Epson Stylus CX5000 Parts Memory card slots Output tray and extension Left edge guide Memory card cover USB external device connector (camera only) Control panel (button and lights) Document cover Document table Accessories Ink Cartridges Color Black Paper support extension...
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other products may cause damage to your printer not covered by Epson’s warranty. Do not use an ink cartridge if the date on the package has expired.
Page 3
(maximum) Interface One USB 2.0 Hi-Speed or USB 1.1 port Light source RGB three color LED Epson Stylus CX5000 Series Mechanical Paper path Sheet feeder, top entry Sheet feeder capacity About 100 sheets at 17 lb (64 g/m²) Dimensions Width: 16.9 inches (430 mm) Depth: 13.9 inches (354 mm)
Epson Stylus CX5000 Series MagicGate Memory Stick Duo* ™ Microdrive ™ (Secure Digital) SDHC ™ miniSD miniSDHC* microSD* microSDHC* MultiMediaCard xD-Picture Card xD-Picture Card Type M xD-Picture Card Type H Voltage 3.3 V requirements Maximum current is 500 mA Adapter required...
Page 5
However, for the best results, you’ll want to use one of Epson’s special ink jet papers designed for your printer. For example, your photos will look great printed on Epson Ultra Premium Photo Paper Glossy (see page 1 for more information).
❏ The correct envelope size as the Size or Paper Size setting ❏ as the Orientation setting Landscape Paper Loading Capacity When loading Epson ink jet papers, follow these capacity guidelines: Paper type Epson Premium Bright White Paper Epson Ultra Premium Photo Paper Glossy...
2. Place the document on the glass as described to the left. Be sure to close the document cover. 3. Load up to 100 sheets of letter-size plain paper (see page 4 if you need instructions.) Epson Stylus CX5000 Series 4. Press the button until you see Copies the desired number of copies in the window.
Epson Stylus CX5000 Series To make a black and white copy, press the x button. light flashes and after a moment the CX5000 Series starts printing. If you need to stop copying at any time, just press the button. Do not pull out paper that is being printed; it will be ejected automatically to the output tray.
Page 9
4. Load up to 100 sheets of plain paper or up to 20 sheets of photo or matte paper at a time (see page 4 for details). You can load more paper later as necessary to print all your selected photos. 6/06 Epson Stylus CX5000 Series good:...
If your camera is not supported, a flashing P appears in the Copies window, and the b Error light and the Print All/PictBridge flash. Epson cannot guarantee the compatibility of any camera. Depending on the CX5000 Series settings and your digital camera settings, some combinations of paper type, size, and layout may not be supported.
Page 11
™ as ArcSoft PhotoImpression —using EPSON Scan. Or you can start EPSON Scan directly from your computer and save your image to a file. 1. Open the document cover and place your original face- down on the glass, in the upper left corner.
1. Place your original photo on the scanner as described on page 6. 2. Start EPSON Scan. See page 11 for instructions: 3. When the EPSON Scan window appears, do one of the following, depending on the currently selected scan mode: ❏ Home or Professional Mode: go to step 4.
If the quality doesn’t improve after cleaning and aligning the print head, you can replace the cartridge even if it is not low. Epson Stylus CX5000 Series Checking the Ink Supply To check your ink supply, do the following: ❏...
Page 14
Leave the expended cartridge installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. To ensure good results, use genuine Epson ink cartridges and do not refill them. Other products may cause damage to your CX5000 Series not covered by Epson’s warranty.
Page 15
Do not remove any other seals from the cartridges. Epson Stylus CX5000 Series 9. Place the new ink cartridge into the cartridge holder and push it down until it clicks into place.
Epson Stylus CX5000 Series Aligning the Print Head If your printouts look grainy or blurry, or you see light or dark horizontal banding, you may need to align the print head. Note: Banding may also occur if your cartridges are low on ink or you need to clean the print head.
CX5000 Series, and turn it on. If you notice a decline in print quality, clean the print head (see page 12); if output is misaligned, align the print head (see page 16). Epson Stylus CX5000 Series Related Documentation CPD-21811 Epson Stylus CX5000 Series...