LG LX54 SERIES Installation Manual
Hide thumbs
Also See for LX54 SERIES:
- Instruction manual (55 pages) ,
- Installation manual (54 pages) ,
- Manual (41 pages)
Related Manuals for LG LX54 SERIES
Summary of Contents for LG LX54 SERIES
- Page 1 INSTALLATION MANUAL LED TV* Please read this manual carefully before operating your set and retain it for future reference. LX54** LX34** LX33** LX32** LX53** LX30** www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS DIGITAL SIGNAGE MEDIA SPEAKER OUTPUT SETUP PLAYER Digital Signage Media Player Overview HCEC SETUP EZ MANAGER NO SIGNAL IMAGE EZ-Manager 2.1 - Introduction EZ-MANAGER WIZARD WELCOME VIDEO EZ-Manager Wizard - Automatically for Setup NTP TIMER SYNC EZ-Manager Wizard - Automatically for Setup (USB Configuration) EZ-Manager Wizard - Manually for Setup... -
Page 3: Digital Signage Media Player
DIGITAL SIGNAGE MEDIA PLAYER DIGITAL SIGNAGE MEDIA PLAYER Digital Signage Media Player Overview (* Only for LX5**S series) The Digital Signage Media Player can play content produced and distributed by SuperSign Elite-W. Supported content types consist of photographs, videos, external inputs such as TV broadcasts, texts,and music. -
Page 4: Ez Manager
EZ MANAGER / EZ-MANAGER WIZARD EZ MANAGER (*Only for LX5**H, LX3**H series) EZ-Manager 2.1 - Introduction The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain “procentric.local”... -
Page 5: Ez-Manager Wizard - Automatically For Setup
EZ-MANAGER WIZARD EZ-Manager Wizard - Automatically for Setup y Image shown may differ from your TV. Select a Label and/or enter the Room Number using the numeric keypad on the remotes. To continue, Next move and select ‘ ’. This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data channel, Next select the “... -
Page 6: Ez-Manager Wizard - Automatically For Setup (Usb Configuration)
Current : 02.00.00.01 EPK : 02.00.00.01 [LOGO] 1360X768.jpg [ Forced Update Option ] [EPK] M1A_DVB_CN_RevNo1901_V02.0... SPI Boot LG Boot Logo LG Boot Logo LG Boot Logo Apply Previous Downloading the software/jpeg/TLL fi les takes few minutes. After the installation is completed, turn off. -
Page 7: Ez-Manager Wizard - Manually For Setup
EZ-MANAGER WIZARD EZ-Manager Wizard - Manually for Setup y Image shown may differ from your TV. Select a Label and/or enter the Room Number using the numeric keypad on the remotes. To continue, move and select ‘Next’. Please select the ‘Manual Pro:Centric’. Select the Pro:Centric Mode “GEM”... - Page 8 EZ-MANAGER WIZARD Downloading the Pro:Centric application files takes few minutes. After the installation is completed, the following screen will be displayed.
-
Page 9: Installation Menu
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. -
Page 10: Introduction
S/W : 02.00.00.01 Micom : 0.00.84 Previous Use the button to select the LG Hotel Mode Setup. Use the OK button and then button to select Hotel Mode Operation. *When ‘Hotel Mode Operation’ is set to Yes(Work), all functions of Hotel Mode apply. - Page 11 Operation’ and ‘Local Key Operation’ will be worked by below. - IR Operation Decide whether work the LG remote control or not. y Able to set Normal, Use PWR Only, Block All. y When ‘IR Operation’ is set to Block All, all normal remote keys don’t work. Use PWR Only (Block except power) makes block all remote keys except power key.
- Page 12 INSTALLATION MENU • Power On Status • Power On Status ◄ ► ◄ ► • Key Operation • Key Operation ◄ ► ◄ ► • IR Operation • IR Operation Block All Block All ◄ ► ◄ ► • Local Key Operation •...
- Page 13 INSTALLATION MENU - OSD Display Decide to display OSD or not by setting ‘OSD Display’ as Yes(Display) or No(Do not Display). y When ‘OSD Display’ is set to ‘No’(Do not Display), all OSD is not displayed except some exception. y Although select ‘No’ (Do not Display), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’...
- Page 14 INSTALLATION MENU - Programme Select start channel number if Input source’s value is TV. (in case of ATV, it means physical channel number.) - A/V Setting If ‘A/V Setting’ is changed from ‘No’ to ‘Yes’, parameters that are set before entering ‘Installation Menu’...
- Page 15 INSTALLATION MENU Radio Video Blank Manage video blank channel(sound only). This feature affects on analog channel (ATV) only. - Start PR. No. y Start channel number to video blank. y Available programme to set are 0~199(For Taiwan : TV 2~69, CATV 1~199). - No.
- Page 16 INSTALLATION MENU Public Display Settings / LG Hotel Mode Setup (Value Range Table) Item Enable Disable Initail Hotel Mode Operation Power On Status *STD Volume Start Volume Off, Minimum Volume ~ Maximum Volume Maximum Volume Minimum Volume ~ 100 Minimum Volume...
- Page 17 INSTALLATION MENU LG Hotel Mode Setup (Value Range Table) Item Enable Disable Initail Aux Source Setting Input Source Aux Input(AV1 ~ MAX_INPUT) Settng Enable Disable Enable Radio Name Display Radio Video Blank Start PR. No. 0 ~ 199 (Taiwan TV 2 ~ 69 / CATV 1 ~ 199) No.
-
Page 18: Tv Manager
Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup... -
Page 19: Usb Cloning
Select the EPK option (software update) and then use the green and yellow buttons to download either SPI Boot or LG Boot Logo. If you checked the LG Boot Logo checkbox, then the Splash image, if selected, will be unchecked. Also, if you select the LG Boot Logo and proceed with the download, the existing Splash image will be deleted. -
Page 20: Receive From Usb
Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup... - Page 21 TV MANAGER Use the button to select the USB and Receive from USB and press the OK button. * Below explains the naming rules for .TTL files. The supported model line will be in the name of the file but the screen size will be listed as “xx”. This allows TVs having the same chassis model number to use the same ‘*.TTL’...
-
Page 22: Send To Usb
Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup... -
Page 23: Logo Image Download
N (PC) Use the button to select the TV Manager option and then press the OK button. CABLE IN Installation Menu (V 3.0) 2C IN LG Hotel Mode Setup & SERVICE) TV Manager Password Change Set ID Setup Configuration Setup... -
Page 24: Diagnostics Setup
It checks and records good and bad channel signals, and then provides the signal information to a USB storage device in XML file format. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change... - Page 25 TV MANAGER Overview Diagnostics 1. It provides status information of the TV and information about the current input in XML file format. (There are two kinds of information. There is information which is extracted regardless of the model, such as the model name or boot version, and there is information which is available depending on the model, such as the micom version, PTC version, etc.).
-
Page 26: Password Change
Image shown may differ from your TV. - The changed password is applied to the ‘extra contents’ password. (*Only for LX5**H, LX3**H series) Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Password Change Set ID Setup... -
Page 27: Set Id Setup
SET ID SETUP SET ID SETUP Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup Set ID setup Set ID Lock ◄ ► Configuration Setup Set ID Multi Timer Previous Lock Mode External Speaker... -
Page 28: Configuration Setup
CONFIGURATION SETUP CONFIGURATION SETUP y Image shown may differ from your TV. Installation Menu (V 3.0) LG Hotel Mode Setup Configuration Setup TV Manager Number of RCU Password Change Splash Offset Time Set ID Setup ◄ ► USB Auto Playback... - Page 29 The video signal will be transmitted through HDMI to be displayed on the screen in standard quality. Screen Saver Cube y When ‘Screen Saver Cube’ is set to ‘No’, TV will do not display LG Screen Cube. One Channel Map y If 'One Channel Map' is 'YES', the TV will operate as below.
-
Page 30: Multi Timer
MULTI TIMER MULTI TIMER Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Multi Timer Set ID Setup Multi Timer ◄ ► Configuration Setup On Timer Multi Timer Multi Timer Off Timer Lock Mode External Speaker Previous... -
Page 31: Lock Mode
LOCK MODE LOCK MODE Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Lock Mode Password Change Set ID Setup Enable Data Service ◄ ► Configuration Setup Enable ◄ ► Multi Timer Factory Reset Enable ◄ ► Lock Mode... -
Page 32: External Speaker
EXTERNAL SPEAKER EXTERNAL SPEAKER (* Except for LX30* C series) Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Password Change Set ID Setup External Speaker Configuration Setup Fixed ◄ ► Volume Control Multi Timer 1 Watt Output Lock Mode... -
Page 33: Speaker Output Setup
SPEAKER OUTPUT SETUP SPEAKER OUTPUT SETUP y Connect the external speaker to the external speaker out jack on the TV. EXTERNAL SPEAKER OUT RIGHT LEFT NOTE External speaker must be used three plug(SE : Single Ended, Stereo) as shown in the drawings and external speaker fully inserted with external Speaker Jack. -
Page 34: Hcec Setup
HCEC SETUP HCEC SETUP Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager HCEC Setup Password Change CEC Mode Default Set ID Setup ◄ ► Configuration Setup IR Decoding Multi Timer Device ID Lock Mode StandBy External Speaker HTNG HotelMode... -
Page 35: No Signal Image
S/W : 00.02.00.01 Micom : 0.00.32 y This feature allows you to display an image you have stored on the TV instead of the LG Cube when there is no signal due to DTV signal attenuation, external device failure, or cable removal. -
Page 36: Welcome Video
WELCOME VIDEO WELCOME VIDEO Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Welcome Video Password Change Set ID Setup Welcome Video Disable ◄ ► Configuration Setup Video Reset Confirm Multi Timer Lock Mode Previous External Speaker HCEC Setup... -
Page 37: Ntp Timer Sync
Image shown may differ from your TV. y This feature allows you to receive time information via NTP(Network Time Protocol) Time Server to set current clock. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager NTP TimerSync Password Change... -
Page 38: Network Setup
NETWORK SETUP NETWORK SETUP (* Only for LX5**S series) y Image shown may differ from your TV. Installation Menu (V 3.0) LG Hotel Mode Setup TV Manager Network Setup Password Change Set ID Setup Network Setting Press OK Configuration Setup... -
Page 39: Pro:centric
PRO:CENTRIC PRO:CENTRIC (* Only for LX5**H, LX3**H series) y Image shown may differ from your TV. Installation Menu (V 3.0) LG Hotel Mode Setup Pro:Centric TV Manager Mode Flash Password Change ◄ ► WORF Set ID Setup Configuration Setup Room Number Setting... -
Page 40: Power Saving
PRO:CENTRIC / POWER SAVING RF Type y Sets the RF modulation type to DVB-T or DVB-C. The default value is DVB-T. RF Freq.(kHz) y Sets the RF frequency at which the Pro:Centric data is received. y Frequency tolerance : start frequency~end frequency for each country y If the RF Type is DVB-T, it can be changed in the range of 47000~890000. -
Page 41: Clock Setup
PRO:CENTRIC / CLOCK SETUP y Static Saving : It is the item for setting the level to reduce the backlight control from the items for saving the consuming power, which is increased or decreased by 10 steps from 0 to 100. 100 makes the consuming power set to the same one from the TV. -
Page 42: Download Extra Contents
CLOCK SETUP / DOWNLOAD EXTRA CONTENTS y Program/Frequency : Select the program number or frequency to get the time information when tuning on TV. If the current setting for clock source is ‘DTV’, you can get the clock information when selecting the decided source and program. - Page 43 DOWNLOAD EXTRA CONTENTS /DVI IN (RGB) E E G I P T COMPONENT AUDIO IN OPTICAL (COMPONENT/RGB/DVI) AUDIO OUT S AVI G Q.VIEW SPEAKER LIST ANTENNA/ RGB IN (PC) CABLE IN MY MEDIA RS-232C IN (CONTROL & SERVICE) G I E Movie List Photo List Music List...
- Page 44 DOWNLOAD EXTRA CONTENTS MENU INPUT To stop playing the Application file y Change Mode other than Flash or GEM under Pro:Centric in Installation Menu. y When you change the Mode, the downloaded content is deleted from the memory. NOTE y When playing the Application file(FLASH or GEM file), the buttons are controlled according to the settings of the Extra Contents option.
-
Page 45: Supersign Server Setup
SUPERSIGN SERVER SETUP SUPERSIGN SERVER SETUP (* Only for LX5**S series) Installation Menu (V 3.0) TV Manager Password Change Set ID Setup Configuration Setup SuperSign Server Setup Multi Timer Play Name Press OK Lock Mode Server IP Setting Press OK External Speaker Server IP Status Not connected... -
Page 46: Ir Codes
IR CODES IR CODES SETTINGS Remote control Button Q.MENU Remote control Button INFO Remote control Button This feature is not available for all models. EXIT Remote control Button Remote control Button Code BACK Function Note (Hexa) Remote control Button Remote control Button (Power Remote control Button On/Off) (POWER) -
Page 47: External Control Device Setup
EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL Type of Connector : D-Sub 9-Pin Male DEVICE SETUP RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. -
Page 48: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Command Reference List 3-Wire Configurations (Not standard) (Depending on Model) DATA COMMAND1 COMMAND2 (Hexadecimal) 01. Power 00 to 01 02. Aspect (See p. Ratio 03. Screen (See p. Mute 04. Volume 00 to 01 D-Sub 9 D-Sub 9 Mute 05. -
Page 49: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP OK Acknowledgement 16. Auto Configura- [Command2][ ][Set ID][ ][OK][Data][x] tion (See p. 17. Equal- * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data (See p. - Page 50 EXTERNAL CONTROL DEVICE SETUP 02. Aspect Ratio (Command: k c) 05. Volume Control (Command: k f) (Main Picture Size) ► To adjust volume. ► To adjust the screen format. (Main picture You can also adjust volume with the volume format) You can also adjust the screen format buttons on remote control.
- Page 51 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 13. Balance (Command: k t) ► To adjust the screen tint. ► To adjust balance. You can also adjust tint in the PICTURE menu. You can also adjust balance in the AUDIO menu.
- Page 52 EXTERNAL CONTROL DEVICE SETUP 16. Auto Configure (Command: j u) (Only RGB Data02 : [Antena] support model) 0x00 : Analog Main 0x10 : DTV Main ► To adjust picture position and minimize image 0x20 : Radio shaking automatically. It works only in RGB (PC) mode.
- Page 53 EXTERNAL CONTROL DEVICE SETUP 22. Input select (Command: x b) * Real data mapping (Main Picture Input) 00 : Step 0 ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Step 10 (Set ID 10) Data Structure Step 15 (Set ID 15) 10 :...