Removing The System From The Rack; Removing The System; Figure 1-6. Removing The Cable Tray - Dell 4200 Installation Manual

Dell poweredge 4200 servers: installation guide

Hide thumbs Also See for 4200:

Table of Contents

1-8

Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

Removing the System From the Rack

The subsections that follow include instructions for removing the system from the

rack and removing the rails and other hardware associated with the rack installation

of the system.

To remove the system from the rack, perform these steps.

WARNING: If you are removing more than one system, first remove the

system in the highest position. Never pull more than one system out of the

rack at a time.

Slide the system out of the rack until the slides lock in the extended position.

WARNING: Because of the size and weight of the system, never attempt to

remove the system from the slide assemblies by yourself.

Press the green button near the end of each interior slide to release the slide

locks (see Figure 1-7), and then slide the system completely out of the rack.

back of computer

cable tray

6-32 x 0.25-inch screws (5)

Table of Contents