hit counter script
Makita AN923 Instruction Manual

Makita AN923 Instruction Manual

Pneumatic framing nailer
Hide thumbs Also See for AN923:

Advertisement

Quick Links

INSTRUCTION MANUAL
Pneumatic Framing Nailer
AN923
AN943
007004
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Summary of Contents for Makita AN923

  • Page 1 INSTRUCTION MANUAL Pneumatic Framing Nailer AN923 AN943 007004 IMPORTANT: Read Before Using.
  • Page 2: Specifications

    EC Declaration of Conformity Sound power level (L ) : 105 dB(A) Makita Corporation responsible Uncertainty (K) : 3 dB(A) manufacturer declare that the following Makita machine(s): Wear ear protection Designation of Machine: Pneumatic Framing Nailer ENG904-1 Vibration Model No./ Type: AN923,AN943...
  • Page 3: Important Safety Instructions

    • Tomoyasu Kato Always assume that the tool contains Director fasteners. Makita Corporation Do not point the tool toward yourself or 3-11-8, Sumiyoshi-cho, anyone whether it contains fasteners or not. Anjo, Aichi, 446-8502, JAPAN Do not activate the tool unless the tool is placed firmly against the workpiece.
  • Page 4 Do not modify tool without authorization from • vehicles and wagons. Makita. Do not permit those uninstructed to use the tool. Ask Makita's Authorized service centers for • • Make sure no one is nearby before nailing. Never periodical inspection of the tool.
  • Page 5: Installation

    ft.) is recommended when the interval between SAVE THESE INSTRUCTIONS. each nailing is 0.5 seconds. Air supply hoses shall have a minimum working pressure rating of 1.03 INSTALLATION MPa (10.3 bar) or 150 percent of the maximum pressure produced in the system whichever is Selecting compressor higher.
  • Page 6: Functional Description

    Installing the hook FUNCTIONAL DESCRIPTION 1. Hook CAUTION: Always lock the trigger and disconnect the hose • before adjusting or checking function on the tool. Nose adapter (Accessory) CAUTION: Always lock the trigger and disconnect the hose • before installing or removing the nose adapter. 007062 When nailing workpieces with easily-marred surfaces, CAUTION:...
  • Page 7: Operation

    OPERATION 1. Pusher CAUTION: Make sure all safety systems are in working order • before operation. To drive a nail, you may place the contact element against the workpiece and pull the trigger, or 007008 Pull the pusher lever to the rear to engage the pusher to the last nail.
  • Page 8: Maintenance

    Nails 1. Continuous nailing 2. Trigger lock Nail 3. Lock lever 4. Intermittent nailing 007014 Anti dry fire mechanism 004310 This tool is equipped with an anti dry fire mechanism. Handle nail coils and their box carefully. If the nail coils When there are a few nails remaining in the magazine, have been handled roughly, they may be out of shape or the contact arm will be locked in the undepressed...
  • Page 9 Maintenance of the compressor, air set and air hose 1. Drain cock 007016 Make sure that the trigger is locked when the change lever is set to the position. 004317 1. Trigger lock 1. Air filter 2. Change lever 007017 004318 When the tool is not to be used for an extended period of After operation, always drain the compressor tank and...
  • Page 10: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nails • Air hoses • Safety goggles •...
  • Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884653C227...

This manual is also suitable for:

An943

Table of Contents