Wireless Speaker
Reference Guide
SRS-XP700 / SRS-XP500
©2021 Sony Corporation
Printed in China
https://www.sony.net/
English
Wireless Speaker
Before operating the unit, please read this guide thoroughly and retain it for future reference.
Please access the following URL and read the contents of the END USER LICENSE AGREEMENT.
https://rd1.sony.net/help/speaker/el21/en2/
CAUTION
To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do
not place objects filled with liquids, such as vases, on the apparatus.
Do not expose the appliance to naked flame sources (for example, lighted candles).
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible
AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet
immediately.
The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit
itself has been turned off.
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire
or the like for a long time. Do not subject the batteries to extreme low temperature conditions that may
result in overheating and thermal runaway. Do not dismantle, open or shred secondary cells or batteries.
In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact
has been made, wash the affected area with copious amounts of water and seek medical advice.
Secondary cells and batteries need to be charged before use. Always use the correct charger and refer
to the manufacturer's instructions or equipment manual for proper charging instructions. After
extended periods of storage, it may be necessary to charge and discharge the cells or batteries several
times to obtain maximum performance. Dispose of properly.
Do not place this product close to medical devices
This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable
shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to
persons who use such medical devices. Consult your doctor before using this product if you use any
such medical device.
This equipment has been tested and found to comply with the limits set out in the EMC regulation using
a connection cable shorter than 3 meters.
Caution on charging
Inserting the USB plug or AC plug while it is wet may cause a short
circuit due to foreign matter or liquid (tap water, salt water, soft
drinks, etc.) getting on the main unit or charging cable. This may
cause malfunctions or abnormal overheating.
Never insert the USB plug or AC plug while the main
unit or charging cable is wet.
5-029-150-12(1)
Precautions
On safety
• Completely disconnect the AC power cord (mains lead) from the AC outlet (mains) if it is not going to
be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull
the cord itself.
On placement
• To eliminate the risk of malfunctions, avoid the following locations when placing or leaving this unit.
– A place subject to high temperatures, such as under direct sunlight or lighting equipment, near a
heat source, or in a sauna
– Inside a vehicle with the windows closed (especially in summertime)
– A place subject to excessive dust
– A place subject to strong vibration
• Place this unit on a flat, level surface. When placed on a sloped surface, the unit may fall over or fall
off the surface due to its own vibration, resulting in injuries, malfunctions, or performance
degradation.
• Depending on the conditions where this unit is placed, it may fall over or fall off the surface. Do not
leave any valuables near the unit.
• This unit is not anti-magnetic. Keep objects susceptible to magnetism (recorded tapes, watches, cash
cards and credit cards with magnetic coding, etc.) away from the unit. When you carry around the
unit, keep this in mind as well.
Others
• If you use this unit for a long time, the temperature of this unit may rise, but it is not a malfunction.
• Do not use or leave the unit in an extremely cold or hot environment (temperature outside the range
of 5 °C – 35 °C). If the unit is used or left in outside the above range, the unit may automatically stop to
protect internal circuitry.
• At high temperature, the charging may stop or the volume may reduce to protect the battery.
• Even if you do not intend to use the unit for a long time, charge the battery to its full capacity once
every 6 months to maintain its performance.
On Copyrights
• Android, Google Play and other related marks and logos are trademarks of Google LLC.
• LDAC™ and LDAC logo are trademarks of Sony Corporation.
• Windows Media is either a registered trademark or trademark of Microsoft Corporation in
the United States and/or other countries.
• This product is protected by certain intellectual property rights of Microsoft Corporation. Use or
distribution of such technology outside of this product is prohibited without a license from Microsoft
or an authorized Microsoft subsidiary.
• The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Sony Corporation is under license.
• Apple, the Apple logo, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and
other countries.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
• Use of the Made for Apple badge means that an accessory has been designed to connect specifically
to the Apple product(s) identified in the badge, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with an Apple product may affect wireless performance.
• Other trademarks and trade names are those of their respective owners.
• ™ and ® marks are omitted in the documents.
Water resistant performance of the unit
The unit, with the cap closed securely, has a water resistant specification of IPX4*
"Degree of protection against splashing water" of the IEC60529 "Ingress Protection Rating (IP Code)*
However, the unit is not completely waterproof. Do not drop the unit into hot water in a bathtub or
purposely use it in water.
Liquids that the water resistant performance specifications apply to
Applicable
Not applicable
*
1
IPX4 (Degree of protection against splashing water): Protected against water splashing from any
direction.
2
*
The supplied accessories and the connectors of this unit (AC IN/USB/AUDIO IN/MIC/GUITAR) are not
water resistant. To reduce the risk of fires or electric shocks, do not expose the unit to water or
droplets while using any connectors (AC IN/USB/AUDIO IN/MIC/GUITAR). Do not place a vase or any
other liquid-filled container on the unit.
The water resistant performance of the unit is based on our measurements under the conditions
herein described. Note that malfunctions as a result of water immersion caused by misuse by the
customer are not covered by the warranty.
To avoid the deterioration of the water resistant performance
Check the following and use the unit correctly.
• This unit does not have a design that is resistant to water pressure. Do not put the unit in the water or
directly under the water gushing out of the faucet to avoid a malfunction.
• Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on the
unit directly. Also never use the unit in a place subject to high temperatures, such as in a sauna or
near a heat source.
• Handle the cap with care. The cap plays a very important role in maintenance of the water resistant
performance. When using the unit, make sure that the cap is closed completely. When closing the
cap, be careful not to allow foreign objects inside. If the cap is not closed completely the water
resistant performance may deteriorate and may cause a malfunction of the unit as a result of water
entering the unit.
How to care for the unit when wet
Be sure to wipe off the moisture after using the unit. If the unit is left wet, it may be soiled by water
stains, molds, or the like.
The sound quality may change when water enters the speaker section of the unit. This, however does
not indicate a malfunction.
Wipe off the moisture on its surface, and put the unit on a dry soft cloth to drain the collected water
inside the unit. Then, dry the unit in an airy place until no moisture remains.
Note
• Clean this unit with a soft cloth slightly moistened with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol.
• Especially in cold regions, be sure to wipe off the moisture after using the unit. Leaving moisture on
its surface may cause the unit to freeze and malfunction.
Notes on water resistant feature
(Read before using the unit)
fresh water, tap water, pool water
liquids other than the above (soapy water, water with detergent or bath agents,
shampoo, hot spring water, salt water, etc.)
1
as specified in
2
."
Cap