) R1085 1-218-919-91 s RES, CHIP 1M (1608) 5-20 MCC-3000MT...
Page 97
1-218-887-91 s RES, CHIP 47K (1608) R1303 1-211-990-91 s RES, CHIP 75 (1608) R1151 1-218-887-91 s RES, CHIP 47K (1608) R1304 1-218-835-91 s RES, CHIP 330 (1608) R1152 1-208-935-81 s RES, CHIP 100K (1005) R1305 1-218-847-91 s RES, CHIP 1.0K (1608) 5-21 MCC-3000MT...
Page 98
1-216-864-91 s CONDUCTOR, CHIP (1608) R2708 1-220-870-81 s RES, CHIP 10 (1005) R1629 1-218-859-91 s RES, CHIP 3.3K (1608) R2709 1-220-870-81 s RES, CHIP 10 (1005) R1630 1-218-859-91 s RES, CHIP 3.3K (1608) R2710 1-220-870-81 s RES, CHIP 10 (1005) 5-22 MCC-3000MT...
Page 99
1-234-380-21 s RES, NETWORK 47K (1005X4) A-1889-787-A s MOUNTED CIRCUIT BOARD, CN-3549 RB1201 1-234-380-21 s RES, NETWORK 47K (1005X4) CN600 1-818-513-21 s CONNECTOR (SQUARE TYPE)(USB)5P RB1202 1-234-380-21 s RES, NETWORK 47K (1005X4) CN601 1-818-513-21 s CONNECTOR (SQUARE TYPE)(USB)5P 5-23 MCC-3000MT...
Page 100
1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C221 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C343 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C222 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C344 1-112-815-91 s CAP, CERAMIC 10MF C (1608) 5-24 MCC-3000MT...
Page 101
1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C532 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C613 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C533 1-128-624-91 s CAP, CERAMIC 330PF B (0603) C614 1-128-627-91 s CAP, CERAMIC 1000PF B (0603) 5-25 MCC-3000MT...
Page 102
1-128-605-91 s CAP, CERAMIC 12PF CH (0603) C736 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C1003 1-114-166-91 s CAP, CERAMIC 0.01MF B (0603) C737 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C1004 1-114-166-91 s CAP, CERAMIC 0.01MF B (0603) 5-26 MCC-3000MT...
Page 103
1-162-964-91 s CAP,CHIP CERAMIC 1000PF B 1608 C1226 1-114-569-11 s CAP, CERAMIC 0.01MF X7R 1608 C1403 1-164-845-81 s CAP, CHIP CERAMIC 5PF CH 1005 C1227 1-112-716-91 s CAP, CERAMIC 0.1UF B (0603) C1404 1-164-845-81 s CAP, CHIP CERAMIC 5PF CH 1005 5-27 MCC-3000MT...
Page 104
1-400-462-21 s FERRITE, EMI (SMD) (1005) IC503 8-759-592-49 s IC TC7SZ125FU(TE85R) FB500 1-400-462-21 s FERRITE, EMI (SMD) (1005) IC504 8-759-592-49 s IC TC7SZ125FU(TE85R) FB501 1-400-462-21 s FERRITE, EMI (SMD) (1005) IC802 8-759-592-49 s IC TC7SZ125FU(TE85R) FB502 1-400-462-21 s FERRITE, EMI (SMD) (1005) 5-28 MCC-3000MT...
Page 105
R244 1-220-878-81 s RES, CHIP 22 (1005) Q1200 6-550-119-01 s TRANSISTOR DTC144EMFS6T2L R245 1-220-878-81 s RES, CHIP 22 (1005) R246 1-220-878-81 s RES, CHIP 22 (1005) Q1201 8-729-929-27 s TRANSISTOR DTC114TE-TL R247 1-220-878-81 s RES, CHIP 22 (1005) 5-29 MCC-3000MT...
Page 106
1-240-676-91 s RES, CHIP 22 (0603) R437 1-240-705-91 s RES, CHIP 6.8K (0603) R369 1-240-676-91 s RES, CHIP 22 (0603) R438 1-240-808-91 s RES, CHIP 10K (0603) R370 1-240-676-91 s RES, CHIP 22 (0603) R439 1-240-820-91 s RES, CHIP 33K (0603) 5-30 MCC-3000MT...
Page 107
1-240-676-91 s RES, CHIP 22 (0603) R922 1-240-706-91 s RES, CHIP 8.2K (0603) R712 1-240-759-91 s RES, CHIP 91 (0603) R923 1-240-706-91 s RES, CHIP 8.2K (0603) R713 1-240-759-91 s RES, CHIP 91 (0603) R924 1-240-706-91 s RES, CHIP 8.2K (0603) 5-31 MCC-3000MT...
Page 108
1-240-748-91 s RES, CHIP 33 (0603) R1205 1-240-714-91 s RES, CHIP 47K (0603) R1007 1-240-748-91 s RES, CHIP 33 (0603) R1206 1-240-718-91 s RES, CHIP 100K (0603) R1008 1-240-776-91 s RES, CHIP 470 (0603) R1207 1-240-705-91 s RES, CHIP 6.8K (0603) 5-32 MCC-3000MT...
Page 109
1-234-380-21 s RES, NETWORK 47K (1005X4) R1439 1-208-887-81 s RES, CHIP 1.0K (1005) R1440 1-208-887-81 s RES, CHIP 1.0K (1005) S1300 1-692-270-41 s SWITCH, SLIDE R1441 1-208-880-81 s RES, CHIP 510 (1005) R1446 1-208-892-81 s RES, CHIP 1.6K (1005) 5-33 MCC-3000MT...
Page 110
8-719-820-42 s DIODE 1SS302-TE85L D306 8-719-820-42 s DIODE 1SS302-TE85L C400 1-135-960-91 s CAP, CHIP CERAMIC 10MF B(3225) D307 8-719-820-42 s DIODE 1SS302-TE85L C402 1-114-582-91 s CAP, CERAMIC 0.1MF B 1005 D308 8-719-820-42 s DIODE 1SS302-TE85L C403 1-100-581-81 s CAP,CHIP CERAMIC0.0047MF B1005 5-34 MCC-3000MT...
Page 111
1-218-990-81 s CONDUCTOR, CHIP (1005) R117 1-208-871-81 s RES, CHIP 220 (1005) JC185 1-218-990-81 s CONDUCTOR, CHIP (1005) JC186 1-218-990-81 s CONDUCTOR, CHIP (1005) R118 1-208-871-81 s RES, CHIP 220 (1005) R119 1-208-871-81 s RES, CHIP 220 (1005) 5-35 MCC-3000MT...
Page 112
1-803-974-21 s VARISTOR, CHIP (1608) R326 1-208-887-81 s RES, CHIP 1.0K (1005) VDR202 1-803-974-21 s VARISTOR, CHIP (1608) R327 1-208-887-81 s RES, CHIP 1.0K (1005) VDR203 1-803-974-21 s VARISTOR, CHIP (1608) R328 1-208-927-81 s RES, CHIP 47K (1005) 5-36 MCC-3000MT...
Page 113
1-114-965-11 s CAP, CERAMIC 4.7MF X7R (3225) 8-729-922-63 s TRANSISTOR 2SD1760F5-TLR C017 1-112-777-11 s CAP, CERAMIC 0.01MF X7R 1005 8-729-922-63 s TRANSISTOR 2SD1760F5-TLR 8-729-922-63 s TRANSISTOR 2SD1760F5-TLR C018 1-114-868-11 s CAP, CERAMIC 0.1MF X7R 1608 C019 1-114-868-11 s CAP, CERAMIC 0.1MF X7R 1608 5-37 MCC-3000MT...
Page 114
1-125-777-81 s CAP, CHIP CERAMIC 0.1MF B 1005 R013 1-208-915-81 s RES, CHIP 15K (1005) R014 1-208-915-81 s RES, CHIP 15K (1005) C115 1-125-777-81 s CAP, CHIP CERAMIC 0.1MF B 1005 R015 1-208-915-81 s RES, CHIP 15K (1005) 5-38 MCC-3000MT...
Page 115
1-164-874-81 s CAP,CHIP CERAMIC 100PF CH 1005 C206 1-114-582-91 s CAP, CERAMIC 0.1MF B 1005 L110 1-469-555-21 s INDUCTOR, CHIP 10UH (LB2016) L112 1-469-555-21 s INDUCTOR, CHIP 10UH (LB2016) C207 1-114-582-91 s CAP, CERAMIC 0.1MF B 1005 L200 1-469-555-21 s INDUCTOR, CHIP 10UH (LB2016) 5-39 MCC-3000MT...
Page 116
1-208-919-81 s RES, CHIP 22K (1005) R179 1-218-990-81 s CONDUCTOR, CHIP (1005) R180 1-218-990-81 s CONDUCTOR, CHIP (1005) R181 1-208-919-81 s RES, CHIP 22K (1005) R182 1-208-911-81 s RES, CHIP 10K (1005) R183 1-208-911-81 s RES, CHIP 10K (1005) 5-40 MCC-3000MT...
5-4. Supplied Accessories Q'ty Part No. SP Description 2pcs 4-142-779-01 s ADAPTOR,TRIPOD 4-430-311-01 s MANUAL, INSTRUCTION (JAPANESE) 4-430-311-11 s MANUAL, INSTRUCTION (ENGLISH) 4-430-311-21 s MANUAL, INSTRUCTION (GERMAN) 4-430-313-01 s MASTER CD 8pcs 7-682-546-09 s SCREW +B 3X5 5-41 MCC-3000MT...
Page 154
R445 004-Q2 DP_FLASH_CTL 100k DU:8 Low:WAITE. IT can be configured to be asserted H or L IC405 (2/2) TC7SZ08AFE DP_+2.5V IC404 (2/2) TC7SZ04FU(TE85R) C423 0.1uF T-ONE Power T-ONE Sdram Flash LCD Connector DPR-340 (4/14) BOARD NO. 1-885-309-11 DPR-340_4 7-34 MCC-3000MT...
CABLE (45 CORE) CN-3534 AVP-18 FLEXIBLE FLAT CABLE (24 CORE) RE-309 CN-3550 SUB HARNESS (AVP-RE) CN900 For MAINTENANCE CN600 CAMERA A MODULE SUB HARNESS (KY-AVP-CN) For MAINTENANCE CN601 CAMERA B MODULE For MAINTENANCE CN602 KY BOARD CN-3549 Frame Wiring 7-62 MCC-3000MT...