hit counter script
Velleman VTSSD4 User Manual
  1. Manuals
  2. Brands
  3. Velleman Manuals
  4. Rework stations
  5. VTSSD4
  6. User manual
Velleman VTSSD4 User Manual

Velleman VTSSD4 User Manual

Multi-function smd rework station 100 w / 600 w
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VTSSD4
MULTI-FUNCTION SMD REWORK STATION 100 W / 600 W
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Velleman VTSSD4

Summary of Contents for Velleman VTSSD4

  • Page 1 VTSSD4 MULTI-FUNCTION SMD REWORK STATION 100 W / 600 W USER MANUAL...
  • Page 2 VTSSD4 V. 01 – 15/05/2014 ©Velleman nv...

  • Page 3: Safety Instructions

    If in doubt, contact your local waste disposal authorities. Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and contact your dealer.

  • Page 4: General Guidelines

    VTSSD4 General Guidelines Refer to the Velleman® Service and Quality Warranty on the last pages of this manual. Keep this device away from dust and extreme temperatures. Make sure the ventilation openings are clear at all times. Protect this device from shocks and abuse. Avoid brute force when operating the device.
  • Page 5 VTSSD4 Leaded solder Lead-free solder Melting point 215 °C (419 °F) 220 °C (428 °F) Normal operation 270–320 °C (518–608 °F) 300–360 °C (572–680 °F) Production line operation 320–380 °C (608–716 °F) 360–410 °C (680–770 °F) A good joint is assured if the iron's operating temperature is set within the parameters suitable for the type of solder being used.

  • Page 6: Installation

    VTSSD4 hot air function UP button (▲) to increase temperature SET button DOWN button (▼) to decrease temperature UP button (▲) to increase airflow temperature display airflow display heating indication DOWN button (▼) to decrease airflow Installation Installing the Fume Extractor This device comes with a fume extractor.

  • Page 7: Switching On And Off

    VTSSD4 Switching On and Off  To switch the device on, set the power switch [1] in the on position (1). The switch lights up. The device activates all functions (soldering, desoldering, and hot air) and starts heating up. The heating indications [10,15,20] light up during warming up.
  • Page 8 VTSSD4 There are 3 ways to exit sleep mode: Soldering iron: shake it gently. Desoldering iron: press the suction button on the iron. Press any button under the flashing display. Switch the station off and on again. In power off mode, the display flashes and shows “— — —”. To start the iron again, press the ▼ button, or switch the station off and on again.
  • Page 9 VTSSD4 Tip Maintenance  The soldering uses extremely high temperatures. Make sure that the unit is switched off and has cooled down for maintenance purposes.  Remove the tip and clean it after heavy or moderate use. We recommend cleaning the tip daily if the station is used frequently.

  • Page 10: Cleaning And Maintenance

    VTSSD4  F-2: unit of temperature Press the SET button [21] once to enter temperature mode. Press the ▲ [17] or ▼ [18] button to switch between °C and °F. Press the SET button [21] to return to the setup menu.
  • Page 11 VTSSD4  Replace cotton filters at least once every 3 to 5 days if you use the station 8 hours per day.  Replace charcoal filters at least every 3 weeks if you use the station 8 hours per day.
  • Page 12 VTSSD4 11.4 Cleaning the Solder Collector 1. Warning! Switch off the unit and allow it to cool first. 2. Hold the desoldering iron as indicated. Press and turn the red knob on the butt of the iron. 3. Slide out the solder collector. Warning! The solder collector is made of glass and retains heat. Be careful not to burn your fingers.
  • Page 13 VTSSD4 4. Disassemble the solder collector. 5. Remove the old filter and replace it with a new one. In-line Filters 1. Unscrew the in-line filter and pull the two pieces apart. 2. Replace the fillings of both filters. Fume Extractor Filter Only use the fume extractor with the filter installed.

  • Page 14: Technical Specifications

    The information in this manual is subject to change without prior notice. © COPYRIGHT NOTICE The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.
  • Page 15 • Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.

Table of Contents